VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 Hyperfast Rectifier, 30 FRE Pt FETURES Low forward voltage drop Hyperfast soft recovery time 75 operating junction temperature TO-247 Base cathode 4, 2 2 3 2 TO-247 modified Base cathode 2 3 esigned and qualified according to JEE -JES 47 Material categorization: for definitions of compliance please see /doc?9992 vailable 3 node node VS-PH3006-F3 VS-PH3006-N3 PROUT SUMMRY 3 athode node VS-EPH3006-F3 VS-EPH3006-N3 Package TO-247, TO-247 modified (2 pins) I F(V) 30 V R 600 V V F at I F.4 V t rr typ. 27 ns T J max. 75 iode variation Single die ESRIPTION / PPLITIONS Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PF Boost stage in the / section of SMPS, inverters or as freewheeling diodes. The extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. BSOLUTE MXIMUM RTINGS PRMETER SYMBOL TEST ONITIONS MX. UNITS Repetitive peak reverse voltage V RRM 600 V verage rectified forward current I F(V) T = 2 30 Non-repetitive peak surge current I FSM T = 25 220 Operating junction and storage temperatures T J, T Stg -65 to +75 ELETRIL SPEIFITIONS (T J = 25 unless otherwise specified) PRMETER SYMBOL TEST ONITIONS MIN. TYP. MX. UNITS Breakdown voltage, blocking voltage V BR, V R I R = 00 μ 600 - - I F = 30-2.0 2.65 Forward voltage V F I F = 30, T J = 50 -.4.8 V R = V R rated - - 30 Reverse leakage current I R T J = 50, V R = V R rated - - 300 μ Junction capacitance T V R = 600 V - 20 - pf Series inductance L S Measured lead to lead 5 mm from package body - 8.0 - nh V Revision: 08-Jul-5 ocument Number: 9357 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 Reverse recovery time t rr YNMI REOVERY HRTERISTIS (T J = 25 unless otherwise specified) PRMETER SYMBOL TEST ONITIONS MIN. TYP. MX. UNITS T J = 25-26 - ns I F =, di F /dt = 50 /μs, V R = 30 V - 26 35 T J = 25-70 - Peak recovery current I RRM I F = 30 T J = 25-3.5 - di F /dt = 200 /μs T J = 25-7.6 - V R = 200 V T J = 25-50 - Reverse recovery charge Q rr T J = 25-280 - n THERML - MEHNIL SPEIFITIONS PRMETER SYMBOL TEST ONITIONS MIN. TYP. MX. UNITS Maximum junction and storage temperature range T J, T Stg -65-75 Thermal resistance, junction to case R thj - 0.7. /W Thermal resistance, junction to ambient per leg R thj Typical socket mount - - 70 Thermal resistance, case to heatsink R ths Mounting surface, flat, smooth and greased - 0.5 - Weight Mounting torque Marking device ase style TO-247 ase style TO-247 modified - 5.5 - g - 0.2 - oz..2 (0) - PH3006 EPH3006 2.4 (20) kgf cm (lbf in) Revision: 08-Jul-5 2 ocument Number: 9357 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 I F - Instantaneous Forward urrent () 000 00 0 T J = 75 T J = 25 T J = 50 0.0 0.5.0.5 2.0 2.5 3.0 3.5 Reverse urrent - I R (μ) 000 00 0 0. 0.0 0.00 0.000 75 50 25 00 75 50 25 0 00 200 300 400 500 600 V FM - Forward Voltage rop (V) Reverse Voltage - V R (V) Fig. - Typical Forward Voltage rop haracteristics Fig. 2 - Typical Values of Reverse urrent vs. Reverse Voltage 000 Junction apacitance - T (pf) 00 0 0 00 200 300 400 500 600 Reverse Voltage - V R (V) Fig. 3 - Typical Junction apacitance vs. Reverse Voltage 0 Thermal Impedance Z thj ( /W) 0. = 0.5 = 0.2 = 0. = 0.05 = 0.02 = 0.0 Single Pulse (Thermal Resistance) 0.0 E-05 E-04 E-03 E-02 E-0 E+00 t, Rectangular Pulse uration (s) Fig. 4 - Max. Thermal Impedance Z thj haracteristics Revision: 08-Jul-5 3 ocument Number: 9357 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 80 80 llowable ase Temperature ( ) 70 60 50 40 30 20 0 00 90 80 0 0 20 30 40 50 verage Power Loss (W) 60 40 20 RMS Limit = 0.0 = 0.02 = 0.05 = 0. = 0.2 = 0.5 0 0 5 0 5 20 25 30 35 40 45 verage Forward urrent - I F(V) () Fig. 5 - Maximum llowable ase Temperature vs. verage Forward urrent verage Forward urrent - I F(V) () Fig. 6 - Forward Power Loss haracteristics 90 900 80 800 t rr (ns) 70 60 50 40 I F = 30, 25 Q rr (n) 700 600 500 400 300 I F = 30, 25 30 I F = 30, 25 20 typical value 0 00 000 200 I F = 30, 25 0 typical value 0 00 000 di F /dt (/μs) di F /dt (/μs) Fig. 7 - Typical Reverse Recovery vs. di F /dt Fig. 8 - Typical Stored harge vs. di F /dt V R = 200 V 0.0 Ω L = 70 μh.u.t. di F /dt adjust G IRFP250 S Fig. 9 - Reverse Recovery Parameter Test ircuit Revision: 08-Jul-5 4 ocument Number: 9357 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
VS-PH3006-F3, VS-PH3006-N3, VS-EPH3006-F3, VS-EPH3006-N3 (3) 0 I F t a t rr tb (2) I RRM Q rr 0.5 I RRM di (rec)m /dt (5) 0.75 I RRM () di F /dt () di F /dt - rate of change of current through zero crossing (2) I RRM - peak reverse recovery current (3) t rr - reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 I RRM and 0.50 I RRM extrapolated to zero current. Q rr - area under curve defined by t rr and I RRM t rr x I Q RRM rr = 2 (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr ORERING INFORMTION TBLE Fig. 0 - Reverse Recovery Waveform and efinitions evice code VS- E P H 30 06 -F3 2 3 4 5 6 7 - product 2 - Ultrafast MUR series = single diode E = single diode (modified) 3 - P = TO-247 4 - H = hyperfast recovery time 5 - urrent code (30 = 30 ) 6 - Voltage code (06 = 600 V) 7 - Environmental digit: -F3 = RoHS-compliant and totally lead (Pb)-free -N3 = halogen-free, RoHS-compliant and totally lead (Pb)-free ORERING INFORMTION (Example) PREFERRE P/N QUNTITY PER TUBE MINIMUM ORER QUNTITY PKGING ESRIPTION VS-PH3006-F3 25 500 ntistatic plastic tube VS-PH3006-N3 25 500 ntistatic plastic tube VS-EPH3006-F3 25 500 ntistatic plastic tube VS-EPH3006-N3 25 500 ntistatic plastic tube imensions Part marking information LINKS TO RELTE OUMENTS TO-247 TO-247 modified TO-247 TO-247 modified /doc?95542 /doc?9554 /doc?95007 /doc?95442 Revision: 08-Jul-5 5 ocument Number: 9357 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
IMENSIONS in millimeters and inches TO-247 modified - 50 mils L/F Outline imensions B (2) R/2 Q (3) E S 2 (6) Ø P (atum B) Ø K M B M Ø P 2 2 x R (2) 2 3 Thermal pad 4 (5) L L See view B E 2 x b2 3 x b 0.0 M M b4 2 x e View - Plating (b, b3, b5) Base metal E E (c) c (b, b2, b4) Section -, -, E - E View B SYMBOL MILLIMETERS INHES MILLIMETERS INHES NOTES SYMBOL MIN. MX. MIN. MX. MIN. MX. MIN. MX. NOTES 4.65 5.3 0.83 0.209 2 0.5.35 0.020 0.053 2.2 2.59 0.087 0.02 E 5.29 5.87 0.602 0.625 3 2.7.37 0.046 0.054 E 3.46-0.53 - b 0.99.40 0.039 0.055 e 5.46 BS 0.25 BS b 0.99.35 0.039 0.053 Ø K 0.254 0.00 b2.65 2.39 0.065 0.094 L 4.20 6.0 0.559 0.634 b3.65 2.34 0.065 0.092 L 3.7 4.29 0.46 0.69 b4 2.59 3.43 0.02 0.35 Ø P 3.56 3.66 0.4 0.44 b5 2.59 3.38 0.02 0.33 Ø P - 7.39-0.29 c 0.38 0.89 0.05 0.035 Q 5.3 5.69 0.209 0.224 c 0.38 0.84 0.05 0.033 R 4.52 5.49 0.78 0.26 9.7 20.70 0.776 0.85 3 S 5.5 BS 0.27 BS 3.08-0.55-4 Notes () imensioning and tolerance per SME Y4.5M-994 (2) ontour of slot optional (3) imension and E do not include mold flash. Mold flash shall not exceed 0.27 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Thermal pad contour optional with dimensions and E (5) Lead finish uncontrolled in L (6) Ø P to have a maximum draft angle of.5 to the top of the part with a maximum hole diameter of 3.9 mm (0.54") (7) Outline conforms to JEE outline TO-247 with exception of dimension c and Q Revision: 20-pr-7 ocument Number: 9554 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
TO-247-50 mils L/F Outline imensions IMENSIONS in millimeters and inches B (2) R/2 Q (3) E S 2 Ø K M B M (6) Φ P (atum B) 2 Φ P 2 x R (2) 2 3 Thermal pad 4 (5) L L See view B E 0.0 M B M 2 x b2 3 x b 0.0 M M b4 2 x e View - Plating (b, b3, b5) Base metal E E (c) c (b, b2, b4) Section -, -, E - E View B SYMBOL MILLIMETERS INHES MILLIMETERS INHES NOTES SYMBOL MIN. MX. MIN. MX. MIN. MX. MIN. MX. NOTES 4.65 5.3 0.83 0.209 2 0.5.35 0.020 0.053 2.2 2.59 0.087 0.02 E 5.29 5.87 0.602 0.625 3 2.7.37 0.046 0.054 E 3.46-0.53 - b 0.99.40 0.039 0.055 e 5.46 BS 0.25 BS b 0.99.35 0.039 0.053 Ø K 0.254 0.00 b2.65 2.39 0.065 0.094 L 4.20 6.0 0.559 0.634 b3.65 2.34 0.065 0.092 L 3.7 4.29 0.46 0.69 b4 2.59 3.43 0.02 0.35 Ø P 3.56 3.66 0.4 0.44 b5 2.59 3.38 0.02 0.33 Ø P - 7.39-0.29 c 0.38 0.89 0.05 0.035 Q 5.3 5.69 0.209 0.224 c 0.38 0.84 0.05 0.033 R 4.52 5.49 0.78 0.26 9.7 20.70 0.776 0.85 3 S 5.5 BS 0.27 BS 3.08-0.55-4 Notes () imensioning and tolerancing per SME Y4.5M-994 (2) ontour of slot optional (3) imension and E do not include mold flash. Mold flash shall not exceed 0.27 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body Thermal pad contour optional with dimensions and E (5) Lead finish uncontrolled in L (6) Ø P to have a maximum draft angle of.5 to the top of the part with a maximum hole diameter of 3.9 mm (0.54") (7) Outline conforms to JEE outline TO-247 with exception of dimension c and Q Revision: 20-pr-7 ocument Number: 95542 For technical questions within your region: iodesmericas@vishay.com, iodessia@vishay.com, iodeseurope@vishay.com THIS OUMENT IS SUBJET TO HNGE WITHOUT NOTIE. THE PROUTS ESRIBE HEREIN N THIS OUMENT RE SUBJET TO SPEIFI ISLIMERS, SET FORTH T /doc?9000
Legal isclaimer Notice Vishay isclaimer LL PROUT, PROUT SPEIFITIONS N T RE SUBJET TO HNGE WITHOUT NOTIE TO IMPROVE RELIBILITY, FUNTION OR ESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. ll operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. ustomers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHY INTERTEHNOLOGY, IN. LL RIGHTS RESERVE Revision: 08-Feb-7 ocument Number: 9000