507F Multi- Sanitary Ball Valve Full ISO 5 Mounting Pad For Automated & Manual Service Pharmaceutical Bio-Technology Cosmetic Food & Beverage
The 507F Series //5-Way Sanitary Ball Valve The 507F is a true multi-way ball valve with balanced four-seat construction which can reduce the number of process valves required in a piping system. This full port valve is available in a number of flow configurations with both clamp and tube butt weld end connections. Multi-Position ever Handle ISO 5 Mounting Pad Clamp, Tube or Extended Tube Butt Weld Ends Positioning Pin High-Cycle, ive-oaded Stem Packing Multiple Configurations Full Construction Standard Features and Benefits Balanced -Seat or 5-Seat Construction Unlike two-seated diverter valves, the 507F series has four seats (five seats in bottom entry valves) for positive shut-off in the closed position. This true multi-port function can reduce the number of valves required in a process system, and provides engineers greater design flexibility Trunnion Mounted Ball ( / - ) ateral forces in a -way valve can cause unwanted seat distortion. Stem/ball isolation prevents side loading and wear of downstream seats improving performance and service life ISO 5 Mounting Pad High-Cycle, ive-oaded Stem Packing Dynamic loading on stem packing ensures a tight seal through varying pressure and temperature conditions, extending service life and reducing maintenance costs Blow-Out-Proof Stem Stem is bottom loaded to prevent removal when valve is in service Full Design Full port construction improves flow characteristics for greater process efficiencies Options - or 5-way construction with multiple flow patterns Clamp, tube butt weld, extended tube butt weld, or compression end connections 507F Pressure / Temperature Chart Pressure (PSI) 00 000 800 600 00 00 0-0 / - - 0 00 00 00 00 50 Operating Conditions Temperature range (TFM): -0 F ~ 00 F Maximum pressure (TFM): 000 PSI (/ - ), 600 PSI ( - ) Specifications All valves shell and seat tested to ANSI/ASME B6. and API 598 All materials comply with applicable ASTM material specifications (TFM Seats) Temperature ( F) All soft wetted parts comply with FDA CFR Title Part 77
/" ~ " T W OG OP (B.C.) A - A View, Valve Components # Part Name Material Qty. Body A5 Gr. CF8M End Cap A5 Gr. CF8M OB OD / 6 7 7 6 8 M Blind End Cap A5 Gr. CF8M Ball 6SS 5 Stem 6SS 0 6 Seat TFM 5 7 Body Seal PTFE 9 8 5 F E H 8 Thrust Washer PEEK 9 Stem Packing Set TFM 0 Packing Gland 0SS Belleville Washer 0SS 0 Gland Nut 0SS Gland Nut ock Washer 0SS Stop Plate 0SS 5 Positioning Pin 0SS A A' 6 Handle 0SS 7 Handle Nut 0SS 8 Handle Cover Vinyl 9 Body Bolt 0SS 6 0* Stem Set Pin 6SS 9 * Trunnion Bearing PTFE * Trunnion Bolt 0SS Part numbers 0 to are for / - size only. * Trunnion 6SS * Trunnion Seal PTFE Dimensions (Inches) Size Clamp BW M H G B D T E F P W ISO 5 Pattern /.00 5.87 5.7.07 0.9 0.7 0.7 0.6 0.7 0..97 M6 F05.00 / 5.00 7. 5.7.07 0.9 0.79 0.6 0.6 0.7 0..97 M6 F05 5.00 6.00 9.00 7.80.60 0.7 0.98 0.87 0.8.06 0.5.76 M8 F07 9.00 Weight (lbs) / 7.5 0.00 9.8 5.0 0.7.50.7 0.8.79 0.7.0 M0 F0 0.00 8.50.00.0 6.0 0.78.00.87 0.7.0 0.85.0 M0 F0 0.00
" ~ " OD S 6 / 0 5 OB W OP (B.C.) A 6A Valve Components # Part Name Material Qty. Body A5 Gr. CF8M End Cap (small) A5 Gr. CF8M A Blind End Cap (large) A5 Gr. CF8M M Ball 6SS Stem 6SS 5 7 6 0 8 5 Seat TFM 6 Body Seal (small) PTFE 6A Body Seal (large) PTFE 7 Thrust Washer PEEK F 8 Stem Packing Set TFM 9 8 E H 9 Packing Gland 0SS 0 Belleville Washer 0SS Gland Nut 0SS Gland Nut ock Washer 0SS 7 Stop Plate 0SS 9 Positioning Pin 0SS 5 Handle Drive Coupling 0SS 6 Pipe Handle 0SS 7 Handle Bolt 0SS 8 Stem Bearing PEEK 5 6 9 Body Bolt 0SS 0 0 Seat Retainer 6SS Seat Retainer O-Ring Viton 90 Stem Set Pin 6SS Trunnion Bearing PTFE Trunnion Seal PTFE 5 Trunnion 6SS 6 Trunnion Bolt 0SS Size Clamp BW Dimensions (Inches) M H D B S E F P W ISO 5 Pattern Weight (lbs) 0.50.00.00 7.50.87.9 0.87. 0.9.0 M0 F0 57.00.50.00.00 8.0.8.78 0.87.5 0.90.0 M0 F0 75.00
Pattern Options Way - Side, T- 0 90 A & B 0 90 B & C 0 90 C & D 0 90 D & A 80 A & B & C 80 B & C & D 80 C & D & A 80 D & A & B 00 60 All typically enters from either side of the run Way - Side, - 0 90 A & B Position D Position C typically enters from the branch Way - Bottom, 80 Angle 0 90 A & B 0 90 B & C 80 A & B & C Way - Bottom, 90 Angle 0 90 A & B Position C typically enters from bottom of the valve typically enters from bottom of the valve Way - Bottom, Angle 0 90 A & B 0 90 B & C 80 A & B & C 00 60 All Way - Side, Double - 0 90 A & B 00 60 All Position C typically enters from bottom of the valve typically enters from both sides of the run Way - Bottom, - 0 90 A & B 5 Way - Bottom, Angle 0 90 A & B 00 60 All typically enters from bottom of the valve typically enters from bottom of the valve
Direct Mount Products Automation Systems 507F Ordering Information Example: Multi- Ball Valve, Full, 6SS Body and Trim, TFM Seats and PTFE Seals, Clamp Ends, -Way, Side, -, Pattern 0* 507F 0 6 M T C S 0 Valve Series Valve Size Body and Trim Material Seat Seal End Connection Config. Ball Config. Pattern* 507F - Full 0 06 0 0 0 0 / / / 6 - A5 Gr. CF8M Body (6) A5 Gr. CF8M Trim (6) M - TFM T - C - Clamp - S - T - PTFE PTFE O - Tube Butt Way Side P - PEEK U - Weld - (PTFE and UHMWPE E - Extended Way B - Carbon Filled B - Tube Butt 5 - Bottom PEEK) U - UHMWPE Buna N E - EPDM (Food Weld P - Compression Ends 5 Way Grade) V - Viton (Food Grade) G - Grafoil M - TFM A - Angle 8-80 Angle 9-90 Angle T - T - - - S - Straight D - Double - 99 - Adjust in Field 00 0 0 0 0 Due to continuous product development, information may change without notice. * See Pattern Options. Distributed by: ININE INDUSTRIES, INC. 70-A ittlejohn Street Baldwin Park, CA 9706 Tel: (66) 8-688 Fax: (66) 8-686 www.ballvalve.com info@ballvalve.com 00 Inline Industries. All rights reserved. 006.