SiC Silicon Carbide Diode thinq! TM SiC Schottky Diode 12V SiC Schottky Diode IDW 1 S 1 2 Final Datasheet Rev. 2.,<212-3-23> Power Management & Multimarket
thinq! SiC Schottky Diode 1 Description The 12V family of Infineon SiC Schottky diodes has emerged over the years as the industry standard and is now being extended with the IDWxxS12 product family in the TO247 package. The very good thermal characteristics of the TO247 in combination with the low V f of the 12V diodes make it particularly suitable in power applications where relatively high currents are demanded and utmost efficiency is required. With the introduction of this package, Infineon now offers a current capability of up to 3A in the 12V range. Features Revolutionary semiconductor material - Silicon Carbide Benchmark switching behavior No reverse recovery/ No forward recovery Temperature independent switching behavior High surge current capability Pb-free lead plating; RoHS compliant Qualified according to JEDEC 1) for target applications Optimized for high temperature operation Benefits System efficiency improvement over Si diodes System cost / size savings due to reduced cooling requirements Enabling higher frequency / increased power density solutions Higher system reliability due to lower operating temperatures Reduced EMI Applications SMPS; CCM PFC Solar applications; UPS; Motor Drives Table 1 Key Performance Parameters Parameter Value Unit V DC 12 V Q C @ V R =4V 36 nc I F @ T c < 14 C 1 A Table 2 Pin Definition Pin 1 Pin 2 Pin 3 n.c. C A 1 2 1 2 3 3 CASE Type / ordering Code Package Marking Related links PG-TO247-3 D1S12 www.infineon.com/sic 1) J-STD2 and JESD22 Final Data Sheet 2 Rev. 2., 212-3-23
thinq! TM SiC Schottky Diode Table of contents Table of Contents 1 Description... 2 2 Maximum ratings... 4 3 Thermal characteristics... 4 4 Electrical characteristics... 5 5 Electrical characteristics diagrams... 6 6 Package outlines... 8 7 Revision History... 9 Final Data Sheet 3 Rev. 2., 212-3-23
thinq! TM SiC Schottky Diode Maximum ratings 2 Maximum ratings Table 3 Maximum ratings Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. Continuous forward current I F 1 Surge non-repetitive forward current, sine halfwave T C < 14 C, D=1 I F,SM 53 T C = 25 C, t p =1 ms A 44 T C = 15 C, t p =1 ms Non-repetitive peak forward current I F,max 266 T C = 25 C, t p =1 µs i²t value i²dt 14 A²s T C = 25 C, t p =1 ms Repetitive peak reverse voltage V RRM 12 V 1 T C = 15 C, t p =1 ms Diode dv/dt ruggedness dv/dt 5 V/ns V R =..48 V Power dissipation P tot 115 W T C = 25 C Operating and storage temperature T j ;T stg -55 175 C Mounting torque 6 Ncm M3 and M3.5 screws 3 Thermal characteristics Table 4 Thermal characteristics TO-247-3 Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. Thermal resistance, junction-case R thjc 1.3 Thermal resistance, junctionambient Soldering temperature, wavesoldering only allowed at leads R thja 62 K/W leaded T sold 26 C 1.6mm (.63 in.) from case for 1 s Final Data Sheet 4 Rev. 2., 212-3-23
thinq! TM SiC Schottky Diode Electrical characteristics 4 Electrical characteristics Table 5 Static characteristics Parameter Symbol Values Unit Note/Test Condition Min. Typ. Max. DC blocking voltage V DC 12 I R =.24 ma, T j = 25 C Diode forward voltage V F 1.5 1.8 V I F = 1 A, T j =25 C 2.4 I F = 1 A, T j =15 C Reverse current I R 5 24 V R =12 V, T j =25 C µa 2 5 V R =12 V, T j =15 C Table 6 AC characteristics Parameter Symbol Values Unit Note/Test Condition Total capacitive charge Q c Min. Typ. Max. 36 55 Total Capacitance C 58 nc V R =4 V, di/dt=2a/µs, I F I F,MAX, T j =15 C. V R =1 V, di/dt=2a/µs, I F I F,MAX, T j =15 C. V R =1 V, f=1 MHz 5 pf V R =3 V, f=1 MHz 4 V R =6 V, f=1 MHz Final Data Sheet 5 Rev. 2., 212-3-23
I F [ A] I R [A] P tot [W] I F [A] thinq! TM SiC Schottky Diode Electrical characteristics diagrams 5 Electrical characteristics diagrams Table 7 Power dissipation Diode forward current 14 12 1 8 6 4 2 8 7 6 5 4 3 2 1.1.3.5.7 1 25 5 75 1 125 15 175 T C [ C] P tot =f(t C ); R thjc,max 25 5 75 1 125 15 175 T C [ C] I F =f(t C ); T j 175 C; R thjc,max ; parameter D=duty cycle Table 8 Typical forward characteristics Typ. reverse current vs. reverse voltage 2 18-55 C 25 C 1.E-4 16 1 C 1.E-5 14 12 15 C 175 C 1.E-6 175 C 15 C 1 8 1.E-7 1 C 6 4 1.E-8 25 C 2.5 1 1.5 2 2.5 3 3.5 4 4.5 V F [V] -55 C 1.E-9 2 4 6 8 1 12 V R [V] I F =f(v F ); t p =2 µs; parameter: T j I R =f(v R ); parameter: T j ; Final Data Sheet 6 Rev. 2., 212-3-23
E C [µj] C [pf] Q C [nc] Z th,jc [K/W] thinq! TM SiC Schottky Diode Electrical characteristics diagrams Table 9 Typ. capacitance charge vs. current slope 1) Max. transient thermal impedance 4 35 1 3 25 2 15 1.1.5.2.1.5.2.1 single pulse 5 1 3 5 7 9 di F /dt [A/µs].1 1.E-6 1.E-3 1.E+ t p [s] Q C =f(di F /dt); V R =4V; T j =15 C; I F I F,max Z th,jc =f(t P ); parameter: D=t P /T 1) Only capacitive charge, guaranteed by design. Table 1 Typ. capacitance stored energy 3 25 2 Typ. capacitance vs. reverse voltage 8 7 6 5 15 1 5 4 3 2 1 2 4 6 8 1 12 V R [V].1 1 1 1 1 V R [V] E C =f(v R ) C=f(V R ); T j =25 C; f=1 MHz Final Data Sheet 7 Rev. 2., 212-3-23
thinq! TM SiC Schottky Diode Package outlines 6 Package outlines Figure 1 Outlines TO-247, dimensions in mm/inches Final Data Sheet 8 Rev. 2., 212-3-23
thinq! TM SiC Schottky Diode Revision History 7 Revision History thinq! TM SiC Schottky Diode Revision History: 212-3-23, Rev. 2. Previous Revision: Revision Subjects (major changes since last version) We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: erratum@infineon.com Edition 212-3-23 Published by Infineon Technologies AG 81726 Munich, Germany 212 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. The Infineon Technologies component described in this Data Sheet may be used in life-support devices or systems and/or automotive, aviation and aerospace applications or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support, automotive, aviation and aerospace device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Final Data Sheet 9 Rev. 2., 212-3-23
w w w. i n f i n e o n. c o m Published by Infineon Technologies AG
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Infineon: FKSA1