Chapter 4 Practice Problems

Similar documents
Chapter 2 Solutions. 2.1 (D) Pressure and temperature are dependent during phase change and independent when in a single phase.

KNOWN: Pressure, temperature, and velocity of steam entering a 1.6-cm-diameter pipe.

= 0, no work has been added

Chemistry 531 Spring 2009 Problem Set 6 Solutions

Thermodynamic Properties are Measurements p,t,v, u,h,s - measure directly -measure by change

Chapter 9 Practical cycles

(b) The heat transfer can be determined from an energy balance on the system

Chapter 1 Fundamentals

Chapter-6: Entropy. 1 Clausius Inequality. 2 Entropy - A Property

ME Thermodynamics I

Chapter 20: Exercises: 3, 7, 11, 22, 28, 34 EOC: 40, 43, 46, 58

Efficiencies. Damian Vogt Course MJ2429. Nomenclature. Symbol Denotation Unit c Flow speed m/s c p. pressure c v. Specific heat at constant J/kgK

COMPENDIUM OF EQUATIONS Unified Engineering Thermodynamics

Phase transition. Asaf Pe er Background

dn i where we have used the Gibbs equation for the Gibbs energy and the definition of chemical potential

Liquid water static energy page 1/8

Principles of Food and Bioprocess Engineering (FS 231) Solutions to Example Problems on Evaporation

Unit code: H/ QCF level: 5 Credit value: 15 OUTCOME 1 - THERMODYNAMIC SYSTEMS TUTORIAL 2

Engineering Services Examination - UPSC MECHANICAL ENGINEERING. Topic-wise Conventional Papers I & II (Last 30 Years Questions)

PHYS1001 PHYSICS 1 REGULAR Module 2 Thermal Physics Chapter 17 First Law of Thermodynamics

4200:225 Equilibrium Thermodynamics

Theory of turbomachinery. Chapter 1

HEAT, WORK, AND THE FIRST LAW OF THERMODYNAMICS

Lecture 13. Heat Engines. Thermodynamic processes and entropy Thermodynamic cycles Extracting work from heat

I have not proofread these notes; so please watch out for typos, anything misleading or just plain wrong.

Lecture 13 Heat Engines

SPC 407 Sheet 6 - Solution Compressible Flow Fanno Flow

Answer Key THERMODYNAMICS TEST (a) 33. (d) 17. (c) 1. (a) 25. (a) 2. (b) 10. (d) 34. (b) 26. (c) 18. (d) 11. (c) 3. (d) 35. (c) 4. (d) 19.

Consequences of Second Law of Thermodynamics. Entropy. Clausius Inequity

I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit.

Name: I have observed the honor code and have neither given nor received aid on this exam.

δq T = nr ln(v B/V A )

PV/T = k or PV = kt Describe the difference between an ideal gas and a real gas.

NODIA AND COMPANY. GATE SOLVED PAPER Mechanical Engineering Thermodynamics. Copyright By NODIA & COMPANY

300 kpa 77 C. (d) If we neglect kinetic energy in the calculation of energy transport by mass

F = U TS G = H TS. Availability, Irreversibility S K Mondal s Chapter 5. max. actual. univ. Ns =

Thermodynamics I Chapter 6 Entropy

FINITE TIME THERMODYNAMIC MODELING AND ANALYSIS FOR AN IRREVERSIBLE ATKINSON CYCLE. By Yanlin GE, Lingen CHEN, and Fengrui SUN

Find: a) Mass of the air, in kg, b) final temperature of the air, in K, and c) amount of entropy produced, in kj/k.

CHAPTER 2 ENERGY INTERACTION (HEAT AND WORK)

High speed wind tunnels 2.0 Definition of high speed. 2.1 Types of high speed wind tunnels

Consequences of Second Law of Thermodynamics. Entropy. Clausius Inequity

5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE

Chemistry 420/523 Chemical Thermodynamics (Spring ) Examination 1

I affirm that I have never given nor received aid on this examination. I understand that cheating in the exam will result in a grade F for the class.

Chapter 7 Energy Principle

Mixture Homogeneous Mixtures (air, sea water ) same composition, no chemical bond components are NOT distinguishable

whether a process will be spontaneous, it is necessary to know the entropy change in both the

THE FIRST LAW OF THERMODYNAMICS

1. Read the section on stability in Wallace and Hobbs. W&H 3.53

The Role of Water Vapor. atmosphere (we will ignore the solid phase here) Refer to the phase diagram in the web notes.

Setting up the Mathematical Model Review of Heat & Material Balances

ANALYTICAL MODEL FOR THE BYPASS VALVE IN A LOOP HEAT PIPE

c Dr. Md. Zahurul Haq (BUET) Entropy ME 203 (2017) 2 / 27 T037

Ideal Gas Law. September 2, 2014

CHAPTER 2 Fluid Statics

The extreme case of the anisothermal calorimeter when there is no heat exchange is the adiabatic calorimeter.

Example problems. Chapter 3: The Kinetic Theory of Gases. Homework: 13, 18, 20, 23, 25, 27 (p )

CHEE 221: Chemical Processes and Systems

FUGACITY. It is simply a measure of molar Gibbs energy of a real gas.

ME Thermodynamics I

Actual exergy intake to perform the same task

S = = = nrln = 10.0 mol ln = 35.9

CHAPTER 20. Answer to Checkpoint Questions. 1. all but c 2. (a) all tie; (b) 3, 2, 1

Compressible Flow Introduction. Afshin J. Ghajar

Thermodynamics I Chapter 2 Properties of Pure Substances

Dishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points)

First Name Last Name CIRCLE YOUR LECTURE BELOW: Div. 1 10:30 am Div. 2 2:30 pm Div. 3 4:30 pm Prof. Gore Prof. Udupa Prof. Chen

Exergy and the Dead State

4. Energy balances Partly based on Chapter 4 of the De Nevers textbook.

First law of thermodynamics (Jan 12, 2016) page 1/7. Here are some comments on the material in Thompkins Chapter 1

Name: Discussion Section:

What is Physical Chemistry?

Homework #11. (Due December 5 at the beginning of the class.) Numerical Method Series #6: Engineering applications of Newton-Raphson Method to

Chapter 6. Using Entropy

Chapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn

CHAPTER 2 Fluid Statics

Homogeneous and Inhomogeneous Model for Flow and Heat Transfer in Porous Materials as High Temperature Solar Air Receivers

CHAPTER 8 ENTROPY. Blank

Content. Entropy and principle of increasing entropy. Change of entropy in an ideal gas.

The International Association for the Properties of Water and Steam

Introduction to Engineering thermodynamics 2 nd Edition, Sonntag and Borgnakke. Solution manual

MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI

CHAPTER 2 THERMODYNAMICS

To receive full credit all work must be clearly provided. Please use units in all answers.

MODULE 2: DIFFUSION LECTURE NO. 2

An-Najah National University Civil Engineering Departemnt. Fluid Mechanics. Chapter [2] Fluid Statics

Assignment Set 2 - Solutions Due: Wednesday October 6; 1:00 pm

Lecture 1.2 Units, Dimensions, Estimations 1. Units To measure a quantity in physics means to compare it with a standard. Since there are many

Using first law of thermodynamics for a constant pressure system: Using first law of thermodynamics for a constant volume system:

THERMODYNAMICS. Prepared by Sibaprasad Maity Asst. Prof. in Chemistry For any queries contact at

a) Derive general expressions for the stream function Ψ and the velocity potential function φ for the combined flow. [12 Marks]

MAE 320 HW 7B. 1e. For an isolated system, please circle the parameter which will change with time. (a) Total energy;

AE301 Aerodynamics I UNIT A: Fundamental Concepts

ME 201 Thermodynamics

Example problems. Chapter 2: Temperature, heat, and the 1 st law of Thermodynamic. Homework: 2, 3, 4, 5, 6, 10, 15, 19, 21 (pages )

0 o C. H vap. H evap

02. Equilibrium Thermodynamics II: Engines

Transcription:

Chater 4 ractice roblems (4.) (a) the number of microstates is N (b) 3 articles total 3! {, } 3 number microstates of secific arrangement (macrostate)!*! robability = (# microstates of secific arrangement)/(total # of microstates) rob 3 3 3 8 (c ) # microstates. (d) {,} {3,} {4,} {3,3 } 4! 6!*! 5! 0 3!*! 6! 5 4!*! 6! 0 3!*3! macrostate # of microstates* 0 8 7 8 6 8 3 5 56 4 4 70 5 3 56 6 8 7 8 8 0 8! * number of microstates = m!(8 m)! total number of microstates is 8 = 56, which is the same as the sum from the table. ortion of microstates (robability) for requested configurations: {5:3} = 56/56 = 0.9 = % {4:4} = 70/56 = 0.73 = 7% {3:5) = % like {5:3} robability of any one of the three most evenly distributed states = % + 7% + % = 7% (e) for 8 article system, tirling s arox will not aly /k = ln({4:4}/{5:3}) = ln (70/56) = 0.3 o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) of 7

(4.) Initial ( each x reresents 5 molecule) xxxx Chater 4 ractice roblems Final x x x x Create a sace with a three emty boxes for the initial state. he number of molecules is too small to use tirling s aroximation. = 0!/(0!0!0!0!) = = 0!/(5!5!5!5!) = 0*9*8*7*6*5*4*3***0*9*8*7*6/(5*4*3*)^3 = 7374504 /k = ln(/) = ln(7374504) = 3.8 (4.3) 5 molecules in 3 boxes, molecules are identical j N!...Eqn. 4.4 m! i ij 5! 9!4!! 5! (5!) 3 75075 756756 k ln.3 (4.4) two dice.?? for going from double sixes to a four and three. k for double sixes, we have robability of /6 for each dice.!!*! 6 6 for one four and one three robability alied for /6 for each one in each dice,! *!*! 6 6 ln ln 0.693 k (4.5) =?? Assume Nitrogen is an Ideal gas V R. Eqn.. o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) of 7

3 8.34cm * Ma / mole K Chater 4 ractice roblems *300K 0. 08Ma 3 3L / mole*(000cm /L) imilarly 0. 0073Ma C ln R ln Eqn. 4.9 7R C..(ig) 7R 400 0.0073 * ln 8.34 * ln 30.88J / mole K.07kJ K 300 0.08 (4.6) (a) m-balance: dn in = -dn -balance: in d( n) dn in in in in n d dn dn dt dt But hysically, we know that the leaking fluid is at the same state as the fluid in the tank; therefore, the -balance becomes: inside inside ( nd dn) ( dn), and dn dn so 0 from the steam table. tate (Ma) O C (kj/kg) (kj/kg*k) (in) 400 364.5 7.4669 () 0. 0.8 77.86 7.4669 By interolation, imlies = 0.8 O C (4.7) (a) teady-state flow, = Ws At bar = 0. Ma 00 7.36 0.8 7.4669 50 7.648 tart mole basis: x 0.333, x 0.667, adiabatic, C xc xc, C for each is the same anyway. MW xmw xmw 0.333( 6) 0.667 * 0.66( g / mole) R =.987BU/lbmol-R. W Cd 7 * 6954.5BU / lbmol & m ton / h 000lb / h. & MW 0.66lb / lbmol 000lb lbmol 6954.5BU * * h 0.66lb lbmol 6 W,305,000.3*0 BU / h (b)?? of the comressor. R * 00 00 R o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) 3 of 7

Chater 4 ractice roblems o find the efficiency of the comressor, = But the enthaly and the internal energy will change which gives a change in the ' W Work.?? W 0 C ln R ln C ln R ln C R C 7 R * 00 *559R 5 35R & C( ) 6.95(35 559) 558BU / lbmol 558 6955 (4.8) Adiabatic, steady-state oen system Q = 0, &(C/R = 7/) ig 65 7R kmole W Cd * (65 300) 9457.75kJ / kmole * 337.76kJ 8kg 300?? 0 533.5K 7 *8.34 C 6794.77kJ / mol R C * 533.5 300 0.76 6794.77kJ / kmol 337.76kJ * 8kg / kmol 7.8% 0.78 (4.9) work required er kg of steam through this comressor? By looking at the steam table in the back of the book (Ma) ( O C) (kj/kg) (kj/kg-k) o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) 4 of 7

0.8 00 839.7 6.876 4 500 3446 7.09 Chater 4 ractice roblems W 3446 839.7 606.3kJ now find W =?? = 0 (reversible), look in the steam table (@ = 4.0Ma) to find a similar value for = 6.876kJ/kg-K, if this value is not available so find it by interolation. 333.5 ' 6.9386 6.876, ' 346.7 333. 34.5 6.9386 6.774 ' W ' 346.7 839.7 407kJ 407 606.3 (kj/kg) (kj/kg-k) 34.5 6.774 ' =?? ' = 6.876 333. 6.9386 0.67, 67% (4.0)@ =.0 Ma & = 600 O C, = 3690.7 kj/kg, = 7.7043kJ/kg-K (team table) O C L (kj/kg) va (kj/kg) steam table 0 83.9 453.5 Interolation 4 00.646 444.098 steam table 4 04.83 44.68 Va L q( ) 006.46 0.98*(44.68) 493k.49J W 3690.7 493.49 97.kJ W??,, ' W ' = 0 ( reversible), look for in the sat d tem. steam table and find by interolation, W ' 408.0kJ 97. 0.8503, 85% 408.0 (4.) 0.Ma, at' d 0Ma 00 O C va tate (Ma) ( O C) (kj/kg) (kj/kg-k) o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) 5 of 7

Chater 4 ractice roblems 0. 99.6 674.95 7.3589 ' 0 406.53 7.3589 0 00 4870.3 8.088 interolation for above table: ' = 406.53 (interolation) (kj/kg) (kj/kg-k) 399 7.96 406.53 7.3589 44.5 7.4085 W 4870.3 674.95 95.35kJ mass flow rate = kg/s W 95.35kJ / s 95350watt &watt 0.00340h W 944.0h & 406.53 674.95 387.58kJ 63.% (4.) Ebal: Δ = W. 387.58 95.35 0.63 R bal: Δ rev rev C = 0 => => rev = (0+73)*8^(8.34/44) = 506K. W rev = C ( rev - ) = 44*(506-93) = 937J/mol => W act = 937/0.85 = 3.4kJ/mol W act = C ( act - ) = 3400 => act = (3400/44)+93 = 597K (4.5) hrough the valve in in 3Ma O 0. Ma 0 C 383. K (By interolation) Find from steam table. 5 50 0 50 00 776.6 776.6 675.8 = 695.96 kj/kg At 3Ma table use same value for in to find in By interolation 856.5 695.96 856.5 803. in 6.893 6.893 6.856 in = 5.976kJ/kg-K o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) 6 of 7

Chater 4 ractice roblems he rocess should be irreversible. o find, interolate using temerature at 0. Ma: 50 0 50 00 7.648 7.648 7.360 = 7.48 kj/kg-k, since > in entroy has been generated. he entroy balance is: in in 0 m m gen (4.8) An insulated cylinder is fitted with a freely floating iston,... team 0.5kg, i = 9 bars, q=0.9, goes to satd vaor at 30 bars, W air = -360 kj. he volume change of the air is equal and oosite the volume change of the steam. he volume change of the steam is (using sat roerties at 0.9 Ma) V i steam = 0.5kg (V satl + q (V satv V satl ))m 3 /kg = 0.5(0.00 + 0.9(0.49-.00)) = 0.09676m 3 V f steam = 0.5*V satv = 0.5kg*.0667m 3 /kg = 0.03335 m 3 ; V steam = 0.03335 0.09876 = - 0.0654 m 3. V f air = V i air + V air = 0.05 + 0.0654 = 0.54 m 3 Because we are not told the mass and area of the iston, let us consider it massless, so that the initial ressure of the air is 9 bar and the final ressure is 30bar. he air will be treated like an ideal gas. d(nu)= in dn + dwair; integrate term-by-term n f U f n i U i = in (n f n i ) -360 for the air, let R = 0 for 50 bar and 300K, the inlet condition. n i = V/R = 0.9Ma (0.05m 3 )(0 6 cm 3 /m 3 )/8.3447 (cm 3 -Ma)/300 = 8.04 moles n f = V/R = 3Ma(0.54m 3 )(0 6 cm 3 /m 3 )/8.3447 (cm 3 -Ma)/ f air = 4638/ f air moles Let R =0 at 50 bar and 300K U R = R -(V)=0-R R = -494.3 J/mol Because U is indeendent of, then U i = U R = -494.3 J/mol. For air, use Cv =.5R = 0.786 J/mol-K he energy balance becomes 4638/ f air [0.786( f air -300) -494.3] J= -360000 J rial&error f = 97 K; the temerature change is very small for this case. o accomany Introductory Chemical Engineering hermodynamics J.R. Elliott, C.. Lira, 00-04, all rights reserved. (/6/04) 7 of 7