Material Safety Data Sheet. ACS Material Graphene Nanoplatelets

Similar documents
Material Safety Data Sheet. ACS Material Graphene Quantum Dots (GQDs)

Material Safety Data Sheet. ACS Material High Surface Area Graphene Oxide

Material Safety Data Sheet

Material Safety Data Sheet

MSDS. ( Material Safety Data Sheet ) High Density Polyethylene (LUTENE-H ME9180)

Safety Data Sheet. (Silicon Dioxide) DATE PREPARED: 1/6/2016. Section 1. Product and Company Identification

Safety Data Sheet. Identification of the substance/mixture, intended use and of the company/undertaking

SECTION 3 PRODUCT COMPOSITION The test kit is composed of QuSTICK Strep A Reagent Stick, Reagent A, Reagent B, Positive Control, and Negative Control.

Material Safety Data Sheet

Material Safety Data Sheet

SAFETY DATA SHEET (SDS) LOX-8 PASTE. 1. Identification of the substance/mixture and of the company/undertaking

开原亨泰精细化工厂. Kaiyuan Hengtai Fine Chemicals Factory. Material Safety Data Sheet. 4-Aminobutyric acid. Approved By IATA Regulation

Material Safety Data Sheet C3 Extraction Solution

MATERIAL SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet

Safety Data Sheet C3 Extraction Solution

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO/DIS 11014

QRëC. Component CAS Number Concentration % Barium Chloride dihydrate

1 PRODUCT AND COMPANY IDENTIFICATION. Manufacturer. Description: Natural occuring clay mineral SDS. GHS Safety Data Sheet. PROFILE Products, LLC

Hazard Communication & Chemical Safety. Based on OSHA Standard

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO/DIS 11014

SIGMA-ALDRICH. SAFETY DATA SHEET Version 4.2 Revision Date 03/07/2014 Print Date 04/19/2014

M A T E R I A L S A F E T Y D A T A S H E E T Page 1 of 5

Material Safety Data Sheet acc. to ISO/DIS 11014

1 PRODUCT AND COMPANY IDENTIFICATION. Manufacturer. HAZARDS IDENTIFICATION Classification of the Substance or Mixture

Material Safety Data Sheet acc. to ISO/DIS 11014

MATERIAL SAFETY DATA SHEET Graphene nanoplatelets

Material Safety Data Sheet acc. to ISO/DIS 11014

Issue Date 04-May-2015 Revision Date 20-May-2015 Version 2 1. IDENTIFICATION CALCIUM HYDROXIDE HP-XL. No information available.

QRëC SDS. Safety Data Sheet

Material Safety Data Sheet acc. to ISO/DIS 11014

Material Safety Data Sheet acc. to ISO 11014

Kit Components Salmonella O Antiserum Group C1 Factors 6,7

Kit Components Salmonella O Antiserum Group C3 Factors 8,20. Components: Salmonella O Antiserum Group C3 Factors 8,20 (w/ thimerosal)

Kit Components Directigen Group B Strep Test Kit. Components: Reagent 1, Group B Strep Antibody (w/ sodum azide)

Kit Components Shigella Antiserum Poly Group A

Kit Components Shigella Antiserum Poly Group C2

Globally Harmonized System of Classification and Labeling of Chemicals (GHS) LC-1033p Rev. 06/16

Safety Data Sheet. Fatal if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. Fatal if inhaled.

Changes to Materials Data Safety Sheets (MSDS)

LABORATORY CHEMICAL HYGIENE PLAN

Material Safety Data Sheet acc. to ISO/DIS 11014

Safety Data Sheet. 1. Identification of the Substance/Mixture and the Supplier. 2. Hazards Identification

SECTION 1. Identification of the substance/mixture and of the company/undertaking. Low Density Polyethylene LF2207M

HAZARD COMMUNICATION PROGRAM 2015 UPDATE GHS AWARENESS TRAINING CSULB COE

Concentrated Nitric with 2% Sulfuric Acid

MATERIAL SAFETY DATA SHEET

Safety Data Sheets (SDS)

SAFETY DATA SHEET 1 IDENTIFICATION.

Summary of OSHAs New Hazard Communication Standard The Globally Harmonized System of Classification and Labeling of Chemicals

Material Safety Data Sheet

Issue Date: 01-Sep-2012 Revision Date: 16-Jul-2014 Version 1 1. IDENTIFICATION. Slide Lecithin Mold Release 2. HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Material Safety Data Sheet

View Section :

7/8/2013. What is GHS?

GHS SAFETY DATA SHEET (SDS)

MATERIAL SAFETY DATA SHEET

Hazard Communication for Dangerous and Harmful Materials

MATERIAL SAFETY DATA SHEET

Hazcom 2012: Changes to the OSHA Hazard Communication Standard. Risk Engineering

MATERIAL SAFETY DATA SHEET

Safety Data Sheet acc. to OSHA HCS

MATERIAL SAFETY DATA SHEET. QuickGene DNA whole blood kit S KURABO INDUSTRIES LTD. Bio-Medical Department

HazCom and Global Harmonization Are You In Compliance? BISC June, 2018

Material Safety Data Sheet acc. to ISO/DIS 11014

Kit Components Vibrio Cholerae Antiserum Inaba

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet acc. to ISO/11014:2009

MATERIAL SAFETY DATA SHEET. QuickGene RNA cultured cell HC kit S KURABO INDUSTRIES LTD. Bio-Medical Department

DRAIN TRACING DYE RED E123

Laboratory Chemical Safety. Pathology Training

SAFETY DATA SHEET DIAMOND SEAL

LABELS AND SAFETY DATA SHEETS

SAFTY DATA SHEET. Revised Date 1/30/2017

Associates of Cape Cod, Inc.

Material Safety Data Sheet

EZ EDgE TrAnSiTiOnS Valley Court, Chico. CA

Safety Data Sheet acc. to OSHA HCS

SAFETY DATA SHEET QUIK-TROL GOLD

1. 4. E m e r g e n c y te l e p h o n e n u m b e r : Infotrac (Contract# ) Dial when outside the US

SAFETY DATA SHEET. Creation Date 22-Sep-2009 Revision Date 18-Jan-2018 Revision Number 4 BP2438-4; BP ; XXBP243865ML; NC

Safety Data Sheet acc. to OSHA HCS

1. Employees need to be trained in understanding Material Safety Data Sheets. A. True B. False

Safety Data Sheet. 1. Identification of the Substance/Mixture and the Supplier. 2. Hazards Identification

HAZARD COMMUNICATION and GHS. Environmental Health and Safety

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

SAFETY DATA SHEET. Chemical Stewardship Telephone: May form combustible dust concentrations in air.

Safety Data Sheet. 1. Identification of the Substance/Mixture and of the Supplier. 2. Hazards Identification

WHAT S WRONG WITH THIS PICTURE?

CHEMTREC: (For USA, and Canada) CHEMTREC: (For all other Countries)

Safety Data Sheet acc. to OSHA HCS

Transcription:

Health 1 Flammability 1 Reactivity 0 Personal Protection E Material Safety Data Sheet ACS Material Graphene Nanoplatelets Table of contents 1 Product and Company Identification 9 Physical and Chemical Properties 2 Composition / Information on Ingredients 10 Stability and Reactivity 3 Hazards Identification 11 Toxicological Information 4 First Aid Measures 12 Ecological Information 5 Firefighting Measures 13 Disposal Considerations 6 Accidental Release Measures 14 Transport Information 7 Handling and Storage 15 Regulatory Information 8 Exposure Controls, Personal Protection 16 Other Information Table of Contents ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 1

1. Product and Company Identification Product Name: ACS Material Graphene Nanoplates Synonyms: Graphene, Graphite Nanoplates, Graphene sheets, Exfoliated Graphite. CAS NO.: 7782-42-5 (graphite). Contacting Information: Manufacturer: ACS Material, LLC. Address: 18 Vernon Street, Medford, MA 02155 Phone: (866)-227-0656 Fax: (781)-518-0284 E-Mail: contact@acsmaterial.com 2. Composition/Information on Ingredients Ingredient CAS No Amount Carbon 7440-44-0 >99.0% 3. Hazards Identification Potential Acute Health Effects: Slightly hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Potential Chronic Health Effects: CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. The substance is toxic to upper respiratory tract. The substance may be toxic to cardiovascular system. Repeated or prolonged exposure to the substance can produce target organs damage. 4. First Aid Measures Eyes: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation occurs. Skin: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. Serious Inhalation: Not available. ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 2

Ingestion: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband. Serious Ingestion: Not available. 5. Fire Fighting Measures In general, graphene is difficult to combust. Normal care should be taken to avoid dust explosion risk through high concentrations of dust or finely-suspended airborne particles, although graphene dust is not normally considered an explosion hazard. Suitable Extinguishing Media: water, carbon dioxide, dry chemical powder or foam as appropriate for surroundings. Other Combustion Hazards: in the event of combustion or thermal decomposition, this material may release carbon monoxide (CO) or carbon dioxide (CO2) or other toxic gases. At temperatures over 300o C. this material may react with potassium, sodium, rubidium, or cesium to create intercalation compounds that may ignite and may react explosively with water. Protective Equipment: As with any fire, wear self-contained breathing apparatus and protective clothing to prevent contact with skin, eyes or lungs. 6. Accidental Release Measures Spilled or released material should be collected mechanically and disposed of in suitable containers. Use care during cleanup to prevent the creation of concentrations of dust. Personnel: Clean-up personnel should wear suitable protective equipment to prevent inhalation or skin contact. Cleanup personnel should beware of the risk of slippage due to the material s low coefficient of friction. Environmental: Do not discharge into storm or sanitary sewers or groundwater. 7. Handling and Storage This material is stable at room temperature and does not pose a significant risk of combustion. This material should be stored in labeled, closed containers away from sources of ignition or heat. Care should be taken to avoid creating accumulations or concentrations of dust, since any dust can form a potentially explosive mixture in air. Graphene is electrically conductive. Care should be taken, therefore, to avoid accumulations of graphene dusts or powders in places where these accumulations could cause shorting of electrical switches, circuits or components. ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 3

Advice on Safe Handling: Provide good ventilation when handling. Personnel should take measures to avoid breathing dust created when handling and should wear suitable protective clothing to prevent skin and eye contact. 8. Exposure Controls, Personal Protection Exposure Guidelines Graphite (CAS no. 7782-42-5) TWA: ACGIH (TLV): 2.0 mg/m3 respirable OSHA (PEL): 15 ml/m3 respirable Crystalline Silica (CAS no. 14808-60-7) TWA: ACGIH (TLV): 0.025 mg/m3 respirable OSHA (PEL): 10 mg/m3 respirable Personal Protective Equipment Respiratory protection: Protect against inhalation. A respiratory protection program that meets applicable OHSA requirements should be maintained in the workplace. Eye protection: Protect against contact with eyes by wearing suitable safety eyeglasses or chemical protective goggles or other face protection. Skin protection: Protect against skin contact by wearing protective gloves. Protect against skin contact by wearing suitable clothing. Engineering Controls Provide adequate workplace ventilation. If dusts are generated through handling, local exhaust ventilation should be employed. 9. Physical and Chemical Properties Physical state and appearance: Solid. Odor: Odorless. Taste: Tasteless. Molecular Weight: 12.01 g/mole Color: Black ph (1% soln/water): Not applicable. Boiling Point: Not available. Melting Point: 3650 C (6602 F) Critical Temperature: 681 C (1257.8 F) Specific Gravity: Not available. Vapor Pressure: Not applicable. Vapor Density: Not available. Volatility: Not available. Odor Threshold: Not available. Water/Oil Dist. Coeff.: Not available. ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 4

Ionicity (in Water): Not available. Dispersion Properties: Not available. Solubility: Insoluble in cold water. 10. Stability and Reactivity Stability: The product is stable. Instability Temperature: Not available. Conditions of Instability: Excess heat, incompatible materials. Incompatibility with various substances: Highly reactive with oxidizing agents. Corrosivity: Non-corrosive in presence of glass. Special Remarks on Reactivity: Reacts vigorously with liquid potassium, and potassium peroxide. If graphene contacts liquid potassiuim, rubidium or caesium at 300 C, intercalation compounds may be formed. Special Remarks on Corrosivity: Not available. Polymerization: Will not occur. 11. Toxicological Information Routes of Entry: Inhalation. Ingestion. Toxicity to Animals: LD50 (oral, rat): >2000mg/kg (Graphite) LC50 (inhalation, rat): Not available. Chronic Effects on Humans: Causes damage to the following organs: upper respiratory tract. May cause damage to the following organs: cardiovascular system. Other Toxic Effects on Humans: Slightly hazardous in case of skin contact (irritant), of ingestion, of inhalation. Special Remarks on Toxicity to Animals: Not available. Special Remarks on Chronic Effects on Humans: Not available. Special Remarks on other Toxic Effects on Humans: Nuisance dust. Acute Potential Health Effects: Skin: Causes skin irritation. Eyes: Dust causes eye irritation. Inhalation: May be harmful if inhaled. Dust causes respiratory tract and mucous membrane irritation. Ingestion: May be harmful if swallowed. May cause gastrointestinal (digestive) tract irritation with nausea and vomiting. Chronic Potential Health Effects: Inhalation of high concentrations of graphene dust over prolonged periods of time may cause pneumoconiosis. Symptoms can include cough, shortness of breath, and decrease of pulmonary function. Preexisting pulmonary disorders such as emphysema may possibly be aggravated by prolonged exposure to high concentrations of graphene dust. This toxicology of this substance has not been fully investigated. ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 5

12. Ecological Information Ecotoxicity: Not available. BOD5 and COD: Not available. Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic. Special Remarks on the Products of Biodegradation: Not available. 13. Disposal Considerations Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulation 14. Transport Information DOT Classification: Not a DOT controlled material (United States). Identification: Not applicable. Special Provisions for Transport: Not applicable. Road transport: Not dangerous goods Sea transport: Not dangerous goods Air transport: Not dangerous goods 15. Regulatory Information Graphene (Graphite, CAS no. 7782-42-5) is not listed as a hazardous material under US Federal regulations. It is not listed under the Clean Air Act, the Clean Water Act, SARA (section 302, section 311/312, or section 313), HAPS, or IARC. Graphite (CAS no. 7782-42-5) is listed on: US: TCSA Canada: DSL EC: EINECS This product has WHMIS (Canada) classification D2A US: TCSA Canada: DSL EC: EINECS This product has WHMIS (Canada) classification D2A 16. Other Information ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 6

References: Not available. Other Special Considerations: Not available. Disclaimer: ACS Material, LLC believes that the information in this Material Safety Data Sheet is accurate and represents the best and most current information available to us. ACS Material makes no representations or warranties either express or implied, regarding the suitability of the material for any purpose or the accuracy of the information contained within this document. Accordingly, ACS Material will not be responsible for damages resulting from use of or reliance upon this information. ACS Material Graphene Nanoplates MSDS www.acsmaterial.com Page 7