SAP Nte 303613 - Missing dcumentatin n enhancement Nte Language: English Versin: 2 Validity: Valid Since 31.07.2000 Summary Symptm Missing dcumentatin n SAP enhancement Additinal key wrds CMOD, rder quantity ptimizing Cause and prerequisites Yu want t use the user exits f enhancement fr custmer-specific enhancement f quantity ptimizing (runding). Slutin EXIT_SAPLMDR1_001 (user exit fr remving invalid Un decimal places) In the standard prcess, the runded quantity is truncated t the number f decimal places set in Custmizing. Using this user exit, yu have tw ptins t influence this: 1. Remving invalid decimal places individually (runding up r dwn t the nearest whle number, fr example).returning the runded quantity via parameter CH_VALID_QANTITY with maximum I_VALID_DECI decimal places. 2. If yu als want t determine the number f valid decimal places individually, this number must be returned in parameter CH_NEW_VALID_DECI. If nly the number f valid decimal places is t be changed and returned, then the standard methd is nt used anymre. This means that yu can 'deactivate' the standard methd by changing the number f decimal places even if n wn methd has been implemented. Descriptin f the parameters: I_QUANTITY: Imprt f the quantity befre remving the decimal places. I_UNIT: Imprt f the unit f measure (Un) f the quantity. I_VALID_DECI:Number f valid decimal places fr runding determined frm Custmizing fr the unit f measure (T006-ANDEC). CH_NEW_VALID_DECI: Changeable quantity, entered like I_QUANTITY. CH_VALID_QUANTITY:Changeable number f decimal places, entered like I_VALID_DECI. Als refer t Nte 212981 in cnnectin with this user exit! EXIT_SAPLMDR1_002 (user exit fr defining allwed units f measure) In the standard prcess, the valid units f measure fr a material and 28.07.2010 Page 1 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement applicatin are determined via functin mdule MD_ALLOWED_QUANTITY_UNIT. These units f measure are used t determine the crrect return unit f measure f the runding. Via this user exit, after the standard determinatin f the valid units f measure yu can influence them as fllws: 1. Creating additinal valid units f measure. 2. Remving determined valid units f measure. Descriptin f the parameters: I_S_GENERAL:Imprt f cntrl data that is als used fr mdule MD_ALLOWED_QUANTITY_UNIT. The fields are: - APPVIEW: Applicatin area, pssible values: '01' = Purchasing '02' = Sales '03' = Allcatin table (especially Retail applicatin in purchasing) - FLAGDEFQTUNIT:Cntrls the determinatin f the default unit f measure. - FLAGVENQTUNIT:Cntrls the evaluatin f the units f measure grup f the vendr. - FLAGBUYQTUNIT:Cntrls the evaluatin f the units f measure grup f the recipient. - FLAGALLQTUNIT:Cntrls the determinatin f the allwed lgistics unit f measure. - LIFNR: Vendr number (entry in purchasing nly). - INTVEND: Shws whether LIFNR is an internal vendr. - WERKS_KRED:Plant as internal vendr if n vendr master exists fr the plant. - EKORG: Purchasing rganizatin (entry in purchasing nly). - WERKS: Plant as recipient (entry in purchasing nly). - KUNNR: Custmer as recipient (entry in sales nly). - INTCUST: Shws whether KUNNR is an internal custmer. - VTWEG: Distributin channel f the vendr (entry in sales nly). - VKORG: Sales rganizatin f the vendr (entry in sales nly). - SPART: Divisin f the vendr (entry in sales nly). 28.07.2010 Page 2 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement - INFLS:Cntrls the cnsideratin f the sales inf recrd (entry in sales nly). - MATNR: Material number. - INFNR: Purchasing inf recrd number (entry in purchasing nly). - PSTYP:Item categry f the purchasing dcument (entry in purchasing nly). I_S_MARA: Imprt f already determined master data, table MARA. I_S_EINA: Imprt f already determined master data, table EINA. I_S_EINE: Imprt f already determined master data, table EINE. I_S_MARC: Imprt f already determined master data, table MARC. I_S_MARC_2:Imprt f already determined master data, table MARC fr supplying plant (nly if plant is the vendr). I_S_MVKE: Imprt f already determined master data, table MVKE. I_S_KNMT: Imprt f already determined master data, table KNMT. I_S_KNVV: Imprt f already determined master data, table KNVV. It depends n the applicatin which f the master data tables have already been imprted. O_T_QT_UNIT: Changeable table f the valid units f measure determined.if yu insert new units f measure, then make an entry in the fllwing fields: - MATNR: Material number. - MEINH: Unit f measure. - FLAGSIQTUNIT: Indicatr fr SI-ME. - ADDKO: Additive cnstant frm T006. - DIMID: Dimensin f unit f measure frm T006. - UMREZ: Cnversin numeratr fr cnversin t base unit f measure. - UMREN: Cnversin denminatr fr cnversin t base unit f measure. - MSSIE:Base unit f measure frm T006D with dimensin-dependent unit f measure. - ZAHL:Cnversin numeratr fr cnversin f dimensin-dependent unit f measure t base unit f measure f the dimensin. 28.07.2010 Page 3 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement - NENNR:Cnversin denminatr fr cnversin f dimensin-dependent unit f measure t the base unit f measure f the dimensin. - FLAGDEFQTUNIT: Indicates the default unit f measure. - FLAGVENQTUNIT:Indicates allwed units f measure accrding t units f measure grup f the vendr. - FLAGBUYQTUNIT:Indicates allwed unit f measure accrding t unit f measure grup f the recipient. - FLAGALLQTUNIT:Indicates allwed lgistics unit f measure (nly set fr default unit f measure and allwed unit f measure accrding t units f measure grup f the vendr and f the recipient). - MSEHL: must nt be filled! The table f the allwed units f measure must at least cntain ne entry and exactly ne entry in which the unit f measure is indicated as default unit f measure. Please nte that Nte 186918 must be implemented in the system befre yu activate the enhancement (Releases 4.6A and 4.6B), since the nte enhances a structure that is used in the user exit! EXIT_SAPLMDR1_003 (user exit fr implementing custmer-specific methd f runding) In the standard prcess, runding by dynamic runding prfile is carried ut accrding t the runding methds defined in Custmizing. Using this user exit, yu can influence the result f the runding as fllws: 1. Yu can implement a custmer-specific runding methd fr dynamic runding prfiles with custmer-specific runding methds.the three custmer-specific methds 'X', 'Y' and 'Z' are available fr this. The system nly accesses the user exit if ne f these runding methds (that is,a runding methd ther than ne f the standard runding methds '0', '1', '2', '3' and '4') is defined in the runding prfile. Since a runding methd generally uses the runding rules maintained in Custmizing fr the runding prfile as a reference, the system pssibly needs t read the runding prfile in the user exit.functin mdule MD_RDPR_READ shuld be used fr this. After the call f the user exit, the fllwing functins are perfrmed n the runded quantities: a) Check f the lwer and upper limits; crrespnding adjustment f the runding quantity, if necessary, if the check shuld be carried ut (I_S_GENERAL-NO_MIN_MAX_CHECK <> 'X').This check is nly mitted fr special use in the sales rder (I_S_GENERAL OPCODE = '5'). b) User exit EXIT_SAPLMDR1_004 (see belw). c) Check whether the runding unit is an allwed unit f measure (unit 28.07.2010 Page 4 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement f measure must be entered in table CH_T_QT_UNITS with indicatr FLAGALLQTUNIT = 'X').If the unit f measure is a nt allwed lgistics unit f measure, then the runding quantity LMENGE is cnverted t the default unit f measure (entry in table CH_T_QT_UNITS with FLAGDEFQTUNIT = 'X') and the default unit f measure is filled in the runding unit (LOGME).Furthermre, the runded quantity in the entry unit f measure is adjusted crrespndingly t the new runding quantity. d) Remving invalid decimal places (T006-ANDEC). e) In the autmatic lad building applicatin the runding quantity (LMENGE) is cnverted t the entry unit f measure (LBQTUNIT). Descriptin f the parameters: I_S_GENERAL:Imprt f cntrl data that is als used fr mdule MD_SINGLE_ROUNDING.The fields are: - OPCODE:Applicatin area frm which quantity ptimizatin was called, pssible values: '1' = Quantity ptimizatin fr nrmal purchase rders - '2' = Quantity ptimizatin fr sales rders '3' = Quantity ptimizatin fr deliveries '4' = Quantity ptimizatin fr stck transprt rders '5' = Quantity ptimizatin fr a special case in the sales rder '6' = Quantity ptimizatin during simulatin in runding prfiles maintenance '7' = Quantity ptimizatin fr additinals 'L' = Quantity ptimizatin fr nrmal purchase rders in autmatic rder ptimizing - MATNR: Material number. - QUANTITY: Quantity nt runded (riginal quantity). - MEINH: Unit f measure f the quantity nt runded. - UMREZ:Cnversin numeratr fr cnverting unit f measure MEINH t base unit f measure (ptinal). - UMREN:Cnversin denminatr fr cnverting unit f measure MEINH t base unit f measure (ptinal). - NO_MIN_MAX_CHECK:Indicatr that maximum and minimum (rder)quantity shuld nt be taken int accunt fr runding. - KONNR:Cntract number t an rder dcument, can be filled fr all purchasing applicatins (OPCODE = '1', '4', '7', 'L'). 28.07.2010 Page 5 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement - KMEINH: Cntract unit t the cntract, is entered if KONNR is filled. - KUMREZ:Cnversin numeratr fr cnverting unit f measure KMEINH t base unit f measure (ptinal). - KUMREN:Cnversin denminatr fr cnverting unit f measure KMEINH t base unit f measure (ptinal). - LIFNR:Vendr number, nly entered fr purchasing applicatins (OPCODE = '1', '4', '7', 'L'). - WERKS_KRED:Plant as internal vendr, entry in purchasing applicatins (OPCODE = '1', '4', '7', 'LITERS') alternatively t LIFNR nly if n vendr master is available fr an internal vendr (supplying plant). - EKORG:Purchasing rganizatin, entry in purchasing applicatins nly (OPCODE = '1', '4', '7', 'L'). - INFNR:Number f the purchasing inf recrd, may nly have an entry in purchasing applicatins (OPCODE = '1', '4', '7', 'L') (ptinal). - PSTYP:Order item categry, entry in purchasing applicatins nly (OPCODE = '1', '4', '7', 'L'). - WERKS:Plant as recipient, entry in purchasing applicatins nly (OPCODE = '1', '4', '7', 'L'). - VKORG:Sales rganizatin f the vendr, entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - VTWEG:Distributin channel f the vendr, entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - SPART:Divisin f the vendr, entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - KUNNR:Custmer number f the recipient, entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - INFLS:Indicatr defining that the system shuld use the sales inf recrd in sales applicatins (OPCODE = '2', '3', '5', '7'). Other runding parameters that can be transferred ptinally by the particular applicatin in I_S_GENERAL (if at least ne field f these runding parameters is filled thrugh the calling prgram, then runding mdule MD_SINGLE_ROUNDING des nt determine any ther runding parameters frm the database): - DEFQTUNIT:Default unit f measure which always displays an allwed lgistics unit f measure. - DEFUMREZ:Cnversin numeratr fr cnverting unit f measure DEFQTUNIT t base unit f measure, needs n entry if default 28.07.2010 Page 6 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement unit f measure is filled (ptinal). - DEFUMREN:Cnversin denminatr fr cnverting unit f measure DEFQTUNIT t base unit f measure, needs n entry if default unit f measure is filled (ptinal). - VENUNITGR:Unit f measure grup fr determinatin f the allwed unit f measure f the vendr. - BUYUNITGR:Unit f measure grup fr determinatin f the allwed unit f measure f the recipient. - RDPRF: Runding prfile. - RDPR: First entry fr runding prfile RDPRF in table RDPR. - MAXQT: Upper limit fr the runded quantity.if indicatr I_S_GENERAL-NO_MIN_MAX_CHECK is nt set (<> 'X'), the result f the runding is set t this upper limit if the limit is exceeded. - MINQT: Lwer limit fr the runded quantity.if indicatr I_S_GENERAL-NO_MIN_MAX_CHECK is nt set (<> 'X'), the result f the runding is set t this lwer limit if the value is belw the limit. - MAMIQTUNIT: Unit f measure t which MAXQT and MINQT refer. - MAMIUMREZ:Cnversin numeratr fr cnverting unit f measure MAMIQTUNIT t base unit f measure (ptinal). - MAMIUMREN:Cnversin denminatr fr cnverting unit f measure MAMIQTUNIT t base unit f measure (ptinal). - INTVEND:Indicatr stating that it is an internal vendr, entry in purchasing applicatins nly (OPCODE = '1', '4', '7', 'L'). - VABME:Indicatr stating that variable rder unit is allwed, entry in purchasing applicatins nly (OPCODE = '1', '4', '7', 'L'). - BSTRF:Runding value frm MARC, entry in purchasing applicatins nly (OPCODE = '1', '4', '7', 'L'). - VAVME:Indicatr stating that variable sales unit is allwed, entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - SCMGN:Increment (delivery quantity), entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - SCHME:Unit f measure f increment (delivery unit), entry in sales applicatins nly (OPCODE = '2', '3', '5', '7'). - SCHMEUMREZ:Cnversin numeratr fr cnverting unit f measure SCHME t base unit f measure (ptinal). - SCHMEUMREN:Cnversin denminatr fr cnverting unit f measure SCHME t base unit f measure (ptinal). 28.07.2010 Page 7 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement CH_S_RESULT:Changeable structure that is transferred with the fllwing data: - INQTMEINS:Quantity nt runded (= I_S_GENERAL-MENGE), in base unit f measure. - MEINS: Base unit f measure frm table MARA. - QUANTITY: Runded quantity, in entry unit f measure. - LMENGE: Runded quantity, in runding unit f measure. - LOGME: Runding unit f measure. - LBQT:Entry quantity nt runded, when using autmatic lad building (OPCODE = 'L'). - LBQTUNIT:Unit f measure t entry quantity nt runded when using autmatic lad building (OPCODE = 'L'). - LBUMREZ:Cnversin numeratr fr cnverting unit f measure LBQTUNIT t base unit f measure (ptinal). - LBUMREN:Cnversin denminatr fr cnverting unit f measure LBQTUNIT t base unit f measure (ptinal). - ROUNDQT: Internal runded value. - RQTUNIT: Unit f measure fr ROUNDQT. This structure additinally cntains all runding parameters that were described fr structure I_S_GENERAL. In the user exit, nly change fields MENGE, LMENGE and LOGME f structure CH_S_RESULTS. CH_T_QT_UNITS:Changeable table f the valid units f measure (see descriptin f parameter O_T_QT_UNITS fr EXIT_SAPLMDR1_002). CH_T_ROUND_REASONS: Changeable table cntaining the runding reasns: - KZGRUND: Runding reasn, pssible values: '1' = Runding because f a runding value in purchasing '2' = Runding because f a delivery unit (threshld value) in sales '3' = Runding because f a static runding prfile '4' = Runding because f a dynamic runding prfile with runding t default unit f measure (rder r sales unit). '5' = Runding because f a dynamic runding prfile with runding t a lgistics unit f measure 28.07.2010 Page 8 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement '6' = Runding because f an upper limit (maximum quantity exceeded) '7' = Runding because f a lwer limit (value belw minimum quantity) '8' = Runding because f unallwed decimal places (T006-ANDEC) '9' = Runding because f unallwed variable rder unit 'A' = Runding because f a runding prfile with markup and markdwn 'S' = Runding fr a special case in the sales rder 'K' = Runding because f a cntract (cnverting t the cntract unit f measure) If the runded quantity r the runding unit f measure has changed cmpared with the quantity nt runded r the related unit f measure, table CH_T_ROUND_REASONS shuld at least return ne runding reasn (KZGRUND). The values listed abve are available fr this. If yu use custmer-specific runding methds, refer t Nte 315873 which is a prerequisite fr the usage f the user exit! Please nte that Nte 186918 must be implemented i the system befre yu activate the enhancement (Release 4.6A and 4.6B), since it enhances a structure used in the user exit! EXIT_SAPLMDR1_004 (user exit fr custmer-specific crrectin f runding result) In the standard prcess, runding f the quantity and adjusting the unit f measure if necessary is carried ut in accrdance with parameters and master data transferred via the interface t mdule MD_SINGLE_ROUNDING and determined in the mdule. Using this user exit, yu can influence the results f the runding as fllws: 1. Changing the runded quantity in unit f measure f the quantity nt runded. 2. Changing the runded quantity in unit f measure f the runded quantity (can be identical). 3. Changing the unit f measure f the runded quantity. 4. Creating runding reasns fr the return t the calling applicatin (yu shuld d this if yu change the runded quantity r unit f measure). After the call f the user exit, the fllwing functins are carried ut n the pssibly adjusted quantities and unit f measure: a) Check whether the runding unit f measure is an allwed (lgistics) unit f measure, that is, table CH_T_QT_UNITS must cntain an entry fr the unit f measure with indicatr 28.07.2010 Page 9 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement FLAGALLQTUNIT = 'X'.If this is nt the case, the runded quantity is cnverted t the default unit f measure (entry in table CH_T_QT_UNITS with indicatr FLAGDEFQTUNIT = 'X') and the default unit f measure is entered fr the runding unit f measure.the runded quantity in entry unit f measure is als adjusted t the runding quantity calculated this way. b) Remving the invalid decimal places, see user exit EXIT_SAPLMDR1_001. c) If autmatic lad building is the calling applicatin, fr return the runding quantity is cnverted t the entry unit f measure. Descriptin f the parameters: I_S_GENERAL:Imprt f the cntrl parameters fr the runding (see descriptin f EXIT_SAPLMDR1_003). I_S_EINA: Imprt f determined master data (see EXIT_SAPLMDR1_002). I_S_EINE: Imprt f determined master data (see EXIT_SAPLMDR1_002). I_S_MARC_2: Imprt f determined master data (see EXIT_SAPLMDR1_002). I_S_MARC: Imprt f determined master data (see EXIT_SAPLMDR1_002). I_S_MVKE: Imprt f determined master data (see EXIT_SAPLMDR1_002). I_S_KNMT: Imprt f determined master data (see EXIT_SAPLMDR1_002). I_S_KNVV: Imprt f determined master data (see EXIT_SAPLMDR1_002). CH_T_QT_UNIT:Changeable table with the allwed lgistics units f measure already determined (shuld nt be changed here, see EXIT_SAPLMDR1_002). CH_T_ROUND_REASONS:Changeable table f the runding reasns fr which runding has already been carried ut.if the quantity r the unit f measure changes, a new entry shuld be generated (descriptin f the field and f the pssible values, see EXIT_SAPLMDR1_003). CH_S_RESULTS:Changeable structure f the results f quantity ptimizatin. Only change the fllwing fields here: - QUANTITY: Runded quantity in entry unit f measure. - LMENGE: Runded quantity in runding unit f measure. - LOGME: Runding unit f measure. Please nte that Nte 186918 must be implemented in the system befre yu activate the enhancement (Releases 4.6A and 4.6B), since the nte enhances a structure used in the user exit! EXIT_SAPLMDR1_005 (user exit fr the custmer-specific crrectin f runding parameters) 28.07.2010 Page 10 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement In the standard prcess,the parameters fr cntrl f the quantity ptimizatin are transferred by the applicatin t functin mdule MD_SINGLE_ROUNDING r determined frm the master data depending n the applicatin. Using this user exit, yu can influence the parameters that are used t carry ut the runding as fllws: 1. Changing the parameters fr the runding. Descriptin f the parameters: I_S_GENERAL:Imprt f the cntrl parameters fr the runding (see the descriptin fr EXIT_SAPLMDR1_003). I_S_MARA: Imprt f the material master data, table MARA. CH_T_QT_UNIT:Changeable table with the allwed lgistic units f measure already determined (shuld nt be changed here). CH_S_EINA:Changeable structure f master data determined already, table EINA. CH_S_EINE:Changeable structure f master data determined already, table EINE. CH_S_MARC_2:Changeable structure f master data determined already, table MARC fr the supplying plant (nly if plant is the vendr). CH_S_MARC:Changeable structure f master data determined already, table MARC. CH_S_MVKE:Changeable structure f master data determined already, table MVKE. CH_S_KNMT:Changeable structure f master data determined already, table KNMT. CH_S_KNVV:Changeable structure f master data determined already, table KNVV. It depends n the applicatin which f the master data tables have already been imprted. CH_S_RESULT:Changeable structure f the utput parameters f functin mdule MD_SINGLE_ROUNDING. Header Data Release Status: Released fr Custmer Released n: 30.07.2000 22:00:00 Master Language: German Pririty: Recmmendatins/additinal inf Categry: Dcumentatin errr Primary Cmpnent: LO-MD-QO Quantity Optimizing 28.07.2010 Page 11 f 12
SAP Nte 303613 - Missing dcumentatin n enhancement Valid Releases Sftware Cmpnent Release Frm Release SAP_APPL 46 46A 46B SAP_APPL 46C 46C 46C SAP_BASIS 46 46D 46D T Release and Subsequent Related Ntes Number Shrt Text 401437 Quantity ptimizatin: PReq and cntract in user exits 315873 Usage f custmer-specific runding ff methds 212981 EXIT_SAPLMDR1_001 sets quantity t 0 186918 Quantity runding: Cnsgmnt inf recrd nt fund 28.07.2010 Page 12 f 12