Page 1 of 7 The following sample(s) was/were submitted and identified by/on behalf of the applicant as Sample Submitted By Sample Description Style/Item No. Sample Receiving Date Testing Period FLUX SR-34SUPER 2015/01/29 2015/01/29 TO 2015/02/04 =========================================================================================== Test Requested (1) As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs contents in the submitted sample. Test Result(s) (2) Please refer to next pages for the other item(s). Please refer to next page(s). This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is
Page 2 of 7 Test Result(s) PART NAME No.1 YELLOW LUMP Test Item(s) Cadmium (Cd) Lead (Pb) Mercury (Hg) Hexavalent Chromium Cr(VI) Phosphorus (P) Antimony (Sb) Beryllium (Be) Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Unit With reference to IEC 62321-5 2013 and performed by ICP-AES. With reference to IEC 62321-5 2013 and performed by ICP-AES. With reference to IEC 62321-4 2013 and performed by ICP-AES. With reference to IEC 62321 2008 - Annex C and performed by UV-VIS. Method With reference to US EPA Method 3052. Analysis was performed by ICP- AES. With reference to US EPA Method 3050B. Analysis was performed by ICP-AES. With reference to US EPA Method 3050B. Analysis was performed by ICP-AES. With reference to IEC 62321 2008 - Annex A and performed by GC/MS. Result MDL No.1 - n.d. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is
Page 3 of 7 Test Item(s) Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether Unit Method MDL Result No.1 - n.d. With reference to IEC 62321 2008 - Annex A and performed by GC/MS. Note 1. = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. " - " = Not Regulated This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is
Page 4 of 7 #FLOW 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr 6+ test method excluded) 2) Name of the person who made measurement Climbgreat Yang 3) Name of the person in charge of measurement Troy Chang Cutting / Preparation Sample Measurement Pb Cd Acid digestion by suitable acid depended on different sample material (as below table) Hg Microwave digestion with HNO 3 /HCl/HF Cr 6+ (Note**) Add appropriate amount of digestion reagent Filtration Solution ICP-AES Sample Material Residue 1) Alkali Fusion 2) HCl to dissolve Digestion Acid Heat to appropriate temperature to extract Cool, filter digestate through filter Add diphenyl-carbazide for color development Steel, copper, aluminum, solder Aqua regia, HNO 3, HCl, HF, H 2 O 2 Glass Gold, platinum, palladium, ceramic HNO 3 /HF Aqua regia Silver HNO 3 Plastic Others H 2 SO 4, H 2 O 2, HNO 3, HCl Added appropriate reagent to total digestion measure the absorbance at 540 nm by UV-VIS Note** (For IEC 62321) (1) For non-metallic material, add alkaline digestion reagent and heat to 90~95. (2) For metallic material, add pure water and heat to boiling. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is
Page 5 of 7 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. 2) Name of the person who made measurement Climbgreat Yang 3) Name of the person in charge of measurement Troy Chang Flow Chart of digestion for the elements analysis performed by ICP-AES Cutting / Preparation Sample Measurement Acid digestion by suitable acid depended on different sample material (as below table) Filtration Solution Residue 1) Alkali Fusion 2) HCl to dissolve ICP-AES Steel, copper, aluminum, solder Aqua regia, HNO 3, HCl, HF, H 2 O 2 Glass Gold, platinum, palladium, ceramic HNO 3 /HF Aqua regia Silver HNO 3 Plastic Others H 2 SO 4, H 2 O 2, HNO 3, HCl Added appropriate reagent to total digestion This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is
Page 6 of 7 PBB/PBDE analytical FLOW CHART Name of the person who made measurement Roman Wong Name of the person in charge of measurement Troy Chang First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is
Page 7 of 7 #PIC * The tested sample / part is marked by an arrow if it's shown on the photo. * ** End of Report ** This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http//www.sgs.com/en/terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http//www.sgs.com/en/terms-and-conditions/termse-document.aspx. Attention is