Automatic horizontal sliding car door EN 81-0 compliance Residencial Commercial Service lifts DOC-FECMCBPP0C00EN ONGOING VERSION: 16-0-014 ENG www.fermator.com
Door configuration LIFT APPLICATION Door cycles per year: Up to 1.00.000. Traffic peak of the door: Up to cycles per hour. Traffic lift speed: Up to 6 m/s. APPLICATION RANGE Opening Clear opening - (mm) Clear height - (mm) C 60 -.400 C4 700 -.000 C6 1.0 -.000 T1 0-1.00 1.800 -.00 T 700-1.0 T 700 -.000 Opening Metal sheet (1) Steel panels Double skin Vision PANELS Wien type vision Bevel big vision Flush big vision Glass panels Full glass Full glass Aluminium hidden trims glass C - C4 - C6 T1 - T - T W (1) Solid execution option. SILLS Type of sill Aluminium sill Reinforced aluminium sill Steel sill Massive sill Profile detail Availability eated sill option Dust holes Sill support Opening C - C4 - C6 T1 - T - T EN 81-1 Existing buildings EN 81-41 Impaired mobility STANDARDS EN 81-71 Vandal resistance lifts Cat. I Cat. II EN 81-7 Firefighters lifts Opening C - C4 - C6 T1 - T - T IP1 Protection against a solid foreign body of 1, mm or more in diameter and protected against vertically falling drops of water. IPX Protected against sprays of water up to degrees from the vertical. PROTECTION IP4 Protection against dust and protected against water splashed from all directions. Magnetic contact Mechanical contact IP6 Sealed against dust and protected against jets of water from all directions. EEx Explosion proof, Group II (surface industries) and Category (explosive atmosphere between 10 and 1.000 hrs/yr). Available Not available Ask to commercial department www.fermator.com
Door configuration Opening C - C4 -C6 T1 - T - T Photocell SAFETY DEVICES Photoelectric Emergency power supply Battery barrier VF VF6 VF VF6 PANEL REGULATION SUPPORT AND PANEL GUIDE Type of panel regulation support Plus Type of panel guide Plus MPATIBILITY 110 110 AFO: + 0 90 AFO: + 0 90 ±0 90 0 90 10 4 MOTOR MOTOR ±0 90 0 90 10 4 Case 40/10 landing door Coupling Symmetric skate Unlocking zone +114 / -169 T opening shown. All dimensions in mm. Toe guard Type Big section section * 70 79 780 (480) (8) Thickness 1, Range All 60-1.00 *Contracted toe guard dimension between brackets. All dimensions in mm. Case Premium landing door Coupling Asymmetric skate Unlocking zone +10 / -148 T opening shown. All dimensions in mm. Toe guard Type Big section section * 70 79 780 (480) (8) Thickness 1, Range All 60-1.00 *Contracted toe guard dimension between brackets. All dimensions in mm. CAMS Compatibility Semiautomatic hinged landing door: Aluminium, Global, Fermator, B+ Type of cam Inverted retractable Flexible fixed Fixed Drawing Available Not available Ask to commercial department www.fermator.com
Technical features T operator DRIVE Type Synchronous brushless permanent magnets motor. Efficiency 80%. Consumptions Standby 4 W / Average per cycle 0 W. Transmission Gearless*. 700-1.400 mm. Eagle belt. Geared. > 1.400 mm. RPP belt. *Geared antibanging system available. Type Adjustable parameters via Working signals available Opening speed Closing speed Re-opening ELECTRONIC MODULE VF and VF6. PC / Console / Smartphone. From 1 V to 40 V AC/DC or with BUS CAN. Up to 1 m/s (Regulable). Up to 0,6 m/s. Auto-adjustable directly with the panel weight. Integrated with auto-adjustable cycles. Noise level Total weight Maximum moving mass Locking device GENERAL FEATURES < 48 db. Reference: T 800 mm.000 mm, with metal sheet panels - 68 kg. kg. Available car door lock type. INSTALLATION Pre-adjusted and tested to simplify the installation. Frontal concept, all parts within the sill projection, allows fixing directly to the front or by regulable range of brackets. www.fermator.com 4
Technical drawing panel centre parting door 4 mm sill + 0 (1) = = 1 18, FIXING BRACKET RANGE 48 7 10 + 0 - +4 + 0 +40-70 + 0 +19-11 0 STATIC MEANICAL DETAILS EG BRACKET + 10 + 70 + 0 4 = = 49 1 1 47 100 4 0 Concentric Ø 66 / + 0 0 Eccentric Ø 6 + 40 SILL DETAIL / / CAR FLOOR 0 10 10 Notes: 1 For 60 this dimension is 1.46. Recomended fixing point in vertical for each bracket. In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front. - All dimensions in mm. www.fermator.com
1, + 0 = = 1 Technical drawing 4 panel centre parting door 90 mm sill FIXING BRACKET RANGE 48 10 /4 + 0 7 0 + 10 + 70 + 0 +4 - + 0 0 STATIC EF BRACKET +40-70 + 0 Concentric Ø 66 Eccentric Ø 6 MEANICAL DETAILS +19-11 + 0 EG BRACKET 1, + 40 SILL DETAIL 1 40 40 = / / = 1 1 0 0 /4 /4 0 0 90 90 7 100 0 CAR FLOOR 0 10 10 Notes: Recomended fixing point in vertical for each bracket. In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front. - All dimensions in mm. www.fermator.com 6
Technical drawing 6 panel centre parting door 1 mm sill 1, + 0 = = 1 7 10 0 /6 + 0 1, + 40 = / / = 1 1 0 /6 /6 /6 0 1 1 7 100 0 + 10 0 +4 - + 0 + 70 + 0 10 STATIC EF BRACKET FIXING BRACKET RANGE 48 +40-70 + 0 EG BRACKET +19-11 + 0 10 MEANICAL DETAILS Concentric Ø 66 Eccentric Ø 6 CAR FLOOR SILL DETAIL 1 4040 40 0 Notes: Recomended fixing point in vertical for each bracket. In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front. - All dimensions in mm. 7 www.fermator.com
Technical drawing 1 panel side opening door + 0 4 mm sill 18, FIXING BRACKET RANGE 48 1 10 8 4 40 10 +4 - + 0 +40-70 + 0 - +40 70 +19-11 + 0 0 STATIC EF BRACKET EG BRACKET MEANICAL DETAILS + 10 + 0 + 0 0 Concentric Ø 66 + 0 0 1 4 49 0 100 0 4 100 7 4 0 17 + 40 Eccentric Ø 6 SILL DETAIL CAR FLOOR 10 1 10 Notes: Recomended fixing point in vertical for each bracket. In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front. - All dimensions in mm. www.fermator.com 8
Technical drawing panel side opening door 1, + 0 8 4 90 mm sill 10 FIXING BRACKET RANGE 48 1 10 40 +4 - + 0 +40-70 + 0 +19-11 + 0 0 STATIC EF BRACKET EG BRACKET MEANICAL DETAILS + 10 + 0 + 0 0 0 同心 Ø 66 / + 0 1, + 40 偏心 Ø 6 SILL DETAIL 100 1 0 90 40 40 90 90 7 100 0 轿厢地面 0 高度 10 1 10 Notes: Recomended fixing point in vertical for each bracket. In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front. - All dimensions in mm. 9 www.fermator.com
Technical drawing panel side opening door 1 mm sill 1, + 0 4 FIXING BRACKET RANGE 48 10 8 40 10 +4 - +40-70 +19-11 1 + 0 + 0 + 0 0 STATIC EF BRACKET EG BRACKET MEANICAL DETAILS + 10 + 0 + 0 0 Concentric Ø 66 / + 0 0 Eccentric Ø 6 1, + 40 SILL DETAIL 1 10 1 0 1 6 100 0 10 1 1 7 100 0 CAR FLOOR 40 40 40 0 Notes: Recomended fixing point in vertical for each bracket. In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front. - All dimensions in mm. www.fermator.com 10
Sales contacts Spain: commercial@es.fermator.com Italy: commercial@it.fermator.com France: commercial@fr.fermator.com Brazil: commercial@br.fermator.com China: commercial@cn.fermator.com India: commercial@in.fermator.com Poland: commercial@pl.fermator.com Fermator reserves the right to make changes to the specification of the products within this catalogue without prior notice.