Hyperfast Rectifier, 8 A FRED Pt L TO-0 FullPAK Cathode Anode PRIMARY CHARACTERISTICS I F(AV) 8 A V R 600 V V F at I F.3 V t rr typ. 8 ns T J max. 75 C Package L TO-0 FullPAK Circuit configuration Single FEATURES Hyperfast recovery time Low forward voltage drop 75 C operating junction temperature Low leakage current Fully isolated package (V INS = 500 V RMS ) UL pending Designed and qualified according to JEDEC -JESD 47 Material categorization: for definitions of compliance please see /doc?999 DESCRIPTION / APPLICATIONS State of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC boost stage in the AC/DC section of SMPS, inverters or as freewheeling diodes. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Repetitive peak reverse voltage V RRM 600 V Average rectified forward current I F(AV) T C = 08 C 8 Non-repetitive peak surge current I FSM 00 A Repetitive peak forward current I FM 6 Operating junction and storage temperatures T J, T Stg -65 to +75 C ELECTRICAL SPECIFICATIONS (T J = 5 C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS Breakdown voltage, blocking voltage V BR, V R I R = 00 μa 600 - - I F = 8 A -.0.4 Forward voltage V F I F = 8 A, T J = 50 C -.3.8 V R = V R rated - 0.3 50 Reverse leakage current I R T J = 50 C, V R = V R rated - 55 500 μa Junction capacitance C T V R = 600 V - 7 - pf Series inductance L S Measured lead to lead 5 mm from package body - 8.0 - nh V Revision: 6-Oct-7 Document Number: 9649 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9000
DYNAMIC RECOVERY CHARACTERISTICS (T C = 5 C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS I F = A, di F /dt = 00 A/μs, V R = 30 V - 8 Reverse recovery time t rr I F = 8 A, di F /dt = 00 A/μs, V R = 30 V - 0 5 T J = 5 C - 5 - ns T J = 5 C - 40 - Peak recovery current I RRM I F = 8 A T J = 5 C -.4 - di F /dt = 00 A/μs T J = 5 C - 4.8 - V R = 390 V A T J = 5 C - 5 - Reverse recovery charge Q rr T J = 5 C - 0 - nc Reverse recovery time t rr I F = 8 A - 33 - ns Peak recovery current I RRM T J = 5 C di F /dt = 600 A/μs - - A Reverse recovery charge Q rr V R = 390 V - 0 - nc THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS Maximum junction and storage temperature range T J, T Stg -65-75 C Thermal resistance, junction-to-case R thjc - 3.4 4.3 C/W Thermal resistance, junction-to-ambient per leg R thja Typical socket mount - - 70 Thermal resistance, case-to-heatsink Weight Mounting torque R thcs Mounting surface, flat, smooth, and greased - 0.5 - -.0 - g - 0.07 - oz. Marking device Case style L TO-0 FullPAK 8ETH06FP 6.0 (5.0) - (0) kgf cm (lbf in) I F - Instantaneous Forward Current (A) 00 0 0. 0 T J = 75 C T J = 50 C T J = 5 C 3 4 V F - Forward Voltage Drop (V) Fig. - Typical Forward Voltage Drop Characteristics I R - Reverse Current (µa) 000 T 00 J = 75 C T J = 50 C 0 T J = 5 C T J = 00 C 0. T J = 5 C 0.0 0.00 0 00 00 300 400 500 600 V R - Reverse Voltage (V) Fig. - Typical Values of Reverse Current vs. Reverse Voltage Revision: 6-Oct-7 Document Number: 9649 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9000
000 C T - Junction Capacitance (pf) 00 T J = 5 C 0 0 00 00 300 400 500 600 V R - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Z thjc - Thermal Impedance ( C/W) 0 D = 0.50 t 0. D = 0.0 t D = 0.0 Single pulse D = 0.05 Notes: (thermal resistance) D = 0.0. Duty factor D = t /t. D = 0.0. Peak T J = P DM x Z thjc + T C. 0.0 0.0000 0.000 0.00 0.0 0. 0 00 t - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance Z thjc Characteristics P DM Allowable Case Temperature ( C) 80 60 40 D = 0.0 0 DC D = 0.0 0 8 D = 0.05 00 Square wave (D = 0.50) 6 D = 0.0 Rated V R applied D = 0.0 4 DC D = 0.50 See note () 80 0 0 4 6 8 0 4 0 4 6 8 0 I F(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Note () Formula used: T C = T J - (Pd + Pd REV ) x R thjc ; Pd = forward power loss = I F(AV) x V FM at (I F(AV) /D) (see fig. 5); Pd REV = inverse power loss = V R x I R ( - D); I R at V R = rated V R Fig. 6 - Forward Power Loss Characteristics Revision: 6-Oct-7 3 Document Number: 9649 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9000 Average Power Loss (W) 0 8 6 4 RMS limit I F(AV) - Average Forward Current (A)
60 50 V R = 390 V T J = 5 C T J = 5 C 400 350 300 V R = 390 V T J = 5 C T J = 5 C t rr (ns) 40 30 Q rr (nc) 50 00 50 I F = 6 A I F = 8 A 0 I F = 6 A I F = 8 A 0 00 000 di F /dt (A/µs) Fig. 7 - Typical Reverse Recovery Time vs. di F /dt 00 50 0 00 000 di F /dt (A/µs) Fig. 8 - Typical Stored Charge vs. di F /dt (3) t rr 0 I F t a tb () I RRM (4) Q rr 0.5 I RRM di (rec)m /dt (5) 0.75 I RRM () di F /dt () di F /dt - rate of change of current through zero crossing () I RRM - peak reverse recovery current (3) t rr - reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 I RRM and 0.50 I RRM extrapolated to zero current. (4) Q rr - area under curve defined by t rr and I RRM t rr x I Q RRM rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr Fig. 9 - Reverse Recovery Waveform and Definitions Revision: 6-Oct-7 4 Document Number: 9649 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9000
ORDERING INFORMATION TABLE Device code VS- 8 E T H 06 FP -N3 - product - Current rating (8 = 8 A) 3 - E = single 4 - T = TO-0, D PAK (TO-63AB) 5 - H = hyperfast recovery 6 - Voltage rating (06 = 600 V) 7 - FP = L TO-0 FullPAK 8 3 4 5 6 7 8 - Environmental digit: -N3 = halogen-free, RoHS-compliant, and totally lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 50 000 Antistatic plastic tube Dimensions Part marking information LINKS TO RELATED DOCUMENTS /doc?9657 /doc?9539 Revision: 6-Oct-7 5 Document Number: 9649 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9000
Outline Dimensions L TO-0 FullPAK DIMENSIONS in millimeters 0.6 0.0 Hole Ø 3.40 3.0 3.7 3. 7.3 6.50 6.0 5.8.80.44 Mold flash bleeding Exposed Cu 3.3 3. 3.56.90.54 TYP. 0.9 0.7.54 TYP. 0.6 0.38.85.65.0.47.30.05 R 0.7 ( places) R 0.5 4.8 4.6 Bottom view 5 ± 0.5 5 ± 0.5 Revision: 06-Jul-7 Document Number: 9657 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 07 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000