6 FMP
SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7
Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat treatment) ypass valve: rass Reverse Flow: Steel (series 5-0 only) Check valve: Steel Pressure Maximum operating pressure: 80 bar (8 MPa) Test pressure: 40 bar (4 MPa) urst pressure: 840 bar (84 MPa) Pulsed pressure fatigue test,000,000 cycles with pressure from 0 to 80 bar (8 MPa) Filter Element rea Filter element in stainless steel mesh Length Type 4 P065 P5 P0 74 50 064-950 00 700-650 645 5970 880 Values expressed in cm Pressure drops Δp ousing The curves are plotted using mineral oil with density of 0.86 kg/dm to ISO 968. Δp varies proportional with density. Temperature From -5 C to +0 C Filter ousing FMP 065 ypass valve Opening pressure 6 bar ±0% Other opening pressures on request. Elements type Δp Mircrofibre elements series N-R: 0 bar Elements in stainless steel mesh series N: 0 bar Elements in microfibre series -S: 0 bar Oil flow from exterior to interior. Seals Standard Nitrile (NR) series Optional FPM series V Weights without filter elements (kg) Length 4 FMP 065.0.4 5. FMP 5 6.0 8..0 FMP 0.7 4.7 0.7.7 Filter internal volumes (dm ) Length 4 FMP 065 0.8 0.45 0.67 FMP 5 0.40.0.4 FMP 0.6.6.7 4.0 Connections In-line Inlet/Outlet Compatibility odies compatible with: Mineral oils to ISO 94 - aqueous emulsions Synthetic fluids, water/glycol. Filter elements compatible with: Mineral oils to ISO 94 - aqueous emulsions Synthetic fluids, water/glycol. Nitrile (NR) seals series, compatible with: Mineral oils to ISO 94 - aqueous emulsions Synthetic fluids, water/glycol. V series FPM seals, compatible with: Synthetic fluids type S-FDR-FDS-FDU. To ISO 94 Check valve /,50 /4,00 0,50 0,00 0 5 50 75 00 5 Filter ousing FMP 5 Check valve /4,50,00 0,50 0,00 0 50 00 50 00 50 Filter ousing FMP 0 Check valve /4,50,00 / 0,50 0,00 0 00 00 00 400 500 8
Valves ypass valve pressure drops 5 FMP 065 0 5 0 0 4 6 48 60 5 FMP 5 0 5 0 0 8 6 54 7 90 5 FMP 0 0 5 0 0 50 00 50 00 50 4,50 Pressure drop in reverse flow valves FMP 0,00,50 0,00 0 70 40 0 80 50 - Reverse Flow - In filter direction 9
Dimensions FMP 065 85 Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 0 mm /s (cst). - Density 0.86 kg/dm. - Connections of filter under test G /4. 8 Filter Flow rate Flow rate Filter element l/min l/min Length type Series N Series 00 Ø 68 0 06 0 0 48 4 6 5 50 5 7 68 M5 05-0 0 06 45 5 0 60 57 6 64 6 5 8 77 M5 06-0 5 5 06 6 58 0 79 78 6 84 8 5 94 9 M5 08 - Side Standard position for bypass valve Threaded Connections G / / NPT G /4 E Depth 5 mm M8 5/6 UNC M8 E fixing holes /4 NPT SE 8 (/4-6 UNF) 5/6 UNC 5/6 UNC SE ( /6 - UN) 5/6 UNC 06 46 Filter Length mm Side C lternative position for bypass valve 69 00 0 Indicator and bypass valve positions can be inverted. 40
FMP 5 04 Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 0 mm /s (cst). - Density 0.86 kg/dm. - Connections of filter under test G. 8 Filter Flow rate Flow rate Filter element l/min l/min Length type Series N Series 0 69 50 06 74 57 0 0 98 6 9 0 5 7 56 M5 00-0 0 9 Ø 77 06 7 0 0 48 6 6 5 9 5 08 75 M5 0-0 50 6 06 5 40 0 9 70 6 95 79 5 96 5 M5 - Threaded Connections E Depth 5 mm Side ypass valve standard position G /4 /4 NPT G M0 /8 UNC M0 NPT /8 UNC SE ( /6 - UN) /8 UNC 06 E nr.. fixing holes 40,6 60 SE 6 ( 5/6 - UN) Flanged Connections /4 SE 000 psi/m /8 UNC Depth 5 mm M0 Side C ypass valve alternative position Indicator and bypass valve positions can be inverted. /4 SE 000 psi/unc SE 000 psi/m SE 000 psi/unc /8 UNC M0 /8 UNC Filter Length mm 0 408 4
FMP 0 40 Only for FMP 0 length 4 40 Ch. Indicator connection Plug T - Ch. Ø 05 Ø 8 P0 50 mm P0 550 mm Oil drain plug G /8 - Ch. 8 50 Style P0 standard maintenance from head. Style P0 maintenance option from housing base. Side ypass valve standard position Side C ypass valve alternative position Ch. 46 ypass valve 94 57 E nr. 4 fixing holes Plug T Indicator position Plug T Indicator position Ch. 46 ypass valve 4
FMP 0 Recommended maximum flow rate - Pressure drop of complete filter equal to Δp.5 bar. - Oil kinematic viscosity 0 mm /s (cst). - Density 0.86 kg/dm. - Connections of filter under test G /. Filter Flow rate Flow rate Filter element l/min l/min Length type Series N Series 0 6 07 06 7 0 0 85 6 74 9 5 0 9 M5 45-0 48 9 06 70 0 0 76 00 6 95 5 440 78 M5 445-0 9 55 06 5 00 0 47 67 6 440 75 5 450 47 M5 465-0 54 98 06 75 0 0 40 75 4 6 447 8 5 467 4 M5 475 - Threaded Connections G /4 /4 NPT G / / NPT SE 0 ( 5/8 UN) SE 4 ( 7/8 UN) Flanged Connections /4 SE 000 psi/m /4 SE 000 psi/unc / SE 000 psi/m / SE 000 psi/unc Filter Length 4 mm 6 86 58 67 E Depth 5 mm M / UNC M / UNC / UNC / UNC E Depth 5 mm M / UNC M / UNC 4
Spare parts FMP 4 6 5f 5g 5e 5d 5a 5b 5c 5h 5m Pos. Description Qty. FMP Series FILTER 065 - - 5 - - 0 - - - 4 Complete filter See order table Filter element See order table ypass assembly 000 (NR) 00096 (NR) 00085 (FPM) 00097 (FPM) 4 Non bypass assembly 0004 (NR) 00098 (NR) 00086 (FPM) 00099 (FPM) 5 Seal kits NR FPM NR FPM NR FPM 005067 005078 00509 005094 005074 005085 5a 5b 5c Filter element O-Ring O-Ring for housing nti-extrusion ring OR 400 OR 06 OR 44 Ø 4.99 x.5 Ø 6.65 x.6 Ø 9.69 x.5 OR 59 OR 56 pcs. OR 50 Ø 55.56 x.5 Ø 64.77 x.6 Ø 88.57 x.6 Parbak 7 Parbak 44 pcs. Parbak 5 Ø 54.5 x Ø 6.96 x.8 Ø 89.6 x.8 5d Gasket 000058 000046 000058 000046 000058 000046 (NR) (FPM) (NR) (FPM) (NR) (FPM) 5e O-Ring O-R 050 Ø.4 x.78 5f p or Non p O-Ring onded seal G / - FPM O-R 4 (NR 90 Sh ) Ø 6,4 x,6 5g p or Non p O-Ring OR 050 OR 06 Ø.4 x.78 Ø 6,65 x,6 5h Protective seal 0065 006509 00650 5m Oil drain plug (not all model) - - G /8 with bonded seal 6 Indicator plug T TV T TV T TV - Indicators See order table 44
Filter assembly FMP Example: FMP 065 G 0 N P0 Filter element P 4 5 6 7 6 4 7 Ordering information FMP Example: P 065 0 N P0 - Size 6 - Filter elements 8b 8a 065 5 0 - Filter length - Valves 4 - Seals 4 (only for FMP 0) S C D V Z T E Without bypass side - Optional With bypass side - Standard With bypass side C - Optional With bypass side + check valve* With Reverse Flow* (Only for size 0) With Reverse Flow + bypass* (Only for size 0) Without bypass + check valve* Without bypass side C - Optional *Reduced cross-section oilways NR 0 Inorganic microfibre µ 06 Inorganic microfibre 6 µ 0 Inorganic microfibre 0 µ 6 Inorganic microfibre 6 µ 5 Inorganic microfibre 5 µ M5 Stainless steel mesh 5 µ (style N only) 7 - Filter elements collapse pressure N R S 8 - Options a) Filter P0 0 bar 0 bar 0 bar (Filter with reverse flow + bypass) 0 bar (Filter with reverse flow) MP Standard filters P0 Maintenance from housing base (only for FMP 0-4) Pxx Customer request b) Filter element P0 MP Filtri standard ßx (c) 000 See page 0 V FPM Pxx 5 - Connections Type 065 5 0 Customer request G G / G /4 G /4 G G /4 G G / G / NPT /4 NPT /4 NPT G4 /4 NPT NPT / NPT G5 SE 8 (/4 6 UNF) SE ( - /6 UN) SE 0 ( 5/8 UN) G6 SE ( - /6 UN) SE 6 ( - 5/6 UN) SE 4 ( 7/8 UN) F - /4 SE 000 PSI/M - /4 SE 000 PSI/M F - SE 000 PSI/M - / SE 000 PSI/M F - /4 SE 000 PSI/UNC - /4 SE 000 PSI/UNC F4 - SE 000 PSI/UNC - / SE 000 PSI/UNC DIFFERENTIL INDICTORS (see page 5) MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. ll rights reserved The data in this publication is marketing information. MP Filtri reserves the right to make changes to the product described herein at any time it deems fit in relation to technical or commercial requirements. The colors of the products shown on the cover are for illustration purposes only. Copyright. ll rights reserved. 45