Hypersonic flow and flight

Similar documents
Boundary-Layer Theory

FUNDAMENTALS OF AERODYNAMICS

Fundamentals of Aerodynamits

Fundamentals of Aerodynamics

CALCULATION OF SHOCK STAND-OFF DISTANCE FOR A SPHERE

Lecture1: Characteristics of Hypersonic Atmosphere

Nonlinear Transition Stages in Hypersonic Boundary Layers: Fundamental Physics, Transition Control and Receptivity

Outlines. simple relations of fluid dynamics Boundary layer analysis. Important for basic understanding of convection heat transfer

NUMERICAL SIMULATION OF HIGH-SPEED SEPARATION FLOW IN THE AEROSPACE PROPULSION SYSTEMS

Introduction to Fluid Mechanics. Chapter 13 Compressible Flow. Fox, Pritchard, & McDonald

58:160 Intermediate Fluid Mechanics Bluff Body Professor Fred Stern Fall 2014

Detailed Outline, M E 320 Fluid Flow, Spring Semester 2015

DRAG REDUCTION FOR HYPERSONIC RE- ENTRY VEHICLES

REDUCTION OF AERODYNAMIC HEATING AND DRAG WITH OPPOSING JET THROUGH EXTENDED NOZZLE IN HIGH ENTHALPY FLOW

Compressible Potential Flow: The Full Potential Equation. Copyright 2009 Narayanan Komerath

1. Introduction Some Basic Concepts

Department of Mechanical Engineering

Ramjets: Thermal Management An Integrated Engineering Approach

WAVERIDER DESIGN WITH PARAMETRIC FLOW QUALITY CON- TROL BY INVERSE METHOD OF CHARACTERISTICS

Compressible Flow. Professor Ugur GUVEN Aerospace Engineer Spacecraft Propulsion Specialist

Computational Analysis of Scramjet Inlet

Contents. I Introduction 1. Preface. xiii

Chemical and Biomolecular Engineering 150A Transport Processes Spring Semester 2017

Comparison of drag measurements of two axisymmetric scramjet models at Mach 6

An Approximate Engineering Method for Aerodynamic Heating Solution around Blunt Body Nose

Aerodynamics Simulation of Hypersonic Waverider Vehicle

Introduction to Aerospace Engineering

Fundamentals of Fluid Mechanics

CFD Analysis of the Effect of Material Properties of Nose Cone on the Heat Flux and Thermal Field during Re-entry of Space Vehicle

Introduction to Aerodynamics. Dr. Guven Aerospace Engineer (P.hD)

THE EFFECT OF LEADING EDGE ROUNDING ON A CARET WAVERIDER CONFIGURATION AT MACH 8.2

Detailed Outline, M E 521: Foundations of Fluid Mechanics I

Investigation of Flow Field in a Typical Hypersonic Wind Tunnel over a Standard Mode

Table of Contents. Foreword... xiii. Preface... xv

4.2 Concepts of the Boundary Layer Theory

CFD Validation Studies for Hypersonic Flow Prediction

WALL ROUGHNESS EFFECTS ON SHOCK BOUNDARY LAYER INTERACTION FLOWS

Numerical studies of real-gas effects on two-dimensional hypersonic shock-wave/boundary-layer interaction

Hermann Schlichting (Deceased) Klaus Gersten. Boundary- Layer Theory. Ninth Edition

The Computations of Jet Interaction on a Generic Supersonic Missile

Introduction to Heat and Mass Transfer. Week 12

High Speed Aerodynamics. Copyright 2009 Narayanan Komerath

Application of Modified Newton Flow Model to Earth Reentry Capsules

INTRODUCCION AL ANALISIS DE ELEMENTO FINITO (CAE / FEA)

NAPC Numerical investigation of axisymmetric underexpanded supersonic jets. Pratikkumar Raje. Bijaylakshmi Saikia. Krishnendu Sinha 1

8th European Symposium on ATD for Space Vehicle, Lisbon, 2-6 March 2015

Entry Aerodynamics MARYLAND U N I V E R S I T Y O F. Entry Aerodynamics. ENAE Launch and Entry Vehicle Design

Three fast computational approximation methods in hypersonic aerothermodynamics

Chapter 1: Basic Concepts

Shock tunnel operation and correlation of boundary layer transition on a cone in hypervelocity flow

PREDICTION OF SOUND PRESSURE LEVELS ON ROCKET VEHICLES DURING ASCENT Revision E

AA214B: NUMERICAL METHODS FOR COMPRESSIBLE FLOWS

NUMERICAL INVESTIGATION ON THE FLOW CHARACTERISTICS OF A SUPERSONIC JET IMPINGING ON AN AXI-SYMMETRIC DEFLECTOR

Numerical Study of Hypersonic Receptivity with Thermochemical Non-Equilibrium on a Blunt Cone

Detached Eddy Simulation on Hypersonic Base Flow Structure of Reentry-F Vehicle

NUMERICAL OPTIMIZATION OF THE SHAPE OF A HOLLOW PROJECTILE

Numerical Investigation of Wind Tunnel Wall Effects on a Supersonic Finned Missile

Wall thickness optimization of a transpirationcooled sharp leading edge at atmospheric re-entry

LAMINAR FLOW CONTROL OF A HIGH-SPEED BOUNDARY LAYER BY LOCALIZED WALL HEATING OR COOLING

AEROTHERMODYNAMIC TOPOLOGY OPTIMIZATION OF HYPERSONIC RE-ENTRY VEHICLE WITH AEROSPIKE BY USING CFD

Numerical Investigation of Shock wave Turbulent Boundary Layer Interaction over a 2D Compression Ramp

ENGINEERING FLUID MECHANICS. CHAPTER 1 Properties of Fluids

Transient growth of a Mach 5.92 flat-plate boundary layer

Numerical Study of Hypersonic Receptivity with Thermochemical Non-Equilibrium on a Blunt Cone

Simulating Drag Crisis for a Sphere Using Skin Friction Boundary Conditions

Fluid Dynamics Exercises and questions for the course

Part 3. Stability and Transition

Principles of Convection

Introduction and Basic Concepts

SIMULATION TECHNIQUES IN HYPERSONIC AEROTHERMODYNAMICS

2 Local Heat Transfer Simulation for Stagnation Point

CALIFORNIA POLYTECHNIC STATE UNIVERSITY Mechanical Engineering Department ME 347, Fluid Mechanics II, Winter 2018

Numerical investigation of swirl flow inside a supersonic nozzle

AIAA NUMERICAL SIMULATION OF LEADING EDGE RECEPTIVITY OF STETSON'S MACH 8 BLUNT CONE STABILITY EXPERIMENTS. Xiaolin Zhong * and Yanbao Ma

QUASI TRANSIENT CALCULATION OF SURFACE TEMPERATURES ON A REUSABLE BOOSTER SYSTEM WITH HIGH ANGLES OF ATTACK. Thesis. Submitted to UNIVERSITY OF DAYTON

Chapter 3 Lecture 8. Drag polar 3. Topics. Chapter-3

Chapter 9 Flow over Immersed Bodies

Scaling Parameters in Rarefied Flow and the Breakdown of the Navier-Stokes Equations Mechanical Engineering Research Report No: 2004/09

Studies on the Transition of the Flow Oscillations over an Axisymmetric Open Cavity Model

Convection. forced convection when the flow is caused by external means, such as by a fan, a pump, or atmospheric winds.

Prof. Scalo Prof. Vlachos Prof. Ardekani Prof. Dabiri 08:30 09:20 A.M 10:30 11:20 A.M. 1:30 2:20 P.M. 3:30 4:20 P.M.

Modeling of Plasma Formation in Rarefied Hypersonic Entry Flows

Modelling Nozzle throat as Rocket exhaust

Computation of Surface Heat Transfer Rate on Apollo CM Test Model in Free-Piston Shock Tunnel HIEST

AEROSPACE ENGINEERING DEPARTMENT. Second Year - Second Term ( ) Fluid Mechanics & Gas Dynamics

Heat transfer measurements on a circular cylinder in hypersonic flow

Egon Krause. Fluid Mechanics

UNSTEADY DISTURBANCE GENERATION AND AMPLIFICATION IN THE BOUNDARY-LAYER FLOW BEHIND A MEDIUM-SIZED ROUGHNESS ELEMENT

Effective Boundary Conditions for Continuum Method of Investigation of Rarefied Gas Flow over Blunt Body

William В. Brower, Jr. A PRIMER IN FLUID MECHANICS. Dynamics of Flows in One Space Dimension. CRC Press Boca Raton London New York Washington, D.C.

Numerical and Experimental Investigations on Mach 2 and 4 Pseudo-Shock Waves in a Square Duct

High Pressure Zone Capture Wing Configuration for High Speed Air Vehicles

HYPERSONIC vehicles generate multi-scale gas flows as a result of both large variations in mean-free-path and

Given a stream function for a cylinder in a uniform flow with circulation: a) Sketch the flow pattern in terms of streamlines.

Hypersonic Flight Effects on Optical Sensors

Flow Simulation over Re-Entry Bodies at Supersonic & Hypersonic Speeds

Steady waves in compressible flow

Aerothermodynamics of High Speed Flows

Fundamentals of Fluid Dynamics: Elementary Viscous Flow

Numerical Study of Boundary-Layer Receptivity on Blunt Compression-Cones in Mach-6 Flow with Localized Freestream Hot-Spot Perturbations

Transcription:

University of Stuttgart, Aerospace Engineering and Geodesy Dept. - Lecture - Hypersonic flow and flight Master Level, Specialization 4 lecture hours per week in WS, 3-6 LPs/ECTS Lecturer: Dr. Markus J. Kloker

NASP Study (USA, 1986) X-43 (USA, 2005) Shuttle (USA, 1981) When which body shape and why? Sänger-Studie (GER) 1963/88

Contents (1) 0 Motivation, own research work (transition, film cooling) I Inviscid I.1 Velociy-altitude map I.2 Shock relations, Tsien s similarity parameter I.3 Expansion wave relations I.4 Waverider principle I.5 Dynamic pressure, total pressure, pressure coefficient, total-pressure loss: definitions and flow-physical meaning in hypersonics I.6 Methods to gain c p based on local surface inclination I.6.1 Newtonian theory I.6.2 Modified Newtonian theory: inclined plate, sphere I.6.3 Methods for sharp bodies only: tangent wedge/cone, shock-expansion I.7 Mach-number independence and similarity for slender bodies I.8 Small-disturbance-theory application: pointed slender circular cone I.9 Conical flow: pointed circular cone, Taylor-Maccoll equation, 3D effects, elliptic cone I.10 Fundamental aspects of flow-field computations - shock fitting/capturing I.10.1 Space-marching techniques, subsonics problem I.10.2 Time-marching: steady/unsteady flow

Contents (2) I.11 Shock standoff distance I.12 Aspects of inviscid/viscous CFD results and the Hyper-X(-43) project II II.1 II.1.1 II.1.2 II.1.2.1 II.1.2.2 II.1.2.3 II.1.3 II.1.3.1 II.1.3.2 Viscous Boundary layers: Navier-Stokes equations and friction terms, parabolized equations volumetric viscosity / second viscosity / thermal relaxation experimental simulation: problems of kinematical inversion Laminar boundary layers and boundary-layer equations Self-similar solutions Flat plate velocity /temperature profile, recovery-temperature, friction /heat coefficient (stanton number), Reynolds analogy Pointed circular cone Stagnation flow: inkompressible case revisited; body shape and boundary-layer state: wall heating Turbulent boundary layers Flat plate: velocity profiles, scaling (van Driest) recovery temperature, wall heating Pointed circular cone

Contents (3) II.1.4 The reference-temperature concept II.2 Laminar-Turbulent Transition II.2.1 Fundamental scenarios: regular, bypass, transient growth; receptivity II.2.2 Linear Stability Theory: disturbance amplification, Mach number influence, vorticity (1 st ) mode and acoustic (2 nd ) mode, supersonic disturbance II.2.3 Transition Prediction: e-to-the-n method (smooth wall); simplified methods (rough wall) II.2.4 wall-cooling, radiation adiabatic wall (radiative equilibrium) II.2.5 Effects of other parameters II.3 Viscous Interaction (boundary-layer/external flow ) II.3.1 pressure interaction near leading edge II.3.2 shock/boundary-layer interaction, front spike III III.1 III.2 High-Temperature Effects gas models: vibrational excitation, dissociation; related velocity-altitude map for earth atmosphere Thermochemical States: equilibrium, frozen flow, non-equilibrium, Damköhler number,

Contents (4) III.2.1 III.2.1.1 III.2.1.2 III.2.1.3 III.2.1.4 III.2.2 III.2.2.1 III.2.2.2 III.2.2.3 III.2.3 III.2.3.1 III.3 Inviscid flow in equilibrium thermodynamics: molecules degrees of freedom chemistry: dissociation-/recombination reactions speed of sound= f (temperature, pressure) Normal shock: reduction of temperature rise Blunt body: reduction of shock stand-off distance Oblique shock: larger maximum deflection angle Nozzle flow: temperature rise by reombinations Inviscid flow in non-equilibrium Nozzle flow: thermochemically, thermally frozen Normal shock: route from frozen state to equilibrium Blunt body: regions of iso-thermochemical states Viscous flow: diffusion; wall heat flux dependent on wall catalycity Stagnation flow: boundary-layer profiles and wall heat flux = f (reaction rates in the boundary layer with binary gas) Aspects of the SHEFEX project (facetted forebody nose)

Contents (5) Basic literature [1] John D. Anderson Jr.: Hypersonic and High-Temperature Gas Dynamics. AIAA, 2006, 2 nd edition (McGraw-Hill, 1989), ISBN 1-56347-780-7 (ca. 95) [2] Ernst H. Hirschel: Basics of Aerothermodynamics. Springer, 2004, ISBN 3-540-22132-8 (ca. 65/95) [3] Johann T. Heynatz: Hyperschallströmungen Grundlagen und Hinweise. Verlag Dieter Thomas, 1997, ISBN 3-931776-11-5 (ca. 34) [4] John D. Anderson Jr.: Modern Compressible Flow. McGraw-Hill, 3 rd ed. 2004, ISBN 978-0071241366 ( 60-220). [5] Maurice Rasmussen:. Wiley Interscience, 1994, ISBN 0-471-51102-1 ( 185) [6] Frank M. White: Viscous Fluid Flow. McGraw-Hill, 3 rd ed. 2005, ISBN 978-0071244930 ( 60-220) [7] Hermann Schlichting, Klaus Gersten: Boundary-Layer Theory. Springer, 8 th ed. 2003, ISBN 3-540-66270-7 (or: previous eds. McGraw-Hill)

Newtonian Theory for inviscid c p, c D, c L local surface area modified Newtonian: 0.92 M >>1 c D Locally: c p =c ps sin 2 - Newtonian: c ps = 2 - modif. Newt. c ps = 1.84 (air) (> 1!) M Fig. Drag coefficient for a sphere and cylinder with conical forebody as a function of Mach number (symbols: flight experiments) [1]. Mach number independence starts earlier for blunt bodies because of larger shock angles. c D (sphere, M =0) is for 10 3 Re D 10 5 (laminar separation).

Laminar-turbulent Transition (5) a) b) T W /T 0 2500 [K] 2000 T W 1500 1000 T trans, max > T turb 500 0 0.1 0.5 x/l 1.0 V Fig. Temperature along laminar-turbulent transition a) pointed circular cone with flare, M=6, R nose =2.5μm [Horvath et. al, RTO-RSM-AVT-111, Prag, 2004]. b) symmetry line for Sänger lower stage, Re unit =1.5 10 6 /m, L V =55m, M=6.8, =6 at adiabatic (ε=0) and radiation-adiabatic (cooled, ε=0.85) wall; steady CFD with transition position fixed [2]). With radiative equilibrium the temperature increase is strong. During transition the turbulent value is often surpassed.

Viscous interaction (1) Fig. a Effect of an aerospike. 1 front shock by spike, 2 recirculation region, 3 separation shock, 4 re-attachment shock. Density, Mach 7, thesis by Gauer, HyShot-IAG, 2006 (2-d axisymmetric CFD).

Viscous interaction (2) Fig. b Aerospike with L/D=2, D/d=4, density- and axial velocity at M=7. L spike length, D nose diameter of main body, d of forebody; drag reduction: 46%.

Viscous interaction (3) Fig. c Like fig. b, temperature distribution (upper) and u-isolines in the recirculation region (lower); middle: perspective view.