Supporting information S1. Procedures Materials and methods Preparation of the reagents Preparation of the calibration standard solutions

Similar documents
Supporting Information for On the relationship between structure and reaction rate in olefin ring-closing metathesis

Selective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3

Supporting Information

Supporting Information. Labeled Ligand Displacement: Extending NMR-based Screening of Protein Targets

2017 Reaction of cinnamic acid chloride with ammonia to cinnamic acid amide

The Theory of HPLC. Quantitative and Qualitative HPLC

Red Color CPL Emission of Chiral 1,2-DACH-based Polymers via. Chiral Transfer of the Conjugated Chain Backbone Structure

Supporting Information

Supporting Information

Supporting Information

Simple Solution-Phase Syntheses of Tetrahalodiboranes(4) and their Labile Dimethylsulfide Adducts

Annex 2 Formaldehyde

Selective Formation of Benzo[c]cinnoline by Photocatalytic Reduction of 2,2 Dinitrobiphenyl with TiO 2 and UV light irradiation

Adam Wu, Jean Michel Lauzon, Indah Andriani, and Brian R. James*

Supporting Information

Supporting Information

Catalytic hydrogenation of liquid alkenes with a silica grafted hydride. pincer iridium(iii) complex: Support for a heterogeneous mechanism

Stoichiometric Reductions of Alkyl-Substituted Ketones and Aldehydes to Borinic Esters Lauren E. Longobardi, Connie Tang, and Douglas W.

Electronic Supplementary Material

Electronic Supplementary Information

A fluorescent ph probe for acidic organelle in living cells

Supporting Information. for. Synthetic routes to [Au(NHC)(OH)] (NHC = N- heterocyclic carbene) complexes

Chem 230, Fall, 2014 Homework Set # 4 LONG ANSWER SOLUTIONS

Catalytic Reductive Dehydration of Tertiary Amides to Enamines under Hydrosilylation Conditions

Supporting Information. Competitive Interactions of π-π Junctions and their Role on Microphase Separation of Chiral Block Copolymers

A contribution from the Department of Chemistry, Washington University, Campus Box 1134, One Brookings Drive, Saint Louis, Missouri 63130

Supporting Information

Supporting Information 1. Rhodium-catalyzed asymmetric hydroalkoxylation and hydrosufenylation of diphenylphosphinylallenes

Electronic Supplementary Information

Supporting Information:

Cationic Alkylaluminum-Complexed Zirconocene Hydrides as Participants in Olefin-Polymerization Catalysis. Supporting Information

Fluorescent Chemosensor for Selective Detection of Ag + in an. Aqueous Medium

Supporting Information for

Supporting Information for: Using a Lipase as a High Throughput Screening Method for Measuring the Enantiomeric. Excess of Allylic Acetates

Straightforward Synthesis of Enantiopure (R)- and (S)-trifluoroalaninol

Yujuan Zhou, Kecheng Jie and Feihe Huang*

Supramolecular chemical shift reagents inducing conformational transition: NMR analysis of carbohydrate homooligomer mixtures

Chemical synthesis (see also reaction scheme, bold underlined numbers in this text refer to the bold underlined numbers in the scheme)

Electronic Supplementary Information for: agent. Adam J. Plaunt, Kasey J. Clear, and Bradley D. Smith*

Supplementary Figure 1 IR Spectroscopy. 1Cu 1Ni Supplementary Figure 2 UV/Vis Spectroscopy. 1Cu 1Ni

Supporting Information

SUPPORTING INFORMATION

Electronic Supplementary Information

Supporting Information

Supporting Information

Iridium-catalyzed regioselective decarboxylative allylation of. β-ketoacids: efficient construction of γ, δ-unsaturated ketones

Supporting Information

SUPPORTING INFORMATION. Elucidation of the role of betaine hydrochloride in glycerol esterification: towards bio-based ionic building blocks

Supporting Information

Tetrahydrofuran (THF) was distilled from benzophenone ketyl radical under an argon

Supplementary Information T. Ebert, a A. Wollbrink, b A. Seifert, a R. John, a and S. Spange a

Supporting Information

VEBSA, RRR-VEPSA, RRR-VEBPA, RRR-VEPPA) was obtained from the hydrolysis of the

Novel Supercapacitor Materials Including OLED emitters

Triazabicyclodecene: an Effective Isotope. Exchange Catalyst in CDCl 3

Supporting Information for: Synthesis of Chiral Tryptamines via a Regioselective Indole Alkylation

Supporting Information

Supporting Information

Supporting information. Cooperatively Enhanced Ion Pair Binding with a Hybrid Receptor

Electronic Supplementary Information for. A Redox-Nucleophilic Dual-Reactable Probe for Highly Selective

Aluminum Foil: A Highly Efficient and Environment- Friendly Tea Bag Style Catalyst with High TON

Ratiometric and intensity-based zinc sensors built on rhodol and rhodamine platforms

Supporting information

Supporting Information

Electronic Supplementary Information. Selective detection of Al 3+ and citric acid with a fluorescent amphiphile

Supporting Information. for. Angew. Chem. Int. Ed. Z Wiley-VCH 2003

Electronic Supplementary Information (12 pages)

Hai-Bin Yang, Xing Fan, Yin Wei,* Min Shi*

Coupling of 6 with 8a to give 4,6-Di-O-acetyl-2-amino-2-N,3-O-carbonyl-2-deoxy-α-Dglucopyranosyl-(1 3)-1,2:5,6-di-O-isopropylidene-α-D-glucofuranose.

Supporting Information. Morphological Transformation between Nanocoils and Nanoribbons

Synthesis of fluorophosphonylated acyclic nucleotide analogues via Copper (I)- catalyzed Huisgen 1-3 dipolar cycloaddition

INTERNATIONAL CHEMISTRY TESTING. 258 Main Street- Suite 311- Milford, MA Tel: Fax:

GAFTI Analytical method for ISO/TS 16179:2012 Detection and Determination of Organotin Compounds in Footwear and Apparel Materials by GC-MS

Supporting Information Solid Phase Synthesis of Ultra-Photostable Cyanine NIR dye library

Electronic Supplementary Information

Nanocrystalline Magnesium Oxide-Stabilized Palladium(0): An Efficient and Reusable Catalyst for the Synthesis of N-(2- pyridyl)indoles

Supporting Information. Enantioselective Organocatalyzed Henry Reaction with Fluoromethyl Ketones

Supplementary Figure 2. Full power on times. Histogram showing on times of bursts with 100 pm 1, 100 pm 2 and 1 nm Et 3 N at full laser power.

Fluorescent Bilayer Nanocoils from an Asymmetric Perylene Diimide with Ultrasensitivity for Amine Vapors

Determination of underivatized aflatoxins B2, B1, G2, and G1 in ground hazelnuts by immunoaffinity solid-phase extraction with HPLC-FLD detection

Supporting Information for Synthesis of C(3) Benzofuran Derived Bis-Aryl Quaternary Centers: Approaches to Diazonamide A

Efficient Magnesium Catalysts for the Copolymerization of Epoxides and CO 2 ; Using Water to Synthesize Polycarbonate Polyols

Supporting Information

Supporting Information

Fluorescent probe for Lewisite Simulant

Supporting Information

Mechanically Induced Pyrogallol[4]arene Hexamer Assembly in the Solid State Extends the Scope of Molecular Encapsulation

Sandro Guidi, Marco Noè, Pietro Riello, Alvise Perosa and Maurizio Selva

Amphiphilic diselenide-containing supramolecular polymers

Supporting Information For:

Electronic Supplementary Information for. Biomimetic aerobic oxidative hydroxylation of arylboronic acids to phenols catalysed by a flavin derivative

Synthesis and nucleophilic aromatic substitution of 3- fluoro-5-nitro-1-(pentafluorosulfanyl)benzene

Silver-catalyzed decarboxylative acylfluorination of styrenes in aqueous media

Supporting Information. Table of Contents. 1. General Notes Experimental Details 3-12

Supporting Material. 2-Oxo-tetrahydro-1,8-naphthyridine-Based Protein Farnesyltransferase Inhibitors as Antimalarials

(Co)polymers by Iodine Transfer Polymerization Initiated

Supporting Information

A General and Efficient Method for the Palladium Catalysed Conversion of Allylic Alcohols into their Corresponding Dienes

Supplementary Information. chemical-shift change upon binding of calcium ion

Electronic Supplementary Information. The selective response of templated polymer for the cationic drug

Transcription:

Electronic Supplementary Material (ESI) for Analytical Methods. This journal is The Royal Society of Chemistry 2015 Supporting information S1. Procedures Materials and methods Six oil samples were purchased from local stores in order to test the method. Three extra virgin olive oils one sunflower and one pomace olive oil were analyzed according to the following analytical methods (vide infra). Pyridine 99%, tributyl amine, deuterated chloroform, trifluoroacetic anhydrite 99%, 4-tert-butylphenol 99%, pentan-2-ol 99%, Oleic acid 90%, - tocopherol 98%, -sitosterol 70%, cyclohexanol 98%, homovalillyl alcohol 98% 2,2- dimethylcyclohexanol 98%, tyrosol 98%, tert-butanol 98%, 1,2-dipalmitoyl-rac-glycerol 99%, glyceryl 1,3- dipalmitate 99%, and maleic acid standard for quantitative NMR were purchased from Aldrich. Preparation of the reagents Stock solution of trifluoroacetic anhydrite and pyridine solutions, 1.35 M each, were prepared in deuterated chloroform. Teflon needles and glass syringes were used to transfer and measure the volumes of the neat trifluoroacetic anhydrite. Standard solutions of trifluoroacetic anhydrite were kept in glass bottles covered with teflon caps at 4 C. Closed bottles could be stored for over six months. However routinely used solutions requires replacement with fresh ones every 4 days. Oleic acid, standards solutions of α-tocopherol, β-sitosterol tyrosol, homovanilyl alcohol, eicosanol, homovanillyl alcohol, 1,2- and 1,3- diglycerols, 2,2 -dimethylcyclohexanol, tertbutanol, pentan-2-ol and cyclohexanol and prepared in deuterated chloroform at concentrations of 0.140 M and 10.0 mm. All the solutions were quantified based on the integrals of 1 H NMR spectra of the maleic acid analytical standard. Preparation of the calibration standard solutions Volumes of 10.0-200 L of the stock solutions of OHs ( -tocopherol, tyrosol, -sitosterol, eicosanol, homovanillyl alcohol, 1,2- and 1,3- diglycerols, 2,2 -dimethylcyclohexanol and oleic acid ) were transferred in the NMR tubes, to give assays with final concentrations 1.40 150 mm in OHs. Similar experiments were conducted for the OHs using olive oil as solvent. In each tube, 50.0 L of the standard (tert-butanol or pentan-2-ol or cyclohexanol) were added. Trifluoroacetic anhydrite (50.0 L 1.35 M) and pyridine (15.0 L, 1.35 M) were added and the volume was completed up to 500.0 L with CDCl 3. Similar experiments were performed in CD 2 Cl 2 for the assignment of the 19 F NMR signals originated from the solvents impurities. Precaution must be taken in the use of the trifluoroacetic anhydrite because it is fuming and corrosive and must be handle with care in the hood. Oil esterification experiments. No base experiment (Procedure A). An oil sample (0.4000 0.5000 g) and internal standard, tert-butanol, or pentan-2-ol or cyclohexanol, (50.0 L, 0.140 M) were allowed to react with excess trifluoroacetic anhydrite (80.0-150 μl depending on the H 2 O content of oil, 1.35 M in CDCl 3 ) at

room temperature. The mixture was shaken for 1 min, allowed to react for 30 min, and 100 μl of CDCl 3 were added. The solution was transferred in a 5 mm NMR tube and measured. The samples were prepared in quadruplicate. Experiment with base (Procedure B). The same procedure was followed as above with the difference of the addition of base (pyridine or tributyl amine, 25-50 L, 1.35 M in CDCl 3 ) at room temperature. The reaction is completed in less than 5 min. The samples were prepared in quadruplicate. Water washing experiments (Procedure C). In this experiment the samples with base were washed several times with a saturated solution of NaCl (5x100 L). The organic phase was dried with 4 Å molecular sieves before acquisition. The samples were prepared in quadruplicate. 19 F NMR. The spectra were recorded using 18.5 μs pulse (90 ), an acquisition time of 2.24 s, a spectral width of 2737 Hz, 32 scans (+ 4 dummy scans), delay time 8.0 s, at a 470.4 MHz on a 500 MHz Bruker NMR spectrometer. T1 values calculated from inversion recovery experiments. The chemical shifts are expressed in δ scale (ppm). The region of the NMR studied extends from -76.5 ppm to -74.5 ppm. The calibration for 19 F NMR signals was done using CFCl 3 as reference. Quantification procedure and data analysis The 19 F NMR spectra were manipulated with an NMR software [MestreLab Mnova] and a fitting procedure was applied in order to eliminate the line broadening originated from the fast chemical exchange between the anhydrite and the acid trifluoroacetic moieties at the presence of pyridine. The fitting of the spectra resulted in easier and more accurate quantification of the species in solution. The baseline correction and the phase of the spectra was fixed with the same software and the results expressed at mg of compound per Kg of oil (mg.kg -1 ). The amount of each oil component was calculated as the average of the values from four measurements. LOD and LOQ values were calculated for the OHs from (i) the standard deviation (std) of the intercept and the slope of the calibration curves and (ii) from the S/N ratio calculated for the olive oil spectra and the spectra of blank solutions missing the analyte. All spectra used for LOD and LOQ calculations were derived from 32 scans accumulation.

Figure S1. Linear relationship of the added -tocopherol in CDCl 3 vs the calculated from the integration of the 19 F NMR peak of the -tocopheryl-trifluoroacetate compared to that of the internal standard (2-pentyl-trifluoroacetate). The purity of the commercial -tocopherol (95.73 %) used in this experiment was determined by 1 H NMR and elemental analysis. The concentration of the added -tocopherol was accordingly corrected. Experiments performed according to the procedure for the calibration standard solutions. LOD and LOQ were 16 and 49 mg/l respectively based on std calculations. Error bars are too small to see.

Figure S2. Linear relationship of the concentration of the -tocopherol (the added plus the natural occurring in the olive oil) vs the calculated from the integration of the 19 F NMR peaks of the internal standard (2-pentyl-trifluoroacetate) and the -tocopheryl-trifluoroacetate. The purity of the commercial -tocopherol (95.73 %) used in this experiment was measured by 1 H NMR and elemental analysis. The concentration of the added -tocopherol was accordingly corrected. Experiments performed according to the procedure B. LOD and LOQ were 16 and 47 mg/kg respectively based on std calculations. Error bars are too small to see.

Figure S3. Linear relationship of the added -sitosterol in CDCl 3 vs the calculated from the integration of the 19 F NMR peaks of the -sitosteryl-trifluoroacetate compared to that of the internal standard (2-pentyl-trifluoroacetate). The purity of the commercial -sitosterol (78.45 %) used in this experiment was measured by 1 H NMR and elemental analysis. The concentration of the added -sitosterol was accordingly corrected. Experiments performed according to procedure for the for the calibration standard solutions. LOD and LOQ were 18 and 53 mg/l respectively based on std calculations. Error bars are too small to see.

Figure S4. Linear relationship of the added tyrosol in CDCl 3 vs the calculated from the integration of the 19 F NMR peaks of the tyrosyl-trifluoroacetate compared to that of the internal standard (2- pentyl-trifluoroacetate). The purity of the commercial tyrosol (98.12 %) used in this experiment was measured by 1 H NMR and elemental analysis. The concentration of the added tyrosol was accordingly corrected. Experiments performed according to procedure for the calibration standard solutions. LOD and LOQ were 7.0 and 22 mg/l respectively based on std calculations. Error bars are too small too see.

Figure S5. Linear relationship of the added oleic acid in CDCl 3 vs the calculated from the integration of the 19 F NMR peaks of the oleic-trifluoroacetic anhydride compared to that of the internal standard (2-pentyl-trifluoroacetate). The purity of the commercial oleic acid (92.02 %) used in this experiment was measured by 1 H NMR and elemental analysis. The concentration of the added oleic acid was corrected accordingly. Experiments performed according to procedure for the calibration standard solutions. LOD and LOQ were 141 and 307 mg/l respectively based on std calculations. Error bars are too small to see.

Figure S6. 19 F NMR spectrum of virgin olive oil treated with trifluoroacetic anhydrite according to procedure B (black line) and the 19 F NMR spectrum after subtraction of the broad trifluoroacetic acid/trifluoroacetic anhydrite coalescent peak (red line). The broad trifluoroacetic acid/trifluoroacetic anhydrite peak was substracted by fitting the peak at -75.7005 ppm of 84.45 Hz width and Lorentzian/Gaussian ratio equal to 0.80. DG=diglycerides.

1,2-DG 1,3-DG sterols TFA * elanoic tyrosol -tocopherol MG -74.95-75.35-75.75 ppm Figure S7. 19 F NMR spectrum of a virgin olive oil: treated with trifluoroacetic anhydrite according to procedure A (black line) and after the addition of pyridine according to procedure B, (red dashed line). In both 19 F NMR spectra the trifluoroacetic acid/trifluoroacetic anhydrite peaks have been substracted. The * indicates an impurity contained in the solvent. DG=diglycerides, MG=monoglycerides, TFA=trifluoroacetic anhydrite.

Table S1. 19 F NMR chemical shifts of the major CF 3 COO-derivatives of the OHs of an oil sample. T1 values calculated from inversion recovery experiments. The sample contained oil (0.457g), tert-butanol (50 L, 0.1400 M in CDCl 3 ), trifluoroacetic anhydrite (100 μl, 1.35 M in CDCl 3 ), pyridine (30 μl, 1.35 M in CDCl 3 ) and 100 L CDCl 3. OHs Compounds Chemical Shift / ppm T1 / s -tocopherol -74.847 0.72 Tyrosol (aromatic) -74.965 1,2-DG -75.150 0.87 1-MG -75.185 1,3-DG -75.264 0.87 -sitosterol -75.562 1.66 aliphatic alcohols -75.31 to -75.50 other alcohols -75.558, -75.554 free fatty acids -75.929 1.30 allyl, aromatic acids -75.632, -75.623

Table S2. The score of four different independent measurements of -tocopherol in three different edible oils using 19 F NMR according to the procedure B and HPLC analysis of -tocopherol of the same oils. (HPLC analysis was performed by Medalion Labs, Method of analysis: Samples are saponified by refluxing in ethanolic KOH. The organic extracts are diluted to standard volumes and are submitted to reverse-phase HPLC analysis using a C8 column with isocratic elution. - tocopherol is detected using a fluorescence detector. Quantitation was performed by comparison to a standard curve. mg/kg of -tocopherol Sample / Anal. Pomace Oil Virgin Oil Sunflower Oil Method 19 F NMR measurement 1 214 113 594 measurement 2 216 113 603 measurement 3 215 110 590 measurement 4 217 109 592 Mean Value 216±2 111±2 595±5 HPLC measurement 208 111 589

Table S3. The mean values of four different independent measurements of -sitosterol, 1,2- diglycerides and 1,3-diglycerides in three different edible oils, by 19 F NMR according to the procedure A, B and C, and by GC analysis performed by Food Alergen Laboratory (values in parentheses). -sitosterol * 1,2-DG 1,3-DG mg/kg % of all diglycerides Pomace Oil 2396±8 (2375) 36.2 (36.3) 63.8 (63.7) Virgin Oil 1212±5 (1199) 29.9 (29.0) 70.1 (71.0) Sunflower Oil 3249±9 (3201) 29.4 (28.2) 70.6 (71.8) * The amount of -sitosterol is actually the mixture of -sitosterol and other minor sterols with similar - OH chemical environment such as campesterol etc. These values are the sum of sterols presents in these oils.