Features/Benefits Broad range of operating forces Ratings up to 21 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics Portable tools Specifications RATING: From low level* to 21 AMPS @ 277 V AC. ELECTRICAL LIFE: 00,000 cycles at 10 AMPS @ 250 V AC, consult Customer Service Center for typical life of higher rated switches. INSULATION RESISTANCE: 1,000 M ohm min. DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level. OPERATING TEMPERATURE: 0ºF to 185ºF ( 0ºC to 85ºC). OPERATING FORCE: From 15 to 00 grams at actuator button available. MOUNTING: Torque screws 2-5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA max. @ 20 V AC or DC max. Standard electrical life per UL 105, rated for 6,000 operations. Materials SWITCH HOUSING: Thermoplastic (UL 9V-0). ACTUATOR BUTTON: Thermoplastic (UL 9V-0). SPRING: Copper alloy. PIVOT: Brass alloy. MOVABLE S: Gold alloy for ratings 1 AMP or less. Fine silver for ratings greater than 1 AMP up to 15 AMPS. Precious metal alloy for ratings greater than 15 AMPS. STATIONARY S: Gold alloy for ratings 1 AMP or less. Fine silver for ratings greater than 1 AMP. TERMINALS: Brass alloy for ratings up to 10 AMPS. Copper alloy for ratings greater than 10 AMPS. NOTE: Specifications and materials listed above are switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages -6 through -10. For additional options not shown in catalog, consult Customer Service Center. T F Series TF SP, Mom. Operating Force C 5.29 oz./150 grams CC.5 oz./15 grams CD.88 oz./25 grams CF 1.76 oz./50 grams CG 2.65 oz./75 grams EC 7.9 oz./225 grams EE 1.11 oz./00 grams Electrical Rating 6 15 A, 277 V AC; 1/2 HP, 125, 250 V AC; 5 A, 125 V AC L, 0.5 A, 125 V DC; 0.25 A, 250 V DC F5 1 A,125 V AC; 1 A, O V DC H8 5 A, 277 V AC; 1/10 HP, 125, 250 V AC 21 A, 277 V AC; 1 HP, 125 V AC; 2 HP, 250 V AC; 5 A, 125 V AC L K6 11 A, 277 V AC; 1/ HP, 125, 250 V AC; 0.5 A, 125 V DC; 0.25 A, 250 V DC L 20 A, 250 V AC; 1 HP, 125 V AC; 2 HP 250 V AC V1 1 A,125 V AC; 1 A, O V DC (UL/CSA) V2 5 A, 277 V AC; 1/10 HP, 125, 250 V AC (UL/CSA); 5(2) A, 250 V AC (VDE) V 11 A, 277 V AC; 1/ HP, 125, 250 V AC; 0.5 A, 125 V DC; 0.25 A, 250 V DC (UL/CSA); 10() A, 25O V AC (VDE) V 21 A, 277 V AC; 1 HP, 125 V AC; 2 HP, 25O V AC; 5 A, 125 V AC L ; 16() A, 25O V AC (VDE) Mounting Style S Standard V Metric Actuator P00 Pin plunger A10.81" lever roller, high force A15 1." lever roller, high force A20 1.05 lever roller, low force A25 1.56" lever roller, low force T10.8" lever, high force T1 1." simulated roller, high force T1 1.29" simulated roller, high force T15 1.0" lever, high force T16 2." lever, high force T18 2.75" lever, high force T20 1.10" lever, low force T2 1.56" simulated roller, low force T2 1.50 simulated roller, low force T25 1.62" lever, low force T26 2.57" lever, low force T28 2.97 lever, low force WP0 Wide pin plunger Terminations 0.187" quick connect A " quick connect 5A " offset quick connect 5B.187" offset quick connect Circuitry C SPDT W SPST N.C. Y SPST N.O. 5 Dimensions are shown: Inches (mm)
SERIES TF MINIATURE SNAP-ACTING SWITCHES SP MOMENTARY OPERATING FORCE BASIC SWITCH OPERATING FORCE (OZ./GRAMS) CC.5 15 CD.88 25 CF 1.76 50 CG 2.65 75 C 5.29 150 EC 7.9 225 EE* 1.11 00 *Minimums may apply, consult Customer Service Center. Operating Force option CC not available with T18 & T26 Actuator options. Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING MATERIAL COMPLIANT * COMPATIBLE * MOVABLE STATIONARY ELECTRICAL RATING F5 Yes Yes Gold alloy Gold alloy From low level* to 1 AMP @ 125 V AC, 1 AMP @ 0 V DC. H8 Yes Yes 5 AMPS @ 277 V AC; 1/10 HP @ 125 & 250 V AC. Yes Yes 6 Yes Yes 21 AMPS @ 277 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC; 5 AMPS @ 125 V AC L. 15 AMPS @ 277 V AC; 1/2 HP @ 125 & 250 V AC; 5 AMPS @ 125 V AC L. 0.5 AMP @ 125 V DC; 0.25 AMP @ 250 V DC. K6 Yes Yes 11 AMPS @ 277 V AC; 1/ HP @ 125 & 250 V AC; 0.5 AMP @ 125 V DC; 0.25 AMP @ 250 V DC. L Yes Yes Silver alloy 20 AMPS @ 250 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC * Note: See Technical Data section of this catalog for compliant and compatible definitions and specifications. All models with all options,. Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA max. @ 20 V AC or DC max. 6 Dimensions are shown: Inch (mm)
ELECTRICAL RATING MATERIAL COMPLIANT COMPATIBLE MOVABLE STATIONARY V1 Yes Yes Gold alloy Gold alloy V2 Yes Yes V Yes Yes V Yes Yes Precious metal alloy INTERNATIONAL ELECTRICAL RATING From low level* to 1 AMP @ 125 V AC; 1 AMP @ 0 V DC (UL/CSA). 0.1 (0.05) AMP @ 250 V~µ T85 50E (VDE). 5 AMPS @ 277 V AC; 1/10 HP @ 125 & 250 V AC (UL/CSA). 5 (2) AMPS @ 250 V~µ T85 50E (VDE). 11 AMPS @ 277 V AC; 1/ HP @ 125 & 250 V AC; 0.5 AMP @ 125 V DC; 0.25 AMP @ 250 V DC (UL/CSA). 10 () AMPS @ 250 V~µ 50E T85 (VDE). 21 AMPS @ 277 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC; 16 () AMPS @ 250 V~µ T85 10E (VDE). * Note: See Technical Data section of this catalog for compliant and compatible definitions and specifications. NOTE: V1-V ratings available with 5A or 5B terminal styles only. µ ~ T 50E 10E 10() INTERNATIONAL RATING SYMBOLS Microgap construction (less than mm). Alternating current. Maximum rated use temperature. Cycles over 50,000 at rated current. Cycles over 10,000 at rated current. Current Rating: First number represents resistive rating; second number represents inductive (motor) rating. All models with all options,. Consult Customer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. VA max. @ 20 V AC or DC max. OPERATING FORCE ELECTRICAL AMPS CC CD CF CG C EC EE RATING (REF.) (15) (25) (50) (75) (150) (225) (00) F5 1 H8 5 21 X X X X 6 15 X X X X K6 11 X L 20 X X X X V1 1 X X V2 5 X X V 11 X X X V 16 X X X X AVAILABLE x NOT AVAILABLE ** Available with A & 5A terminations only, see page -10. MOUNTING STYLE S STANDARD For -0 screw size V Metric For mm screw size 7 Dimensions are shown: Inches (mm)
ACTUATOR FIG. DIM. A DIM. B DIM. C DIM. D P00 1.80 (20,).578 ±.015 (1,68 ± 0,8) A10 2.81 (20,6).810 ±.020 (20,57 ± 0,51) A15 2 1. (,0).810 ±.00 (20,57 ± 0,76) A20 2 1.05 (26,7) A25 2 1.56 (9,6).810 ±.050 (20,57) ± 1,27.810 ±.075 (20,57 ± 1,91) T10 T15.8 (21,) 1.0 (5,6).600 ±.020 (15,2 ± 0,51).600 ±.00 (15,2 ± 1,02) T16 2. (59,).600 ±.065 (15,2 ± 1,65) T18 T20 2.75 (69,9) 1.10 (27,9).600 ±.080 (15,2 ± 2,0).600 ±.050 (15,2 ± 1,27) T25 T26 T28 T1 T1 T2 T2 WP0 5 1.62 (1,1) 2.57 (65,) 2.97 (75,) 1. (,0) 1.29 (2,8) 1.56 (9,6) 1.50 (8,1).80 (20,) (1,9).600 ±.070 (15,2 ± 1,78).600 ±.150 (15,2 ±,81).600 ±.187 (15,2 ) ±,75.810 ±.00 (20,57 ±0,76).70 ±.00 (18,5 ± 0,76).810 ±.065 (20,57 ± 1,65).70 ± (18,5) ± 1,52.65 ±.015 (16,1 ± 0,8) (6,Ø).25 dia. (6,Ø) NOTE: Switch characteristics chart on following page. 8 Dimensions are shown: Inch (mm)
ACTUATOR SWITCH CHARACTERISTICS OPTION CODE MAXIMUM OPERATING FORCE (OZ./GRAMS) CC CD CF CG C EC EE (15) (25) (50) (75) (150) (225) (00) MINIMUM RELEASE FORCE (OZ./GRAMS) CC CD CF CG C EC EE (15) (25) (50) (75) (150) (225) (00) MAXIMUM DIFFERENTIAL TRAVEL ALL FORCES MAXIMUM PRETRAVEL ALL FORCES MINIMUM OVERTRAVEL ALL FORCES A10.6 1.06 2.29.17 6.5 7.9 1.11 18 0 65 90 180 225 00.21.5.5.5.71 1.98.88 6 10 10 15 20 56 110.015 (0,8).00 A15.28.2 1.06 1.59.59 7.9 8 12 0 5 85 10 225.07.1.1.18.5.71 2.82 2 5 10 20 80.00 (2,5).065 (1,65) A20 0.5 0.71 1.1 2.12.2 6 9.7 0.07 0.11 0.11 0.18 0.2 0.71 1.1 15 20 0 60 120 170 275 2 5 12 20 0 0.025 (0,6) 0.12 (,05) 0.055 (1,0) A25.18.28 56 85 1.69 2.65.1 5 8 16 2 8 75 125.0.07.07.07.21.5.71 1 2 2 2 6 10 20.050 (6,5).120 (,05) P00.5.88 1.76 2.65 5.29 7.9 1.11 15 25 50 75 150 225 00.21.5.5.5 1.2 1.98.88 6 10 10 15 5 56 110.010 (0,25).07 (1,19).050 T10.6 1.06 2.29.17 6.5 7.9 1.11 18 0 65 90 180 225 00.21.5.5.5.71 1.98.88 6 10 10 15 20 56 110.015 (0,8).00 T1.28.2 1.06 1.59.59 7.9 8 12 0 5 85 10 225.07.1.1.18.5.71 2.82 2 5 10 20 80.00 (2,5).065 (1,65) T1.28.2 1.2 1.76.17.76 7.9 8 12 5 50 90 15 225.07.1.1.18.5.71 2.82 2 5 10 20 80.00 (2,5) T15 T16.25.2 1.06 1.1 2.82.1 7.9 7 12 0 0 80 125 225.18.28.5.78 1.59 2.7.2 5 8 15 22 5 70 120.07.1.1.18.28.6 2.82 2 5 8 18 80.0.07.07.07.28.5.71 1 2 2 2 8 10 20.00.05 (1,1).110 (2,59) (6,5).065 (1,65).125 (,18) T18 T20 T2 T2 T25.21.2.71 1.1 2.12.5 6 12 20 0 60 100.5.71 1.1 2.12.2 6 9.70 15 20 0 60 120 170 275.18.28.56.85 1.69 2.65.1 5 8 16 2 8 75 125 0.18 0.28 0.56 0.88 1.76 2.65.76 5 8 16 25 50 75 15.18.28.5.88 1.59 2.7.2 5 8 15 25 5 70 120.0.0.07.18.28.56 1 1 2 5 8 16.21.5.5.5.71 1.98.88 6 10 10 15 20 56 110.0.07.07.07.21.5.71 1 2 2 2 6 10 20 0.0 0.07 0.07 0.11 0.21 0.5 0.71 1 2 2 6 10 20.0.07.07.07.21.5.99 1 2 2 2 6 10 28.062 (1,57).00.050.005.055 (1,0).00 (7,62).10 (,56) (6,5) 0.2 (5,8) (6,5).155 (,9).120 (,05) 0.11 (2.79).125 (,18) T26 T28.1.28.2.85 1.27 2.26 8 12 2 6 6 0.2 0.71 1.06 1.9 12 20 0 55.0.0.05.12.21.9 1 1 1.5.5 6 11 0.0 0.11 0.18 0 1 5 9 (2,5) 0.12 (,05).500 (12,70).0.56 (1.22).25 (5,97) 0.285 (7,2) WP0.5.88 1.76 2.65 5.29 7.9 1.11 15 25 50 75 150 225 00.21.5.5.5 1.2 1.97.88 6 10 10 15 5 56 110.010 (0.25).07 (1,19).00 (0,51) NOTE: For basic switch operating forces, see page -6. HIGH FORCE, LOW MOTION PIVOT POSITION LOW FORCE, HIGH MOTION PIVOT POSITION Available with actuators A10, A15, T10, T1, T1, T15, T16 and T18. Available with actuators A20, A25, T20, T2, T2, T25, T26, and T28. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. 9 Dimensions are shown: Inches (mm)
0.187" QUICK CONNECT TERMINATIONS A " QUICK CONNECT 5A OFFSET " QUICK CONNECT 5B OFFSET.187" QUICK CONNECT CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) 10 Dimensions are shown: Inch (mm)