Gradient-Based Estimation of Air Flow and Geometry Configurations in a Building Using Fluid Dynamic Adjoint Equations

Similar documents
Variable Speed Tri-Rotor Screw Compression Technology

Measuring Friction Losses Using Accelerometer

Charts for the Dynamic Properties of Counterweights

Uncertainty Analysis on Prediction of Heat Transfer Coefficient and Pressure Drop in Heat Exchangers Due to Refrigerant Property Prediction Error

Exergy Analysis of Vapour and Sorption Cooling Processes

An Optimal Control Approach to Sensor / Actuator Placement for Optimal Control of High Performance Buildings

Noise Reduction Technology for Inverter Controlled Rotary Compressor

Three-Dimension Numerical Simulation of Discharge Flow in a Scroll Air Compressor

The scroll compressor with internal cooling system conception and CFD analysis

Effects Of Leakage Flow Model On The Thermodynamic Performance Of A Scroll Compressor

Lubrication Analysis on the Profile of Slider in Reciprocating Compressor

The Effect Of Volute Tongue And Passage Configuration On The Performance Of Centrifugal Fan

A Comparison of Thermal Deformation of Scroll Profiles inside Oil-free Scroll Vacuum Pump and Compressor via CAE/CFD Analysis

Modeling on the Performance of an Inverter Driven Scroll Compressor

Performance Investigation on Electrochemical Compressor with Ammonia

Simulation Of Compressors With The Help Of An Engineering Equation Solver

Influence of the Heat Transfer on the Pressure Field in Radial Diffusers Flows

Theoretical and Experimental Researches of Unsteady Gas Flow in the Pipeline of the Reciprocating Compressor

Heat Transfer of Condensation in Smooth Round Tube from Superheated Vapor

Numerical Prediction of the Radiated Noise of Hermetic Compressors Under the Simultaneous Presence of Different Noise Sources

Dynamic Analysis of a Rotor-Journal Bearing System of Rotary Compressor

Vibration Characteristic Analysis of Welding Point Based on the Loss Factor of Rotary Compressor

Vibro-Acoustic Modelling of Hermetic Reciprocating Compressors

Frictional Characteristics of Thrust Bearing in Scroll Compressor

Sound Reduction Of Rotary Compressor Using Topology Optimization

Thermodynamic Properties of Low-GWP Refrigerant for Centrifugal Chiller

Shape Optimization of Oldham Coupling in Scroll Compressor

A Mathematical Approach to the Forced Vibrations of the Suspended Compressor Block

The Experiment and Analysis of Drag Coefficient of the Ring Type Compressor Valve

Indirect Measurement of Random Force Spectra on Fractional Horse Power Reciprocating Compressor Shell

Analysis And Control Of Severe Vibration Of A Screw Compressor Outlet Piping System

Optimal Muffler Design

Oil Retention and Pressure Drop of R134a, R1234yf and R410A with POE 100 in Suction Lines

Use of a CFD Code in the Analysis of Heat Transfer Surfaces

Boiling Heat Transfer and Pressure Drop of R1234ze(E) inside a Small-Diameter 2.5 mm Microfin Tube

Effective Flow And Force Areas Of Discharge Valve In A Rotary Compressor

Rating Equations for Positive Displacement Compressors with Auxiliary Suction Ports

Effect of Scroll Wraps on Performances of Scroll Compressor

A Co-Rotating Scroll Compressor for Positive Displacement and Centrifugal Dual-Mode Operations

A Numerical Study of Convective Heat Transfer in the Compression Chambers of Scroll Compressors

Semi-Empirical 3D Rectangular Channel Air Flow Heat Transfer and Friction Factor Correlations

Impact Stresses in Flapper Valves - A Finite Element Analysis

Investigation of Thermal-Hydraulic Characteristics of Pillow Plate Heat Exchangers Using CFD

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Investigation into Influence of Inlet Prewhirl on Flow Field of Diagonal Impeller with Exit Guide Volute

Study on Flow Characteristics of Oil Viscosity Pump for Refrigerant Compressors

Investigation Of The Parameters Affecting Crankshaft And Rotor Interference Fit

Stress Analysis of a Compressor Vane-Spring

Using Segmented Compression Exponent to Calculate the Exhaust Temperature of the Single Stage High Pressure Ratio Air Compressor

Heat Transfer From the Evaporator Outlet to the Charge of Thermostatic Expansion Valves

Investigation of Discharge Flow Pulsation in Scroll Crompressors

Two-Phase Refrigerant Distribution in a Micro- Channel Manifold

New Design Approach for a Scroll Compressor Anti-Rotation Mechanism

The Temperature Measurement for Rotary Compressor with Oil Injection

On the Optimal Design of One-Rotor Two-Stages Rotary-Vane Compressors

Identification of Energy Path in the Interaction between Compressor and Refrigerator

Laboratory Analysis Improves Crankshaft Design

Investigation of Axial Compliance Mechanism in Scroll Compressor

Characteristics of CO2 Transcritical Expansion Process

A Thermal Elastohydrodynamic Lubricated Thrust Bearing Contact Model

Energy and Exergy Analyses of the Scroll Compressor

Simple Modeling and Modal Analysis of Reciprocating Compressor Crankshaft System

A User-Friendly Software for Computations of Vapor Compression Cycles with Pure Fluids and Zeotropic Mixtures

The Mechanical Analysis of a Scroll Compressor

Dynamics of the Swash Plate Mechanism

Condensation Heat Transfer of Pure Refrigerants in Microfin Tubes

Carbonate Oils for Unitary Air Conditioners with R-410 A

Three-Crankshaft-Driven Scroll Compressor

Future of the Refrigeration Cycle with Expander

Criteria for the Design of Pressure Transducer Adapter Systems

Acceleration of the Apex Seals in a Wankel Rotary Compressor Including Manufacturing Process Variation in Location of the Seals

Experimental and Numerical Investigation of Two- Phase Flow through Enlarging Singularity

Friction Power in Sliding Vane Type Rotary Compressors

CFD Studies of Flow in Screw and Scroll Compressors

Intensity Measurements and Radiated Noise Reduction for a Freon Compressor

Analysis of Scroll Thrust Bearing

CFD-Based Correlation Development for Air Side Performance of Wavy Fin Tube Heat Exchangers using Small Diameter Tubes

Suction Muffler Optimisation in a Reciprocating Compressor

In Tube Evaporation Heat Transfer of Refrigerant Mixtures

Geometrical and Thermodynamic Model of a Three Lobes Compressor with Simulation and Experimental Validation

A Simultaneous Solution for Transfer Matrix Acoustic Models

Nonlinear Vibration Analysis of Reed Valves

Numerical Study of Convective Heat Transfer for Flat Unglazed Transpired Solar Collectors

Visualization of Automotive Power Seat Slide Motor Noise

New Version of the Universal Modeling for Centrifugal Compressor Gas Dynamic Design

Stress and Energy Transmission by Inhomogeneous Plane Waves into Dissipative Media

Sound Radiation Of Cast Iron

Thermodynamic Calculation of a Dual Screw Compressor Based on Experimentally Measured Values Taking Supercharge into Account

Framework for functional tree simulation applied to 'golden delicious' apple trees

Investigations Of Heat Transfer And Components Efficiencies In Two-Phase Isobutane Injector

Noise and Vibration Characterization and Statistical Energy Analysis of a Scroll Compressor

A Novel Model Considered Mass and Energy Conservation for Both Liquid and Vapor in Adsorption Refrigeration System.

Fuzzy-PID Methods for Controlling Evaporator Superheat

Experimental investigation on up-flow boiling of R1234yf in aluminum multi-port extruded tubes

Acoustics of Suction Mufflers in Reciprocating Hermetic Compressors

CFD Simulation and Experimental Study on Airside Performance for MCHX

Design of Compressor Suspension Systems Using Modal Analysis

Experimental Investigation of the Use of Equivalent Sources Model in Room Acoustics Simulations

Structure Design of a Scroll Compressor Using CAE Analysis

Effect of Circumferential Edge Constraint on the Transmission Loss of Glass Fiber Materials

Transcription:

Purdue University Purdue e-pubs International High Performance Buildings Conference School of Mechanical Engineering 2016 Gradient-Based Estimation of Air Flow and Geometry Configurations in a Building Using Fluid Dynamic Adjoint Equations Runxin He Department of Electrical and Systems Engineering, Washington University in Saint Louis, United States of America, runxinhe@email.wustl.edu Humberto Gonzalez Department of Electrical and Systems Engineering, Washington University in Saint Louis, United States of America, hgonzale@wustl.edu Follow this and additional works at: http://docs.lib.purdue.edu/ihpbc He, Runxin and Gonzalez, Humberto, "Gradient-Based Estimation of Air Flow and Geometry Configurations in a Building Using Fluid Dynamic Adjoint Equations" (2016). International High Performance Buildings Conference. Paper 198. http://docs.lib.purdue.edu/ihpbc/198 This document has been made available through Purdue e-pubs, a service of the Purdue University Libraries. Please contact epubs@purdue.edu for additional information. Complete proceedings may be acquired in print and on CD-ROM directly from the Ray W. Herrick Laboratories at https://engineering.purdue.edu/ Herrick/Events/orderlit.html

R R R > [, ] R (, ) (() (, )) () (, ) = (, ), [, ] R R = (, ) (, ) = (),. () (() ) () () () () = (),, () =,

R = R () () () () = = (),, () (),. () = ( ( ) ) < () = > () = {, } = = I I () = I () = {, } R {, } R (, ) = ( ) ( ) I (), (, ) = ( ) ( ) I (), = R {, } [, ]. [, ] = R, R (, ) = = ( (, ;, ),), {,..., }, = (,),, > (, ;, ),() [, ],, =,()

{ } = (,,,,, { } = ) = (, ), (() ) [,], [,], ( ),,, (, ),, = () () L () = (,, ), [,] =, = =, ( () (, ),()) (, ) (() (, )) () (, ) =, () = (, ), (, ) (, ) () () () () () () () () =,, () =, (, ) = (, ) = [, ] (, ) = (, ) (, ) (, ) (, ) (,, ) (,, ) D, =,, D, =,, D, =,, D = = ( D, D, ).

D D (, ) = = D R, R, D,, {,..., }, > = = = =, N (, ) (,, )., (, ) = { } = = { } =.. { } =. = = = = = =. =... /. / =. =. =. =. =. =.

0.35 1.0 d 3 h 2 0.30 0.25 0.9 0.8 0.7 s 2 h 4 d 4 s 3 h 3 d 2 d 1 s 1 h 1 0.20 0.15 0.10 0.6 0.5 0.4 0.3 0.05 (B) (G) 0.2 (B) (G) =,, R, P() P( ) P() = ( ), =, (, ;,, ) [, ] {, }, (, ;,, ),, E [ (, ;,, ) ] =, (, ; E [, ], ) (, ) E [, (, ;,, )] = {,}, (, ; E [, ], ) P(),, [, ]. {, } {(,,, ), (,,, ), (,,, ), (,,, ), (,,, ), (,,, )} (, ) = = ˆ ˆ = ˆ ˆ

d 3 s 2 h 4 d 4 s 3 h 3 d 2 h 2 s 1 d 1 h 1 2.4 2.0 1.6 1.2 0.8 0.4 0.0 d 3 s 2 h 4 d 4 s 3 h 3 d 2 h 2 s 1 d 1 h 1 2.4 2.0 1.6 1.2 0.8 0.4 0.0 d 3 s 2 h 4 d 4 s 3 h 3 d 2 h 2 s 1 d 1 h 1 2.4 2.0 1.6 1.2 0.8 0.4 0.0 0.6 0.10 1.00 0.5 0.4 0.3 0.2 0.1 0.08 0.06 0.04 0.02 0.95 0.90 0.85 0.80 Maximum memory usage (GB) 10 2 10 1 Banks and Bihari s method Gradient-based method 0.0 (B) (G) 0.00 (B) (G) 0.75 (B) (G) 10 0 1 2 3 4 Number of doors nd

{, } =. (,, ) (,, ), [,] =, [,] =, [,], ( ) [,], [,], (, ) =., =, =, [,], ( ) ( ),, =,, =, =, ( ), (, ), (, ) [,] [,] (, ), (, ), [,], [,] =,, [,],, ( ),, =,, [,],, (,, ),,,

(, ) ( ) ( ) =, =, =, (, ) = [, ] (, ) = () () = (, ) (, ) =, [,],, ( ) ( ) [,],,, [,],, (, ), { } = (, ) (, ) =,, [,],,

http:// buildingsdatabook.eren.doe.gov/docs/databooks/_bedb.pdf http://www.usgbc.org/resources/better-buildings -better-policy-compilation-green-building-policy-adoptions-united-states-