Open Channel Flow - General. Hydromechanics VVR090

Similar documents
Open Channel Flow - General. Open Channel Flow

Uniform Channel Flow Basic Concepts Hydromechanics VVR090

Lecture Note for Open Channel Hydraulics

Closed duct flows are full of fluid, have no free surface within, and are driven by a pressure gradient along the duct axis.

Hydromechanics: Course Summary

UNIFORM FLOW CRITICAL FLOW GRADUALLY VARIED FLOW

Hydraulics for Urban Storm Drainage

Open Channel Flow Part 2. Ch 10 Young, notes, handouts

Closed duct flows are full of fluid, have no free surface within, and are driven by a pressure gradient along the duct axis.

Uniform Channel Flow Basic Concepts. Definition of Uniform Flow

ch-01.qxd 8/4/04 2:33 PM Page 1 Part 1 Basic Principles of Open Channel Flows

Presented by: Civil Engineering Academy

9/17/2014. Fluid Mechanics (I) Introduction. Hamid-Reza Kariminia Fall, Idle vs. Moving Car. Any change in smoke distribution?

Fluid Mechanics. Contributors of Fluid Mechanics

OPEN CHANNEL FLOW. One-dimensional - neglect vertical and lateral variations in velocity. In other words, Q v = (1) A. Figure 1. One-dimensional Flow

LECTURE 9: Open channel flow: Uniform flow, best hydraulic sections, energy principles, Froude number

1. Open Channel Hydraulics

NPTEL Quiz Hydraulics

Department of Hydro Sciences, Institute for Urban Water Management. Urban Water

We will assume straight channels with simple geometries (prismatic channels) and steady state flow (in time).

OPEN CHANNEL FLOW. Computer Applications. Numerical Methods and. Roland Jeppson. CRC Press UNIVERSITATSB'BUOTHEK TECHNISCHE. INFORMATlONSBiBUOTHEK

FE Fluids Review March 23, 2012 Steve Burian (Civil & Environmental Engineering)

CE 6403 APPLIED HYDRAULIC ENGINEERING UNIT - II GRADUALLY VARIED FLOW

Effect of Roughness on Discharge

Advanced Hydraulics Prof. Dr. Suresh A. Kartha Department of Civil Engineering Indian Institute of Technology, Guwahati

Open Channel Flow I - The Manning Equation and Uniform Flow COURSE CONTENT

Fluvial Dynamics. M. I. Bursik ublearns.buffalo.edu October 26, Home Page. Title Page. Contents. Page 1 of 18. Go Back. Full Screen. Close.

Hydraulics Part: Open Channel Flow

STEADY UNIFORM FLOW IN OPEN CHANNEL

Fluid Mechanics Prof. S.K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Dr. Muhammad Ali Shamim ; Internal 652

DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING Urban Drainage: Hydraulics. Solutions to problem sheet 2: Flows in open channels

Uniform Flow in Open Channels

REE 307 Fluid Mechanics II. Lecture 1. Sep 27, Dr./ Ahmed Mohamed Nagib Elmekawy. Zewail City for Science and Technology

The Hydraulics of Open Channel Flow: An Introduction

MECHANICAL PROPERTIES OF FLUIDS:

Analysis of Flow Resistance for Different Bed Materials with Varying Discharge Experimentally in Open Channels

V/ t = 0 p/ t = 0 ρ/ t = 0. V/ s = 0 p/ s = 0 ρ/ s = 0

28.2 Classification of Jumps

Fluid Mechanics. du dy

presented by Umut Türker Open Channel Flow

Detailed Outline, M E 320 Fluid Flow, Spring Semester 2015

Gradually Varied Flow I+II. Hydromechanics VVR090

CIE4491 Lecture. Hydraulic design

Influence of Two-line Emergent Floodplain Vegetation on A Straight Compound Channel Flow

LECTURE 2: FLUID MECHANICS

VARIED FLOW IN OPEN CHANNELS

MODELING FLUID FLOW IN OPEN CHANNEL WITH HORSESHOE CROSS SECTION

3.2 CRITICAL DEPTH IN NONRECTANGULAR CHANNELS AND OCCUR- RENCE OF CRITICAL DEPTH

Minimum Specific Energy and Critical Flow Conditions in Open Channels

Basic Fluid Mechanics

Basic Hydraulics. Rabi H. Mohtar ABE 325

Open Channel Hydraulics I - Uniform Flow

M E 320 Supplementary Material Pralav Shetty

Chapter 10 Flow in Conduits

UNIT I FLUID PROPERTIES AND STATICS

compare to Mannings equation

Dr. Nidal Hussein 7/15/2018

12d Model. Civil and Surveying Software. Version 7. Drainage Analysis Module Hydraulics. Owen Thornton BE (Mech), 12d Model Programmer

FLOW IN CONDUITS. Shear stress distribution across a pipe section. Chapter 10

A note on critical flow section in collector channels

CEE 3310 Open Channel Flow, Nov. 26,

B.E/B.Tech/M.E/M.Tech : Chemical Engineering Regulation: 2016 PG Specialisation : NA Sub. Code / Sub. Name : CH16304 FLUID MECHANICS Unit : I

Lecture 10: River Channels

Congratulations from LSTM - Erlangen

EXPERIMENTAL STUDY OF BACKWATER RISE DUE TO BRIDGE PIERS AS FLOW OBSTRUCTIONS

Chapter 14. Lecture 1 Fluid Mechanics. Dr. Armen Kocharian

University of Engineering and Technology, Taxila. Department of Civil Engineering

HEAT TRANSFER BY CONVECTION. Dr. Şaziye Balku 1

Chapter 14. Fluid Mechanics

Open Channel Hydraulics

CIVL4120/7020 Advanced open channel hydraulics and design - Tutorial (1) Unsteady open channel flows

Table of Contents. Preface... xiii

Lecture 3: Fundamentals of Fluid Flow: fluid properties and types; Boundary layer structure; unidirectional flows

Water Flow in Open Channels

CONVECTIVE HEAT TRANSFER

Chapter 10. Solids and Fluids

Hydraulics. B.E. (Civil), Year/Part: II/II. Tutorial solutions: Pipe flow. Tutorial 1

P = 2Rθ. The previous Manning formulas are used to predict V o and Q for uniform flow when the above expressions are substituted for A, P, and R h.

Fluid Mechanics Prof. T.I. Eldho Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 17 Laminar and Turbulent flows

UNIT 1 OPEN CHANNEL FLOW 2 MARK QUESTIONS AND ANSWERS

vector H. If O is the point about which moments are desired, the angular moment about O is given:

Figure 34: Coordinate system for the flow in open channels.

UNIT 1 COMPARISON OF OPEN CHANNEL FLOW WITH PIPE FLOW

CLASS SCHEDULE 2013 FALL

Engineering Fluid Mechanics

Advanced Hydraulics Prof. Dr. Suresh A. Kartha Department of Civil Engineering Indian Institute of Technology, Guwahati

Numerical Modelling and Hydraulics

ENGINEERING FLUID MECHANICS. CHAPTER 1 Properties of Fluids

FORMULA SHEET. General formulas:

Fluid Dynamics. Equation of continuity Bernoulli s Equation Bernoulli s Application Viscosity Poiseuilles law Stokes law Reynolds Number

Modelling of flow and sediment transport in rivers and freshwater deltas Peggy Zinke

Block 3 Open channel flow

VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur

Friction Factors and Drag Coefficients

1.060 Engineering Mechanics II Spring Problem Set 8

Lesson 6 Review of fundamentals: Fluid flow

FLUID MECHANICS. Dynamics of Viscous Fluid Flow in Closed Pipe: Darcy-Weisbach equation for flow in pipes. Major and minor losses in pipe lines.

Flow in Open Channel Flow Conditions

ME 305 Fluid Mechanics I. Part 8 Viscous Flow in Pipes and Ducts. Flow in Pipes and Ducts. Flow in Pipes and Ducts (cont d)

Transcription:

Open Channel Flow - General Hydromechanics VVR090 ppt by Magnus Larson; revised by Rolf L Jan 2014, Feb 2015

SYNOPSIS 1. Introduction and Applications 2. The History of Open Channel Flow 3. Flow Classification 4. Gravity Wave 5. Channel Types 6. Definitions of Channel and Flow Properties 7. Governing Equations

1. Introduction and Applications Open channel: a conduit for flow which has a free surface Free surface: interface between two fluids of different density Characteristics of open channel flow: pressure constant along water surface gravity drives the motion pressure is approximately hydrostatic flow is turbulent and unaffected by surface tension Note, dual function of free surface and the extra degree of freedom Example: Constriction. Compare closed conduit flow with open channel

Water Supply Aqueduct, Pont du Gard, France

Water Power Cross-section of power plant ITAIPU power plant (Brazil/Paraguay)

Zola dam, Aix-en-Provence Spillway, ITAIPU dam

Transportation Panama Canal

Flow Control and Measurement

Flow Phenomena Tidal bore, Hangzou, China

Flooding Yellow River, China

2. The History of Open Channel Flow Main periods of development: ancient times (river cultures) roman times (aqueducts) renaissance (first theory) 17th century (experimental techniques + theory) 18th century (rise of hydrodynamics) 19th century (split between hydraulics and hydrodynamics) 20th century (boundary layer theory)

Ancient Times Centers of early civilization around the large rivers

The Nile River The Nile Delta The nilometer on the Island of Rhoda

Indus civilization Public bath Drainage pipe

Yellow River Levee construction Sediment-laden river water

Roman aqueducts Aqua Claudia Construction of an aqueduct

Characteristics of Aqueducts

Top of aqueduct Reservoar A Roman fountain Frontinus (40-103 A.D.) Vitruvius (55 B.C. 14 A.D.)

Renaissance Leonardo da Vinci (1452-1519) Water flow When you put together the science of the motion of water, remember to include in each proposition its application and use, in order that these sciences may not be useless.

Experimental Techniques (17 th century) Galileo Galilei (1564-1642) Evangelista Torricelli (1608-1647) barometer

Rapid developments in mathematics Blaise Pascal (1623-1662) Isaac Newton (1642-1727) Gottfried Leibniz (1646-1716)

Daniel Bernoulli (1700-1782) The Rise of Hydrodynamics

Experimental Hydraulics (18 th Century) Italy: Poleni, Venturi France: Pitot, Chezy, Borda England: Smeaton Pitot tube on an airplane wing

19 th Century Developments Main efforts: collect experimental data formulate empirical relationships derive general physical principles Split into hydraulics and hydrodynamics

Hydraulics: Germany: Hagen, Weisbach France: Poiseuille, Darcy England: Manning, Froude Hydrodynamics: France: Navier, Cauchy, Poisson, Boussinesq England: Stokes, Reynolds Germany: Helmholtz, Kirchoff

Navier-Stokes Equations u v w P t x y z x x y z 2 2 2 u u u u 1 p u u u 2 2 2 u v w Q t x y z y x y z 2 2 2 v v v v 1 p v v v 2 2 2 u v w R t x y z z x y z 2 2 2 w w w w 1 p w w w 2 2 2

Increased gap between hydraulics and hydrodynamics Bridged by the introduction of boundary layer theory by Ludwig Prandtl, the father of modern fluid mechanics. Ludwig Prandtl (1875-1953)

3 Flow Classification I steady unsteady uniform non-uniform varied flow (= non-uniform): gradually varied rapidly varied

Flow Classification II

Flow Classification III Laminar, transitional, and turbulent flow Characterized by Reynolds number: Re UL L taken to be the hydraulic radius R=A/P Re < 500 laminar 500 < Re < 12,500 transitional 12,500 < Re turbulent

Flow Classification IV homogeneous stratified flow depends on the density variation subcritical supercritical flow characterized by the Froude number Fr U gl L taken to be the hydraulic depth D=A/T Fr < 1 subcritical flow Fr = 1 critical flow Fr > 1 supercritical flow

4 Gravity Wave I Celerity of gravity wave: c gl (denominator in Froude number) Movement of impermeable plate

Gravity Wave II Continuity equation: cy y yc u (coordinate system moving with velocity c) Simplifying: u c y y

Gravity Wave III Momentum equation: 1 1 2 2 2 2 y y y cy c u c Simplifying: u y g c c gy

Gravity Wave IV Interpretation: 1. Subcritical flow (Fr < 1): Velocity of flow is less than the celerity of a gravity wave. Gravity wave can propagate upstream. Upstream areas in hydraulic communication with downstream areas. 2. Supercritical flow (Fr > 1): Velocity of flow is greater than the celerity of a gravity wave. Gravity wave cannot propagate upstream. Upstream areas not in hydraulic communication with downstream areas.

5. Channel Types Natural channels: developed by natural processes (e.g., creeks, small and large rivers, estuaries) Artificial channels: channels developed by human efforts (e.g., navigation channels, power and irrigation channels, drainage ditches) Easier to treat artificial channels.

Artificial Channels 1. Prismatic (constant shape and bottom slope) 2. Canal (long channel of mild slope) 3. Flume (channel built above ground) 4. Chute and drop (channel with a steep slope) 5. Culvert (pipe flowing only partially full)

6. Definitions of Channel and Flow Properties I Depth of flow (y): vertical distance from channel section to water surface y d cos (d = depth of flow measured perpendicular to the channel bottom; = slope angle of channel bottom) Small slopes: y d

Definition of Channel and Flow Properties II Stage: elevation of the water surface relative to a datum Top width (T): width of channel section at water surface Flow area (A): cross-sectional area of the flow taken perpendicular to the flow direction Wetted perimeter (P): length of the line which is the interface between the fluid and the channel boundary

Definition of Channel and Flow Properties III Hydraulic radius (R): ratio of flow area to wetted perimeter R A P Hydraulic depth (D): ratio of flow area to top width D A T For irregular channels: integrate and use representative values for above-discussed quantities

Definition of Channel and Flow Properties IV

7. Governing Equations Flow is turbulent in situation of practical importance (Re > 12,500) => Laminar flow is not discussed. Description of turbulent flow: u = u + u v = v + v w = w + w Average in time: Average in space: u T = 1 T න 0 T u dt u = 1 A න A u da

Statistical Quantities Root-mean-square (rms) value of velocity fluctuation: rms u = 1 T න 0 T u 2 dt 1/2 Average kinetic energy (KE) of the turbulence per unit mass: KE 1 mass = 2 + + ( u' ) 2 ( v' ) 2 ( w' ) 2 ) Reynolds stresses: u v = 1 T න 0 T u v dt

Energy Equation Bernoulli equation (along a streamline): H z d cos A A 2 ua 2g Small values of : H z y 2 u 2g

Fundamental Equations Conservation of mass: Q ua Conservation of momentum: F Q( u u ) 2 1 Conservation of energy: H z y 2 u 2g

Correction of Momentum Flux True transfer of momentum: 2 u da A Transfer based on average velocity: Qu Momentum correction coefficient: A u da 2 2 Qu A u da 2 u A

Correction of Energy Flux True transfer of energy: A 1 2 3 u da Transfer based on average velocity: 1 2 Qu 2 Energy correction coefficient: A u da Qu u da 3 2 A 2 3 u A

Properties of and equal to unity for flow with uniform velocity distribution (otherwise greater than 1) is more sensititve to velocity variations than and used only for complex cross-sectional shapes (e.g., compound sections)

Boundary Layers Consider flat surface: boundary layer depends on U, ρ,, and x. Laminar boundary layer thickness (Blasius): 5x u at 0.99 Re x U Transition to turbulent boundary layer: 500,000 Re 1,000,000 x Turbulent boundary layer thickness: 0.37 x 0.2 Re x u at 0.99 U

Observations Regarding Boundary Layers I The following relationships exist: x x,,, U,,, U Boundary layers can grow within boundary layers (e.g., change in channel shape or roughness)

Observations Regarding Boundary Layers II

Observations Regarding Boundary Layers III Boundary layers classified as hydraulically smooth or rough. Hydraulically smooth: laminar sublayer cover the roughness elements Hydraulically rough: roughness elements project through the laminar sublayer ku s * 0 5 smooth ku s * 5 70 transition ku s * 70 rough

Resistance Estimate Chezy equation: u C RS u * grs ksu g 0 5 C smooth ksu g 5 70 C transition ksu g 70 C rough