Electronic Supporting Information

Similar documents
Supporting Information. for A Water-Soluble Switching on Fluorescent Chemosensor of. Selectivity to Cd 2+

Electronic Supporting Information

Fluorescent Chemosensor for Selective Detection of Ag + in an. Aqueous Medium

A dual-model and on off fluorescent Al 3+ /Cu 2+ - chemosensor and the detection of F /Al 3+ with in situ prepared Al 3+ /Cu 2+ complex

Ratiometric and intensity-based zinc sensors built on rhodol and rhodamine platforms

Electronic Supporting Information for

Zn(II) and Cd(II) based complexes for probing the enzymatic hydrolysis of Na 4 P 2 O 7 by Alkaline phosphatase in physiological condition

Electronic Supplementary Information. Selective detection of Al 3+ and citric acid with a fluorescent amphiphile

Supporting Information

A versatile electronic hole in one-electron oxidized Ni II bissalicylidene

One polymer for all: Benzotriazole Containing Donor-Acceptor Type Polymer as a Multi-Purpose Material

Electronic Supplementary Information. Jiani Wang, Lei Zhang, Qiong Qi, Shunhua Li* and Yunbao Jiang

A BODIPY-based fluorescent probe for the differential

A colorimetric and fluorescent turn-on sensor for pyrophosphate. anion based on dicyanomethylene-4h-chromene framework

Supporting Information. Selective detection of trace amount of Cu 2+ using semiconductor nanoparticles in photoelectrochemical analysis

Supporting Information. Oxygen Reduction Catalysis at a Dicobalt Center: The Relationship of Faradaic Efficiency to Overpotential

Bistriazole-p-benzoquinone and its alkali salts: electrochemical behaviour in aqueous alkaline solutions

Electronic Supplementary Material

Supporting Information

Supplementary Information

Electronic Supplementary Information (ESI)

Synthesis of Dihydroquinoline Based Merocyanines as Naked Eye and Fluorogenic sensors for Hydrazine Hydrate in Aqueous Medium

Supporting Informations for. 1,8-Naphthyridine-based molecular clips for off-on fluorescence sensing

Reactive fluorescent dye functionalized cotton fabric as a Magic Cloth for selective sensing and reversible separation of Cd 2+ in water

Supplementary Material:

A graphene oxide-based AIE biosensor with high selectivity toward bovine serum albumin

Supporting Information for the communication

Yujuan Zhou, Kecheng Jie and Feihe Huang*

Appendix A. Supplementary Information. Design, synthesis and photophysical properties of 8-hydroxyquinoline-functionalized

A Simple Fluorescein Derived Colorimetric and Fluorescent off - on Sensor For The Detection of Hypochlorite

Rational design of a ratiometric fluorescent probe with a large emission shift for the facile detection of Hg 2+

Supporting Information for. Near infrared-to-blue photon upconversion by exploiting direct. S-T absorption of a molecular sensitizer

Electronic Supplementary Information

Electronic Supplementary Information. for. A New Strategy for Highly Selective Fluorescent Sensing of F - and

Supporting information. Cooperatively Enhanced Ion Pair Binding with a Hybrid Receptor

Supporting Information. BODIPY-based Ratiometric Fluorescent Probe for Sensitive and Selective Sensing of Cyanide Ion

Red Color CPL Emission of Chiral 1,2-DACH-based Polymers via. Chiral Transfer of the Conjugated Chain Backbone Structure

Supporting Information. Self-assembled nanofibers from Leucine Derived Amphiphiles as Nanoreactors for Growth of ZnO Nanoparticles

Electronic Supplementary Information for. A Redox-Nucleophilic Dual-Reactable Probe for Highly Selective

An unexpected highly selective mononuclear zinc complex for adenosine diphosphate (ADP)

A selenium-contained aggregation-induced turn-on fluorescent probe for hydrogen peroxide

Supporting Information

2017 Reaction of cinnamic acid chloride with ammonia to cinnamic acid amide

SUPPORTING INFORMATION. A Sensitive and Selective Ratiometric Near IR Fluorescent Probe for Zinc Ions Based on Distyryl-Bodipy Fluorophore

Molecular Imaging of Labile Iron(II) Pools in Living Cells with a Turn-on Fluorescent Probe

Supporting Information for

Supporting Information (SI)

A supramolecular approach for fabrication of photo- responsive block-controllable supramolecular polymers

Novel Supercapacitor Materials Including OLED emitters

Light-Controlled Switching of a Non- Photoresponsive Molecular Shuttle

A long-lived iridium(iii) chemosensor for the real-time

Supporting Information

with EDCI (5.73 g, 30.0 mmol) for 10 min. Bromoethylamine hydrobromide (6.15

A New Solvatochromic Fluorophore for Exploring Nonpolar Environments Created by Biopolymers

Supplementary Material (ESI) for Chemical Communications This journal is (c) The Royal Society of Chemistry 2010

Supporting information

A triazine-based covalent organic polymer for efficient CO 2 adsorption

*Corresponding author. Tel.: , ; fax: ; Materials and Method 2. Preparation of GO nanosheets 3

Tuning Porosity and Activity of Microporous Polymer Network Organocatalysts by Co-Polymerisation

Electronic Supplementary Informations

Solution reduction synthesis of amine terminated carbon quantum dots

Supplementary Information

Supporting Information. Cells. Mian Wang, Yanglei Yuan, Hongmei Wang* and Zhaohai Qin*

Supporting Information. for. Angew. Chem. Int. Ed. Z Wiley-VCH 2003

AIE Active Metal-Free Chemosensing Platform for Highly Selective Turn-ON Sensing and Bioimaging of Pyrophosphate Anion

An isolated seven-coordinate Ru(IV) dimer complex with [HOHOH] bridging. ligand as an intermediate for catalytic water oxidation

O-Allylation of phenols with allylic acetates in aqueous medium using a magnetically separable catalytic system

Morphology controlled supramolecular assemblies via complexation. between (5, 10, 15, 20-tetrakisphenyl-porphine) zinc and 4, 4 -

Single Catalyst Electrocatalytic Reduction of CO 2 in Water to H 2 :CO Syngas Mixtures with Water Oxidation to O 2

Supporting Information For:

Supporting Information

Label-Free Fluorimetric Detection of Histone Using Quaternized Carbon Dot-DNA Nanobiohybrid. Electronic Supplementary Information (ESI)

Novel fluorescent matrix embedded carbon quantum dots enrouting stable gold and silver hydrosols

ph-responsive Quantum Dots (RQDs) that Combine a Fluorescent Nanoparticle with a ph-sensitive Dye

Supporting Information Reagents. Physical methods. Synthesis of ligands and nickel complexes.

Electronic Supplementary Information. For. A turn-on-and-off ph sensitive BODIPY fluorescent probe for imaging E. coli cells

Fig. S1 The Structure of RuCE(Left) and RuCA (Right)

A ratiometric luminescent sensing of Ag + ion via in situ formation of coordination polymers

Carbon powder modification. Preparation of NS1, NS2, NS3 and NS4.

Prabhat Gautam, Bhausaheb Dhokale, Shaikh M. Mobin and Rajneesh Misra*

Experimental Section

Enantioselectivity switch in copper-catalyzed conjugate addition. reaction under influence of a chiral N-heterocyclic carbene-silver complex

Controlling microenvironments and modifying anion binding. selectivities using core functionalised hyperbranched polymers

Nickel Phosphine Catalysts with Pendant Amines. for the Electrocatalytic Oxidation of Alcohols

Dicyclen-TPE zinc complex as a novel fluorescent ensemble for nanomolar pyrophosphate sensing in 100% aqueous solution

Supporting Information. Rhodium, iridium and nickel complexes with a. 1,3,5-triphenylbenzene tris-mic ligand. Study of

Electronic Supplementary Information. Facile synthesis of polypyrrole coated copper nanowire: new concept to engineered core-shell structures

Supporting Information

Multifunctional silica nanoparticles modified via silylateddecaborate

Supporting Information for Polybenzimidazolium Salts: A New Class of. Anion-Conducting Polymer

Supporting Information

Supporting Information. Identification and synthesis of impurities formed during sertindole

Super-Resolution Monitoring of Mitochondrial Dynamics upon. Time-Gated Photo-Triggered Release of Nitric Oxide

Supplementary Material (ESI) for Chemical Communications This journal is (c) The Royal Society of Chemistry 2008

Stimulating Electrocatalytic Oxygen Reduction Activity on Nitrogen doped Graphene through Noncovalent Molecular Functionalisation

2,5-bis(4-alkoxycarbonylphenyl)-1,4-diaryl-1,4-dihydropyrrolo[3,2- b]pyrrole (AAPP) AIEgens: tunable RIR and TICT characteristics

Electronic Supplementary Information

A BODIPY aldoxime-based chemodosimeter for highly selective and rapid detection of hypochlorous acid

Supporting Information

Supporting Information

Transcription:

Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2015 Electronic Supporting Information A fast and selective probe for detection of CN - and F - in water along with sequential molecular logic circuit via resettable optical readout Alok Kumar Singh* Department of Chemistry, University of Delhi, Delhi-110 007, India. *E-mail: aloksinghchemistry@gmail.com 1

Material and Methods: The majority of salts for sensing experiment were purchased from BDH chemicals Ltd, Sigma Adrich and used as received. 2-Acetyl pyridine, pyridine-4- carboxaldehyde, FeCl 2 and NH 4 PF 6 were purchased from Sigma-Aldrich and used as received. Ethanol and acetonitrile (HPLC grade) were purchased from Merck and distilled using reported methods. S1 Deuterated solvents were purchased from Sigma Aldrich and stored under freezer. Water used for the experiment was double distilled. UV-vis spectra were recorded using an analytikjena SPECORD 250 with a quartz cuvette (path length = 1 cm, volume = 3 ml). Fluorescence spectroscopy experiments were performed on Varian Cary eclipse fluorescence instrument (slit width, 5 nm) with a quartz cuvette (path length, 1 cm). IR spectra were recorded on Perkin-Elmer FT-IR spectrophotometer in range 400-4000 cm -1 using KBr as a medium. All 1 H-NMR spectra were recorded on Jeol JNMECX 400p spectrometer at room temperature using DMSO-d 6. All chemical shifts (δ) were recorded in ppm with reference to TMS and coupling constant (J) in Hz. The ph of the solution was fixed with EUTECH Instruments ph 510, calibrated with buffer solution of ph 4.00 and 9.00 before each measurement. The ph of test solution was adjusted with ~10-3 M HCl and NaOH solution in H 2 O. The optical probe 1 was synthesised following only some alteration in the reported synthetic method (Scheme 1). S2 The ligand 4 -pyridyl-2,2 :6,2 -terpyridine (pytpy) was prepared according to a reported procedure resulting in needle shaped white crystals. S3 Scheme 1: Synthetic scheme for the preparation of probe 1. 2

Synthesis of optical probe (1). The ligand 4 -pyridyl-2,2 :6,2 -terpyridine (pytpy) (156.7 mg, 0.50 mmol) was dissolved in 25 ml of hot ethanol and then FeCl 2 (32.1 mg, 0.25 mmol) in 10 ml ethanol was added dropwise with constant stirring under a N 2 atmosphere. The reaction-mixture was refluxed with stirring for 4 h. After cooling to room temperature, the reaction-mixture was filtered, subsequently, 1 was precipitated out by the addition of saturated ethanolic solution of NH 4 PF 6 and collected by vacuum filtration. The residue was washed with an ample amount of water followed by diethyl ether, dried under vacuum and recrystallized using a mixture of acetonitrile and water resulting in a purple colour microcrystalline solid. Yield: 148.7 mg (61%). 1 H-NMR (400 MHz, DMSO-d 6 ): (ppm) = 9.78 (s, 4H, H 3 ), 9.05 (m, 8H, H m+3 ), 8.53 (d, J = 6.3 Hz, 4H, H o ), 8.06 (t, J = 8.1 Hz, 4H, H 4 ), 7.28 (d, J = 5.9 Hz, 4H, H 6 ), 7.19 (t, J = 6.9 Hz, 4H, H 5 ); 13 C-NMR (400 MHz, DMSOd 6, ): 160.25, 157.64, 152.90, 151.05, 146.24, 143.16, 138.96 127.75, 124.30, 121.74, 121.30; IR (KBr): ʋ (cm -1 ) = 558 (m), 836 (vs), 1408 (m), 1598 (m); TOF-MS (m/z, calculated for C 40 H 28 F 12 N 8 P 2 Fe): 821 [M-PF 6 ] +, 338 [M-2PF 6 ] 2+ ; UV-vis (10-5 M, CH 3 CN): λ = 569 nm (ε = 22,931 M -1 cm -1 ); CV (vs. Ag/AgCl): E 1/2 = 1.24 V (Fe 2+/3+ ), ΔE = 70 mv at 300 mvs -1. Figure S1: 1 H-NMR spectrum of 1 in DMSO-d 6 at room temperature. 3

Figure S2: FTIR spectrum of 1 in KBr medium. 4

Figure S3: TOF-MS spectrum of 1. Figure S4: UV-vis spectrum of 1 (10-5 M, CH 3 CN) at room temperature. 5

Figure S5: (a) Cyclic voltammogram of 1 (1 10-3 M) in CH 3 CN containing 0.1 M Bu 4 NPF 6 at scan rates ranging from 100 to 1000 mv. The glassy carbon was used as the working electrode, platinum wire as counter electrode and aqueous Ag/AgCl as reference electrode. (b) Plot of current density as a function of square root of scan rate (R 2 = 0.99). Preparation of ppm-level solutions. A stock solution of 1000 ppm of various salts of KCN, KF, KNO 3, KNO 2, KSCN, K 2 SO 4, NH 4 PF 6, NaClO 4, KHCO 3, NaOAc, KI, KBr, KCl, K 2 CO 3, AgNO 3, FeCl 3, LiNO 3, NiCl 2.6H 2 O, MnCl 2.4H 2 O, CuCl 2.2H 2 O, CoCl 2.6H 2 O, Pb(NO 3 ) 2, FeSO 4.7H 2 O and Hg(NO 3 ) 2.H 2 O were made by dissolving 10 mg of each salts in 10 ml of suitable solvents, water for aqueous medium and mixture of dry solvents i.e., acetonitrile/ethanol/dmso for non-aqueous medium. Furthermore, the stock solution was diluted to 1 ppm by taking 5µl volume of stock solution (1000 ppm) and making up it in solution of 1 upto 5 ml. The solution was used for analyses. For proof-of-concept experiments, pool and tap water samples were collected and filtered before preparing stock solution (1000 ppm) of CN - /F -. Detection procedure of ppm-levels of CN - and F - : A 5 ml solution of 1 (10-5 M, CH 3 CN) was treated with 5µl stock solution (1000 ppm) of CN - /F - (1.0 ppm in acetonitrile solution of 1), mixed well within seconds. The resulting solution was used for recording absorbance and emission spectra at room temperature. The similar methodology was executed for higher concentrations of CN - and F -. 6

Figure S6: Visual colour changes in the solution of 1 (10-5 M, CH 3 CN) on addition of 1-10 ppm of CN - in H 2 O. Figure S7: Visual colour changes in the solution of 1 (10-5 M, CH 3 CN) on addition of 2-15 ppm of F - in H 2 O. Figure S8: Job s plot for varying mole-fraction of CN - in 1 (10-5 M, CH 3 CN) at = 569 nm. 7

Figure S9: Job s plot for varying mole-fraction of F - in 1 (10-5 M, CH 3 CN) at = 569 nm. Figure S10: Benesi-Hildebrand plot showing reciprocal of change in absorption of 1 vs. reciprocal of concentration of CN - (R 2 = 0.99) at = 569 nm. Figure S11: Benesi-Hildebrand plot showing reciprocal of change in absorption of 1 vs. reciprocal of concentration of F - (R 2 = 0.98) at = 569 nm. 8

Figure S12: (a) Change in absorbance of 1 (10-5 M, CH 3 CN) at = 569 nm upon addition of 1, 5 and 10 ppm of CN - in H 2 O; (b) Representative plot between ln[a] vs. time (R 2 = 0.97). Figure S13: (a) Change in absorbance of 1 (10-5 M, CH 3 CN) at = 569 nm upon addition of 5, 10 and 15 ppm of F - in H 2 O; (b) Representative plot between ln[a] vs. time (R 2 = 0.99). 9

Figure S14: Visual colour changes in the solution of 1 (10-5 M, CH 3 CN) on addition of 15 ppm of different anions in H 2 O. Figure S15: Proof-of-concept experiments with probe 1 (at = 569 nm) for determining (a) CN - in pool (blue balls, R 2 = 0.97) and tap water (blue triangles, R 2 = 0.98); (b) F - in pool (gray balls, R 2 = 0.97) and tap water (gray triangles, R 2 = 0.96) solutions. 10

Figure S16: 1 H-NMR spectra of 1, 1-CN - and 1-F - in DMSO-d 6 at room temperature. Figure S17: 13 C-NMR spectra of 1 and 1-CN - in DMSO-d 6 at room temperature; 13 C-NMR of 1-CN - (400 MHz, ): 159.35, 157.26, 156.27, 155.39, 150.57, 144.31, 138.39, 134.34, 124.96, 121.64, 121.20, 116.97. 11

Figure S18: FTIR spectra of 1, 1-CN - and 1-F - in KBr medium. Figure S19: Absorbance outputs of 1 at = 569 nm in the presence of chemical inputs viz. IN1 (CN - ) and IN2 (F - ) and the corresponding two input combinatorial logic circuit. The purple and blue bars depict OUT1 ( = 569 nm) and OUT2 ( = 413 nm) respectively. Dotted lines represent the threshold level of absorbance outputs. Threshold level = 0.10 for OUT1 and 0.03 for OUT2. The output above the threshold level is read as 1 otherwise 0. 12

Figure S20: A molecular keypad lock with absorbance output at = 569 nm (Threshold level = 0.10). Only when the correct password *8 (* = CN -, 8 = Ag + ) or #9 (# = F -, 9 = Fe 2+ ) is entered absorbance channel is turned on. The table shows the outputs in the absorbance channel and the overall output in response to the different input combinations (* = CN -, # = F -, 0 = Cu 2+, 1 = Co 2+, 2 = Fe 3+, 3 = Li +, 4 = Hg 2+, 5 = Pb 2+, 6 = Ni 2+, 7 = Mn 2+, 8= Ag +, 9 = Fe 2+. References: S1. D. D. Perrin and W. L. F. Armarego, Purification of Laboratory Chemicals, 3. Aufl., Oxford. Pergamon Press, 1988. S2. T. Duchanois, T. Etienne, M. Beley, X. Assfeld, E. A. Perpète, A. Monari and P. C. Gros, Eur. J. Inorg. Chem., 2014, 3747. S3. E. C. Constable and A. M. W. C. Thompson, J. Chem. Soc. Dalton. Trans., 1992, 2947. 13