Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 1 17. AMERICAN POWER CONVERSION HOLDING INC.,TAIWAN BRANCH. 3F.,NO. 205, SEC.3, BEIXIN RD., 231 XINDIAN DIST., NEW TAIPEI CITY, 231 TAIWAN. Name :. Mobile Power Pack. SGS Job No. : Internal Reference No. :. CP14-018463 - GZ. 2.2. Tested Basic Model No. (P.O. No.) :. M5WH. Client Ref. Info. :. According to declaration from client, the materials in model M5xxyyy are the same as those in model M5WH.. Date Received :.. Verification Period :. - 05 May 2014. Verification Requested :. With reference to RoHS Directive 2011/65/EU recasting 2002/95/EC.. Verification Method :. Please refer to next page(s).. Verification Result :. Please refer to next page(s).. Verification :. Based on the verification results the submitted samples, the results Cadmium, Lead, Mercury, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) comply with the limits as set by RoHS Directive 2011/65/EU recasting 2002/95/EC.. The test results are related only to the tested items. The report shall not be reproduced except in full without the written approval the testing laboratory.. Note :. Signed for and on behalf SGS-CSTC Ltd.. Approved Signatory.
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 2 17. Verification Method :. 1. With reference to IEC 62321-2:2013, review was performed for the samples disjointed from the submitted articles. 2. With reference to IEC 62321-1:2013, tests were performed for the samples indicated by the photos in the report. (1) With reference to IEC 62321-3-1: 2013, screening by Spectroscopy (2) Test Method: a. With reference to IEC 62321-5:2013, determination Cadmium by ICP-OES. b. With reference to IEC 62321-5:2013, determination Lead by ICP-OES. c. With reference to IEC 62321-4:2013, determination Mercury by ICP-OES. d. With reference to IEC 62321:2008, determination Hexavalent Chromium by spot test / Colorimetric Method using UV-Vis. e. With reference to IEC 62321:2008, determination PBBs and PBDEs by GC-MS..
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 3 17. In accordance with the result material risk assessment, the following disjointed parts in the submitted sample have been verified.. Part Part Description. BOM 1. White plastic shell. 2. White plastic cover w/ brown printing (on No.1). 3. Green plastic button (on No.1). 4. Black adhesive sponge sheet (in No.1). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply...
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 4 17. Part Part Description. BOM 5. Black double-side adhesive sponge sheet (in No.1). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply... 6. Black plastic w/ white printing (heat shrinkable) (in No.1). 7. Blue PCB (small) (in No.1). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply... 8. Blue PCB (big) (in No.1). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply...
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 5 17. Part Part Description. BOM 9. Black block (in No.6). 10. Silvery metal sheet (connected w/ No.7). 11. Black body w/ brown printing (U1 on No.7). 12. Black body w/ brown printing (Q7 on No.7).
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 6 17. Part Part Description. BOM 13. Silvery metal solder (on No.7). 14. Red plastic (wire insulation) (connected w/ No.8). 15. Black body w/ brown printing (Q1 on No.8). 16. Black body w/ brown printing (D2 on No.8). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply...
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 7 17. Part Part Description. BOM 17. Silvery metal solder (on No.8). 18. Black body w/ brown printing (U3 on No.8). 19. White plastic shell (SW1 on No.8). 20. Silvery metal shell (J3 on No.8).
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 8 17. Part Part Description. BOM 21. Brown transparent adhesive plastic sheet (on No.20). 22. Black plastic w/ white printing (outer shell) (on No.20). 23. Silver-white metal shell (J1 on No.20). 24. Black body w/ letters (Q10 on No.8). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply...
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 9 17. Part Part Description. BOM 25. Black body w/ letters (D6 on No.8). 26. Black body w/ letters (Q9 on No.8). 27. Black body w/ letters (U4 on No.8). 28. Black plastic (wire insulation) (connected w/ No.8). PBBs. IN.. ND.. Comply... PBDEs. IN.. ND.. Comply...
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 10 17. Part Part Description. BOM 29. Black body w/ letters (U2 on No.8). 30. Silvery metal pin (in No.19). 31. Silvery metal sheet (on No.30). 32. Black plastic button (on No.31). Cr(VI). IN.. Negative.. Comply...
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 11 17. Part Part Description. BOM 33. Silvery metal sheet (on No.19). 34. Black plastic part (in No.20). 35. Golden/ silvery metal pin (on No.34). 36. Black plastic part (in No.23).
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 12 17. Part Part Description. BOM 37. Golden metal pin (on No.36). 38. Silvery metal sheet (on No.7).
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 13 17. Remark : (1) (a) There are the results on total Br while test items on restricted substances are PBBs and PBDEs. There is the result on total Cr while test item on restricted substances is Cr(VI). (b) are obtained by for primary screening, and further chemical testing by ICP-OES (for Cd, Pb, Hg), UV-Vis (for Cr(VI)) and GC-MS (for PBBs, PBDEs) is recommended to be performed, if the concentration exceeds the below warning value according to IEC62321-3-1:2013 (unit: mg/kg). Element Polymer Metal Cd BL (70-3σ)< X <(130+3σ) OL BL (70-3σ)< X <(130+3σ) OL Pb BL (700-3σ)< X<(1300+3σ) OL BL (700-3σ)< X <(1300+3σ) OL Composite Materials LOD < X <(150+3σ) OL BL (500-3σ)< X<(1500+3σ) OL Hg BL (700-3σ)< X <(1300+3σ) OL BL (700-3σ)< X <(1300+3σ) OL BL (500-3σ)< X <(1500+3σ) OL Br BL (300-3σ)< X -- BL (250-3σ)< X Cr BL (700-3σ)< X BL (700-3σ)< X BL (500-3σ)< X (c) BL = Below Limit, OL = Over Limit, IN = Inconclusive, LOD = Limit Detection, -- = Not regulated. (d) The XRF screening test for RoHS elements - The reading may be different to the actual content in the sample be non-uniformity composition. (2) (a) mg/kg = 0.0001%, MDL = Method detection Limit, ND = Not Detected (<MDL), --- = Not conducted, - = Without BOM. (b) Unit and MDL in wet chemical test Test Item Pb Cd Hg Unit mg/kg mg/kg mg/kg MDL 10 10 10 The MDL for single compound PBBs and PBDEs is 100 mg/kg, MDL Cr(VI) for polymer and composite sample is 10 mg/kg. (c) According to IEC 62321:2008, result on Cr(VI) for metal sample is shown as Positive/Negative. Negative = Absence Cr(VI) coating, Positive = Presence Cr(VI) coating.
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 14 17. photo:. CANEC1405274901 CANEC1405274901
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 15 17. CANEC1405274901 CANEC1405274901
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 16 17. CANEC1405274901 CANEC1405274901
Verification Report. No. CANEC1405274901 Date: 05 May 2014. Page 17 17. CANEC1405274901 CANEC1405274901 SGS authenticate the photo on original report only. *** End Report ***.