中誉重工 ZHONGYU HEAVY IND Production Introduction Drilling Rig Nikko Lee 2014.01.06
中誉重 ZHONGYU HEAVY IND 工 Drilling Rig Introduction 钻机知识 Part One Drilling Rig Basic Knowledge Part Two Water Well & Coring Drilling Rig
Drilling Rig Types Basic Knowledge Drilling rigs are professional machines. They could be divided into many types according to different rules. 1.Drilling method: Rotary rig(with mud pump), DTH rig (with air compressor) and combined(with mud pump and air compressor). 2.Drilling depth capacity: Surface sampling rig(2-50m), Shallow rig(50-300m), Middle-deep hole rig(300-600m), Deep hole rig(600-6000m), Super-deep hole rig(6000-15000m) etc. 3.Usage: Rock core sampling rig, oil rig, water well rig, mining rig, construction rig etc. 4.Operation site: Above-ground rig, gallery rig, submarine rig etc. Our DLX series drilling rigs: Designed for rock core sampling & water well drilling above ground, usually only work with mud pump, but could also be used with air compressor. Largest working depth is about 2200m.
Drilling Rig Main Items DLX Series Rigs Main Usage:Core sampling and water well drilling Other usage:shallow piling drilling
Drilling Rig Parameters DLX Series Rigs Parameters DLX-130 DLX-200 DLX-3 DLX-4 DLX-8 Max Depth 130m 200m 600m 1400m 2200m Max Diameter 300mm 300mm 400mm 500mm 500mm Main Items Lifting Capacity 1600kg 2400kg 4000kg 45KN 60KN Mud Pump 95/160 L/min 145/160 L/min 160/200/250 L/min 200/250/320 L/min 250/320/850 L/min Drill Rod 50mm 50,60mm 60,73,89mm 60,73,89mm 60,73,89mm Power 18HP 20HP 50HP 136HP 240HP Diesel Engine ZCS1105B ZS1110 4DW91-45 YC4E135-21 YC6A240-20 Electric Motor (Optional) 15HP 20HP 30HP 50HP ----
Drilling Rig Working Method DLX Series Rigs 1.Drilling Power: Weight of drill rods, vertical shaft pressure and rotary of bits. 2.Mud goes down to hole bottom from empty drill rods then goes out with rock fragment from gap between rod and well wall. 3.Drilling through rock layers 1>Water well drilling: Triturating rocks directly with Three-wing PDC bits or tricone bit. 2>Rock core sampling: Cutting down cylindrical core sample by alloy bit or diamand bit then the sample left in core barrel and be took out.
Drilling Rig Water Well Tools DLX Series Rigs Drilling Bits: 1.Three-wing alloy bit: For sand layers drilling,could be produced at any size 2.Three-wing PDC bit: For rock layers drilling.chinese standard. 3.Tricone bit: For rock layers drilling.world standard.
Drilling Rig Coring Tools DLX Series Rigs 1.Drilling Bit: Three-wing alloy bit,alloy bit,diamand bit 2.Core barrel: Collecting rock sample 3.Sediment barrel: Taking out rock sediment
Drilling Rig Drilling equipment DLX Series Rigs Tower Drive pipe Bits
Drilling Rig Drilling Tools DLX Series Rigs Drilling Tower 1.DLX-130Y,DLX- 200Y: 6m 2.DLX-3YQ: 6.5m (hydraulic type) 3.DLX-4,DLX-8: Higher than 15m 4.Produced as needed.
Drilling Rig Drilling Tools DLX Series Rigs Drive Pipe: 1.Parameter: 4.3m,59*53mm, out hexagonal designed, connected with drill rod by connector. Usage: With power of gyrator makes rods rotate and drilling down.
Drilling Rig Drilling Tools DLX Series Rigs Drilling Rod:Dia 50mm and 60mm are usually used, length is 4m.Matched rod connector is dia 65mm and 80mm.If required drilling depth and diameter is large, then dia 73mm and 89mm would be used.
Drilling Rig Wire-line tools DLX Series Rigs Wire-line tools is of world standard.type for drill rod is AQ,BQ,NQ,HQ and matched casing is AW,BW,NW,HW.Others parts like bits,winch would be specially recommended.
Drilling Rig Wire-line tools DLX Series Rigs Winch Wire-line Tools Tower Drive pipe
Drilling Rig Water well drilling DLX Series Rigs Water Well Operation Site
Drilling Rig Core Sampling DLX Series Rigs Coring Operation Site
Drilling Rig Mud Pump DLX Series Rigs Mud Pump Mud Pool Mud Pump
Drilling Rig Mud Pump DLX Series Rigs Mud Pump Item BW95 BW145 BW160 BW200 BW250 BW320 BW850
Drilling Rig Design DLX Series Rigs Hydraulic chuck: It is designed to save the trouble from ball chuck. Slide: It is designed to move the machine backward or forward when you need to lift/change the drill rod or adjust the drilling position. Trailer: 2-wheel, 4-wheel, 6-wheel. It is designed to move the drilling rig with tractor or such pulling device.
Drilling Rig Design DLX Series Rigs Truck mounted: Easy to move and operate, they are also with hydraulic systems. Crawler: Self-propelled, able to clime, suitable for complex terrain. Hydraulic system: Tower and support. It is designed to decrease labor cost, two men are more than enough to operate the drilling rig with hydraulic system.
Drilling Rig Design DLX Series Rigs Digital control: Multiple data display, easy controlling and monitoring, very convenient and efficient for geological study.
Drilling Rig Producing Tools DLX Series Rigs Except special requirement, all our items are in stock.
Drilling Rig Storage DLX Series Rigs We have more than 50 sets of processing equipment to ensure the quality of our product, which now proved worthy by our client s recognition. And these equipments ensure large production capacity and adequate stock, we have all the small models in stock all year long and the bigger ones ready within 15-30 days.
Drilling Rig Delievery DLX Series Rigs To protect drilling rigs during sea transportation, we give them proper packing. DLX-130Y, DLX-200Y, DLX-3Y: Wooden case DLX-3, DLX-3YC, DLX-4, DLX-8: Plastic woven bag Spare parts: Wooden case or plastic woven bag DLX-200T, DLX-3YT: Nude, main machine in plastic woven bag.
钻机知识 Service DLX Series Rigs We have a technical team with 16 engineers developing products and providing after sales service, 4 of which are senior engineers, over half of them have the experience of oversea guidance of installation, operation and training,. We also have a sales team with 12 well trained salesperson to guide you for the model choosing, contract making, transportation and after sales service.
Drilling Rig Guarantee DLX Series Rigs Our products has been proved by TUV, rewarded ISO9001:2008. We guarantee the quality of the machines (excluding the wearing parts) for one year from the trial run finish, but not exceed 15 months from the date on which machines leaves the factory.