Volcanic Hot Spots and Continental Drift

Similar documents
OS 1 The Oceans Fall 2007

Introduction. Learning Outcomes. Exercise 1 Plates and Plate Boundaries. GEO 101 The Solid Earth Week 2 Plate Tectonics Lab (25 points)

GEOLOGY 101 LABORATORY LAB

MiSP Plate Tectonics Worksheet #2 L3

Laboratory #1: Plate Tectonics

PSc 201 Chapter 3 Homework. Critical Thinking Questions

The map below shows the locations of earthquakes and volcanoes

Finding Fault with Food or Modeling Plate Movement

1 Volcanoes and Plate Tectonics

Student Name: Campus: Grade: GEOLOGY 101 LABORATORY LAB Isostasy and Plate Tectonics Understanding and Analyzing Vertical and Horizontal Plate Motion

Snack Tectonics or Modeling Plate Movement

Plate Tectonics and the cycling of Earth materials

Plate Tectonics. Continental Drift Sea Floor Spreading Plate Boundaries

Ch 9.1 Notes. Objective: Be able to explain the theory of plate tectonics and be able to explain evidence that supports it.

Evidence for Plate Tectonics How do we know that the plates move?

Kind of plate boundary (convergent or divergent?)

TO GO TO ANY OF THE PAGES LISTED BELOW, CLICK ON ITS TITLE

GEOLOGY 101 LABORATORY LAB

Sea-Floor Spreading. Use Target Reading Skills. Mid-Ocean Ridges. What Is Sea-Floor Spreading?

MiSP Plate Tectonics Worksheet #1 L1

Seafloor Spreading and Paleomagnetism Activity

8.1b EARTHQUAKES REVIEW

WARNING! Only for use by children over 10. WARNING Science Education Set. This set contains chemicals

Materials needed: ISNs (students & teacher), document camera, self-reflection pages, corrected tests

4 Deforming the Earth s Crust

LAB 7. Lab 7. Formation of Geologic Features: How Can We Explain the Growth of the Hawaiian Archipelago Over the Past 100 Million Years?

Geological Hot Spots. Name: Why do we believe that plates move? Observation: the Ring of Fire. Inference: What is a hot spot?

Geology 101 Study Guide #4

Name Hour. Environmental Science Semester 2 Study Guide. Plate Tectonics. 1. Explain sea floor spreading.

Geology 101 Lab Worksheet: Geologic Time

Unit: 4 Plate Tectonics LT 4.1 Earth s Interior: I can draw and interpret models of the interior of the earth.

Section 3 Deforming Earth s Crust

PLATE TECTONICS NOTES

Grade Six: Plate Tectonics 6.11 Density of Granite and Basalt. Density of basalt and granite affect the formation of landmasses on Earth.

Directed Reading. Section: Volcanic Eruptions. light in color is called a. felsic. b. oceanic. c. mantle. d. mafic. dark in color is called

Geology of the Hawaiian Islands

4 Deforming the Earth s Crust

Study Guide: Unit 3. Density and Pressure: You should be able to answer the types of questions given in the end of module questions.

Investigating Seafloor Spreading

Chapter 4: Plate Tectonics

The map below shows the locations of earthquakes and volcanoes

1. Name at least one place that the mid-atlantic Ridge is exposed above sea level.

Earth Science Volcanoes

Section 3. What Drives the Plates? What Do You See? Think About It. Investigate. Learning Outcomes

GEOLOGY 101 LABORATORY LAB #2 Isostacy and Plate Tectonics How Density and Gravity Control Plate Dynamics

Hot Spots and Plate Movement exercise

Sea Floor Spreading Lab ES2 # 2!

The locations of volcanoes are mostly determined by plate tectonics. convergent: tending to move toward one point or to approach each other

Geologic Time Scale and Crookston Geologic History

Chapter 1 Section 2. Land, Water, and Climate

Unit 4 Lesson 7 Mountain Building

1. In the block diagram shown here, which is the oldest rock unit?

What is Crater Number Density?

If we plot the position of a moving object at increasing time intervals, we get a position time graph. This is sometimes called a distance time graph.

Red Hot Half-Life Modeling Nuclear Decay

Plate Tectonics. These icons indicate that teacher s notes or useful web addresses are available in the Notes Page.

11. Moving Plates 11/28/2016

Task Booklet 2008 Grade 8

GEOSCIENCE 105 THE DYNAMIC EARTH FIRST ONE-HOUR EXAMINATION. Tuesday, October 20, 1998 NAME STUDENT #

2. Explain why there are these two predominate elevations. (Hint: think about isostasy and the type of materials we used to demonstrate buoyancy).

Week: 4 5 Dates: 9/2 9/12 Unit: Plate Tectonics

The ACTIVE EARTH!!!!!

Forces that Shape the Land. Plate Tectonics

CONTINENTAL DRIFT THEORY

Welcome to GCSE Geography. Where will it take us today?

Slow and Steady By ReadWorks

TECTONIC PLATES. reflect

Determining the relationship between the summit and Pu u Ō ō on Kilauea

Geology/Plate Tectonics Activities - Canizares

Earth Science Ch. 5.1 Ch. 5 Vocabulary List Lesson 1: Earth s Moving Plates

September 14, SWBAT explain how divergent boundaries shape Earth s surface.

6.E E Rock Cycle/Weathering/Soil

1. I can describe evidence for continental drift theory (e.g., fossil evidence, mountain belts, paleoglaciation)

Unit 4 Lesson 3 Mountain Building. Copyright Houghton Mifflin Harcourt Publishing Company

Plate Tectonics Investigation

Step 2: Discover the relationship between heat flow and plate boundaries.

Geology of the Hawaiian Islands

Lab 13: Patterns of Crustal Activity

Student Packet session # 11 Name: Date:

8 th Grade Science Plate Tectonics and Topography Review

Suggested volcano pattern in relation to the earthquake pattern and topography Learning Segment 7.1

Week: Dates: 10/19 10/30 Unit: Volcanos

Volcanoes. Table of Contents Volcanoes and Plate Tectonics Volcanic Eruptions Volcanic Landforms

Lesson Learning Goal

What Forces Drive Plate Tectonics?

Geology 101 Reading Guide for Plate Tectonics

Lab Report: Plate Tectonics Data: Submit the Convergent Plate Boundary Data Page. (6 points)

LAB: PLATE TECTONICS GOAL: Calculate rates of plate movement

UNIT 1: EARTH FORCES EARTH FORCES. If you think this planet we live on is a safe, solid lump of rock it s time to think again!

Activity - Using GPS Data and Geologic Markers to Track Plate Motion

You be the Judge: Density

Student Instruction Sheet: Unit 2, Lesson 2. Equations of Lines, Part 2

Refer to the map on page 173 to answer the following questions.

Science 2015 Earth Science. Study Guide

Lesson 1 Handout. A volcano discovery Web Quest

Plate Tectonics Practice Test

Caution! Stick-slip motion should not be confused with strike-slip motions along lateral faults.

Graded Assignment SCI113A: Earth Science Unit 2 Lesson 9: Discuss: Island Chain Formation

Earth s Structure and Surface

Benioff Box. Original Source: Dr. Leslie Sautter, Department of Geology, College of Charleston

Transcription:

TEACHERS RESOURCE MEOW Geology Volcanic Hot Spots and Continental Drift Start by showing a model of how the tectonic plate moves above a hot spot, resulting in the formation of an island chain. 1. Have the students make a prediction about how far the tectonic plate they are currently standing on moves in a year. (Answer: Approximately 10cm per year.) 2. Direct students to the map. The map shows degrees longitude on the x-axis imagine lines running upwards at 150, 160, 170 etc. The lines of longitude are written on the y-axis imagine horizontal lines running along at 20, 30 and so on. The Hawaiian chain of islands in the Pacific Ocean is shown on the map. The names of each island in the chain are written on the map. The active volcano Kiluaea is located on the island known as the Big Island of Hawaii at the bottom at around 155 longitude. Here s an interesting side point. The Big Island of Hawaii is at about latitude 19 above the equator and Townsville is at about latitude 19 below the equator. The red scale is set so that 3cm = 1000km. 3. Look at the scale shown on this map. This is a scale you can use to match up with your ruler measurements to work out actual distances between the islands. The map should be scaled so that 3cm is 1000km. So if the distance you measure between two islands using a ruler is 6 cm how far apart are they really? They will be 2000 km. 4. Ask students to measure the actual distance between Hawaii and Kauai Islands (519 km). Ask students to measure the actual distance between Hawaii and Laysan Islands (1818 km). Direct students to Table 1 which shows the age of the rock on each island in millions of years, abbreviated to My, and the distance each island is from the Big Island of Hawaii. Have them fill in the missing values they measured. 5. Ask students to get out highlighter pen. Which island is the oldest highlight it on the map. Which is the youngest highlight it on the map. Is this its true age? Of course not, but we use that as the starting point on the time line and give it an age of zero My so all the other islands ages are in comparison to that one. 6. Split students into two groups, and have them plot the points appropriate to their group (slope 1 vs slope 2).

7. Ask students to use the information in the table and the graph paper provided to plot Age of island versus distance of each island. 8. Ask students to inspect the scatterplot. Are there any trends? Could you make straight lines out of any of the points? Assist students to draw the line of best fit: The line of best fit is drawn so that the points are evenly distributed on either side of the line. There are various methods for drawing this 'precisely', but you will only be expected to draw the line 'by eye'. When drawing the line of best fit, use a transparent ruler so you can see how the line fits between all the points before you draw it. You may be asked to comment on the nature of the relationship between the two variables. This means you will be expected to say whether there is positive, negative or no relationship. Using terms such as 'strong', 'moderate' or 'weak' will give a clearer indication of the strength of the relationship. For example if it is clear that y increases as x increases. Then we can say that, the relationship between the variables is positive. If most of the points sit very close to the line we can say that the association between the two variables is strong. On the other hand if the points are a long way from the line then the relationship is not very strong. And if it looks like a blob rather than points along a straight line then we can say that there is not much of an association between the two variables. 9. Assist students in working out the slope of the line they have drawn: A slope is the steepness of a line. Think of a set of stairs, they are pretty steep, but a wheelchair ramp rise much more gradually so that is a small slope. You can calculate how steep a slope is using the rise over run method. Pick any two points on a straight line. Look at how much the y value changes (the rise) and how much the x value changes (the run). Divide the rise by the run and you have a number that tells you how steep the slope is. To find the slope, divide the change in vertical height (the rise) by the change in horizontal distance (the run). The demonstrator will help you do this. Page 2 of 5

Slope = Change in Y Change in X 10. Have the students predict from the diagram where the change in speed occurs. They will then answer Questions 4-7 and are expected to realize that the time at which the slopes change by looking at the plot is very different from the time at which the direction changes. Have the geologist discuss this. Answers 1. There should be a positive relationship between the age and the distance, as the distance from the youngest island increases, the age of the rock increases. So this means the islands that are furthest from The Big Island of Hawaii are the oldest. 2. The speed is worked out by calculating the rise/run for each straight line. 3. The slope/speed is approximately 100km/My = 10cm/year (Group A), or 65km/My = 6.5cm/year (Group B) 4. It is expected that they would choose the change in direction. 5. 12-13 My 6. Daikakuji, ~40My 7. The two changes occur at different times and are not consistent. Page 3 of 5

Optional Game: Sweet Decay The students will simulate radioactive decay where radioactive Element A (marked side up/heads) decays and turns into stable Element B (marked side down/tails) which cannot decay. Materials: 5 x Cups of 100 MnMs (marked on one side); or pennies/coins label these testing cup 5 empty cups 5 sheets of paper towel (for MnM version) Steps: 1. Hand out cups to each group. 2. Students toss contents of cup out (onto paper towel if MnMs). 3. Students remove those with marked side down/tails to the empty cup which is set aside. 4. Students count the number of remaining radioactive elements. Record in the table. 5. Return only the radioactive (marked side up/heads) to the testing cup. 6. Students make a prediction about how many will be still radioactive in the next round. 7. Students repeat Steps 1-3. 8. Continue until there are no radioactive elements left. As the game progresses, ask: 1. Do your predictions match what is being observed? 2. (After two or three half-lives ) What is happening to the number of radioactive elements remaining? 3. Are the same number of elements being removed each time we toss the cup? 4. (At the end) At which round were half the number of radioactive elements returned to the cup? 5. And then at which round were there half as many again remaining? 6. What might we mean by the term half-life? 7. If we assume that each round represents the same number of years have gone by e.g. 10 years then what is the half-life of this radioactive element? Page 4 of 5

8. If you started with a sample of 600 radioactive elements, how many would remain un-decayed after three half-lives? 9. How does the amount of radioactive element present at the start affect the number that decay? Does it affect the half-life? 10. Is there any way to predict when a specific MnM/coin lands marked side down/tails or decayed. Answers: 1. We would expect that around half will be removed each time, but this may not always happen. The predictions will not always match because we need to have a very large number of tests to be sure that the experimental results match theoretical results of 50/50. 2. The numbers that are removed should decrease with every round. But they should be around half. 3. There should be around half at round 2, then at round 3. 4. The half-life would be 10 years. 5. After three rounds 75 should be left. 6. The number of radioactive elements left at the end will depend on how much was present to start. But the half-life will always be the same. 7. Predicting whether an element decays or not is up to chance. We can never be sure what will happen to a specific element. This is like gambling/lottery tickets. But the amount of starting material will determine how much of the radioactive element is left over time. Toss Number of radioactive nuclei Prediction for Next Toss 1 2 3 4 5 6 7 8 9 10 11 Page 5 of 5