2ZG02W35D1WBCQN2 Outline(L*W*H): 3.05*3.0*0.7 mm High flux efficiency & offer a middle power 1.0W Good thermal dissipation & optical uniformity Table of Contents Product Code Method ----------------------------------------2 Maximum Rating----------------------------------------------2 Typical Product Characteristics-----------------------------3 Range of Bins--------------------------------------------------3 Color Coordinate Comparison-------------------------------4 Electronic-optical Characteristics---------------------------5 Dimensions-----------------------------------------------------6 Reflow Profile-------------------------------------------------7 Test Circuit and Handling Precautions---------------------8 Packing-----------------------------------------------------------9 Precautions-----------------------------------------------------11 Test Items and Results of Reliability-----------------------12 Features Forward current: 150mA Typical view angle 50% Iv: 120 RoHS and REACH-compliant Lens color: yellowish Qualified according to JEDEC moisturevity Level 2a ESD level 1kV(HBM) Applications Indoor signage display applications Indoor decorating and entertainment design Flat backlight for LCD. Switch and symbol Indicator and backlighting for all consumer electronics Version: IS-1.7 NO.: BT-SMD-1310015 Page 1 of 12
Product Code Method 2 - Z - G -02- W35D - 1 - W - B - CQ - N - 2 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 Process Type Category Lead Frame Size Chip Quantity Dice Wavelength &Luminous Rank Lap Polarity 2: the standard of energy star Z: SMD Power LED G: 3030 02: 2pcs chip Wxxx: white 1: series connection 7 8 9 10 Cap Color PCB Module Code Assembly Code Process Code Spectral Condition Code W: yellowish B: article mode first code: C: CRI is 80 second code: Q: CCT is 5710K~6530K N: PLCC procedure 2:150mA for test Maximum Rating(Ta=25 ) Characteristics Symbol Rating Unit DC forward current I F 150 ma Pulse forward current *3 I PF 240 ma Reverse voltage V R 10 V Junction temperature T J 110 Operating temperature range T OP -40-80 Storage temperature range T STG -40-100 Soldering temperature *4 T SD 260 o C o C o C o C Notes 1: There is no maximum or typical voltage parameter 2: For other ambient, limited setting of current will be depended on de-rating curves. 3: Duty 1/10, pulse width 0.1ms 4: The maximum of soldering time is 5 seconds in T SD Version: IS-1.7 NO.: BT-SMD-1310015 Page 2 of 12
Typical Product Characteristics (Ta=25 ) Characteristics Symbol Min. Typ. Max. Unit Test condition Forward Voltage V F 5.6-7.0 V I F =150mA Reverse Current I R - - 10 μa V R = 10V Luminous Lumen Φ 110 118 - lm I F =150mA View Angle 2θ 1/2-120 - deg I F =150mA Color Coordinate x - 0.322 - - y - 0.335 - - I F =150mA Color Rendering Index CRI 80 - - - I F =150mA Color Temperature CCT 5710-6530 K I F =150mA Notes: 1. Measurement Errors: Forward Voltage: ±0.1V, Luminous Lumen: ±10%Φ, View Angle: ±5%, Color Coordinate (x, y) ± 0.006 Color Rendering Index: ±5, Color Temperature: ±10% 2. Electrical-Optical characteristics (Ta=25 ) Range of Bins 1). Forward Voltage Bins (I F =150mA) Bin Code Min. V F (V) Max. V F (V) A 5.6 5.8 B 5.8 6.0 C 6.0 6.2 D 6.2 6.4 E 6.4 6.6 F 6.6 6.8 G 6.8 7.0 2). Luminous Lumen Bins (I F =150mA) Bin Code Min. Φ (lm) Max. Φ (lm) 34 110 120 35 120 130 36 130 140 Version: IS-1.7 NO.: BT-SMD-1310015 Page 3 of 12
Color Coordinate Comparison Color Rank BIN x y BIN x y 0.3205 0.3481 0.3213 0.3371 1B1 0.3117 0.3393 0.3131 0.3290 1B2 0.3131 0.3290 0.3145 0.3187 0.3213 0.3371 0.3221 0.3261 0.3292 0.3539 0.3293 0.3423 2A1 0.3207 0.3462 0.3215 0.3353 2A2 0.3215 0.3353 0.3222 0.3243 0.3293 0.3423 0.3294 0.3306 Version: IS-1.7 NO.: BT-SMD-1310015 Page 4 of 12
Relative Luminous efficienct(%) Maximum Current(mA) Relative Forward Voltage(%) Relative Luminous intensity(%) Relative Radiant Intensity Relative luminous Intensity(%) 3030 Series Electrical-Optical Characteristics 1).Relative Spectral Distribution 1.0 2).Typical Spatial Distribution 0.75 0.5 0.25 0 350 400 450 500 550 600 650 700 750 Wavelength(nm) 3).Relative Luminous Flux.Current Genealogies angle 4).Relative Luminous Flux.Ambient Temperature Ambient Temperature( C) 5). Electrical Characteristics 6).Forward Voltage Temperature 7). Relative Emission Efficiency. Current 8).Thermal Design Ambient Temperature( C) Forward Current (ma) Ambient Temperature( C) Version: IS-1.7 NO.: BT-SMD-1310015 Page 5 of 12
Dimensions Cathode Mark 1 2 1 2 Cathode Recommend Pad layout Notes: 1. All dimensions are in millimeters 2. Tolerance is ±0.1mm unless otherwise noted 3. Specifications are subject to change without notice. Version: IS-1.7 NO.: BT-SMD-1310015 Page 6 of 12
temperature temperature 3030 Series Reflow Profile 1. I R reflow soldering Profile for Lead Free solder 300 250 200 150 100 1-5 /sec 260 max Pre heating 150-180 230 max 2-5 /sec 120sec.Max 10sec. max 2-5 /sec 50sec.max 50 0 25 0 50 100 150 200 250 300 Time sec 2. I R reflow soldering Profile for Lead solder 300 250 200 150 100 1-5 /sec 240 max Pre heating 150-180 210 max 2-5 /sec 120sec.Max 10sec. max 2-5 /sec 50sec.max 50 0 25 0 50 100 150 200 250 300 Time sec Notes: 1. We recommend the reflow temperature 240 (±5 ).the maximum soldering temperature should be limited to 260. 2. Don t cause stress to the silicone resin while it is exposed to high temperature. 3. Number of reflow process shall be less than 3 times. Version: IS-1.7 NO.: BT-SMD-1310015 Page 7 of 12
Test Circuit and Handling Precautions 1. Test circuit V LED 2. Handling precautions 2.1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2.2. Storage 1). It is recommended to store the products in the following conditions: Humidity: 60% R.H. Max. Temperature : 5 ~30 (41 ~86 ) 2). Shelf life in sealed bag: 12 month at <5 ~30 and <60% R.H. after the package is Opened, the products should be used within a week or they should be keeping to stored at 20%R.H. with zip-lock sealed. 2.3. Baking It is recommended to baking before soldering when the pack is unsealed after 24hrs. The Conditions are as followings: 1). 60±3 X 6hrs and <5%RH, for reel 2). 125±3 X 2hrs, for single LED It shall be normal to see slight color fading of carrier (light yellow) after baking in process Version: IS-1.7 NO.: BT-SMD-1310015 Page 8 of 12
8.00±0.10 5.25±0.10 1.75±0.10 60±0.50 13±0.2 173±0.10 3030 Series Packing Dimensions of Reel (Unit: mm) Unit:mm Labelposition 9±0.5 Dimensions of Tape (Unit: mm) 8.0±0.15 1.50±0.1 4.0±0.10 2.0±0.05 0.20±0.05 4.0±0.10 1.10±0.1 0.7±0.10 Arrangement of Tape Notes: 1. Empty component pockets are sealed with top cover tape 2. The max loss number of SMD is 2pcs 3. The cathode is oriented towards the tape sprocket hole in accordance with ANSI/EIA RS-481 specifications 4. 4,000pcs per reel Version: IS-1.7 NO.: BT-SMD-1310015 Page 9 of 12
Packing Packaging specifications Reel(4000pcs) Moisture-poof bag Label inspection request form Inner box(max. 7 reels) Label Outer box(max. 4 inner boxes). Notes: Reeled product (max.4,000) is packed in a sealed moisture-proof bag. Seven bags are packed in an inner box (size: about 260 X 230 X 100 mm) and four inner boxes are in an outer box (size: about 480 X 275 X 215mm). On the label of moisture-poof bag, there should be the information of Part No., Lot No. and quantity number; also the total quantity number should be on inspection request form on outer box. Version: IS-1.7 NO.: BT-SMD-1310015 Page 10 of 12
Precautions ----------------------------------------------------------------------------------------------------------------------------------- 1. Abnormal situation caused by improper setting of collet To choose the right collet is the key issue in improving the product s quality. LED is different from other electronic components, which is not only about electrical output but also for optical output. This characteristic made LED more fragile in the process of SMT. If the collet s lowering down height is not well set, it will bring damage to the gold wire at the time of collet s picking up and loading which will cause the LED fail to light up, light up now and then or other quality problems 2. How to choose the collet During SMT, please choose the collet that has larger outer diameter than the lighting area of lens, in case that improper position of collet will damage the gold wire inside the LED. Different collets fit for different products, please refer to the following pictures cross out Outer diameter of collet should be larger than the lighting area Picture 1( ) Picture 2(X) 3. Other points for attention A. No pressure should be exerted to the epoxy shell of the SMD under high temperature. B. Do not scratch or wipe the lens since the lens and gold wire inside are rather fragile and cross out easy to break. C. LED should be used as soon as possible when being taken out of the original package, and should be stored in anti-moisture and anti-esd package. 4. This usage and handling instruction is only for your reference. Version: IS-1.7 NO.: BT-SMD-1310015 Page 11 of 12
Test Items and Results of Reliability ------------------------------------------------------------------------------------------------------------------------------ Test Item Test Conditions Duration/ Cycle Number of Damage Reference Temperature Cycle -40 30min 1 min 85 30min 100 cycles 0/22 JEITA ED-4701 300 303 High Temperature Storage T a =100 ±5 1000 hrs 0/22 EIAJED-4701 200 201 High Humidity Heat Life Test T a=85 RH=85% I F =100mA 500 hrs 0/22 Tested with Brightek standard Humidity Heat Storage T a =85 RH=85% 1000 hrs 0/22 EIAJED-4701 100 103 Life Test T a =25 I F =150mA 1000 hrs 0/22 Tested with Brightek standard Low Temperature Life Test T a =-40 I F =150mA 1000 hrs 0/22 Tested with Brightek standard High Temperature Life Test T a =85 I F =150mA 1000 hrs 0/22 Tested with Brightek standard *Criteria for Judging Item Symbol Condition Criteria for Judgment of Pass Min Max Forward Voltage V F I F =150mA - USL* 1 1.1 Reverse Current I R V R = 10V - 10μA Luminous Lumen Φ I F =150mA LSL *2 0.7 - [Note] USL* 1 : Upper Specification Level LSL* 2 : Lower Specification Level Version: IS-1.7 NO.: BT-SMD-1310015 Page 12 of 12