High Temperature Chemical Processes, Stadiou str., Platani, Patras, Greece

Similar documents
SOLUTE DISPERSION COEFFICIENTS IN HETEROGENEOUS POROUS MEDIA AS RELATED WITH THE MIGRATION OF PESTICIDES IN GROUNDWATER

Estimating flow properties of porous media with a model for dynamic diffusion

Dual porosity DRM formulation for flow and transport through fractured porous media

EVALUATION OF THERMAL CONDUCTIVITY IN PITCH- BASED CARBON FIBER REINFORCED PLASTICS

A method to determine relative stroke detection efficiencies from multiplicity distributions

Adsorption of 2,4-Xylidine on Granulated Activated Carbon in a Packed Bed Absorber. f f

Topic 5a Introduction to Curve Fitting & Linear Regression

NUMERICAL SIMULATION AND PARAMETRIC STUDY OF LAMINAR MIXED CONVECTION NANOFLUID FLOW IN FLAT TUBES USING TWO PHASE MIXTURE MODEL

Simulation of Geomechanical Behavior during SAGD Process using COMSOL Multiphysics

Sexually Transmitted Diseases VMED 5180 September 27, 2016

Experimental Design For Model Discrimination And Precise Parameter Estimation In WDS Analysis

Spine Fin Efficiency A Three Sided Pyramidal Fin of Equilateral Triangular Cross-Sectional Area

Monitoring and system identification of suspension bridges: An alternative approach

Analytical investigation of unsteady CuO nanofluid flow, heat and mass transfer between two parallel disks

Solidification of Porous Material under Natural Convection by Three Phases Modeling

A LABORATORY EXPERIMENT FOR UNDERGRADUATE INSTRUCTION: NON-IDEAL FLOW IN TUBULAR VESSELS

Darcy s law describes water flux determined by a water potential gradient: q w = k dψ dx

ANALYTICAL INVESTIGATION AND PARAMETRIC STUDY OF LATERAL IMPACT BEHAVIOR OF PRESSURIZED PIPELINES AND INFLUENCE OF INTERNAL PRESSURE

A comparative study of conventional arrays of resistivity prospecting with differential arrays

MODIFIED SERIES RESISTANCE MODEL - DETERMINATION OF MEAN CONCENTRATION BY INTEGRAL TRANSFORMATION

12 Towards hydrodynamic equations J Nonlinear Dynamics II: Continuum Systems Lecture 12 Spring 2015

REDUCTION OF FINITE ELEMENT MODELS BY PARAMETER IDENTIFICATION

A NEW APPROACH TO DYNAMIC BUCKLING LOAD ESTIMATION FOR PLATE STRUCTURES

THERMAL ENDURANCE OF UNREINFORCED UNSATURATED POLYESTERS AND VINYL ESTER RESINS = (1) ln = COMPOSITES & POLYCON 2009

Modelling of the Through-air Bonding Process

Supporting Online Material

National 5 Summary Notes

External Transverse Direct Current Magnetic Field Effect On Optical Emission Of a Non-Thermal Atmospheric Pressure Argon Plasma Jet

ANALYSIS OF HALL-EFFECT THRUSTERS AND ION ENGINES FOR EARTH-TO-MOON TRANSFER

Proc. of the IEEE/OES Seventh Working Conference on Current Measurement Technology UNCERTAINTIES IN SEASONDE CURRENT VELOCITIES

3D acoustic wave modeling with a time-space domain dispersion-relation-based Finite-difference scheme

Mathematical Study on MHD Squeeze Flow between Two Parallel Disks with Suction or Injection via HAM and HPM and Its Applications

The Development of a Generalised Jet Mixing Model for the Derivation of Exclusion Zones in Hazardous Area Classification

MAKE SURE TA & TI STAMPS EVERY PAGE BEFORE YOU START

HIGH RESOLUTION NEAR-FIELD MULTIPLE TARGET DETECTION AND LOCALIZATION USING SUPPORT VECTOR MACHINES

This is a repository copy of Analytical optimisation of electromagnetic design of a linear (tubular) switched reluctance motor.

Revealing spatially heterogeneous relaxation in a model. nanocomposite

Chapter 4: Hypothesis of Diffusion-Limited Growth

ASSESSMENT OF THE VOLUME CHANGE BEHAVIOUR

MAGNETOHYDRODYNAMIC FLOW OF NANOFLUID WITH HOMOGENEOUS-HETEROGENEOUS REACTIONS AND VELOCITY SLIP

Journal of Solid Mechanics and Materials Engineering

Model Fitting. CURM Background Material, Fall 2014 Dr. Doreen De Leon

Feature Extraction Techniques

Chapter 1 Introduction and Kinetics of Particles

S O RPTOME TE R BET A

1 (40) Gravitational Systems Two heavy spherical (radius 0.05R) objects are located at fixed positions along

Keywords: Estimator, Bias, Mean-squared error, normality, generalized Pareto distribution

entropy ISSN by MDPI

Developed Correlations for Prediction of The Enthalpies of Saturated Vapor Liquid Coexisting Phases

e-companion ONLY AVAILABLE IN ELECTRONIC FORM

An Optimal Analysis of Flow and Heat Transfer over a Slender Permeable Elastic Sheet with Variable Fluid Properties

Direct numerical simulation of matrix diffusion across fracture/matrix interface

2002 University of Porto, Faculty of Engineering (FEUP)

MODELING OF SUBSURFACE BIOBARRIER FORMATION

Two Dimensional Consolidations for Clay Soil of Non-Homogeneous and Anisotropic Permeability

Kernel based Object Tracking using Color Histogram Technique

Faraday's Law Warm Up

Lecture 8.2 Fluids For a long time now we have been talking about classical mechanics, part of physics which studies macroscopic motion of

Kinetic Molecular Theory of. IGL is a purely empirical law - solely the

An Approximate Model for the Theoretical Prediction of the Velocity Increase in the Intermediate Ballistics Period

Racemic -cyclohexyl-mandelic Acid Resolution across Hollow Fiber Supported Liquid Membrane

Ocean 420 Physical Processes in the Ocean Project 1: Hydrostatic Balance, Advection and Diffusion Answers

Kinetic Molecular Theory of Ideal Gases

Natural Convective Boundary Layer Flow over a Horizontal Plate Embedded in a Porous Medium Saturated with a Nanofluid

Analyzing Simulation Results

MODELING OF SUBSURFACE BIOBARRIER FORMATION

Supplement of Detailed characterizations of the new Mines Douai comparative reactivity method instrument via laboratory experiments and modeling

The Effects of External Parallel Direct Current Magnetic Field on a Cold Atmospheric Pressure Argon Plasma Jet

I. Concepts and Definitions. I. Concepts and Definitions

The Thermal Dependence and Urea Concentration Dependence of Rnase A Denaturant Transition

Data-Driven Imaging in Anisotropic Media

Physics 2107 Oscillations using Springs Experiment 2

c 2013 Society for Industrial and Applied Mathematics

Geometric part of uncertainties in the calculation constant of the primary four electrode conductivity cell

are equal to zero, where, q = p 1. For each gene j, the pairwise null and alternative hypotheses are,

Projectile Motion with Air Resistance (Numerical Modeling, Euler s Method)

OBJECTIVES INTRODUCTION

CHAPTER 3 Microfiltration,Ultrafiltration Models for Predicting Flux for MF, UF

A remark on a success rate model for DPA and CPA

MONITORING THE SURFACTANT-ENHANCED OIL DISSOLUTION AND MOBILIZATION IN POROUS MEDIA

Nonlinear Stabilization of a Spherical Particle Trapped in an Optical Tweezer

Easy Evaluation Method of Self-Compactability of Self-Compacting Concrete

STUDY OF THERMAL DIFFUSIVITY IN HEAT-INSULATING MATERIALS

UNCERTAINTIES IN THE APPLICATION OF ATMOSPHERIC AND ALTITUDE CORRECTIONS AS RECOMMENDED IN IEC STANDARDS

The Wilson Model of Cortical Neurons Richard B. Wells

PULSED POWER ELECTROMECHANICS - PERMANENT MAGNETS VERSUS COPPER COILS

DESIGN OF THE DIE PROFILE FOR THE INCREMENTAL RADIAL FORGING PROCESS *

Follow this and additional works at: Part of the Materials Science and Engineering Commons

Arithmetic Unit for Complex Number Processing

Supporting Material Supplement

Analysis and Extraction of Temperature Effects on Natural Frequencies of a Footbridge based on Continuous Dynamic Monitoring

Name: Partner(s): Date: Angular Momentum

CHEMICALLY REACTING ON MHD BOUNDARY-LAYER FLOW OF NANOFLUIDS OVER A NON-LINEAR STRETCHING SHEET WITH HEAT SOURCE/SINK AND THERMAL RADIATION

Measuring Temperature with a Silicon Diode

Block designs and statistics

CONVECTIVE HEAT TRANSFER CHARACTERISTICS OF NANOFLUIDS. Convective heat transfer analysis of nanofluid flowing inside a

DECONVOLUTION VERSUS CONVOLUTION A COMPARISON FOR MATERIALS WITH CONCENTRATION GRADIENT

PART 4. Theoretical Competition

Accuracy of the Scaling Law for Experimental Natural Frequencies of Rectangular Thin Plates

An Introduction to Meta-Analysis

Transcription:

SCA2007-43 1/6 FRO A ULTI-REGION ODEL TO A ULTI-FLOW PATH ODEL: INTERPRETATION OF FLOW TESTS ON HETEROGENEOUS CORES Christos A.Aggelopoulos 1,2 and Christos D. Tsairoglou 1 1 Foundation or Research and Technology Hellas- Institute o Cheical Engineering and High Teperature Cheical Processes, Stadiou str., Platani, 26504 Patras, Greece 2 Departent o Physics, University o Patras, 26500 Greece This paper was prepared or presentation at the International Syposiu o the Society o Core Analysts held in Calgary, Canada, 10-12 Septeber 2007 ABSTRACT Iiscible and iscible displaceent tests perored on long undisturbed soil coluns are eployed to quantiy the soil heterogeneity at the acro- and icro- scale, respectively. The transient responses o the solute concentration (breathrough curve) over three cross-sections are inverted by using a ulti-region odel to estiate the longitudinal dispersivity along with the variance o the icroscopic pereability distribution (icro-heterogeneity). The transient responses o the total pressure drop across the soil colun, and luid saturation averaged over ive successive segents are inverted by using a ulti-low path odel to estiate the variance o the acroscopic pereability distribution (acro-heterogeneity) along with the tortuosity, and paraeters quantiying the capillary pressure and relative pereability curves. INTRODUCTION Iiscible and iscible displaceent experients are coonly used to deterine the two-phase low and hydrodynaic dispersion coeicients o soils, respectively. The capillary pressure and relative pereability curves are estiated by inverting the transient responses o pressure drop and axial luid saturation proile, whereas the hydrodynaic dispersion coeicients can be estiated by inverting the transient responses o solute concentration breathrough curves (Tsairoglou et al., 2005). The goal o the present wor is to develop coputational tools that will enable us to interpret the results o low tests, not only by estiating the corresponding ultiphase eective transport coeicients but also by quantiying the heterogeneity o soils at ultiple scales. EXPERIENTAL SETUP An experiental apparatus was constructed to easure the electrical conductance o disturbed and undisturbed sandy soils during iiscible and iscible displaceent experients. The apparatus consists o the saple holder, an in house constructed ultipoint conductivity eter, a HPLC pup, and a data-acquisition syste installed in the host coputer (Aggelopoulos and Tsairoglou, 2005).

SCA2007-43 2/6 A core holder was constructed to peror low tests on undisturbed soil coluns. The undisturbed soil saple (length L =32.7 c, diaeter D =4.75 c) is transerred careully ro the sapler into a rubber sleeve which is equipped with rod electrodes (Fig.1) and is closed by placing two coposite caps on its ends. The entire syste is placed inside an adjustable length cell body with the overburden pressure exerted on the sleeve to be slightly higher than the axiu pore pressure so that soil expansion and luid leaages are avoided. Two undisturbed soil coluns (S3, S4) were collected ro dierent depths o the unsaturated zone o an abandoned ilitary airport, situated in North Poland and containated by jet uel. Properties o soil coluns: (S3) porosityφ =0.25, pereability 0 =50 D, oration actor F=10.1; (S4) φ =0.25, 0 =142 D and F=8.3. Beore testing, each soil colun was cleaned careully by treating it with ethanol, ethanol and toluene, and vice versa to ensure the reoval o any traces o jet uel. INVERSE ODELING OF ISCIBLE DISPLACEENT TESTS BSE iages o pore casts (Fig.2a) and Hg injection tests (Fig.2b) have revealed that the pore structure o the investigated soils is characterized by a broad range o pore length scales spanning several orders o agnitude. In order to describe solute transport through such icro-scale heterogeneities (Fig.2a) a 2-paraeter ulti-region odel was used. A two-paraeter ulti-region odel o iscible displaceent The pore space is regarded as an asseblage o intercounicating parallel regions characterized by an area-based distribution o pereabilities ( ; ) σ, where the diensionless icro-scale pereability is deined as = 0, 0 is the easured total pereability, and σ is the standard deviation o the icro-scale pereability distribution unction, and quantiies icro-scale heterogeneities (Fig.2). Solute dispersion in each region is described by the analytic solution o the 1-D advection-dispersion equation in hoogeneous porous edia (Tsairoglou et al., 2005). The intercounication between the various regions ensures that luid pressure does not change over a cross-section and no convective solute transport occurs because o lateral pressure gradient. In addition, any lateral diusive lux is also ignored. Under the aboveentioned assuptions, the cross-sectional averaged solute concentration is given by C = 0 C ( ) d C where the local solute concentration is given by the analytic solution o the advection-dispersion equation. The local low velocity and dispersion coeicient o each region vary according to the relations p u = u D = D + α u a (2) p0 L e L p (1)

SCA2007-43 3/6 where u p0 is the ean pore velocity and D e the eective diussivity. For acrodispersion, the exponent a = 1, and the ulti-region odel is quantiied by two paraeters: α,. The Bayesian estiator o ATHENA Visual Studio 10 was used to L σ estiate the longitudinal dispersivity, α L, and σ by itting the predictions o the ultiregion odel siultaneously to solute breathrough curves easured at three cross- sections o soils S3 & S4 (Table 1). The estiated dispersivity (Table 1) is coparable to corresponding values reported in literature (Roychoudhury, 2001); α L is a easure o the length-scale o soil acro-heterogeneities, and changes wealy with low velocity (Table 1). The easured breathrough curves are reproduced satisactorily by the ulti-region odel (Fig.3a,b). It is worth entioning the physical inoration ebedded into the paraeter values o the ulti-region odel. On the one hand, the dispersivity is indicative o the length-scale o acro-heterogeneities. On the other hand, the standard deviation o pereability distribution is indicative o the icro-heterogeneities associated with the variability o the pore length scales (Fig.2). In other words, iscible displaceent experients on undisturbed soils ay be treated as a diagnostic tool o the soil heterogeneity and provide quantitative inoration about it. INVERSE ODELING OF TWO-PHASE FLOW EXPERIENTS During rate-controlled iiscible displaceent experients on both soil coluns S3 and S4, oil breathrough occurred very ast, and the variation o water saturation in the lower segents o the soil colun was quite sall, and very diicult to be detected precisely. Oil oves along preerential low paths and ost o the water is bypassed, resulting in a high value o irreducible wetting phase saturation. In order to account or such characteristics o the 3-D low ield the ulti-low path odel was adopted. ulti-low path odel The broad range o pore length scales probed in undisturbed soils (Fig.2), induces the creation o highly pereable (critical) pathways which transer ost o the low and control the pereability and electrical conductivity o the soil (Tsairoglou et al., 2006). These low pathways exhibit the sallest capillary resistance to the invasion o the nonwetting luid (oil) and hence they also act as preerential oil low paths during drainage. The pore space is represented by a syste o low paths characterized by a distribution o acro-scale pereability, ( ; ) Σ. The standard deviation, Σ, is a easure o the soil acro-heterogeneity, as it indicates the degree o uniority aong the various low paths. Each low path contains a sub-set o the regions entioned earlier (ultiregion odel), and its pereability is governed by the pereability distribution over this sub-set. The low paths are neither straight nor perpendicular to the ain low direction, and their ean length L p is deined by a coon tortuosity actor, λ = L L p, where L is the soil core length. The oil/water displaceent in each low path is regarded as

SCA2007-43 4/6 rontal and is described by the irreducible wetting phase saturation, S wi, and end oil 0 relative pereability = ( S = S ) ro ro w wi. In order to copute the capillary pressure o displaceent in each low path, a 2-paraeter Leverett type equation o the or c δ ( ) ( cγ θ ) P cos (3) = ow was used. Using ass and oentu balances, oil/water displaceent was described by a syste o integral & dierential equations with dependent variables the total pressure drop, P t ( τ ) and the positions, ξ ( ) o interaces (ronts) along low paths. This approach is analogous to earlier ones developed or siulating the two-phase low in a disordered syste o parallel capillary tubes (Bartley and Ruth, 1999; Dong et al., 2006). Using Athena Visual Studio 10, the easured transient responses o the water saturation proile and total pressure drop were itted with the ulti-low path odel in order to estiate all pertinent paraeters. The syste o equations is solved iteratively by using the Sipson ethod to integrate the pressure drop over all low paths and a 4 th order Runge-Kutta to calculate the axial position o interaces as a unction o tie. It is evident that the acro-heterogeneity (Table 2) is uch weaer than icro-heterogeneity (Table 1). The transversely averaged luid saturation calculated at the current axial positions o the interaces (ronts), ξ ( ) capillary pressures P c ( ), Eq.(3), to copute P c ( S o ) pereabilities as unctions o the current positions o the ronts in low paths, ( ) were calculated by using the relationships ro ax, was plotted versus the corresponding, ξ 0 ( ξ ) = ( ) d ( ξ ) = ( ) ro ( ξ ) rw ( ), in. Respectively, the relative d ξ, The low levels o oil saturation easured over the lower segents are coparable to the resolution o the technique and or this reason a discrepancy is observed between experient and theoretical prediction (Fig.4). The capillary pressure and relative pereability curves estiated by the ulti-low path odel are shown in Fig.5. REFERENCES 1. Aggelopoulos, C., and C.D. Tsairoglou, Siultaneous deterination o the two-phase low and hydrodynaic dispersion coeicients o soils ro transient iiscible and icible displaceent experients, Proceeding o the 2005 Annual Syposiu o the Society o Core Analysts, Paper SCA2005-58, Toronto, Canada, 21-25 August 2005. 2. Bartley, J.T. and D.W. Ruth, Relative pereability analysis o tube bundle odels, Transp. Porous edia (1999) 36, 161-187. 3. Dong,., F.A.L. Dullien, L. Dai, and D. Li, Iiscible displaceent in the interacting capillary bundle odel. Part II. Applications o odel and coparison o interacting and non-interacting capillary bundle odel, Transp. Porous edia (2006) 63, 289-304. (4)

SCA2007-43 5/6 4. Roychoudhury, A.N., Dispersion in unconsolidated aquatic sedients, Estuar. Coast. Shel. S. (2001) 53, 745-757. 5. Tsairoglou, C.D.,.A. Theodoropoulou, V. Karoutsos, and D. Papanicolaou, Deterination o the eective transport coeicients o pore networs ro transient iiscible and iscible displaceent experients, Water Resources Research, (2005) 41, W02014. 6. Tsairoglou, C.D.,.A. Ioannidis, E. Airtharaj, O. Vizia, A new approach or the characterization o the pore structure o dual porosity rocs, Proceeding o the 2006 Annual Syposiu o the Society o Core Analysts, Paper SCA2005-24, Trondhei, Norway, 12-16 Sept. 2006. ACKNOWLEDGEENTS This wor was perored under Global Change and Ecosystes contract nuber SSPI- CT-2003-004017-STRESOIL (2004-2007) supported by the European Coission. Table 1. Estiated paraeter values o the ulti-region odel u Soil colun S3 Soil colun S4 p0 (/s) α L (c) σ α L (c) σ 1.50e-6 2.96 1.40 - - 2.63e-6 4.0 2.36 9.67 1.59 3.76e-6 1.20 1.34 5.96 1.70 5.26e-6 1.74 1.24 6.01 1.48 7.52e-6 - - 5.26 0.86 9.40e-6 2.23 0.90 3.72 1.04 Table 2. Estiated paraeter values o the ulti-low path odel Paraeter Soil S3 Soil S4 Σ 0.16 0.07 λ 0.88 1.0 c 1.2x10-3 4.7x10-4 δ 0.70 0.72 S wi 0.57 0.56 0 ro 0.6 0.51 0.14 0.12 0.10 Figure 1. Rubber sleeve with soil colun and builtin rod electrodes. V Hg (c 3 /g) 0.08 0.06 0.04 Saple: C-15 Hg intrusion Hg retraction 0.02 Porosity, φ=0.235 Pore volue, V p =0.1198 c 3 /g 0.00 1E-3 0.01 0.1 1 10 100 Pore diaeter, D (µ) Figure 2. BSE iage (agniication=300x) o the 2-D cross-section o saple C15 originating ro the sae zone with that o soil colun S4. Hg intrusion / retraction curves o saple C15

SCA2007-43 6/6 1.0 1.0 0.8 0.8 C =(C-C i )/(C 0 -C i ) 0.6 0.4 u p0 =1.50x10-6 /s a L =2.96 c σ =1.40 0.2 eas. pred. x=25.65 c eas. pred. x=19.45 c eas. pred. x=7.05 c 0.0 0 1x10 5 2x10 5 3x10 5 4x10 5 5x10 5 C =(C-C i )/(C 0 -C i ) 0.6 0.4 u p0 =3.76x10-6 /s a L =5.96 c σ =1.70 0.2 eas. pred. x=25.65 c eas. pred. x=19.45 c eas. pred. x=7.05 c 0.0 0 1x10 5 2x10 5 3x10 5 4x10 5 t (s) Figure 3. Experientally easured vs theoretically predicted (ulti-region odel) solute concentration breathrough curves at various ean pore velocities or soil S3, soil S4. ean oil saturation, <S oj > 0.20 0.15 0.10 0.05 Observed Predicted ξ 1 ξ 2 ξ j 0.026 0.215 0.12 1 0.215 0.405 0.31 2 0.405 0.595 0.50 3 0.595 0.784 0.69 4 0.784 0.974 0.88 5 0.00 0.0 0.1 0.2 0.3 0.4 0.5 Diensionless tie, τ P = P/(ρ w gl) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 t(s) 0.0 0.0 0.1 0.2 0.3 0.4 0.5 τ=tu 0 /(φl) easured Predicted Figure 4. Nuerically predicted vs experientally easured axial saturation proiles, pressure drop across the soil colun. 10000 1000 Soil S4 history atching Hg intrusion (C15) 1 0.8 0.6 100 0.4 P c (Pa) 10 rw, ro 0.2 Soil S4 1 ro 0.1 1E-5 1E-4 1E-3 0.01 0.1 1 rw 0.1 1E-6 1E-5 1E-4 1E-3 0.01 0.1 S o Figure 5. Estiated capillary pressure curve vs oil/water capillary pressure curve resulting ro Hg intrusion data. Estiated relative pereability curves. S o