M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series Headers mate with CompactFlash Type I cards 4.0 mm Low Profile height Inverse card polarization Extended guide rails enable accurate and easy card insertion Single row surface mount soldertails facilitate auto placement and IR soldering. Meets CFA standards for known compatibility and reliability Solder tabs and mounting holes provide secure PCB attachment RoHS compliant. See paragraphs E1 and C1 of Regulatory Information Appendix. Date Modified: August 18, 2008 TS-0765-D Sheet 1 of Physical Electrical Insulation: Material: Liquid Crystal Polymer (LCP) Flammability: UL 94V-0 Color: Beige Contact: Material: Copper Alloy Plating: Underplating: 100 μ" [ 2.54 μm ] Ni Wiping Area: Au Flash over 20 u" (0.5 um) Pd-Ni, Lubricated Solder Tails: Au Flash Marking: M Logo, Part Number, Date Code Current Rating:.5 A Environmental Insulation Resistance: >1 10 9 Ω at 500 V DC >1 10 8 Ω at 500 V DC after Environmental Conditioning Withstanding Voltage: 500 V RMS min. for 1 minute Temperature Rating: -55 C to +85 C Process Rating: Maximum 260 C (per J-STD-020C) UL File No.: E68080 CompactFlash is a registered trademark of SanDisk Corporation. Electronic Solutions Division Interconnect Solutions http://www.m.com/interconnects/ For technical, sales or ordering information call 800-225-57
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series 8.74 [ 1.525 ] 2.84 [ 1.29 ] Pin Type Interface Dim A Pin No. detect.50 [.18 ] 25, 26 general 4.25 [.167 ] all other pins power 5.00 [.197 ] 1, 1, 8 & 50 0.65 [.0250 ] Typ 2X 0.9 [.04 ] 2X Ø 2.20 [.087 ] 0.0 [.012 ] Typ 4.50 [.177 ] 6.00 [.26 ] 1.0 [.04 ] 2X. [.1 ] -A- -A- 19.0 [.748 ] 27.9 [ 1.10 ] A Ø1.5 [.06 ] 1.5 [.06 ] Ø 0.44 Typ [.017 ] 4.0 [ 1.694 ] 5.5 [.217 ] 2.00 [.079 ] 4.0 [.16 ] 47.0 [ 1.85 ] 50.0 [ 1.97 ] Section A-A 0.48 [ 1.200 ] 1.27 Typ [.050 ] Pin 50 Pin 8 Pin 26 C 1.27 Typ [.050 ].79 [.01 ] (See note) Pin 25 Pin 1 1.40 Pin 1 [.055 ] 8.75 [ 1.5250 ] (See note) 2X.89 [.05 ] mm [Inch] Tolerance Unless Noted.0.00.000 mm ±. ±.15 [ ] Dimensions for Reference Only Ordering Information N7E50 - F516PK - 0 (RIA E1 & C1 apply) Note: Contact M for Tape and Reel packaging options. TS-0765-D Sheet 2 of Electronic Solutions Division Interconnect Solutions http://www.m.com/interconnects/ For technical, sales or ordering information call 800-225-57
M CF Card Header CompactFlash Type I, Low Profile, Long Guides, SMT, Inverse 7E50 Series 46.20 ± 0.15 [ 1.819 ] 8.74 ± 0.10 [ 1.525 ] for M2 1.115 ± 0.050 [ 1.225 ] 0.65 ± 0.0 Typ [.0250 ].00 ± 0.10 [.118 ].50 ± 0.05 [.18 ] 7.75 ± 0.05 [.05 ] Pin 25 Pin 26 2X Ø2.20 ± 0.05 [.087 ] ( Through for M2 ) 2X Ø1.70 ± 0.0 [.067 ] Pin 50 0.40 ± 0.0 Typ [.016 ] Pin 1 17.25 ± 0.15 [.679 ] 20.5 Min [.81 ] ( Through for locating Boss ) 8.75 ± 0.050 [ 1.5250 ] The End of P.C. Board 2X 2.5 ± 0.15 [.10 ] 2X 4.5 ± 0.15 [.18 ] The Direction of Inserting Card Recommended PCB Solder Pad Pattern TS-0765-D Sheet of Electronic Solutions Division Interconnect Solutions http://www.m.com/interconnects/ For technical, sales or ordering information call 800-225-57
Regulatory Information Appendix M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decabde in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 0, 2008. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. RIA-2217B-E
Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T116-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T1164-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix C2: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T116-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T1164-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-E
Appendix C: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T116-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T1164-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-57 www.m.com/interconnects Please recycle. Printed in USA. M 2008. All rights reserved. RIA-2217B-E