M3D73 Rev. 3 March 24 Product data. Product profile. Description N-channel enhancement mode field-effect transistor in a plastic package using TrenchMOS technology..2 Features Surface mounted package Low on-state resistance Footprint 63% smaller than SOT23 Low threshold voltage..3 Applications Driver circuits Switching in portable appliances..4 Quick reference data V DS 3 V P tot.53 W I D.8 A R DSon 48 mω. 2. Pinning information Table : Pinning - SOT46 (SC-75), simplified outline and symbol Pin Description Simplified outline Symbol gate (g) 2 source (s) 3 drain (d) 3. Ordering information 3 2 Top view MBK9 SOT46 (SC-75) g MBB76 d s Table 2: Ordering information Type number Package Name Description Version SC-75 Plastic surface mounted package; 3 leads SOT46
4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 634). Symbol Parameter Conditions Min Max Unit V DS drain-source voltage (DC) 25 C T j 5 C - 3 V V DGR drain-gate voltage (DC) 25 C T j 5 C; R GS =2kΩ - 3 V V GS gate-source voltage (DC) - ±8 V I D drain current (DC) T sp =25 C; V GS = 4.5 V; Figure 2 and 3 -.8 A T sp = C; V GS = 4.5 V; Figure 2 -.5 A I DM peak drain current T sp =25 C; pulsed; t p µs; Figure 3 -.6 A P tot total power dissipation T sp =25 C; Figure -.53 W T stg storage temperature 55 +5 C T j junction temperature 55 +5 C Source-drain diode I S source (diode forward) current (DC) T sp =25 C -.44 A I SM peak source (diode forward) current T sp =25 C; pulsed; t p µs -.88 A 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 2 of 2
2 3aa7 2 3aa25 P der (%) I der (%) 8 8 4 4 5 5 2 T sp ( C) 5 5 2 T sp ( C) P der P tot I D = ---------------------- % I P der = ------------------- % I tot ( 25 C ) D25C ( ) Fig. Normalized total power dissipation as a function of solder point temperature. Fig 2. Normalized continuous drain current as a function of solder point temperature. 3ao6 ID (A) Limit RDSon = VDS / ID tp = µs µs - DC ms ms ms -2-2 V DS (V) Fig 3. T sp =25 C; I DM is single pulse; V GS = 4.5 V Safe operating area; continuous and peak drain currents as a function of drain-source voltage. 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 3 of 2
5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-sp) thermal resistance from junction to solder point Figure 4 - - 235 K/W 5. Transient thermal impedance 3 3an29 Z th(j-sp) (K/W) 2 δ =.5.2. P t p δ = T.5.2 single pulse -4-3 -2 - tp (s) t p T t Fig 4. Transient thermal impedance from junction to solder point as a function of pulse duration. 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 4 of 2
6. Characteristics Table 5: Characteristics T j =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Static characteristics V (BR)DSS drain-source breakdown voltage I D =µa; V GS =V T j =25 C 3 - - V T j = 55 C 27 - - V V GS(th) gate-source threshold voltage I D =.25 ma; V DS =V GS ; Figure 9 T j =25 C.45.7 V T j = 5 C.25 - - V T j = 55 C - -.2 V I DSS drain-source leakage current V DS =3V; V GS =V T j =25 C - - µa T j = 5 C - - µa I GSS gate-source leakage current V GS = ±8 V; V DS = V - na R DSon drain-source on-state resistance V GS = 4.5 V; I D =.2 A; Figure 7 and 8 T j =25 C - 4 48 mω T j = 5 C - 66 86 mω V GS = 2.5 V; I D =. A; Figure 7 and 8-48 58 mω V GS =.8 V; I D =.75 A; Figure 7 and 8-58 83 mω Dynamic characteristics Q g(tot) total gate charge I D = A; V DD =5V; V GS = 4.5 V; -.89 - nc Q gs gate-source charge Figure 3 -. - nc Q gd gate-drain (Miller) charge -.2 - nc C iss input capacitance V GS =V; V DS = 25 V; f = MHz; - 43 - pf C oss output capacitance Figure - 7.7 - pf C rss reverse transfer capacitance - 4.8 - pf t d(on) turn-on delay time V DD =5V; R L =5Ω; - 4 - ns t r rise time V GS = 4.5 V; R G =6Ω - 7.5 - ns t d(off) turn-off delay time - 8 - ns t f fall time - 4.5 - ns Source-drain diode V SD source-drain (diode forward) voltage I S =.3 A; V GS =V;Figure 2 -.76.2 V 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 5 of 2
2.5 I D (A) 2 3an94 4.5 V 3 V 2.5 V 2 V 2.5 I D (A) 2 V DS > I D x R DSon 25 C T j = 5 C 3an96.5.8 V.5 V GS =.5 V.5.5.5.5 2 V DS (V) 2 3 4 V GS (V) Fig 5. T j =25 C Output characteristics: drain current as a function of drain-source voltage; typical values. Fig 6. T j =25 C and 5 C; V DS > I D xr DSon Transfer characteristics: drain current as a function of gate-source voltage; typical values. RDSon (Ω).8 VGS =.8 V 2 V 3an95.8 a 3al.6 2.5 V 3 V.2 4.5 V.4.6.2.5.5 2 2.5 ID (A) -6 6 2 8 Tj ( C) T j =25 C R a = DSon ---------------------------- R DSon ( 25 C ) Fig 7. Drain-source on-state resistance as a function of drain current; typical values. Fig 8. Normalized drain-source on-state resistance factor as a function of junction temperature. 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 6 of 2
3aj65-3 3am43 V GS(th) (V).8.6 typ I D (A) -4.4 min -5 min typ.2-6 6 2 8 T j ( C) -6.2.4.6.8 V GS (V) Fig 9. I D =.25 ma; V DS =V GS T j =25 C; V DS =5V Gate-source threshold voltage as a function of junction temperature. Fig. Sub-threshold drain current as a function of gate-source voltage. 2 3an98 C (pf) Ciss Coss Crss - 2 VDS (V) V GS = V; f = MHz Fig. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values. 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 7 of 2
3an97 5 3an99 I S (A).8 V GS = V V GS (V) 4 I D = A T j = 25 C V DD = 5 V.6 3.4 2.2 5 C T j = 25 C.2.4.6.8 V SD (V).2.4.6.8 Q G (nc) T j =25 C and 5 C; V GS =V I D = A; V DD =5V Fig 2. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values. Fig 3. Gate-source voltage as a function of gate charge; typical values. 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 8 of 2
7. Package outline Plastic surface mounted package; 3 leads SOT46 D B E A X v M A H E 3 Q A 2 A c e b p w M B e L p detail X.5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A max mm.95..6 bp c D E e e H E L p Q v w.3.5.25..8.4.9.7.5.75.45.45.5.23.3.2.2 OUTLINE VERSION REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE SOT46 SC-75 97-2-28 Fig 4. SOT46 (SC-75). 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 9 of 2
8. Soldering 2.2.6..7 solder lands 2..85 3 2.5 solder resist.5 (3x) occupied area solder paste.6 (3x).9 MSA438 Dimensions in mm. Fig 5. Reflow soldering footprint for SOT46 (SC-75). 9. Revision history Table 6: Revision history Rev Date CPCN Description 2433 - Product data (9397 75 2665) 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 of 2
. Data sheet status Level Data sheet status [] Product status [2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.. Definitions Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 634). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2. Disclaimers customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status Production ), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 3. Trademarks TrenchMOS is a trademark of Koninklijke Philips Electronics N.V. Life support These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors Contact information For additional information, please visit http://www.semiconductors.philips.com. For sales office addresses, send e-mail to: sales.addresses@www.semiconductors.philips.com. Fax: +3 4 27 24825 9397 75 2665 Koninklijke Philips Electronics N.V. 24. All rights reserved. Product data Rev. 3 March 24 of 2
Contents Product profile........................... Description.............................2 Features...............................3 Applications............................4 Quick reference data..................... 2 Pinning information...................... 3 Ordering information..................... 4 Limiting values.......................... 2 5 Thermal characteristics................... 4 5. Transient thermal impedance.............. 4 6 Characteristics.......................... 5 7 Package outline......................... 9 8 Soldering............................. 9 Revision history........................ Data sheet status....................... Definitions............................ 2 Disclaimers............................ 3 Trademarks............................ Koninklijke Philips Electronics N.V. 24. Printed in The Netherlands All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 3 March 24 Document order number: 9397 75 2665