Customer Approval Sheet Product: 3014 White SMD LED Part Number: PT30A02 V0 (5600K) Customer: Issue Date: 2011/01/03 Feature High brightness Top view LED Dice Technology : InGaN Small package outline (LxWxH) of 3.0 x 1.4 x 1.2 mm Wide viewing angle (Lambertian Emitter) Top Diffusion Lens No UV Qualified according to JEDEC moisture sensitivity Level 1 Applications General lighting MAKER Prepared Checked Approved CUSTOMER PT30A02 V0 (5600K) - 1/16 -
Opto-Electronical Characteristics Ta=25 Parameter Color Condition Min. Typical Max Unit Forward Voltage* Cool White I F =20mA 2.8 3.5 V Color Temperature** Cool White I F =20mA 5600 K Luminous Intensity*** Cool White I F =20mA 2200 mcd CRI Cool White I F =20mA 80 85 View Angle Cool White I F =20mA 120 deg * The Forward Voltage tolerance is ±0.03V. ** Correlated color Temperature is derived from the CIE 1931Chromaticity diagram. *** The luminous intensity tolerance is ± 10%. PT30A02 V0 (5600K) - 2/16 -
Outline Dimension & Recommended Solder Pattern PT30A02 V0 (5600K) - 3/16 -
Pick-up Head Suggestion Symbol Definition Specification X1 the outside length of LED 2.7mm LED X2 the window length of LED 2.3m Y1 the outside width of LED 1.4mm Y2 the window width of LED 1.15mm X3 the outside length of Pick-up Head * TYPE I X4 the inside length of Pick-up Head * Y3 the outside width of Pick-up Head * Y4 the inside width of Pick-up Head * TYPE II D the outside diameter of Pick-up Head ** d the inside diameter of Pick-up Head ** * If use the Type I of pick-up head must accord with the following rule: 1.The outside length of Pick-up Head X3 must bigger than the window length of LED X2. 2.The inside length of Pick-up Head X4 must smaller than the outside length of LED X1. 3.The outside width of Pick-up Head Y3 must bigger than the window width of LED Y2. 4.The inside width of Pick-up Head Y4 must smaller than the outside width of LED Y1. ** If use the Type II of pick-up head must accord with the following rule: 1.The Pick-up Head outside diameter D must bigger than the width of LED Y1. 2.The Pick-up Head inside diameter d must smaller than the length of LED Y2. The suggestion pick-up head is as same as follow the Sketch Map. About the downward pressure of Pick-up Head, Please consult the Absolute Maximum Ratings. LED Sketch Map Pick-up Head Sketch Map PT30A02 V0 (5600K) - 4/16 -
Relative Spectrum Power Spectrum Distribution 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 370 420 470 520 570 620 670 720 770 Wavelength (nm) Forward Voltage vs. Forward Current PT30A02 V0 (5600K) - 5/16 -
Forward Current vs. Relative Luminous Intensity Ambient Temp. vs. Allowable Forward Current PT30A02 V0 (5600K) - 6/16 -
Radiation Pattern Absolute Maximum Ratings Ta=25 Parameter Symbol Rating Unit Reverse Voltage Vr 5 V Forward Current If 30 ma Power Dissipation Pd 110 mw Pulse Forward Current* I FP 100 ma Storage Temperature Ts -40 ~ +100 Operation Temperature Top -30 ~ +85 o C o C Electrostatic Discharge(HBM) ESD 500 V * Condition : 1/10 duty, 10 msec width. PT30A02 V0 (5600K) - 7/16 -
Temperature ( C) Temperature ( C) Surface Mounting Condition In the automatic mounting of the SMD LED to the PCB, any bending, expanding, and pulling forces against the SMD LED should be minimized to prevent the electrical failures or mechanical damaged. Reflow Soldering and Temperature Profile The SMD LED is designed for the reflow soldering process. Too high temperature or too large temperature gradient may cause the electrical and optical failures. Lead Solder 235 220 Peak Temp. 235 C Max 180 Gradual Cooling 150 Preheat Zone Soldering Zone 90 ~ 220 Sec 25 Sec Max. Time Lead Free Solder 260 Peak Temp. 260 C Max 10 Sec Max. 220 200 Gradual Cooling 160 Preheat Zone Soldering Zone 90 ~ 220 Sec 60 Sec Max. Time PT30A02 V0 (5600K) - 8/16 -
Reliability Test Items No Item Condition Time/Cycle Failure Criteria 1. High Temperature Operating Life 85 C, IF =20mA 2600 Hrs Note 1 2 Room Temperature Operating Life 60 C, IF = 20mA 2600 Hrs Note 1 3 Low Temperature Operating Life - 40 C, IF = 30mA 1000 Hrs Note 1 4 Wet High Temperature Operating 85 C/85%RH, IF = 20mA Life 1000 Hrs Note 1 5 High Temperature Storage Life 100 o C 1000 Hrs Note 1 6 Low Temperature Storage Life -55 o C 1000 Hrs Note 1 7 Powered Temperature Cycle 8 Non Operating Temperature Cycle 9 Non Operating Thermal Shock -40 C to 120 C,18min dwell,42min transfer (2hour cycle), 5 minutes ON/5 minutes OFF, IF = 30mA -40 C to 120 C, 15 minutes dwell/15 min transfer -40 C to 110 C, 20 minutes dwell, <10s transfer 1000 Cycle only for reference 1000 Cycle only for reference 500 Cycle Note 1 PT30A02 V0 (5600K) - 9/16 -
No Item Condition Failure Criteria 10 Mechanical Shock 11 Variable Vibration Frequency 12 Variable Vibration Frequency 13 Random Vibration 14 Solder Heat Resistance (SHR) 1500G, 0.5ms pulse, 5 shocks each 6 axis 10-2000-10Hz, log or linear sweep rate, 20G for approximately 1 minutes, 1.5mm, each applied three times per axis over 6 hours 10-55-10Hz, 1.5mm excursion, 552000Hz, 1 octave per min, 10G, three times per axis 6G RMS, 102000Hz, 10 minutes per axis Three Pbfree reflow solder profiles, included in JEDEC Level 1 tests Note 2 Note 2 Note 2 Note 2 Note 2 15 Autoclave 121 C, 100%RH, 15psig96 hours Note 2 MSL Precondition at 85 C and 85%RH 16 JEDEC Level 1 for 168 hours, followed Note 2 0 failures by three Pb free reflow solder profiles. First reflow needs to be completed between 15 minutes and 4 hours after 85C/85% 168 hour stress is completed. Note 2 Notes for Table: 1. A failure is an LED that is open, shorted, no longer light up, Vf shift >200mV, Luminous flux degradation (InGaN) >15%, or Forward or reverse leakage > 10 µa. 2. A failure is an LED that is open or shorted. PT30A02 V0 (5600K) - 10/16 -
Chromaticity Diagram Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT measured tolerance is ± 5%. PT30A02 V0 (5600K) - 11/16 -
Bin Rank x y x y C5601 B5601 A5600 B5602 0.336 0.357 0.323 0.336 0.345 0.348 0.332 0.327 0.341 0.343 C5602 0.329 0.322 0.332 0.352 0.320 0.331 0.336 0.357 0.323 0.336 0.332 0.352 0.320 0.331 0.341 0.343 0.329 0.322 0.338 0.338 D5602 0.325 0.317 0.329 0.347 0.316 0.326 0.332 0.352 0.320 0.331 0.329 0.347 0.316 0.326 0.338 0.338 0.325 0.317 0.335 0.333 E5602 0.322 0.311 0.326 0.342 0.313 0.320 0.329 0.347 0.316 0.326 0.326 0.342 0.335 0.333 0.332 0.327 0.323 0.336 0.326 0.342 PT30A02 V0 (5600K) - 12/16 -
Code Iv Code Vf B5 1870-1970 1 2.9 ~ 3.0 B6 1970-2070 2 3.0 ~ 3.1 B7 2070-2180 3 3.1 ~ 3.2 B8 2180-2290 4 3.2 ~ 3.3 B9 2290-2400 5 3.3 ~ 3.4 BA 2400-2550 6 3.4 ~ 3.5 BB 2550-2700 Bin code definition 2 B6 A5600 Chromaticity Rank Luminous Flux Rank Forward Voltage Rank PT30A02 V0 (5600K) - 13/16 -
K0 t1 B0 W F E Carrier Tape D P0 P2 B' P1 D1 A A' B - SEC.B-B' A0 + SEC.A-A' Unit : mm Item Spec Tol.(+/- ) Item Spec Tol.(+/- ) W 8.00 0.10 P2 2.00 0.05 E 1.75 0.10 P0 x 10 40.00 0.20 F 3.50 0.05 t1 0.23 0.05 D 1.50 +0.1,-0 A0 1.50 0.05 D1 1.00 0.10 B0 3.20 0.05 P0 4.00 0.10 K0 1.48 0.05 PT30A02 V0 (5600K) - 14/16 -
Reel Label Package USER REED DIRECTION Reel Diameter 7 inch (177.8mm) COVER TAPE Ø13.0 Lable POCKET TAPE Shielding Bag 7 inch Anti-Static Reel Max. 2500 pcs / reel Maximum 5 bags in 1 inner box LxWxH = 290x240x70 mm 5 inner box in one carton LxWxH = 390x310x260 mm PT30A02 V0 (5600K) - 15/16 -
Caution 1. Before open the package, should kept at 30 o C, 90% RH environment or less, The LED should be used within a year. 2. After open the package, the LED should be kept at 30 o C, 60 % RH environment or less. The LED should be soldered within 168 hours ( 7 days ) after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silica gel). 3. The SMD LED is an ESD sensitive device. All the equipment and machine must be properly grounded. 4. Applying proper resistor for the circuit design is recommended. Otherwise slight voltage shift may cause big current change and the LED may be burn out. 5. LED Pre-Bake Notice: After the package opening over 168 hrs in 30, 60% RH or less. LED should be baked at 70±5 / 24 hrs before using. Revision History Rev Major Change Since Last Revision Date 1 5600K Specification For Philips 2010/09/17 2 Bin table 2010/09/29 3 Modify bin table ESD 2011/01/03 PT30A02 V0 (5600K) - 16/16 -