SIOV metal oxide varistors Block varistors, Series/Type: B2, B0, B60, B80 Date: December 2007 Data Sheet EPCOS G 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS prior express consent is prohibited.
Construction Disk-shaped varistor element, potted in plastic housing Housing and potting flame-retardant to UL 9 V-0 Screw terminals M (SIOV-B2 0) Screw terminals M (SIOV-B60 80) Features Heavy-duty varistors (surge current capability up to 0 k) Wide operating voltage range 7 10 V RMS SIOV-B0 also available without housing (LS0 series) PSpice models pprovals UL CS ( K10) Delivery mode Cardboard box General technical data Climatic category to IEC 60068-1 0/8/6 Operating temperature to CECC 2 000 0 + 8 C Storage temperature 0 +1 C Electric strength to CECC 2 000 2. kv RMS Insulation resistance to CECC 2 000 MΩ Response time <2 ns Max. torque B2/B0 B60/B80 1.0 2. Nm Nm 2 11/07
Maximum ratings (T = 8 C) Ordering code Type V RMS V DC (8/20 µs) W max (2 ms) SIOV- V V J W B7220B070K001 B0K7 7 0 2000 190 1. B7222B011K001 B2K10 10 170 2000 2 1.2 B7220B011K001 B0K10 10 170 0000 1. B72260B011K001 B60K10 10 170 70000 90 1.6 B72280B011K001 B80K10 10 170 0000 660 2.0 B7222B011K001 B2K10 00 2000 20 1.2 B7220B011K001 B0K10 00 0000 60 1. B72260B011K001 B60K10 00 70000 70 1.6 B72280B011K001 B80K10 00 0000 800 2.0 B7222B021K001 B2K20 20 00 2000 00 1.2 B7220B021K001 B0K20 20 00 0000 60 1. B72260B021K001 B60K20 20 00 70000 70 1.6 B72280B021K001 B80K20 20 00 0000 1200 2.0 B7222B021K001 B2K20 20 20 2000 0 1.2 B7220B021K001 B0K20 20 20 0000 90 1. B72260B021K001 B60K20 20 20 70000 800 1.6 B72280B021K001 B80K20 20 20 0000 100 2.0 B7222B0271K001 B2K27 27 0 2000 60 1.2 B7220B0271K001 B0K27 27 0 0000 0 1. B72260B0271K001 B60K27 27 0 70000 860 1.6 B72280B0271K001 B80K27 27 0 0000 100 2.0 B7222B021K001 B2K20 20 20 2000 0 1.2 B7220B021K001 B0K20 20 20 0000 60 1. B72260B021K001 B60K20 20 20 70000 00 1.6 B72280B021K001 B80K20 20 20 0000 1600 2.0 B7222B081K001 B2K8 8 0 2000 0 1.2 B7220B081K001 B0K8 8 0 0000 800 1. B72260B081K001 B60K8 8 0 70000 1200 1.6 B72280B081K001 B80K8 8 0 0000 2000 2.0 Varistor elements without plastic housing (suitable for soldering) are available upon request. P max 11/07
Characteristics (T = 2 C) Ordering code V v (1 m) V V v (1 m) % v c, max (i c ) V i c C typ (1 khz) pf B7220B070K001 120 ± 220 00 100 B7222B011K001 20 ± 0 200 00 B7220B011K001 20 ± 0 00 600 B72260B011K001 20 ± 0 00 1000 B72280B011K001 20 ± 0 800 28000 B7222B011K001 20 ± 9 200 700 B7220B011K001 20 ± 9 00 800 B72260B011K001 20 ± 9 00 12000 B72280B011K001 20 ± 9 800 2000 B7222B021K001 60 ± 9 200 200 B7220B021K001 60 ± 9 00 200 B72260B021K001 60 ± 9 00 7900 B72280B021K001 60 ± 9 800 16000 B7222B021K001 90 ± 60 200 2200 B7220B021K001 90 ± 60 00 2900 B72260B021K001 90 ± 60 00 70 B72280B021K001 90 ± 60 800 1000 B7222B0271K001 0 ± 7 200 2000 B7220B0271K001 0 ± 7 00 2700 B72260B0271K001 0 ± 7 00 6600 B72280B0271K001 0 ± 7 800 1000 B7222B021K001 ± 80 200 1700 B7220B021K001 ± 80 00 200 B72260B021K001 ± 80 00 600 B72280B021K001 ± 80 800 100 B7222B081K001 620 ± 2 200 100 B7220B081K001 620 ± 2 00 1900 B72260B081K001 620 ± 2 00 600 B72280B081K001 620 ± 2 800 9000 11/07
Maximum ratings (T = 8 C) Ordering code Type V RMS SIOV- V V J W B7222B021K001 B2K20 20 60 2000 600 1.2 B7220B021K001 B0K20 20 60 0000 9 1. B72260B021K001 B60K20 20 60 70000 100 1.6 B72280B021K001 B80K20 20 60 0000 2200 2.0 B7222B01K001 B2K0 0 8 2000 60 1.2 B7220B01K001 B0K0 0 8 0000 90 1. B72260B01K001 B60K0 0 8 70000 180 1.6 B72280B01K001 B80K0 0 8 0000 20 2.0 B7222B061K001 B2K60 60 61 2000 660 1.2 B7220B061K001 B0K60 60 61 0000 00 1. B72260B061K001 B60K60 60 61 70000 160 1.6 B72280B061K001 B80K60 60 61 0000 200 2.0 B7222B01K001 B2K0 0 7 2000 620 1.2 B7220B01K001 B0K0 0 7 0000 960 1. B72260B01K001 B60K0 0 7 70000 100 1.6 B72280B01K001 B80K0 0 7 0000 0 2.0 B7222B0681K001 B2K680 680 89 2000 760 1.2 B7220B0681K001 B0K680 680 89 0000 10 1. B72260B0681K001 B60K680 680 89 70000 1800 1.6 B72280B0681K001 B80K680 680 89 0000 600 2.0 B7222B071K001 B2K70 70 970 2000 800 1.2 B7220B071K001 B0K70 70 970 0000 1200 1. B72260B071K001 B60K70 70 970 70000 2000 1.6 B72280B071K001 B80K70 70 970 0000 000 2.0 B72260B02K001 B60K00 1) 10 16 70000 000 1.6 B72280B0112K001 B80K10 10 16 0000 6000 2.0 V DC (8/20 µs) W max (2 ms) Varistor elements without plastic housing (suitable for soldering) are available upon request. P max 1) Operating voltage differs from type designation 11/07
Characteristics (T = 2 C) Ordering code V v (1 m) V v (1 m) v c, max (i c ) V % V pf B7222B021K001 680 ± 1120 200 100 B7220B021K001 680 ± 1120 00 1800 B72260B021K001 680 ± 1120 00 00 B72280B021K001 680 ± 1120 800 800 B7222B01K001 71 ± 1180 200 120 B7220B01K001 71 ± 1180 00 1700 B72260B01K001 71 ± 1180 00 0 B72280B01K001 71 ± 1180 800 80 B7222B061K001 70 ± 120 200 1200 B7220B061K001 70 ± 120 00 1600 B72260B061K001 70 ± 120 00 900 B72280B061K001 70 ± 120 800 7700 B7222B01K001 9 ± 100 200 00 B7220B01K001 9 ± 100 00 100 B72260B01K001 9 ± 100 00 00 B72280B01K001 9 ± 100 800 600 B7222B0681K001 10 ± 181 200 80 B7220B0681K001 10 ± 181 00 10 B72260B0681K001 10 ± 181 00 2600 B72280B0681K001 10 ± 181 800 200 B7222B071K001 1200 ± 2000 200 800 B7220B071K001 1200 ± 2000 00 00 B72260B071K001 1200 ± 2000 00 200 B72280B071K001 1200 ± 2000 800 800 B72260B02K001 1800 ± 2970 00 1600 B72280B0112K001 1800 ± 2970 800 200 i c C typ (1 khz) 6 11/07
Dimensions SIOV-B2/-B0 +1.0 _ 0. ±1 0±0. 2±1 M Weight Nominal diameter mm V RMS V Weight g 2 10 70 0 7 70 0 60 10 0 80 10 10 60 0±0. 60 +0. _ 0.7.±0.2 1±0. VR079-N SIOV-B60 72±1 9±1 M 0 +0. _ 2.0 +0.8 92 _ 1. ±1 ø7±0.2 0 +0. _ 0.7 ±0. ±1 8.±1 +0. 0 _ 2.0 7 _ +0.1 0. 2 _ +0. 0.7 VR080- SIOV-B80 96±1 9±1 M 27±0. +0. 118 _ 2.0 2.0 +0. 112 _ 6.8±0. 0±0. ø7±0.2 1. ±0.2 8±1 1.0 11±0.8 +0. 1 _ 2.0 +0.2 7 _ 0. 27.7±0. VR0298-B Dimensions in mm 7 11/07
Reliability data Test Test methods/ conditions Requirement Varistor voltage Clamping voltage The voltage between two terminals with the specified measuring current applied is called V v (1 m DC @ 0.2 2 s). The maximum voltage between two terminals with the specified standard impulse current (8/20 µs) applied. Max. DC operating voltage The maximum allowable DC operating voltage V DC at UCT +/ 0 C is applied for 00 ±8 h. The leakage current I leak (t) during test is recorded. Then the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of V v shall be measured. Surge current derating, 8/20 µs Fast temperature cycling surge currents (8/20 µs), unipolar, interval 60 s, amplitude corresponding to derating curve for impulses at 20 µs IEC 60068-2-1, test Na, LCT/UCT, dwell time 120 min, cycles Damp heat, steady state IEC 60068-2-78 The specimen shall be subjected to 0 ±2 C, 90 to 9% r. H. for 6 ±2 days with % of the maximum continuous DC operating voltage V DC. Then stored aoom temperature and normal humidity for 1 to 2 h. Thereafter, the change of V v shall be measured. To meet the specified value. To meet the specified value. I leak (t = 00 h) I leak (t = 0 h) V/V (1 m) % V/V (1 m) % (measured in direction of surge current) No visible damage V/V (1 m) % No visible damage V/V (1 m) % Note: UCT = Upper category temperature LCT = Lower category temperature 8 11/07
v/i characteristics v = f (i) for explanation of the characteristics refer = Leakage current for worst-case to General technical information, 1.6. B = Protection level varistor tolerances 20000 VR0296-L v V 000 8000 B 6000 000 2000 70 680 00 800 600 00 200 70 0 20 0 20 20 680 60 8 27 20 0 60 20 8 20 27 20 20 10 10 0 10 10 0 80 60 0 20 _ SIOV-B2K10 K70 _ 2 _ 1 0 1 2 i 9 11/07
v/i characteristics v = f (i) for explanation of the characteristics refer = Leakage current for worst-case to General technical information, 1.6. B = Protection level varistor tolerances 20000 VR02-X v V B 000 8000 6000 000 2000 70 680 00 800 600 00 200 0 80 60 70 0 20 20 20 10 10 7 0 680 60 8 27 20 10 0 20 8 20 20 10 10 7 60 27 20 10 0 0 20 - SIOV-B0K7 K70 - - -2-1 0 1 2 i 11/07
v/i characteristics v = f (i) for explanation of the characteristics refer = Leakage current for worst-case to General technical information, 1.6. B = Protection level varistor tolerances 20000 VR0297-T v V 000 8000 B 6000 000 2000 00 00 800 600 00 200 00 680 60 8 27 20 70 0 20 0 20 20 10 680 60 8 27 20 10 70 0 20 0 20 20 10 0 80 10 60 0 20 2 _ 1 0 1 2 SIOV-B60K10 K00 i 11 11/07
v/i characteristics v = f (i) for explanation of the characteristics refer = Leakage current for worst-case to General technical information, 1.6. B = Protection level varistor tolerances v 000 V 8000 7000 B VR01-Z 6000 000 000 000 2000 10 10 680 70 0 00 900 800 700 600 00 00 70 0 680 60 8 0 20 60 8 27 20 0 20 20 20 00 20 20 27 20 10 10 200 10 10 0 2 _ 1 0 1 2 SIOV-B80K10 K10 i 12 11/07
Derating curves Maximum surge current = f (, pulse train) For explanation of the derating curves refer to General technical information, section 1.8.1 VR0088-F 1x 2 2 6 1 0 1 2 SIOV-B2K10 K10 SIOV-B0K7 µs VR0089-N 1x 2 2 6 1 0 1 2 SIOV-B2K20 K60 µs 1 11/07
Derating curves Maximum surge current = f (, pulse train) For explanation of the derating curves refer to General technical information, section 1.8.1 VR0090-R 1x 2 2 6 1 0 1 2 SIOV-B2K0 K70 µs VR0091-Z 1x 2 2 6 1 0 1 2 SIOV-B0K10 K10 µs 1 11/07
Derating curves Maximum surge current = f (, pulse train) For explanation of the derating curves refer to General technical information, section 1.8.1 VR0092-8 1x 2 2 6 1 0 1 2 SIOV-B0K20 K60 µs VR009-G 1x 2 2 6 1 0 1 2 SIOV-B0K0 K70 µs 1 11/07
Derating curves Maximum surge current = f (, pulse train) For explanation of the derating curves refer to General technical information, section 1.8.1 VR009-P 1x 2 2 6 1 0 1 2 SIOV-B60K10 K10 µs VR009-X 1x 2 2 6 1 0 1 2 SIOV-B60K20 K60 µs 16 11/07
Derating curves Maximum surge current = f (, pulse train) For explanation of the derating curves refer to General technical information, section 1.8.1 VR0096-6 1x 2 2 6 1 0 1 2 SIOV-B60K0 K00 µs VR0069-9 1x 2 2 6 1 0 1 SIOV-B80K10 K10 2 µs t r 17 11/07
Cautions and warnings General 1. EPCOS metal oxide varistors (SIOVs) are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. 2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions.. For applications of SIOVs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. Storage 1. Store SIOVs only in original packaging. Do not open the package before storage. 2. Storage conditions in original packaging: Storage temperature: 2 C + C Relative humidity: <7% annual average, <9% on maximum 0 days a year. Dew precipitation: Is to be avoided.. void contamination of an SIOV s surface during storage, handling and processing.. void storage of SIOVs in harmful environments that can affect the function during long-term operation (examples given under operation precautions).. The SIOV type series should be soldered within the time specified: SIOV-S, -Q, -LS 2 months ETFV and SFS types 12 months. Handling 1. SIOVs must not be dropped. 2. Components must not be touched with bare hands. Gloves are recommended.. void contamination of the surface of SIOV electrodes during handling, be careful of the sharp edge of SIOV electrodes. Soldering (where applicable) 1. Use rosin-type flux or non-activated flux. 2. Insufficient preheating may cause ceramic cracks.. Rapid cooling by dipping in solvent is noecommended.. Complete removal of flux is recommended. 18 11/07
Mounting 1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic that will degrade the component s electrical characteristics. 2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components. Operation 1. Use SIOVs only within the specified temperature operating range. 2. Use SIOVs only within the specified voltage and currenanges.. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric conditions. void use in the presence of deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas, etc), corrosive agents, humid or salty conditions. void contact with any liquids and solvents. 19 11/07
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. s a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component.. The warnings, cautions and product-specific notes must be observed.. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the General Terms of Delivery for Products and Services in the Electrical Industry published by the German Electrical and Electronics Industry ssociation (ZVEI). 7. The trade names EPCOS, BOKE, lu-x, CeraDiode, CSSP, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDD, SIMID, SineFormer, SIOV, SIPD, SIPK, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 20 11/07