DIRCIONL CONROL olenoid Operted...ge 331 olenoid Controlled ilot Operted...ge 331 eries hockless ype...ge 331 ilot/mnully/mechniclly Operted...ge 331 oppet ype...ge 451 Check/ilot Controlled Check Vlves...ge 497 327
hese vlve re used for shifting oil flow direction of hydrulic circuit nd for ctutor strting/stopping s well s the operting direction shifting of ctutor. olenoid Operted 328
1. ype of Fluids ny type of hydrulic fluid, listed in the tle elow cn e used. DIRCIONL CONROL ydrulic Fluids ype of Fluids etroleum se Oils ynthetic Fluids 1) Wter Contining Fluids Remrks Use fluids equivlent to IO V32 or V46. Use phosphte ester or polyol ester type. When phosphte ester type fluid is to e used, prefix F- to the model numer ecuse specil sel (fluororuer) will e used. Use wter-glycol fluids or W/O emulsion type fluids. Notes 1: Not pplicle with -D nd -D series vlves. 2: For two types of mnully operted directionl vlves, DM- 06 nd DM- 10, only petroleum se oils 06X 10X nd polyol ester type fluids re ville. 3: Wter-glycol fluids cnnot e used for two types of solenoid operted poppet type two-wy vlves; CD- 03 nd CD-03 types. 4: For use with hydrulic fluids other thn those listed ove, plese consult your Yuken representtives is dvnce. 2. Recommended Viscosity nd Oil empertures Use hydrulic fluids which stisfy the oth recommended viscosity nd oil tempertures given in the tle elow. D-005 series olenoid Operted Nme Viscosity Oil emperture olenoid Operted olenoid Controlled ilot Operted oppet ype olenoid Operted Multi urpose Control Vlves olenoid Operted oppet ype wo-wy Vlves ilot Controlled Mnully Operted Mechniclly Operted Check Vlves ilot Controlled Check Vlves eries hockless ype olenoid Operted (hifting ime djustle) 20 200 mm 2 /s (100 900 U) 15 400 mm 2 /s (80 1800 U) 15 200 mm 2 /s (80 900 U) 15 +60 C (5 140 F) 15 +70 C (5 160 F) 15 +60 C (5 140 F) 3. Control of Contmintion Due cution must e pid to mintining control over contmintion of the hydrulic fluids which my otherwise led to rekdowns nd shorter the life of the vlve. lese mintin the degree of contmintion within N 1638-rde 12. Use 25 µm or finer line filter (In cse of D-005 series olenoid Operted, N1638-rde 11. Use 20 µm or finer line filter). 329
Wter-proof, dust-proof nd virtion-resistnce here properties re in complince with the following stndrds. (he mrking of indictes complince) Item tndrd ype Description 2 Wter-proof Dust-proof Virtionresistnce JI F8001 Wter-proof test for mrine electric pplince JI D0203 Dmp-proof nd Wter-proof test for utomoile prts JI C0920 Wter-proof test for electromechnicl prts n wiring mterils (I..C) UL. 529 (I..C) UL. 529 JI C0911 Virtion test for smll electric pplinces JI D1601 Virtion test for utomoile prts Clss 1 wter spry Clss 2 wter spry Dmp-proof test M1 Dmp-proof test M2 plsh-proof test R1 plsh-proof test R2 Drip-proof type Rin-proof type Froth-proof type Jet-flow proof type rotection Clss 2: Drip-proof type (2) rotection Clss 3: Rin-proof type rotection Clss 4: Froth-proof type rotection Clss 5: Jet-flow proof type rotection Clss 6 Resonce test (IC) Fixed frequency resistnce test (IIC) Vrile frequency resistnce test (IIIC) Clss 1: minly for prts of pssenger cr Drip-proof construction Froth-roof construction est to exmine dmp-resistnce of prts est to exmine functions of prt under high temperture nd high humidity est to exmine functions of prts which re likely to e exposed to wter splsh. est to exmine functions of prts which re indirectly exposed to stormy wether or wter splsh. Not ffected y wter dropping t verticl ngle of 15 degrees or less. Not ffected y rin fll t verticl ngle of 60 degrees or less. Not ffected y wter drip from ny dirction. Not ffected y jet flow from ny direction. Not ffected y wter drip flling t verticl ngle of 15 degrees or less. Not ffected y rin flling t verticl ngle of 60 degrees or less. Not ffected y wter drip from ny direction. Not ffected y jet flow from ny direction. Fully protected from entry of dust. Virtion rnge: 7-59.5 z Duplex mplitude: 0.1 mm rde 1: duplex mplitude-0.5 mm rde 2: duplex mplitude-1.2 mm Frequence: 20 z rde 3: duplex mplitude-1.8 mm rde 4: duplex mplitude-2.4 mm rde 1: duplex mplitude-0.3 mm Frequency rnge: 7-59.5 z rde 2: duplex mplitude-0.5 mm rde 3: duplex mplitude-0.75 mm rde : rts mounted on spring of ody or chssis hving reltively low virtion. rde : rts mounted on spring of ody or chssis hving reltively low virtion. rde C: rts mounted in engine hving reltively low virtion D-005 (-/-/L-)D-01 D-01 D-03 (-)D-04 (-)D-06 (-)D-10 Complince -D-01 (-/-/-/L-) D-03 : No-spring detented type (2D ) nd No-spring type (2N ) cn e used when energised continous for position holding. 2 : For outdoor use, protect equipment with cover, etc., to prevent direct exposure to wter. -D-01 -D-03 -D-04 -D-06 DL DL D CD 330
olenoid Operted olenoid Controlled ilot Operted eries hockless ype ilot / Mnully / Mechniclly Operted Vlve ype rphic ymols Mx. Operting ressure M (I) Mximum Flow U..M.3.5 1 2 5 10 20 50 100 200 500 1000 1 2 5 10 20 50 100 200 500 10002000 5000 L/min ge D 005 336 olenoid Operted 16 (2320) 35 (5080) 16 (2320) L D 01 D 01 D 01 L D 03 D 03 344 361 Low Wttge (5W) ype Dolenoid Operted 16 (2320) D 03 D 01 D 03 378 lectronic Rely Incorported olenoid Operted 35 (5080) D 01 D 01 D 03 D 03 379 379 21 (3050) D 01 olenoid Controlled ilot Operted Directionl Vlve Y D 03 D 04/ D 04 D 06/ D 06 381 eries hockless ype olenoid Operted eries hockless ype olenoid Controlled ilot Operted Y D 10/ D 10 D 01 D 03 D 04 D 06 412 418 ilot Operted X Y D 04 06 10 423 Mnully Operted 21 (3050) hreded Connection (DM 03 06 10 DM 01 03 04 06 10 429 Mechniclly Operted 7 (1020) Rotry (DR ) 02 Cm Operted (DC ) 01 03 441 331
pool ypes pool types re clssified to the condition of flow t the neutrl position. pool ype rphic ymols chemtic Drwing (Centre osition) Functions nd pplictions 2 Closed Centre ll orts olds pump pressure nd cylinder position t neutrl. Cre should e pid if used s 2-position type ecuse shock occurs when ech port is locked in trnsit. 3 Open Centre ll orts ump cn e unloded nd ctutor is floting t neutrl. If 2-position type is used, shock is reduced s ech ports is relesed to tnk in trnsit. 4 (Open Centre, &) 40 Open Centre, & Restricted Flow 5 (Open Centre, &) ump pressure is held nd ctutor is floted t neutrl. 2-position type is used when system pressure is required to e held in trnsit. hock during trnsit is less compred to spool type 2. In vrition of spool type 4, restrictor is provided in - nd - ports. Mking it fster t stopping the ctutor. It cn e used when pump is unloding t neutrl nd ctutor is hlted t one wy flow. 6 Open Centre & Closed Crossover ump is unloding nd ctutor position held t neutrl. uitle for series opertion. 60 Open Centre & Open Crossover It is vrition of spool type 6. hock is reduced s ech port is relesed to tnk on trnsit. 7 Open Centre ll orts Restricted Flow 8 (2-Wy) 9 (Open Centre, &) 10 (Open Centre &) 11 (Open Centre &) 12 (Open Centre &) Minly used s 2-position type. hock is reduced on trnsit. ump pressure nd cylinder position is held t neutrl in the sme wy s spool type 2. It is used s 2 wy type. Regenertive circuit is provided t neutrl. revent ctutor from one direction drift y lekge of port t neutrl. lt ctutor movement positively t, ports locked, ports connected t neutrl. revent ctutor from one direction drift y lekge of port t neutrl. 332
DIRCIONL CONROL Mounting urfce Mounting surfce dimensions conform to IO 4401, ydrulic fluid power-four-ort directionl control vlves- Mounting surfces. ( L Model Numers ) D 01 D 01 DM 01 DC 01 ( L DM 03 DC 03 ) D 03 D 03 D 04 D 04 DM 04 ( ) D 06 D 06 DM 06 ( ) D 10 D 10 DM 10 IO Code of Mounting urfce IO 4401 03 4 IO 4401 C 05 4 IO 4401 C 05 4 IO 4401 D 07 4 IO 4401 08 4 IO 4401 F 10 4 he min port conform to the IO 4401 C 05 4. he pilot nd drin ports is sccordnce with the IO originl drft. Interchngeility in Instlltion etween Current nd New Design Model chnge hs een mde on the following product. he difference etween current nd new design hs een descried on the prgrph of Interchngeility in Instlltion etween Current nd New Design. Refer to relevnt pges on ech series. Nme D 005 eries olenoid Operted D 01 eries olenoid Operted 1/8,3/8 olenoid Controlled ilot Operted Directionl Vlves 1/2 olenoid Controlled ilot Operted Directionl Vlves 3/4,1 1/4 olenoid Controlled ilot Operted Directionl Vlves Currrent Model Numers New D 005 40/4090 D 005 30/3090 D 005 N 40/4090 N1 L ( D 01 60/6090 ) ( L D 01 70/7090 ) D 01 13/1390 D 03 13/1390 D 01 14/1490 D 03 14/1490 ( ) D 04 51/5190 ( ) D 04 52/5290 ( ) D 06 52/5290 ( ) D 06 53/5390 ( ) D 10 42/4290 ( ) D 10 43/4390 Interchngeility in Instlltion Relted ge 357 Mjor Chnges igh Flow Low ressure Drop Din-connector type solenoid in ddition igh ressure nd igh Flow Low ressure Drop ilot vlve hs een chnged from D-01, 60 design to 70 design. ilot vlve hs een chnged from D-01, 60 design to 70 design. ilot vlve hs een chnged from D-01, 60 design to 70 design. 333
olenoid Operted / olenoid Controlled Operted WID RN OF MODL Choose the optimum vlve to meet your needs from lrgeselection ville. 1100 (291) : igh res., igh Flow, Low res. Drop ype ( )D 10 : hockless ype : hockless ype [hifting ime djustle] Mximum Flow L / min (U..M) 500 (132) 300 (79.3) 250 (66.1) 160 (42.3) 120 (31.7) 100 (26.4) 80 (21.1) 63 (16.6) 40 (10.6) 30 (7.9) : Low ressure Drop ype : Low Wttge ype D 03 L-D-03 [60 L/min (15.9 U..M)] D 01 D 01 D 01 D 06 D 03 D 04 ( )D 06 ( )D 04 D 03 D 03 D 03 D 01 D 01 D 01 15 (4.0) D 005 0 16 (2320) 21 (3050) 25 (3630) 31.5 (4570) 35 (5080) ressure M (I) 334 olenoid Operted / olenoid Controlled Operted
DIRCIONL CONROL Instructions Mounting D-005 No mounting restrictions for ny model. -D-01 -D-03 No-spring detented models not energised continuously must e instlled so tht the spool xis L-L is horizontl. Otherwise there is no mounting restrictions. L L -D-01/03 D-01 D-03 (-) D-04 (-) D-06 (-) D-10 No-spring models not energised continuously must e instlled so tht the spool xis L-L is horizontl. Otherwise there is no mounting restrictions. L L, nergistion 1. No-pring ype One of two solenoids should e energised continuously to void mlfunction. 2. On doule solenoid vlves do not energise oth t the sme time s it will result in coils urning out. Vlve nk ort void connecting the vlve tnk port to line with possile surge pressure. iping end of tnk line should e sumerged in oil. ilot Drin ort for olenoid Controlled ilot Operted Vlve void connecting the vlve pilot drin port to line with possile surge pressure. iping end of drin should e sumerged in oil. hockless ype In order to enefit from shockless opertion, it is necessry to fill the tnk line with operting oil. Only fter the tnk line hs een filled with operting oil should the vlve e used on regulr sis. Operting Force e Mnul ctutor ke cre s the operting force y the mnul ctutor increses in proportion to the tnk line ck pressure. (ee the grph right.) olenoid olenoid connector (DIN connector) he solenoid connector is in ccordnce with the interntionl stndrd IO 4400 (Fluid power systems nd components-hree-pin electricl plug connectors- Chrcteristics nd requirements). C olenoid 50-60 z common service solenoids do not require rewiring when the pplied frequency is chnged. DC olenoid ( -series olenoid Operted Directionl Vlve) hese vlves differ from conventionl DC solenoid operted directionl vlves nd hve the following chrcteristics: 1. he sprk etween the rely contcts hs een eliminted nd therefore the vlve cn e operted y miniture relys. 2. he surge voltge is pproximtely 10 % of tht normlly experienced. 3. ime lg on de-energistion is reduced y pproximtely 50 %. Operting Force 30 lf. N 150 20 10 0 100 50 0 -D except for D-005 D-005 1 2 3 4 M 0 100 200 300 400 500 nk Line ck ressure R type Models with Current Rectifier nd DC olenoid pecilly designed DC solenoid nd receptcle (or connector) contining C-DC rectifier nd trnsient pek suppressor re provided. Connection to e mde to C power source s with conventionl C solenoid. Remrkly high reliility nd long life nd other dvntges including quiet vlve opertion. No overheting of coil due to the spool sticking nd protection ginst trnsient voltge peks re ssured. RQ type Models with Current rectifier nd Quick Return olenoid Vlve chrcteristics re identicl to R type except for the fst return time of the spool fter deenergistion. Insultion Clss of olenoid Model numers D-005, D-01, -D01 L-D-01, -D-01, -D-01 D-03, -D-03, L-D-03 -D-03, -D-03 D-01/03/04/06/10, -D-04/-06/10 -D-01, -D-03 Insultion Clss Clss Clss F I olenoid Operted / olenoid Operted Controlled olenoid Operted / olenoid Controlled Operted 335