Stard Trunnion Line HAWK TECHNOLOGY LTD. Going Beyond Everyday Hawk Technology Ltd has evolved with today's manufacturing requirements by planning, designing, building installing state-of -the-art robotic integration tooling solutions around the world. Whether it is one piece of tooling or an entire manufacturing facility, our highly knowledgeable experienced staff works with our clients to exceed industry stards by providing the best in design, program management, manufacturing services. Our entire team is committed to forming strategic partnerships with clients requiring total technical manufacturing services. With access to everything we need under one roof design, fabrication, engineering, service more we can respond to our clients' needs every day. We challenge ourselves to go beyond the minimum add value to our solutions, our process our deliverables. Hawk Technology Ltd is the One Source for Integrated Manufacturing Solutions. 8080 Centennial Expressway Rock Isl, IL 60-736 Tel: 309.787.600 www.hawktechnology.com
MANUAL TRUNNION SET - LOCK PIN INDEXING Max Radial Load Manual Head HT-TRLP-XX Manual Lock Pin- 3000 lb (6000 lb w/ tail stock) Tail HT-TRT-XX 3000 lb (6000 lb w/ head stock) XX = Specify floor to centerline height. Stard Sizes: 34" or 40" We manufacture export a comprehensive range of trunnions that are produced using the latest technology. Our range trunnions of trunnions are globally is globally accepted accepted for their for excep- its exceptional quality, quality, sophisticated sophisticated engineering engineering high high efficiency. efficiency. Our manual trunnion comes stard with a base frame, tilt head stock, slewing ring lock pin. Need a customized trunnion, we can help. Call us for additional information MANUAL LOCK PIN HEAD STOCK TAIL STOCK
CANTILEVER TRUNNIONS Max Max Radial Radial Load / Load Moment / Moment Load Thru Load Hole Powered Head HT-TRCPO-XX Offset Motor- Planetary Powered Gearbox 3000 lb / 800 ft-lb HT-TRCPO-XX Offset Motor- Planetary 3000 lb / 800 Head Gearbox ft-lb Manual Head HT-TRCLP-XX Manual Lock Pin- Manual 3000 lb / 4400 ft-lb Head HT-TRCLP-XX Manual Lock 3000 lb / 4400 Pin- ft-lb Max Pressure Max Pressure Rating Rating HT-TR-HS 3 Hydraulic - Dual Supply HT-TR-HS 3 Hydraulic Feed - Assembly Supply Dual Feed HT-TR-PS 3 Pneumatic - Single Assembly HT-TR-PS 3 Pneumatic Feed - Single Feed XX = Specify floor to centerline height. Stard Sizes: 34" or 40" XX = Specify floor to centerline height. Stard Sizes: 34" or 40" < Arc-Min Backlash; Rotational Torque: 700 ft-lbs w/ hp motor 60 < Hz Arc-Min w/ 460VAC Backlash; -- Motor Rotational = 800 Torque: -- Output 700 ft-lbs at 58: w/ gearbox hp motor = 7 60 Hz 50 w/ Hz 460VAC w/ 400VAC -- Motor -- Motor = 800 = 500 -- Output -- Output at at 58: 58: gearbox gearbox = 7 5.8 50 Hz w/ 400VAC -- Motor = 500 -- Output at 58: gearbox = 5.8 3 3 Designed for mounting to motor plate of offset powered trunnion styles Designed for mounting to motor plate of offset powered trunnion styles We manufacture export a comprehensive range of trunnions that are produced using We manufacture the latest technology. export Our a comprehensive range of trunnions range is of globally trunnions accepted that are for produced its exceptional using the quality, latest technology. sophisticated Our engineering trunnions are globally high efficiency. accepted Our for their Manual exceptional quality, sophisticated engineering high efficiency. Trunnion comes stard with a base frame, slewing ring lock pin. Our Powered Trunnion with offset motor comes stard with a base frame, offset Our Manual gearbox, motor, control Trunnion panel comes stard a push with button a base operator frame, control slewing unit. ring It can also lock pin. be ordered Our Powered with an optional wireless Trunnion pendant with offset or with motor PLC/HMI comes controls. stard In addition, with a base it can frame, be ordered offset gearbox, with optional motor, Hydraulic control panel - Dual Feed a or push Pneumatic button operator control - Single Feed. unit. It can also be ordered with an optional wireless pendant or with PLC/HMI controls. In addition, it can be ordered with optional Hydraulic - Dual Need Feed or customized Pneumatic - trunnion, Single Feed. we can help. Call us for additional information current Need a pricing. customized trunnion, we can help. Call us for additional information OFFSET POWERED CANTILEVER HEAD STOCK MANUAL LOCK PIN CANTILEVER HEAD STOCK
POWERED TRUNNION SET - OFFSET MOTOR Max Radial Part Number Style Max Radial Thru Description Part Number Style Load Thru Description Load Hole Hole Powered Head HT-TRPO-XX Offset Motor Planetary 3000 lb (6000 Powered Head HT-TRPO-XX Offset -Pivot Motor Head Planetary Gearbox 3000 lb (6000 lb w/tail stock) - Gearbox lb w/tail stock) 3000 lb (6000 Tail HT-TRT-XX 3000 lb (6000 Tail HT-TRT-XX lb w/head lb w/head stock) Max stock) Pressure Max Rating Pressure Rating HT-TR-HS 3 Hydraulic - HT-TR-HS 3 Hydraulic - Dual Feed Supply Assembly Dual Feed Supply Assembly HT-TR-PS 3 Pneumatic - HT-TR-PS 3 Pneumatic - Single Feed Single Feed XX = Specify floor to centerline height. Stard Sizes: 34" or 40" XX = Specify floor to centerline height. Stard Sizes: 34" or 40" < Arc-Min Backlash; Rotational Torque: 700 ft-lbs w/ hp motor 60 Hz < w/ Arc-Min 460VAC Backlash; -- Motor Rotational = 800 Torque: -- Output 700 at ft-lbs 58: w/ gearbox hp motor = 7 50 60 Hz Hz w/ w/ 400VAC 460VAC -- -- Motor = 500 800 -- -- Output at at 58: gearbox = 5.8 7 503 Designed Hz w/ 400VAC for mounting -- Motor to = motor 500 plate of -- offset Output powered at 58: trunnion gearbox styles = 5.8 3 Designed for mounting to motor plate of offset powered trunnion styles We manufacture export a comprehensive range of trunnions that are produced using We manufacture export a comprehensive range of Trunnions that are produced using latest technology. Our range of trunnions is globally accepted for its the latest technology. Our trunnions are globally accepted for their exceptional quality, sophisticated engineering high efficiency. exceptional quality, sophisticated engineering high efficiency. Our Powered Trunnion with offset motor comes stard with a base frame, tilt head stock, offset gearbox, Our Powered motor, Trunnion control with panel offset motor a comes push button stard operator with a base control frame, unit. tilt It head can stock, also offset gearbox, motor, control panel a push button operator control unit. It can also be ordered with an optional second push button operator control unit for the tail be ordered with an optional second push button operator control unit for the tail stock, stock, wireless pendant or with PLC/HMI controls. In addition, it can be ordered wireless pendant or with PLC/HMI controls. In addition, it can be ordered with optional Hydraulic optional - Dual Feed Hydraulic or Pneumatic - Dual Feed - Single or Pneumatic Feed. - Single with Feed. Need a customized trunnion, we we can can help. help. Call Call us for us additional for additional information information current pricing. OFFSET POWERED HEAD STOCK TAIL STOCK
AXIS POWER LIFT TRUNNION SET - PANELED Max Radial Load Offset Motor- Planetary Head HT-TRLR-XX -XX 3 Gearbox Tail 7,000 lb at 30" Maximum Length XX = Specify minimum floor to centerline height in " increments; Range: 3" - 48" 3 XX = Travel distance < Arc-Min Backlash; Rotational Torque: 8600 in-lbs w/ hp motor We manufacture export a comprehensive range of trunnions that are produced using range the of trunnions latest technology. that are produced Our trunnions using are the globally accepted for their exceptional latest quality, technology. sophisticated Our trunnions engineering are globally high efficiency. accepted for their exceptional quality, sophisticated The Power engineering Lift Trunnion high comes efficiency. with a single axis head tail set with powered elevation. It will provide a single axis of powered 360 Degrees vertical rotation. The system The Power will also Lift Trunnion provide 36 comes inches with (94mm) a single of powered elevation. axis head tail set with powered elevation. It Hollow will provide bore a gear single boxes axis are of powered utilized to 360 allow Degrees the use of pneumatics, electrical controls, or vertical weld ground rotation. directly The system to the tool will also provide 36 inches elevation (94mm) control of powered on this elevation. trunnion will be by a four button push button does not inhibit rotational capability. Rotation station Hollow mounted bore gear on boxes the head are utilized stock end to allow of the the fixture. use of An pneumatics, optional Programmable electrical controls, or control capability weld ground (shown directly above) to the is available, tool does which not includes inhibit rotational color touch capability. screen interface for programming with a wireless pendant control. Rotation elevation control on this trunnion will be by a four button push button In station addition mounted to the on stard the head safety stock features, end of the additional fixture. safety An optional features Programmable have been added control to capability protect the (shown operator above) during is available, automated which movements. includes color These touch include screen area interface for scanners with programming programmable with a fields, wireless pendant a hydraulic control. safety system using a hydraulic cylinder with counterbalance valve, flow controls accumulator. In addition to the stard safety features, additional safety features have been Need added a to customized protect the trunnion, operator we during can automated help. Call us movements. for additional These information include area scanners with programmable fields, a hydraulic safety system using a hydraulic cylinder with counterbalance valve, flow controls accumulator. Need a customized trunnion, we can help. Call us for additional information
3 AXIS POWER LIFT TRUNNION SET - PANELED Max Radial Load Head Tail Drop HT-TRLR-XX -XX 3 HT-TRDC-XX 4 Offset Motor- Offset Motor Fixed Head Planetary Gearbox 7,000 lb - Drop Weight at 30" Maximum Length Max Moment Load We manufacture export a comprehensive range of trunnions that are produced using the latest technology. Our trunnions are globally accepted for their exceptional quality, sophisticated engineering high efficiency. The Power Lift Trunnion comes with a single axis head tail set with powered elevation. It will provide a single axis of powered 360 Degrees vertical rotation. The system will also provide 36 inches (94mm) of powered elevation. The third axis tool provides even more flexibility control by adding powered 360 Degrees horizontal rotation. Hollow bore gear boxes are utilized to allow the use of pneumatics, electrical controls, or weld ground directly to the tool does not inhibit rotational capability. Rotation elevation control on this trunnion will be by a four button push button station mounted on the head stock end of the fixture. An optional Programmable control capability (shown above) is available, which includes color touch screen interface for programming with a wireless pendant control. In addition to the stard safety features, additional safety features have been added to protect the operator during automated movements. These include area scanners with programmable fields, a hydraulic safety system using a hydraulic cylinder with counterbalance valve, flow controls accumulator. Need a customized trunnion, we can help. Call us for additional information Planetary Gearbox 8,00 in-lb XX = Specify minimum floor to centerline height in " increments; Range: 3" - 48" 3 XX = Travel distance 4 XX = Length of base, head stock to tail stock < Arc-Min Backlash; Rotational Torque Head : 800 in-lbs w/ hp motor Rotational Torque Drop : 7,700 in-lbs w/ hp motor