The synchronous machine (SM) in the power system (2) (Where does the electricity come from)?

Similar documents
SCHOOL OF ELECTRICAL, MECHANICAL AND MECHATRONIC SYSTEMS. Transient Stability LECTURE NOTES SPRING SEMESTER, 2008

From now, we ignore the superbar - with variables in per unit. ψ ψ. l ad ad ad ψ. ψ ψ ψ

Introduction to Synchronous. Machines. Kevin Gaughan

Dynamics of the synchronous machine

Synchronous Machines

Generators. What its all about

LESSON 20 ALTERNATOR OPERATION OF SYNCHRONOUS MACHINES

ECE 325 Electric Energy System Components 7- Synchronous Machines. Instructor: Kai Sun Fall 2015

Simulations and Control of Direct Driven Permanent Magnet Synchronous Generator

You know for EE 303 that electrical speed for a generator equals the mechanical speed times the number of poles, per eq. (1).

Chapter 4. Synchronous Generators. Basic Topology

An Introduction to Electrical Machines. P. Di Barba, University of Pavia, Italy

The Operation of a Generator on Infinite Busbars

Equivalent Circuits with Multiple Damper Windings (e.g. Round rotor Machines)

3 d Calculate the product of the motor constant and the pole flux KΦ in this operating point. 2 e Calculate the torque.

JRE SCHOOL OF Engineering

Synchronous Machines

Chapter 9: Transient Stability

ECE 585 Power System Stability

EE 742 Chapter 3: Power System in the Steady State. Y. Baghzouz

Synchronous Machines

Control of Wind Turbine Generators. James Cale Guest Lecturer EE 566, Fall Semester 2014 Colorado State University

Lesson 17: Synchronous Machines

Comparative Study of Synchronous Machine, Model 1.0 and Model 1.1 in Transient Stability Studies with and without PSS

CHAPTER 2 DYNAMIC STABILITY MODEL OF THE POWER SYSTEM

QUESTION BANK ENGINEERS ACADEMY. Power Systems Power System Stability 1

Power System Stability GENERATOR CONTROL AND PROTECTION

The synchronous machine (detailed model)

ECE 421/521 Electric Energy Systems Power Systems Analysis I 3 Generators, Transformers and the Per-Unit System. Instructor: Kai Sun Fall 2013

Understanding the Inductances

Symmetrical Components Fall 2007

University of Jordan Faculty of Engineering & Technology Electric Power Engineering Department

Doubly salient reluctance machine or, as it is also called, switched reluctance machine. [Pyrhönen et al 2008]

INDUCTION MOTOR MODEL AND PARAMETERS

Final Exam, Second Semester: 2015/2016 Electrical Engineering Department

Modeling Free Acceleration of a Salient Synchronous Machine Using Two-Axis Theory

Synchronous machine with PM excitation Two-axis model

Dynamic Behavior of Three phase Inductions Motors as Loads in an Electric Power System with Distributed Generation, a Case of Study.

Outcome of this lecture

Generators for wind power conversion

Generation, transmission and distribution, as well as power supplied to industrial and commercial customers uses a 3 phase system.

ECE 422/522 Power System Operations & Planning/Power Systems Analysis II : 7 - Transient Stability

6.061 / Introduction to Electric Power Systems

Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science Electric Machines

Mathematical Modelling of an 3 Phase Induction Motor Using MATLAB/Simulink

POWER SYSTEM STABILITY

Three Phase Circuits

Power System Stability and Control. Dr. B. Kalyan Kumar, Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India

EEE3405 ELECTRICAL ENGINEERING PRINCIPLES 2 - TEST

EFFECTS OF LOAD AND SPEED VARIATIONS IN A MODIFIED CLOSED LOOP V/F INDUCTION MOTOR DRIVE

Chapter 5 Three phase induction machine (1) Shengnan Li

Chapter 3 AUTOMATIC VOLTAGE CONTROL

ROEVER COLLEGE OF ENGINEERING & TECHNOLOGY ELAMBALUR, PERAMBALUR DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING ELECTRICAL MACHINES I

Unified Torque Expressions of AC Machines. Qian Wu

The Effects of Machine Components on Bifurcation and Chaos as Applied to Multimachine System

Electrical Machines and Energy Systems: Operating Principles (Part 1) SYED A Rizvi

Analysis of Bifurcations in a Power System Model with Excitation Limits

Predicting, controlling and damping inter-area mode oscillations in Power Systems including Wind Parks

Parameter Sensitivity Analysis of an Industrial Synchronous Generator

Damping SSR in Power Systems using Double Order SVS Auxiliary Controller with an Induction Machine Damping Unit and Controlled Series Compensation

1 Unified Power Flow Controller (UPFC)

A Computer Application for Power System Control Studies

ECEN 667 Power System Stability Lecture 18: Voltage Stability, Load Models

Torques 1.0 Two torques We have written the swing equation where speed is in rad/sec as:

A Power System Dynamic Simulation Program Using MATLAB/ Simulink

Electrical Machines and Energy Systems: Operating Principles (Part 2) SYED A Rizvi

Examples of Applications of Potential Functions in Problem Solving (Web Appendix to the Paper)

Voltage Deviation of Wind Power Generation due to Wind Velocity Change

Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science

Transient Stability Analysis of Single Machine Infinite Bus System by Numerical Methods

Open Conductor Faults and Dynamic Analysis of a Power System

Synchronous Machines - Structure

CHAPTER 3 SYSTEM MODELLING

(a) Torsional spring-mass system. (b) Spring element.

Proceedings of the 6th WSEAS/IASME Int. Conf. on Electric Power Systems, High Voltages, Electric Machines, Tenerife, Spain, December 16-18,

A. P. Sakis Meliopoulos and George J. Cokkinides Power System Relaying, Theory and Applications. Chapter 8 2 Generator Protection 2

EE 451 Power System Stability

Frequency and Damping Characteristics of Generators in Power Systems

Mitigating Subsynchronous resonance torques using dynamic braking resistor S. Helmy and Amged S. El-Wakeel M. Abdel Rahman and M. A. L.

CPPM Mahine: A Synchronous Permanent Magnet Machine with Field Weakening

Nonlinear Electrical FEA Simulation of 1MW High Power. Synchronous Generator System

Transient Stability Analysis with PowerWorld Simulator

Lecture (20) DC Machine Examples Start of Synchronous Machines

Modeling of Hydraulic Turbine and Governor for Dynamic Studies of HPP

Self-Tuning Control for Synchronous Machine Stabilization

Loss analysis of a 1 MW class HTS synchronous motor

Step Motor Modeling. Step Motor Modeling K. Craig 1

Dynamic d-q Model of Induction Motor Using Simulink

Prince Sattam bin Abdulaziz University College of Engineering. Electrical Engineering Department EE 3360 Electrical Machines (II)

ECEN 460 Exam 1 Fall 2018

Steady State Modeling of Doubly Fed Induction Generator

Motor-CAD combined electromagnetic and thermal model (January 2015)

Electric Machines I Three Phase Induction Motor. Dr. Firas Obeidat

Dynamic Modeling of Surface Mounted Permanent Synchronous Motor for Servo motor application

POWER SYSTEM STABILITY AND CONTROL

MODELING AND HIGH-PERFORMANCE CONTROL OF ELECTRIC MACHINES

THE UNIVERSITY OF NEW SOUTH WALES. School of Electrical Engineering & Telecommunications FINALEXAMINATION. Session

Concept Design and Performance Analysis of HTS Synchronous Motor for Ship Propulsion. Jin Zou, Di Hu, Mark Ainslie

Synergetic Control for Electromechanical Systems

DESIGNING POWER SYSTEM STABILIZER WITH PID CONTROLLER

Transcription:

1 The synchronous machine (SM) in the power system (2) (Where does the electricity come from)?

2 Lecture overview Synchronous machines with more than 2 magnetic poles The relation between the number of poles and rotation speed The magnetic field in the SM Circuit model for a SM and power when we have a salient pole rotor Introduction to the dynamics of machines Photos of practical SM s

3 3 phase, 2 pole synchronous machine Rotor A round rotor Stator

4 A 3 phase, 2 pole generator Rotor windings (or field windings) for Direct current with direction into the figure The stator windings for phase a with direction into the figure Rotor windings (or field windings) for Direct current with direction out of the figure A salient pole rotor The rotor The stator Magnetic poles, N and S The stator windings for phase -a with direction out of the figure

5 A 3 phase, 4 pole generator Rotor windings (or field windings) for Direct current with direction into the figure A salient pole rotor -a c b -b -c N S Rotor Stator The stator windings for phase a with direction into the figure a -c b S -a N c -b a Magnetic poles, N and S Rotor windings (or field windings) for Direct current with direction out of the figure The stator windings for phase a with direction out of the figure

6 A 3 phase, 6 pole machine We have and increased number of poles both on the rotor and stator

7 f e Speed of rotation and number of poles p p n p = f n m = = 2 2 60 120 ω m = 2 ωe p f e = 50 Hz f e = 60 Hz Legend: ω e = Electrical radians ω m = Mechanical radians f e = Frequency of the AC voltage (50 or 60 Hz) f m = Revolutions per second p = Number of poles (2,4,6...) n = Revolutions per minute (rpm) 6000 = p n n= 7800 = p n n= p 2 4 10 20 26 6000 p 7800 p An example for the number of poles: n (f = 50 Hz) 3000 1500 600 300 230.8

8 The Magnetic Field in the SM No load condition δ = 0 A phase angle α between the rotor and stator current (stator field) This angle is also called δ

9 The Magnetic Field in the SM (2)

Reactive Power from a 10 Synchronous Machine Assume the machine is connected to an infinite bus with constant voltage V. φ I δ V E jxi Locus for vector I with constant real power and variable exitation Locus for vector E with constant real power and variable exitation and reactive power The length of this line is proportional to E cosδ V and hence the reactive power generation and exitation

Phasor diagram with Power a Engineering constant - Egill Benedikt Hreinsson 11 magnetization E = V + jx I I f t s a E V E V f t f t a = = + j jx s jx s jx s X s V jx t s = j V X t s δ 1 E jx f 2 f 2 s = j E jx E X s f 1 f 1 s = j E X s E f 2 δ 2 E f 1 The locus for a vector of the constant excitation voltage δ 1 ji X δ 2 a1 s A locus for the vector of armature current in the case of constant excitation voltage φ 1 I a1 φ 2 I a2 V t ji a2 X s

12 Salient pole rotor q-axis q-axis d - and q - axis are different d-ás V d I d I q φ I d-axis δ V V q E q jx I d d jx I q q q-ás d-axis d - axis is directged along the pole direction. q axis is perpendicular to the pole directions in electrical degrees Geometry Flux Inductance Currents and voltages E = V + jx I + jx I q d d q q

13 P and Q for salient pole rotor P + jq = V I = ( V + jv ) ( I + ji ) * * e e d q d q P + jq = ( V + jv ) ( I ji ) e e d q d q Pe = VdId + VqIq V = Vsinδ V = V cosδ d q V d I d d-axis I q φ I δ V Vq E q jx I d d q-axis jx I q q P = I Vsinδ + I V e d q We substitute: I d = E q V X d q I q cosδ = V X d q Eq Vq Vd Pe = Vsinδ + V X X d cosδ Eq V cosδ V sinδ Pe = Vsinδ + V X X d q q cosδ

14 P and Q for salient pole rotor P e 2 2 EV q V V = sinδ sinδ cosδ + sinδ cosδ X X X d d q Power P e 2 EV q V 1 1 Pe = sinδ + sin 2δ = Pfield + P Xd 2 Xq X d Q e We use: sin 2δ sinδ cosδ = 2 2 2 q 2 = cos + reluctance EV sin δ cos δ δ V X d Xq X d Note when: δ P field P reluctance X d = X q

15 The swing equation P e is the power delivered from one or more machines into the power system J is the moment of inertia (one or more machines) P m is the shaft mechanical power from the turbine p is the number of poles dw m = P P m e The energy balance in rotation, or the swing dt equation is as follows: 2 2 1 2 ω m f e Wm = Jωm = W0 = W0 Kinetic energy in rotation 2 ωm0 f e0 as a function of frequency: The relation between rotation angle and the electrical angle of the stator current: ω m = 2 ωe p ω ω e m = 2π f e ω = 2π f e0 e0 = 2 π f ω = m m0 2 π f m0 W m is the kinetic rotation energy of one or more machines w e, f e is the electrical angle and frequency for the electric oscillation w m, f m is rotation angle and frequency of the rotor mechanical rotation. (The index 0, means that the quantity is a constant at the nominal frequency, 50 or 60 Hz)

16 The swing equation (2) We differentiate this equation... 1 ω 2 2 ω f 2 m e Wm = J m = W0 = W0 2 ωm0 f e0 dw dω 2W ω dω = ω J = dt dt dt...and then we get: 0 m m m m m 2 ωm0 We substitute into the swing equation: dw m = P P m e dt 2W0 dωm Pm Pe = 2 m0 dt m m ω ω ω 2W0 dωm 2 m0 dt ω = T T m e

17 The inertia constant, H H = We define the following quantity: The kinetic energy of the rotating mass Rated power for the generators in this mass 1 J 2 W ωm m0 H 2 S S = = rating rating The unit for H is: Ws/VA = s We examine now the former version of the swing equation... 2W0ωm dωm 2 ωm0 dt and make the m m0 m m = = 1 2 following + approximation where the deviation form the nominal frequency, Δω is small relative to ω = P P ω 1 ω +Δω 1 Δω 1 ω ω ω ω ω ω m0 m0 m0 m0 m0 m0 m e

18 The swing equation (3) We then get the following equation: 2W0 dωm ω m0 dt = P m P e we divide by the rating S rating and get: ω 2W0 dωm Pm Pe = S dt S S m0 rating rating rating By defining the power from the turbine (or system) as a fraction of the rated power, we get: H ω 2 m m0 dω dt = P P mn ( ) en ( )

19 Two equilibrium points Synchronizing torque from δ deviation P e P m dp e /dδ > 0 for δ < 90 - stable equilibrium dp e /dδ < 0 for δ > 90 - unstable equilibrium δ

H on different MVA bases 20 Machine base Steam turbines 4-9 s Gas turbines 3-4 s Hydro turbines 2-4 s Synchronous compensator 1-1.5 s Common base H ~generator size Infinite bus has infinite H Narrow range!

21 Hydroeelectric rotor The multiple poles are shown clearly on the rotor

22 Inside the Búrfell power house

23 Rotor in a hydro station

A rotor from Laxá hydro station, 24 North Iceland

A stator from Laxá hydro station, 25 North Iceland

A stator from Laxá hydro station, 26 North Iceland

27 The stator in a hydroelectric generator

28 267 MVA, 83.3 rpm stator

References 29 P.C. Sen: "Principles of Electric Machines and Power Electronics"; 2. edition: John Wiley & Sons, 1997 O.I. Elgerd: Electric Energy Systems Theory, McGraw-Hill, 1983 A.E. Fitzgerald, C. Kingsley Jr., S.D. Umans: Electric Machinery, McGraw-Hill 2003 P. Kundur: Power System Stability and Control, McGraw-Hill 1994 D.P.Kothari, I.J. Nagrath: Modern Power System Analysis, McGraw-Hill 2003

30 Example 7

31 Example 8

32 Example 9

33 Example 7 - solution

34 Example 8 - solution

35 Example 9 solution