ULTRA OVAL Meter Sizes:9, 4, 45, 50, 5, 5 w/unfactored Pulse Generator (NPG60A) GENERAL SPECIFICATION GS.No.GBU0--E GENERAL ULTRA OVAL MODEL 9, 4, and45 provides extensive capability as a highly dependable OVAL flowmeter to be used for various application in process where accurate flow measurement of low flow rate is required. FEATURES. Accurate (Linearity) to ±0.5% or better. Well suited for small flow measurements.. Pocketless design of measuring chamber construction makes the flowmeter ideal for fine chemicals, foods, pharmaceuticals, cosmetics and etc., furthermore, simplifies maintenance and inspection work.. Flowrate information is transmitted by the pulse generator in the form of a noncontact pulse signal compatible with highly sensitive and reliable remote instrumentation. 4. Absence of any mechanical transmission requires no loss in torque and ensures long service life. 5. Flow totalizing and instantaneous flowrate indication are monitored in a LCD counter independently mounted. Meter : 9, 4, 45, 50 Meter : 5, 5 GENERAL SPECIFICATIONS Basic Meter Item Meter Size Nominal Size Flange Rating Group Group Flow range Operating Temp. Range Linearity Repeatability Meter Body Rear Lid Material Rotor Bearings Shaft Flow direction Finish Description 9 4 45 50 5 5 0mm 0mm 5mm JIS 0K RF, ANSI 50 RF, JPI 50RF JIS6, 0, 0K RF, ANSI 00 RF, JPI 00 RF, DIN0, 6, 0, 5 See flow rang table (P) 0 ~ +0 C ±0.5% ±0.5% or ±0.5% ±0.5% ±0.05% or ±0.0% SCS4 or SCS6 SUS6 or SUS6L Special Carbon SUS6 or SUS6L Special Carbon Special Carbon or Ceramics SUS6 or SUS6L Right Left (St d) Left Right Top Bottom Bottom To Not painted : Special Flange Ratings and Max. Operating pressure : MPa Flange Code JIS 0K RF ANSI 50 RF JIS 0 K RF JIS 0K RF ANSI 00 RF.8 () at 0 C.50 (5.) at 0 C................96 (0) at 0 C.94 (0) at 0 C.94 (0) at 0 C OVAL Corporation Head Office: Tokyo; Tel. 8--60-5. Fax 8--65-8605 Beijing Office: Tel., Fax. 86-0-655-60. Tel. 86-0-65-56 Overseas Branch Offices: Seoul. Singapore. Taipei http://www.oval.co.jp
Pulse Generator Item Meter Size 9, 4, 45, 50, 5, 5 Generator NPG60A Output signal Pulse Pulse Pulse Power supply Cable Transmission longth Wiring mode Ambient temperature Ambient humidity Construction Current Type Pulse with Description Unscaled : 0/=4/0mADC, See range opload resistance (P) ms (Fixed) Open Type Unscaled : Max. 0VDC, allowable current : 50mADC collector Pulse with ms (Fixed) Voltage Material for the housing Coting color Type Pulse width Unscaled : 0/=Max.VDC/Power voltage Min.VDC ms (Fixed) ~4VDC Current consumption Max.0mADC See range opload resistance (P) Cable w/outernal shield (CVVS.5mm ) finished O.D. 8.5~mm km wires system Currene pulse wires system Open collector or voltage pulse 0~+70 C (explesion-proof : 0~+55 C) 5~00%RH, Condensation not allowedπ Explosion-proof construction : ExdIIBT4X Water-proof construction : JIS C090 Splash proof type (IP65equivalend) Non-explosion-proof construction Alminum Alloy Baked Painting, Color : Muncell.5BG5/6 (Cover) Muncell.5G8/ (Body) : For wiring of explosion-proof model, ensure tp use the heat-resisting cable(more than 70 C)and pressure tight packing attached. NOMINZAL METER FACTOR Meter P/r Nominal Meter Factor 9 0.0988 ml/p 4 0.4896 ml/p 45 4.9 ml/p 50 4 4.968 ml/p 5 4 9.664 ml/p 5 4 7.5 ml/p METER ERROR and PRESSURE LOSS Meter Error (%) Meter Error (%) Meter : 9, 4, 45 +0.5 +0. 0 0. 0.5 +0.5 0 0.5 Lub. Oil (0mPa. s) Kerosene (.mpa. s) Gasoline (0.4mPa. s) Lub. Oil Kerosene Gasoline 0% 5% 50% 75% 00% Flow rate (m /h) Meter : 50, 5, 5 Fuel Oil (mpa. s) Kerosene (0.mPa. s) Water (mpa. s) Gasoline (0.4mPa. s) Fuel Oil Water Gasoline 9 4 45 0% 5% 50% 75% 00% Flow rate(m /h) 00% Flow rate indicates the Max. Flowrate for each viscosity. 40 0 0 0 0 Pressure Loss (KPa) 0 7.5 0 5 0.5 Pressure Loss (KPa) FLOW RANGE Flow rate for water shall be selected from the following specification for temperature and viscosity. Temperature range Nax. 0 C 0 ~ 80 C 80 ~ 0 C Linearity : ±0.5%, Operating Temp. Range: 0 ~ +0 C Meter Meter Linearity : ±0.5% (Option) Operating Temp. Range: 0 ~ +0 C Meter Meter Viscosity range 0.8 ~.0mPa. s 0. ~ 0.8mPa. s Less than 0.mPa. s Note : () Only Model 45 is available up to 000mPa. s. Note : () Consult Fectory for High viscosity liquid more than 000mPa. s. Unit in L/h Viscosity less than 0. ~ 0.8 ~ ~ 5 ~ Range 0.mPa.s 0.8mPa.s mpa.s 5mPa.s 00mPa.s 9.4 0.7 0.5 0. 4 8 60 60 4 60.5 60 60 45 5040 5 40 5 40 0 40 5 40 Unit in m /h Viscosity less than 0. ~ 0.8 ~ ~ 5 ~ Range 0.mPa.s 0.8mPa.s mpa.s 5mPa.s 000mPa.s Unit in L/h Viscosity less than 0. ~ 0.8 ~ ~ 5 ~ Range 0.mPa.s 0.8mPa.s mpa.s 5mPa.s 00mPa.s Unit in m /h Viscosity less than 0. ~ 0.8 ~ ~ 5 ~ Range 0.mPa.s 0.8mPa.s mpa.s 5mPa.s 000mPa.s
SYSTEM OF RECEIVING INSTRUMENTS Totalizer (EL0) Analog Signal 40mADC 5VDC (Option) Open Collector 40mADC 5VDC F/I Converter (SU, SU5) 00mVDC 000ADC ULTRAOVAL Meter 50 w/npg60a Unfactored Pulse Analog Signal Pulse Signal (Contact/Voltage) 40mADC 050mADC 5VDC Scaled Pulse Converter/Compensator or Pulse Output EL084 Unscaled Pulse The diagram shows an example to be applied. According to user s request, any other instrumentation can be arranged. With regard to the detailed information for each instrument, consult the factory. Pulse Signal Scaled Pulse (St d) Open Collector or Unscaled Pulse CONNECTING DIAGRAM [] Current Pulse SUP. COM. 4 A 00 R + + (~4VDC 0%) ms RX0mA 750 Load Registance ( ) Zone of Load Registance Action Zone RX4mA 0 0.8 6.4 Power Voltage (VDC) [] Open Collector Pulse E ( 0VDC) R (Allowable current : Max.50mA) 4 SUP. SIG. COM. Max.50mA + + (~4VDC 0%) ms Lo Level (<VDC) Hi Level (Supply Voltage) [] Voltage Pulse 4 SUP. SIG. COM. Power Voltage + (~4VDC 0%) + ms Max.VDC More than (Power Voltage VDC)
OUT DIMENSIONS (Unit in mm) Meter : 9, 4, 45, 50 L B 0 C D 6 60 88 Conduit Connection G/ E Meter Flange Rating L(Face to Face) B(Full Length) C D E Approx.Mass. JIS 0K RF 9 ANSI/JPI 50 RF 4 JIS 0K RF 50 0.8 6.5 9..5 6.5kg 45 JIS 0K RF ANSI/JPI 00 RF JIS 0K RF 00 ANSI/JPI 50 RF 98 8kg 50 JIS 0K RF 04 8 65 4 4 JIS 0K RF 08 kg ANSI/JPI 00 RF 04 Meter : 5, 5 L 06 B 79 C D 6 60 88 Conduit Connection G/ E Meter Flange Rating L(Face to Face) B(Full Length) C D E Approx.Mass. JIS 0K RF ANSI/JPI 50 RF 00 9kg 5 JIS 0K RF 04 09.8 88 4.8 6 JIS 0K RF kg ANSI/JPI 00 RF 07 JIS 0K RF ANSI/JPI 50 RF 00 0kg 5 JIS 0K RF 04.5 99 55.5 7 JIS 0K RF kg ANSI/JPI 00 RF 07 4
PRODUCT CODE EXPLANATION Item Code No. Type L U S 9 4 Meter 4 5 5 0 5 5 C Materials E Z Fange rating Bearing type 5 7 8 Generator Construction generator 7 0 Type of output signal 0 5 0 7 Description ULTRA OVAL ( 0~+0 C) Nominal Size : 0mm Nominal Size : 0mm Nominal Size : 0mm Nominal Size : 0mm Nominal Size : 5mm Nominal Size : 5mm SUS6 Rotor + SCS4 Body (Meter l 9 is used only special carbon.) SUS6L Rotor + SCS6 Body [Special] Other than above JIS 0K RF, ANSI / JPI 50 RF JIS 6~0K RF, ANSI / JPI 00 RF, DIN 0~5 Carbon Bearing (OB44) Ceramic Bearing (OB96) Nonpolymeric Ceramics (OB96) Nonpolymeric Carbon (OB44) NPG60A Non-explosionproof (NPG60A) Flameproof (NPG60AEP) TIIS Flameproof (NPG60AEP) NEPSI Unscaled Pulse (4/0mA Current Pulse), Wire system Unscaled Pulse (Open collector), Wire system Unscaled Pulse (Voltage Pulse), Wire system Notes:. Flange face provides RF only, FF is not supplied.. Meter s 4 and 45 use the same body material SUS6 or 6L for rotors. Meter 9 uses special carbon rotors only. 5
STRAINER It is necessary to install a strainer directly before the flow meter or as close as possible on the flow input side, so that solid particles mixed in the fluid do not enter the flow meter and causes problems. Model number SR0 C 0 JIS 0K RF 80 SR0 C 0 SR0 C 0 Nominal Flange rating L (mm) H (mm) Body material Net material Net mesh Applicable meter model JIS 0K RF 84 00 9 0mm ANS/JPI 50 RF 78 SCS4A SUS6 00 4 JIS 0K RF 89 45 6 ANS/JPI 00 RF 87 SR0 C (E) 0 JIS 0K RF 80 SR0 C SCS4A SUS6 (E) 0 0mm ANS/JPI 50 RF 77 00 00 50 SR0 C (SCS6A) (SUS6L) (E) 0 JIS 0K RF 84 SR0 C (E) 0 JIS 0K RF 0 65 SR08 C SCS4A SUS6 5 (E) 0 5mm ANS/JPI 50 RF 60 SR08 C 09 (SCS6A) (SUS6L) 5 (E) 0 JIS 0K RF 4 6
POINTS OF CAUTION These flowmeters used to measure minute flow rate are precisely adjusted in the factory, so it is necessary to take special care when unpacking, installing in the piping and testing. Never let foreign materials enter into the measuring chamber. Flush the piping well enough before installation. It is essential that you always avoid violently spinning the rotor by flushing air or an excessive flow rate in a short period of time. Only use Oval's strainer dedicatedly designed for these flowmeters. PLEASE SUPPLY THE FOLLOWING INFORMATION WHEN YOU INQUIRE.. Model L. Fluid to be measured Name Viscosity mpa s Specific gravity. Flow rate (L/h) Maximum Normal Minimum 4. Fluid temperature ( C) Maximum Normal Minimum 5. Ambient temperature ( C) Maximum Normal Minimum 6. Pressure (MPa) Maximum Normal Minimum 7. Flow direction Right Left, Bottom Top 8. Flange connection Nominal diameter mm, Flange rating 9. Required accuracy (Linearity) ± % 0. Explosion-proof construction Required class Not required. Accessories Strainer, Air eliminator, Companion flange. Quantity Including accessories. Receiving device Type, manufacturer, model, specifications (input, output, power supply, etc.) 4. Distance between the flow meter and the receiving device m 7
The specification as of May, 006 is stated in this GS Sheet. Specifications and design are subject to change without notice. Sales Representative: