Fluid: Air and water are fluids that exert forces on the human body.

Similar documents
Linear Transport Relations (LTR)

Chapter 14. Lecture 1 Fluid Mechanics. Dr. Armen Kocharian

Recap: Static Fluids

Chapter 14. Fluid Mechanics

MULTIPLE-CHOICE PROBLEMS:(Two marks per answer) (Circle the Letter Beside the Most Correct Answer in the Questions Below.)

Physics 207 Lecture 18

MULTIPLE-CHOICE PROBLEMS :(Two marks per answer) (Circle the Letter Beside the Most Correct Answer in the Questions Below.)

11.1 Mass Density. Fluids are materials that can flow, and they include both gases and liquids. The mass density of a liquid or gas is an

ME 262 BASIC FLUID MECHANICS Assistant Professor Neslihan Semerci Lecture 4. (Buoyancy and Viscosity of water)

Applied Fluid Mechanics

s and FE X. A. Flow measurement B. properties C. statics D. impulse, and momentum equations E. Pipe and other internal flow 7% of FE Morning Session I

Chapter 10. Solids and Fluids

UNIT 4 FORCES ON IMMERSED BODIES. Lecture-01

External Flow and Boundary Layer Concepts

Fluid Mechanics. Chapter 12. PowerPoint Lectures for University Physics, Thirteenth Edition Hugh D. Young and Roger A. Freedman

Principles of Convection

Chapter 9: Solids and Fluids

hapter 13 Archimedes Up-thrust

Chapter 9. Solids and Fluids. States of Matter. Solid. Liquid. Gas

UNIT II CONVECTION HEAT TRANSFER

There are three phases of matter: Solid, liquid and gas

Chapter 9. Solids and Fluids

Convection. forced convection when the flow is caused by external means, such as by a fan, a pump, or atmospheric winds.

Steven Burian Civil & Environmental Engineering September 25, 2013

Chapter 9 Solids and Fluids. Elasticity Archimedes Principle Bernoulli s Equation

CHAPTER 4 - STATES OF MATTER. Mr. Polard Physical Science Ingomar Middle School

Chapter 9. Solids and Fluids. 1. Introduction. 2. Fluids at Rest. 3. Fluid Motion

States of Matter. Chapter 9 Solids and Fluids. Solids: Stress and Strain. Solids: Stress and Strain. Stress = Force Area. Strain =!L L. Example 9.

Nicholas J. Giordano. Chapter 10 Fluids

States of Matter. Chapter 9 Solids and Fluids. Solids: Stress and Strain. Solids: Stress and Strain. Stress = Force Area. Strain =!

AP Physics Laboratory #6.1: Analyzing Terminal Velocity Using an Interesting Version of Atwood s Machine

TOPICS. Density. Pressure. Variation of Pressure with Depth. Pressure Measurements. Buoyant Forces-Archimedes Principle

Tutorial 10. Boundary layer theory

Day 24: Flow around objects

Fluid Mechanics. Chapter 9 Surface Resistance. Dr. Amer Khalil Ababneh

Visualization of flow pattern over or around immersed objects in open channel flow.

Physics 207 Lecture 20. Chapter 15, Fluids

Phy 212: General Physics II. Daniel Bernoulli ( )

Chapter 12: Gravity, Friction, & Pressure Physical Science, McDougal-Littell, 2008

Fluid Mechanics-61341

An-Najah National University Civil Engineering Department. Fluid Mechanics. Chapter 1. General Introduction

Chapter 10. Solids & Liquids

Figure 3: Problem 7. (a) 0.9 m (b) 1.8 m (c) 2.7 m (d) 3.6 m

Section 1 Matter and Energy

Chapter 15: Fluids. Mass Density = Volume. note : Fluids: substances which flow

Fluids. Fluids in Motion or Fluid Dynamics

CHAPTER 6 Fluids Engineering. SKMM1922 Introduction of Mechanical Engineering

CHAPTER 10- GRAVITATION

FE Fluids Review March 23, 2012 Steve Burian (Civil & Environmental Engineering)

MECHANICAL PROPERTIES OF FLUIDS

Reminder: HW #10 due Thursday, Dec 2, 11:59 p.m. (last HW that contributes to the final grade)

Fluid Mechanics Prof. T.I. Eldho Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 17 Laminar and Turbulent flows

S.E. (Mech.) (First Sem.) EXAMINATION, (Common to Mech/Sandwich) FLUID MECHANICS (2008 PATTERN) Time : Three Hours Maximum Marks : 100

Fluid Mechanics. The atmosphere is a fluid!

Chapter 9 NATURAL CONVECTION

150A Review Session 2/13/2014 Fluid Statics. Pressure acts in all directions, normal to the surrounding surfaces

storage tank, or the hull of a ship at rest, is subjected to fluid pressure distributed over its surface.

Chapter 1 INTRODUCTION

Fluid Mechanics. If deformation is small, the stress in a body is proportional to the corresponding

Chapter 9. Solids and Fluids

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS

CPO Science Foundations of Physics. Unit 8, Chapter 27

SY 2018/ st Final Term Revision. Student s Name: Grade: 10A/B. Subject: Physics. Teachers Signature

TALLINN UNIVERSITY OF TECHNOLOGY, DIVISION OF PHYSICS 13. STOKES METHOD

Physics 201 Chapter 13 Lecture 1

Prof. Scalo Prof. Vlachos Prof. Ardekani Prof. Dabiri 08:30 09:20 A.M 10:30 11:20 A.M. 1:30 2:20 P.M. 3:30 4:20 P.M.

Chapter 12. Fluid Mechanics. A. The density ρ of a substance of uniform composition is defined as its mass M divided by its volume V.

Fluid Mechanics. du dy

Lecture 8 Equilibrium and Elasticity

of Friction in Fluids Dept. of Earth & Clim. Sci., SFSU

DAY 19: Boundary Layer

Momentum Circular Motion and Gravitation Rotational Motion Fluid Mechanics

PART 1B EXPERIMENTAL ENGINEERING. SUBJECT: FLUID MECHANICS & HEAT TRANSFER LOCATION: HYDRAULICS LAB (Gnd Floor Inglis Bldg) BOUNDARY LAYERS AND DRAG

States of Matter Unit

Outlines. simple relations of fluid dynamics Boundary layer analysis. Important for basic understanding of convection heat transfer

6. Basic basic equations I ( )

Key Ideas for These Lectures

4. Find the average velocities and average accelerations of a particle moving in 1-D given its position at various times.

Chapter 2. States of Matter

Kinetic Theory. States of Matter. Thermal Energy. Four States of Matter. Kinetic Energy. Solid. Liquid. Definition: How particles in matter behave

Fluid Mechanics. Chapter 14. Modified by P. Lam 6_7_2012

Given the water behaves as shown above, which direction will the cylinder rotate?

Chapter 1: Basic Concepts

PROPERTIES OF BULK MATTER

UNIT II. Buoyancy and Kinematics of Fluid Motion

m V DEFINITION OF MASS DENSITY The mass density of a substance is the mass of a substance divided by its volume: SI Unit of Mass Density: kg/m 3

What s important: viscosity Poiseuille's law Stokes' law Demo: dissipation in flow through a tube

Physics 220: Classical Mechanics

Fluid Mechanics Qualifying Examination Sample Exam 2

(1) (1) (viscous) drag, water resistance, viscous force, V, F, D [upwards] (1)

Physics 107 HOMEWORK ASSIGNMENT #9

Unit 4: The Nature of Matter

PHYSICS HYDROSTATICS FORM 5

Friction Factors and Drag Coefficients

Chapter 11. Fluids. continued

Chapter 9. Solids and Fluids 9.3 DENSITY AND PRESSURE

Today s lecture. WEST VIRGINIA UNIVERSITY Physics

Aerodynamics. Basic Aerodynamics. Continuity equation (mass conserved) Some thermodynamics. Energy equation (energy conserved)

Fluids, Continuity, and Bernouli

If we change the quantity causing the deformation from force to force per unit area, we get a relation that does not depend on area.

Transcription:

Fluid: Air and water are fluids that exert forces on the human body. term fluid is often used interchangeably with the term liquid, from a mechanical perspective, Fluid: substance that flows when subjected to a shear stress.

Relative velocity: Velocity of a body with respect to a fluid Fluid is a medium capable of flow, the influence of the fluid on a body moving through it depends not only on the body s velocity but also on the velocity of the fluid. Relative velocity: When a body moves through a fluid, the relative velocity of the body with respect to the fluid influences the magnitude of the acting forces.

If the relative velocity of the object with respect to the water is low, there is little apparent disturbance of the immediately surrounding water e.g. human hand moves through the water If the relative velocity of motion through the water is sufficiently high, waves and eddies appear Types of flow:when an object moves with sufficiently low velocity relative to a fluid medium, the flow of the adjacent fluid is termed laminar flow. Laminar flow: flow characterized by smooth, parallel layers of fluid Turbulent flow: flow characterized by mixing of adjacent fluid layers

Laminar flow: Low velocity relative to fluid medium Turbulent flow: High velocity relative to fluid medium

fluid s density, specific weight, and viscosity. The denser and heavier the fluid medium surrounding a body, the greater the magnitude of the forces the fluid exerts on the body. The property of fluid viscosity means the internal resistance to a fluid to flow, Increased fluid viscosity results in increased forces exerted on bodies exposed to the fluid.

Density = mass / volume Specific weight ( ) = ratio of weight to volume Viscosity = internal resistance to flow Atmospheric pressure and temperature influence a fluid s density, specific weight, and viscosity

Buoyancy is a fluid force that always acts vertically upward. Archimedes principle: Weight of the fluid is calculated by multiplying the specific weight of the fluid by the volume of the portion of the body that is surrounded by the fluid. Buoyancy (F b ) is calculated as the product of the displaced volume (V d ) and the fluid s specific weight ( ). The more dense fluid, the greater the magnitude of the buoyant force. Center of volume/center of bouncy: point around which a body s volume is equally distributed and at which the buoyant force acts.

Some individuals cannot float in a motionless position, and other float with little effort. Floatability is a function of body density For flotation, 1:buoyant force must be greater than or equal to body weight 2:Orientation of the human body 3:Torque on the floating human body

Depends on body s buoyancy and body weight Weight = <buoyant; body floats in a motionless state Weight > buoyant; body sinks, moving downward in the direction of the net force Most object float statically in a partially submerged position

15-3

Drag: is a force caused by the dynamic action of a fluid that acts in the direction of the free stream fluid flow Drag. The cumulative effects of turbulence and fluid viscosity acting on an object in motion A resistance force: a force that slows the motion of a body moving through a fluid. Drag following formula: In this formula, F D is drag force, C D is coefficient of drag, fluid density, A p is the projected area of the body and v is the relative velocity of the body with respect to the fluid.

F D = ½C D A p v 2 Coefficient of drag: Depends on shape & orientation of a body Components of total drag force: Skin friction Form drag Wave drag

Coefficient of drag: unitless number that is a body s ability to generate fluid resistance Depends on the shape and orientation of a body relative to the fluid flow, with long, streamlined bodies generally having lower coefficients of drag than blunt or irregularly shaped objects.

Skin friction, surface drag, or viscous drag: Resistance derived from friction between adjacent layers of fluid near a body moving through the fluid Boundary layer: layer of fluid immediately adjacent to the body Factors that affect skin friction drag Velocity of fluid flow surface area viscosity

Wave drag: Resistance created by the generation of waves at the interface between two different fluids, such as air and water Major effect on human swimmers Factors that affect wave drag Greater up-and-down motion Increased swimming speed Skilled swimmer produce smaller waves than less-skilled swimmers, presumably due to better technique (less up-anddown motion)

Form drag or profile drag or pressure drag: Resistance created by a Pressure differential between the lead and rear sides of a body moving through a fluid Factors that affect form drag: Relative velocity, pressure gradient, and surface area Streamlining helps to minimize form drag

Pressure in a fluid varies inversely with the velocity

The End