w LED light engines Module SLE G7 ADV Modules SLE ADVANCED Product description For spotlights and downlights For operating with SELV Driver Luminous flux up to 6,18 lm at tp = 65 C High efficacy up to 184 lm/w for the LED module at tp = 25 C High system efficacy up to 157 lm/w at tp = 65 C High colour consistency (MacAdam 3) Excellent thermal management by COB technology Uniform radiation with Dam&Fill technology Integrated LED module Cooling required Flexible operating modes 5-year guarantee LES9 LES13 È Standards, page 6 Colour temperatures and tolerances, page 12 LES15 www.tridonic.com 1
Module SLE G7 ADV Modules SLE ADVANCED Technical data Beam characteristic 115 Ambient temperature range -3... +8 C tp rated 65 C tc 1 15 C Irated for LES9 Irated for LES13 Irated for LES15 Imax for LES9 1 Imax for LES13 1 Imax for LES15 1 Max. permissible LF current ripple for LES9 Max. permissible LF current ripple for LES13 Max. permissible LF current ripple for LES15 Max. permissible peak current for LES9 Max. permissible peak current for LES13 Max. permissible peak current for LES15 Max. working voltage for insulation SELV 2 Electrical strength CTI of the printed circuit board 35 ma 5 ma 9 ma 55 ma 99 ma 1,32 ma 72 ma 1,44 ma 1,92 ma 1,8 ma / max. 8 ms 1,8 ma / max. 8 ms 2,16 ma / max. 8 ms 6 V.5 kv 6 V ESD classification Severity level 4 Risk group (EN 62471:28) for LES9 (at Imax) Risk group (EN 62471:28) for LES9 (at I 5 ma) Risk group (EN 62471:28) for LES13 (at Imax) Risk group (EN 62471:28) for LES13 (at I 9 ma) Risk group (EN 62471:28) for LES15 (at Imax) Risk group (EN 62471:28) for LES15 (at I 12 ma) Type of protection RG2 (Ethr = 1635 lx, RG1 at d 897 mm) RG1 RG2 (Ethr = 1635 lx, RG1 at d 1,22 mm) RG1 RG2 (Ethr = 1635 lx, RG1 at d 1,41 mm) RG1 IP,9±,1 LES9 ø11 13,5 ø9* ±,2 max. 1,6 ø3,9 (2x),85 13,9 3,75 tc/tp Dimensions in mm, *optical LES,9±,1 LES13 ø15 19 ø13* ±,2 25 max. 1,6 tc/tp 1,5 ø5,2 (2x),9±,1 5,4 tc/tp M3 (2x) LES15 ø16,5 19 ø15* ±,2 25 max. 1,6,925 M3 (2x) ø5,2 (2x) www.tridonic.com 2
Module SLE G7 ADV Modules SLE ADVANCED Ordering data Type Article number Colour temperature Colour rendering Housing Connection cable Packaging Weight per pc. index CRI SLE G7 9mm 12lm 83 R ADV 28251 3, K > 8 no no 2 pc(s)..2 kg SLE G7 9mm 12lm 84 R ADV 282511 4, K > 8 no no 2 pc(s)..2 kg SLE G7 9mm 12lm 927 R ADV 282512 2,7 K > 9 no no 2 pc(s)..2 kg SLE G7 9mm 12lm 93 R ADV 282513 3, K > 9 no no 2 pc(s)..2 kg SLE G7 9mm 12lm 94 R ADV 282514 4, K > 9 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 827 R ADV 282515 2,7 K > 8 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 83 R ADV 282516 3, K > 8 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 835 R ADV 282517 3,5 K > 8 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 84 R ADV 282518 4, K > 8 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 927 R ADV 282519 2,7 K > 9 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 93 R ADV 28252 3, K > 9 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 935 R ADV 282521 3,5 K > 9 no no 2 pc(s)..2 kg SLE G7 13mm 3lm 94 R ADV 282522 4, K > 9 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 827 R ADV 282523 2,7 K > 8 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 83 R ADV 282524 3, K > 8 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 835 R ADV 282525 3,5 K > 8 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 84 R ADV 282526 4, K > 8 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 927 R ADV 282527 2,7 K > 9 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 93 R ADV 282528 3, K > 9 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 935 R ADV 282529 3,5 K > 9 no no 2 pc(s)..2 kg SLE G7 15mm 4lm 94 R ADV 28253 4, K > 9 no no 2 pc(s)..2 kg SLE G7 9mm 12lm 83 C ADV 282551 3, K > 8 no yes 2 pc(s)..3 kg SLE G7 9mm 12lm 84 C ADV 282552 4, K > 8 no yes 2 pc(s)..3 kg SLE G7 9mm 12lm 93 C ADV 282553 3, K > 9 no yes 2 pc(s)..3 kg SLE G7 9mm 12lm 94 C ADV 282554 4, K > 9 no yes 2 pc(s)..3 kg SLE G7 13mm 3lm 83 C ADV 282555 3, K > 8 no yes 2 pc(s)..3 kg SLE G7 13mm 3lm 84 C ADV 282556 4, K > 8 no yes 2 pc(s)..3 kg SLE G7 13mm 3lm 93 C ADV 282557 3, K > 9 no yes 2 pc(s)..3 kg SLE G7 13mm 3lm 94 C ADV 282558 4, K > 9 no yes 2 pc(s)..3 kg SLE G7 15mm 4lm 83 C ADV 282563 3, K > 8 no yes 2 pc(s)..3 kg SLE G7 15mm 4lm 84 C ADV 282564 4, K > 8 no yes 2 pc(s)..3 kg SLE G7 15mm 4lm 93 C ADV 282565 3, K > 9 no yes 2 pc(s)..3 kg SLE G7 15mm 4lm 94 C ADV 282566 4, K > 9 no yes 2 pc(s)..3 kg www.tridonic.com 3
Specific technical data Type 7 Photometric code Forward current SLE 9mm 12lm Operating mode HE at 25 ma Luminous flux Luminous flux Power at tp = 25 C 3 at tp = 65 C 3 consumption 35 Min. forward voltage at tp = 65 C Max. forward voltage at tp = 25 C Luminous efficacy module at tp = 25 C Luminous efficacy module at tp = 65 C Luminous efficacy system at tp = 65 C 4 SLE G7 9mm 12lm 83 ADV 83/359 25 ma 1,45 lm 1,35 lm 8.6 W 31.5 V 37.5 V 168 lm/w 158 lm/w 142 lm/w > 8 SLE G7 9mm 12lm 84 ADV 84/359 25 ma 1,54 lm 1,43 lm 8.6 W 31.5 V 37.5 V 177 lm/w 167 lm/w 15 lm/w > 8 SLE G7 9mm 12lm 927 ADV 927/359 25 ma 1,17 lm 1,9 lm 8.6 W 31.5 V 37.5 V 135 lm/w 128 lm/w 115 lm/w > 9 SLE G7 9mm 12lm 93 ADV 93/359 25 ma 1,2 lm 1,12 lm 8.6 W 31.5 V 37.5 V 138 lm/w 131 lm/w 118 lm/w > 9 SLE G7 9mm 12lm 94 ADV 94/359 25 ma 1,29 lm 1,2 lm 8.6 W 31.5 V 37.5 V 148 lm/w 14 lm/w 126 lm/w > 9 SLE 9mm 12lm Operating mode NM at 35 ma SLE G7 9mm 12lm 83 ADV 83/359 35 ma 1,97 lm 1,82 lm 12.3 W 32.4 V 38.6 V 158 lm/w 148 lm/w 133 lm/w > 8 SLE G7 9mm 12lm 84 ADV 84/359 35 ma 2,8 lm 1,93 lm 12.3 W 32.4 V 38.6 V 167 lm/w 156 lm/w 14 lm/w > 8 SLE G7 9mm 12lm 927 ADV 927/359 35 ma 1,57 lm 1,46 lm 12.3 W 32.4 V 38.6 V 126 lm/w 118 lm/w 16 lm/w > 9 SLE G7 9mm 12lm 93 ADV 93/359 35 ma 1,63 lm 1,51 lm 12.3 W 32.4 V 38.6 V 13 lm/w 122 lm/w 11 lm/w > 9 SLE G7 9mm 12lm 94 ADV 94/359 35 ma 1,74 lm 1,61 lm 12.3 W 32.4 V 38.6 V 139 lm/w 131 lm/w 118 lm/w > 9 SLE 9mm 12lm Operating mode HO at 5 ma SLE G7 9mm 12lm 83 ADV 83/359 5 ma 2,7 lm 2,48 lm 17.8 W 32.8 V 39. V 15 lm/w 139 lm/w 125 lm/w > 8 SLE G7 9mm 12lm 84 ADV 84/359 5 ma 2,85 lm 2,62 lm 17.8 W 32.8 V 39. V 158 lm/w 147 lm/w 132 lm/w > 8 SLE G7 9mm 12lm 927 ADV 927/359 5 ma 2,15 lm 1,98 lm 17.8 W 32.8 V 39. V 119 lm/w 111 lm/w 1 lm/w > 9 SLE G7 9mm 12lm 93 ADV 93/359 5 ma 2,23 lm 2,5 lm 17.8 W 32.8 V 39. V 123 lm/w 115 lm/w 14 lm/w > 9 SLE G7 9mm 12lm 94 ADV 94/359 5 ma 2,38 lm 2,19 lm 17.8 W 32.8 V 39. V 132 lm/w 123 lm/w 111 lm/w > 9 SLE 13mm 3lm Operating mode HE at 35 ma SLE G7 13mm 3lm 827 ADV 827/359 35 ma 2,4 lm 1,9 lm 11.8 W 3.9 V 36.8 V 171 lm/w 162 lm/w 146 lm/w > 8 SLE G7 13mm 3lm 83 ADV 83/359 35 ma 2,12 lm 1,98 lm 11.8 W 3.9 V 36.8 V 178 lm/w 168 lm/w 151 lm/w > 8 SLE G7 13mm 3lm 835 ADV 835/359 35 ma 2,15 lm 2,1 lm 11.8 W 3.9 V 36.8 V 18 lm/w 171 lm/w 154 lm/w > 8 SLE G7 13mm 3lm 84 ADV 84/359 35 ma 2,2 lm 2,5 lm 11.8 W 3.9 V 36.8 V 184 lm/w 174 lm/w 157 lm/w > 8 SLE G7 13mm 3lm 927 ADV 927/359 35 ma 1,68 lm 1,56 lm 11.8 W 3.9 V 36.8 V 14 lm/w 133 lm/w 12 lm/w > 9 SLE G7 13mm 3lm 93 ADV 93/359 35 ma 1,75 lm 1,63 lm 11.8 W 3.9 V 36.8 V 146 lm/w 138 lm/w 124 lm/w > 9 SLE G7 13mm 3lm 935 ADV 935/359 35 ma 1,82 lm 1,7 lm 11.8 W 3.9 V 36.8 V 152 lm/w 144 lm/w 13 lm/w > 9 SLE G7 13mm 3lm 94 ADV 94/359 35 ma 1,9 lm 1,77 lm 11.8 W 3.9 V 36.8 V 159 lm/w 151 lm/w 136 lm/w > 9 SLE 13mm 3lm Operating mode NM at 5 ma SLE G7 13mm 3lm 827 ADV 827/359 5 ma 2,84 lm 2,64 lm 17.3 W 31.8 V 37.9 V 162 lm/w 152 lm/w 137 lm/w > 8 SLE G7 13mm 3lm 83 ADV 83/359 5 ma 2,95 lm 2,74 lm 17.3 W 31.8 V 37.9 V 168 lm/w 158 lm/w 142 lm/w > 8 SLE G7 13mm 3lm 835 ADV 835/359 5 ma 2,98 lm 2,77 lm 17.3 W 31.8 V 37.9 V 17 lm/w 16 lm/w 144 lm/w > 8 SLE G7 13mm 3lm 84 ADV 84/359 5 ma 3,5 lm 2,83 lm 17.3 W 31.8 V 37.9 V 174 lm/w 164 lm/w 148 lm/w > 8 SLE G7 13mm 3lm 927 ADV 927/359 5 ma 2,33 lm 2,16 lm 17.3 W 31.8 V 37.9 V 133 lm/w 125 lm/w 113 lm/w > 9 SLE G7 13mm 3lm 93 ADV 93/359 5 ma 2,42 lm 2,25 lm 17.3 W 31.8 V 37.9 V 138 lm/w 13 lm/w 117 lm/w > 9 SLE G7 13mm 3lm 935 ADV 935/359 5 ma 2,53 lm 2,35 lm 17.3 W 31.8 V 37.9 V 144 lm/w 136 lm/w 122 lm/w > 9 SLE G7 13mm 3lm 94 ADV 94/359 5 ma 2,64 lm 2,45 lm 17.3 W 31.8 V 37.9 V 151 lm/w 142 lm/w 128 lm/w > 9 SLE 13mm 3lm Operating mode HO at 9 ma SLE G7 13mm 3lm 827 ADV 827/359 9 ma 4,8 lm 4,4 lm 33.3 W 34. V 4.5 V 142 lm/w 132 lm/w 119 lm/w > 8 SLE G7 13mm 3lm 83 ADV 83/359 9 ma 4,98 lm 4,57 lm 33.3 W 34. V 4.5 V 148 lm/w 137 lm/w 123 lm/w > 8 SLE G7 13mm 3lm 835 ADV 835/359 9 ma 5,1 lm 4,59 lm 33.3 W 34. V 4.5 V 148 lm/w 138 lm/w 124 lm/w > 8 SLE G7 13mm 3lm 84 ADV 84/359 9 ma 5,12 lm 4,69 lm 33.3 W 34. V 4.5 V 152 lm/w 141 lm/w 127 lm/w > 8 SLE G7 13mm 3lm 927 ADV 927/359 9 ma 3,92 lm 3,6 lm 33.3 W 34. V 4.5 V 116 lm/w 18 lm/w 97 lm/w > 9 SLE G7 13mm 3lm 93 ADV 93/359 9 ma 4,9 lm 3,75 lm 33.3 W 34. V 4.5 V 121 lm/w 112 lm/w 11 lm/w > 9 SLE G7 13mm 3lm 935 ADV 935/359 9 ma 4,26 lm 3,91 lm 33.3 W 34. V 4.5 V 126 lm/w 117 lm/w 15 lm/w > 9 SLE G7 13mm 3lm 94 ADV 94/359 9 ma 4,47 lm 4, lm 33.3 W 34. V 4.5 V 132 lm/w 123 lm/w 111 lm/w > 9 1 See derating curves in data sheet section 2.3. 2 The detailed explanation, see data sheet section 3.1. 3 Tolerance range for optical and electrical data: ±1 %. 4 Assumed efficiency for the LED Driver is.9. 5 All values at tp = 65 C. 6 HE... high efficiency, NM... nominal mode, HO... high output. Colour rendering index CRI www.tridonic.com 4
Specific technical data Type 7 Photometric code Forward current SLE 15mm 4lm Operating mode HE at 5 ma Luminous flux Luminous flux Power at tp = 25 C 3 at tp = 65 C 3 consumption 35 Min. forward voltage at tp = 65 C Max. forward voltage at tp = 25 C Luminous efficacy module at tp = 25 C Luminous efficacy module at tp = 65 C Luminous efficacy system at tp = 65 C 4 SLE G7 15mm 4lm 827 ADV 827/359 5 ma 2,84 lm 2,65 lm 16.7 W 3.7 V 36.6 V 168 lm/w 159 lm/w 143 lm/w > 8 SLE G7 15mm 4lm 83 ADV 83/359 5 ma 2,96 lm 2,76 lm 16.7 W 3.7 V 36.6 V 175 lm/w 165 lm/w 149 lm/w > 8 SLE G7 15mm 4lm 835 ADV 835/359 5 ma 3,1 lm 2,8 lm 16.7 W 3.7 V 36.6 V 177 lm/w 168 lm/w 151 lm/w > 8 SLE G7 15mm 4lm 84 ADV 84/359 5 ma 3,6 lm 2,86 lm 16.7 W 3.7 V 36.6 V 181 lm/w 171 lm/w 154 lm/w > 8 SLE G7 15mm 4lm 927 ADV 927/359 5 ma 2,33 lm 2,17 lm 16.7 W 3.7 V 36.6 V 137 lm/w 13 lm/w 117 lm/w > 9 SLE G7 15mm 4lm 93 ADV 93/359 5 ma 2,42 lm 2,25 lm 16.7 W 3.7 V 36.6 V 142 lm/w 135 lm/w 122 lm/w > 9 SLE G7 15mm 4lm 935 ADV 935/359 5 ma 2,52 lm 2,35 lm 16.7 W 3.7 V 36.6 V 149 lm/w 141 lm/w 127 lm/w > 9 SLE G7 15mm 4lm 94 ADV 94/359 5 ma 2,64 lm 2,46 lm 16.7 W 3.7 V 36.6 V 156 lm/w 148 lm/w 133 lm/w > 9 SLE 15mm 4lm Operating mode NM at 9 ma SLE G7 15mm 4lm 827 ADV 827/359 9 ma 4,87 lm 4,51 lm 31.5 W 32.2 V 38.3 V 152 lm/w 143 lm/w 129 lm/w > 8 SLE G7 15mm 4lm 83 ADV 83/359 9 ma 5,8 lm 4,7 lm 31.5 W 32.2 V 38.3 V 159 lm/w 149 lm/w 134 lm/w > 8 SLE G7 15mm 4lm 835 ADV 835/359 9 ma 5,12 lm 4,74 lm 31.5 W 32.2 V 38.3 V 16 lm/w 15 lm/w 135 lm/w > 8 SLE G7 15mm 4lm 84 ADV 84/359 9 ma 5,22 lm 4,83 lm 31.5 W 32.2 V 38.3 V 163 lm/w 153 lm/w 138 lm/w > 8 SLE G7 15mm 4lm 927 ADV 927/359 9 ma 3,99 lm 3,69 lm 31.5 W 32.2 V 38.3 V 125 lm/w 117 lm/w 15 lm/w > 9 SLE G7 15mm 4lm 93 ADV 93/359 9 ma 4,13 lm 3,82 lm 31.5 W 32.2 V 38.3 V 129 lm/w 121 lm/w 19 lm/w > 9 SLE G7 15mm 4lm 935 ADV 935/359 9 ma 4,31 lm 3,99 lm 31.5 W 32.2 V 38.3 V 135 lm/w 127 lm/w 114 lm/w > 9 SLE G7 15mm 4lm 94 ADV 94/359 9 ma 4,53 lm 4,2 lm 31.5 W 32.2 V 38.3 V 142 lm/w 133 lm/w 12 lm/w > 9 SLE 15mm 4lm Operating mode HO at 1,2 ma SLE G7 15mm 4lm 827 ADV 827/359 1,2 ma 6,29 lm 5,79 lm 43.3 W 33.2 V 39.5 V 143 lm/w 134 lm/w 121 lm/w > 8 SLE G7 15mm 4lm 83 ADV 83/359 1,2 ma 6,55 lm 6,3 lm 43.3 W 33.2 V 39.5 V 149 lm/w 139 lm/w 125 lm/w > 8 SLE G7 15mm 4lm 835 ADV 835/359 1,2 ma 6,59 lm 6,6 lm 43.3 W 33.2 V 39.5 V 15 lm/w 14 lm/w 126 lm/w > 8 SLE G7 15mm 4lm 84 ADV 84/359 1,2 ma 6,72 lm 6,18 lm 43.3 W 33.2 V 39.5 V 153 lm/w 143 lm/w 129 lm/w > 8 SLE G7 15mm 4lm 927 ADV 927/359 1,2 ma 5,14 lm 4,73 lm 43.3 W 33.2 V 39.5 V 117 lm/w 19 lm/w 98 lm/w > 9 SLE G7 15mm 4lm 93 ADV 93/359 1,2 ma 5,33 lm 4,9 lm 43.3 W 33.2 V 39.5 V 121 lm/w 113 lm/w 12 lm/w > 9 SLE G7 15mm 4lm 935 ADV 935/359 1,2 ma 5,56 lm 5,11 lm 43.3 W 33.2 V 39.5 V 127 lm/w 118 lm/w 16 lm/w > 9 SLE G7 15mm 4lm 94 ADV 94/359 1,2 ma 5,86 lm 5,39 lm 43.3 W 33.2 V 39.5 V 133 lm/w 124 lm/w 112 lm/w > 9 1 See derating curves in data sheet section 2.3. 2 The detailed explanation, see data sheet section 3.1. 3 Tolerance range for optical and electrical data: ±1 %. 4 Assumed efficiency for the LED Driver is.9. 5 All values at tp = 65 C. 6 HE... high efficiency, NM... nominal mode, HO... high output. Colour rendering index CRI www.tridonic.com 5
1. Standards EN 6231 EN 62471 IEC 62717 IEC 61-4-2 UL 875 1.1 Photometric code Key for photometric code, e. g. 83 / 359 1 st digit 2 nd + 3 rd digit 4 th digit 5 th digit 6 th digit Luminous flux after 25% MacAdam Code CRI of the life-time (max.6h) Colour after 25% MacAdam Code Luminous flux temperature in of the 7 7 79 initial 7 7 % Kelvin x 1 life-time 8 8 89 8 8 % (max.6h) 9 9 9 9 % 1.2 Energy classification Type Forward current Energy classification 25 ma A++ SLE G7 9mm 12lm 83 ADV 35 ma A++ 25 ma A++ SLE G7 9mm 12lm 84 ADV 35 ma A++ 25 ma A+ SLE G7 9mm 12lm 927 ADV 35 ma A+ 5 ma A+ 25 ma A+ SLE G7 9mm 12lm 93 ADV 35 ma A+ 5 ma A+ 25 ma A++ SLE G7 9mm 12lm 94 ADV 35 ma A+ 5 ma A+ 35 ma A++ SLE G7 13mm 3lm 827 ADV 9 ma A+ 35 ma A++ SLE G7 13mm 3lm 83 ADV 9 ma A++ 35 ma A++ SLE G7 13mm 3lm 835 ADV 9 ma A++ 35 ma A++ SLE G7 13mm 3lm 84 ADV 9 ma A++ 35 ma A+ SLE G7 13mm 3lm 927 ADV 5 ma A+ 9 ma A+ 35 ma A++ SLE G7 13mm 3lm 93 ADV 5 ma A+ 9 ma A+ 35 ma A++ SLE G7 13mm 3lm 935 ADV 5 ma A+ 9 ma A+ 35 ma A++ SLE G7 13mm 3lm 94 ADV 9 ma A+ Type Forward current Energy classification SLE G7 15mm 4lm 827 ADV 9 ma A++ 1,2 ma A+ SLE G7 15mm 4lm 83 ADV 9 ma A++ 1,2 ma A++ SLE G7 15mm 4lm 835 ADV 9 ma A++ 1,2 ma A++ SLE G7 15mm 4lm 84 ADV 9 ma A++ 1,2 ma A++ 5 ma A+ SLE G7 15mm 4lm 927 ADV 9 ma A+ 1,2 ma A+ 5 ma A+ SLE G7 15mm 4lm 93 ADV 9 ma A+ 1,2 ma A+ SLE G7 15mm 4lm 935 ADV 9 ma A++ 1,2 ma A+ SLE G7 15mm 4lm 94 ADV 9 ma A+ 1,2 ma A+ 2. Thermical details 2.1 tp point, ambient temperature and life-time The temperature at tp reference point is crucial for the light output and life-time of a LED product. For SLE G7 a tp temperature of 65 C has to be complied in order to achieve an optimum between heat sink requirements, light output and life-time. Compliance with the maximum permissible reference temperature at the tp point must be checked under operating conditions in a thermally stable state. The maximum value must be determined under worst-case conditions for the relevant application. The tc and tp temperature of LED modules from Tridonic are measured at the same reference point. To check the tc / tp temperature, the temperature sensor has to be mounted on the PCB at the marked position as stated in the drawing.,85 3,75 LES 9 tc/tp 13,9 2.2 Storage and humidity LES 13 storage temperature -3... +8 C tc/tp Operation only in non condensing environment. Humidity during processing of the module should be between to 85 %. 1,5 5,4 tc/tp,925 LES 15 www.tridonic.com 6
2.3 Derating curves SLE G7 9mm 12lm xx ADVANCED If [ma] 6 5 4 3 2 1 45 55 65 75 85 95 15 115 Tc [ C] SLE G7 13mm 3lm xx ADVANCED If [ma] 12 1 8 6 4 2 SLE G7 15mm 4lm xx ADVANCED 14 12 1 8 45 55 65 75 85 95 15 115 Tc [ C] 2.4 Thermal design and heat sink The rated life of LED products depends to a large extent on the temperature. If the permissible temperature limits are exceeded, the life of the SLE G7 will be greatly reduced or the SLE G7 may be destroyed. 2.5 Heat sink values SLE G7 9mm 12lm xxx ADV ta tp Operating current Rth, hs-a 25 C 65 C 25 ma 4.6 K/W 35 C 65 C 25 ma 3.4 K/W 45 C 65 C 25 ma 2.2 K/W 25 C 65 C 35 ma 3.1 K/W 35 C 65 C 35 ma 2.3 K/W 45 C 65 C 35 ma 1.5 K/W 25 C 65 C 5 ma 2.1 K/W 35 C 65 C 5 ma 1.6 K/W 45 C 65 C 5 ma 1. K/W SLE G7 13mm 3lm xxx ADV ta tp Operating current Rth, hs-a 25 C 65 C 35 ma 3.4 K/W 35 C 65 C 35 ma 2.6 K/W 45 C 65 C 35 ma 1.7 K/W 25 C 65 C 5 ma 2.3 K/W 35 C 65 C 5 ma 1.7 K/W 45 C 65 C 5 ma 1.2 K/W 25 C 65 C 9 ma 1.2 K/W 35 C 65 C 9 ma.9 K/W 45 C 65 C 9 ma.6 K/W SLE G7 15mm 4lm xxx ADV ta tp Operating current Rth, hs-a 25 C 65 C 5 ma 2.4 K/W 35 C 65 C 5 ma 1.8 K/W 45 C 65 C 5 ma 1.2 K/W 25 C 65 C 9 ma 1.3 K/W 35 C 65 C 9 ma 1. K/W 45 C 65 C 9 ma.6 K/W 25 C 65 C 1,2 ma.9 K/W 35 C 65 C 1,2 ma.7 K/W 45 C 65 C 1,2 ma.5 K/W If [ma] 6 4 2 45 55 65 75 85 95 15 115 Tc [ C] Notes The actual cooling can differ because of the material, the structural shape, outside influences and the installation situation. A thermal connection between SLE G7 and heat sink with heat-conducting paste or heat conducting adhesive film is absolutely necessary. Additionally the SLE G7 has to be fixed on the heat sink with M3 screws to optimise the thermal connection. Use of thermal interface material with thermal conductivity of λ > 1 W/mK and layer thickness of interface material with max. 5 µm or a similar interface material where the quotient of layer thickness and thermal conductivity b < 5 µmmk/w. www.tridonic.com 7
3. Installation / wiring 3.1 Electrical supply/choice of LED Driver SLE G7 from Tridonic are not protected against overvoltages, overcurrents, overloads or short-circuit currents. Safe and reliable operation can only be guaranteed in conjunction with a LED Driver which complies with the relevant standards. The use of LED Drivers from Tridonic in combination with SLE G7 guarantees the necessary protection for safe and reliable operation. If a LED Driver other than Tridonic is used, it must provide the following protection: Short-circuit protection Overload protection Overtemperature protection SLE G7 must be supplied by a constant current LED Driver. Operation with a constant voltage LED Driver will lead to an irreversible damage of the module. Wrong polarity can damage the SLE G7. SLE G7 must not be operated with nonselv LED Driver. LES13 8 LES15 AWG 24 white-black 3 mm AWG 24 + white-red AWG 24 UL1569, wire cross-section.2.25 mm² AWG 24 + white-red 3.2 Wiring SLE G7 are basic isolated up to 6 V SELV against ground and can be mounted directly on earthed metal parts of the luminaire. If the max. output voltage of the LED Driver (also against earth) is above 6 V SELV, an additional isolation between LED module and heat sink is required (for example by isolated thermal pads) or by a suitable luminaire construction. At voltages > 6 V an additional protection against direct touch (test finger) to the light emitting side of the module has to be guaranteed. This is typically achieved by means of a non removable light distributor over the module. 8 AWG 24 white-black 3 mm AWG 24 UL1569, wire cross-section.2.25 mm² LES9 AWG 24 + white-red Wiring example L N + + 8 AWG 24 white-black Driver LC... 3 mm AWG 24 UL1569, wire cross-section.2.25 mm² www.tridonic.com 8
3.3 Mounting instruction SLE G7 from Tridonic which have to be installed on a heat sink have to be connected with heat-conducting paste or heat conducting adhesive film and fixed with M3 screws. The fixing/cooling surface must be cleaned by removing all dirt, dust and grease before installing the LED modules. None of the components of the SLE G7 (substrate, LED, electronic components etc.) may be exposed to tensile or compressive stresses. Max. torque for fixing:.3 Nm. The LED modules are mounted with 2 screws per module. In order not to damage the modules only rounded head screws and an additional plastic flat washer (notice working temperature) or rounded head screw with collar (ISO 738-2) with head diameter 6.9 mm must be used for LED modules without housing. For further information please refer to to the brochure entitled Technical Design-In-Guide SLE GEN7. Chemical substance may harm the LED module. Chemical reactions could lead to colour shift, reduced luminous flux or a total failure of the module caused by corrosion of electrical connections. Materials which are used in LED applications (e.g. sealings, adhesives) must not produce dissolver gas. They must not be condensation curing based, acetate curing based or contain sulfur, chlorine or phthalate. Avoid corrosive atmosphere during usage and storage. 3.4 EOS/ESD safety guidelines The device / module contains components that are sensitive to electrostatic discharge and may only be installed in the factory and on site if appropriate EOS/ESD protection measures have been taken. No special measures need be taken for devices/modules with enclosed casings (contact with the pc board not possible), just normal installation practice. For further information for EOS/ESD safety guidlines and the ESD classification please refer to the brochure entitled http://www.tridonic.com/esd-protection. www.tridonic.com 9
4. Life-time 4.1 Life-time, lumen maintenance and failure rate The light output of an LED Module decreases over the life-time, this is characterized with the L value. L7 means that the LED module will give 7 % of its initial luminous flux. This value is always related to the number of operation hours and therefore defines the life-time of an LED module. As the L value is a statistical value and the lumen maintenance may vary over the delivered LED modules. The B value defines the amount of modules which are below the specific L value, e.g. L7B1 means 1 % of the LED modules are below 7 % of the initial luminous flux, respectively 9 % will be above 7 % of the initial value. In addition the percentage of failed modules (fatal failure) is characterized by the C value. The F value is the combination of the B and C value. That means for F degradation and complete failures are considered, e.g. L7F1 means 1 % of the LED modules may fail or be below 7 % of the initial luminous flux. 4.2 Lumen maintenance Life-time declarations are informative and represent no warranty claim. Preliminary calculated lifetime data until LM8 test reports are available SLE G7 9mm 12lm ADVANCED Operating current tp temperature L9 / F1 L9 / F5 L8 / F1 L8 / F5 L7 / F1 L7 / F5 25 ma 35 ma 5 ma 65 C 5, h >55, h >55, h >55, h >55, h >55, h 85 C 5, h >55, h >55, h >55, h >55, h >55, h 15 C 26, h 37, h >55, h >55, h >55, h >55, h 65 C >55, h >55, h >55, h >55, h >55, h >55, h 85 C >55, h >55, h >55, h >55, h >55, h >55, h 15 C 13, h 2, h 31, h 49, h 51, h >55, h 65 C >55, h >55, h >55, h >55, h >55, h >55, h 85 C >55, h >55, h >55, h >55, h >55, h >55, h 15 C 13, h 2, h 31, h 49, h 51, h >55, h SLE G7 13mm 3lm ADVANCED Operating current tp temperature L9 / F1 L9 / F5 L8 / F1 L8 / F5 L7 / F1 L7 / F5 35 ma 5 ma 9 ma 65 C 5, h >55, h >55, h >55, h >55, h >55, h 85 C 5, h >55, h >55, h >55, h >55, h >55, h 15 C 26, h 37, h >55, h >55, h >55, h >55, h 65 C 5, h >55, h >55, h >55, h >55, h >55, h 85 C 5, h >55, h >55, h >55, h >55, h >55, h 15 C 26, h 37, h >55, h >55, h >55, h >55, h 65 C 37, h 51, h >55, h >55, h >55, h >55, h 85 C 37, h 51, h >55, h >55, h >55, h >55, h 15 C 13, h 2, h 31, h 49, h 5, h >55, h SLE G7 15mm 4lm ADVANCED Operating current tp temperature L9 / F1 L9 / F5 L8 / F1 L8 / F5 L7 / F1 L7 / F5 5 ma 9 ma 1,2 ma 65 C 5, h >55, h >55, h >55, h >55, h >55, h 85 C 5, h >55, h >55, h >55, h >55, h >55, h 15 C 26, h 37, h >55, h >55, h >55, h >55, h 65 C 5, h >55, h >55, h >55, h >55, h >55, h 85 C 5, h >55, h >55, h >55, h >55, h >55, h 15 C 26, h 37, h >55, h >55, h >55, h >55, h 65 C >55, h >55, h >55, h >55, h >55, h >55, h 85 C >55, h >55, h >55, h >55, h >55, h >55, h 15 C 13, h 2, h 31, h 49, h 51, h >55, h www.tridonic.com 1
5. Electrical values 5.1 Declaration of electrical parameters Irated... Nominal operating current the module is designed for. Imax... Max. permissible continuous operating current incl. The tolerances of the LED driver. Max. permissible LF current ripple... Max. output current of the LED driver incl. Tolerances and LF current ripple must not exceed this value. Max. permissible peak current... The max. output peak current of the LED driver must not exceed this value. 5.2 Forward voltage vs. tp temperature 1,2 1,15 1,1 1,5 VF [1] 1,,995,99,985,98,975 2 4 6 tp [ C] 8 1 12 14 The diagrams based on statistic values. The real values can be different. www.tridonic.com 11
6. Photometric characteristics 6.1 Coordinates and tolerances according to CIE 1931 The specified colour coordinates are measured integral after a settling time of 1 ms. The current impuls depends on the module type. Module type SLE G7 9mm 12lm xxx ADV SLE G7 13mm 3lm xxx ADV SLE G7 15mm 4lm xxx ADV Current impulse 35 ma 5 ma 9 ma The ambient temperature of the measurement is ta = 25 C. The measurement tolerance of the colour coordinates are ±.1. 2,7 K x y Centre.4599.416,43,425,42,415,41,45,4,395,39,44,445,45,455,46,465,47,475,48 MacAdam ellipse: 3SDCM CRI8: 1 CRI9: 1 8 8 Norm. intensity [%] 6 4 2 Norm. intensity [%] 6 4 2 4 45 5 55 6 65 7 75 8 4 45 5 55 6 65 7 75 8 Wavelength [nm] Wavelength [nm] www.tridonic.com 12
3, K x y Centre.43.416,42,415,41,45,4,395,39,385,38,41,415,42,425,43,435,44,445,45 MacAdam ellipse: 3SDCM CRI8: 1 CRI9: 1 8 8 Norm. intensity [%] 6 4 2 Norm. intensity [%] 6 4 2 4 45 5 55 6 65 7 75 8 4 45 5 55 6 65 7 75 8 Wavelength [nm] Wavelength [nm] www.tridonic.com 13
3,5 K x y Centre.453.397,41,45,4,395,39,385,38,375,37,38,385,39,395,4,45,41,415,42 MacAdam ellipse: 3SDCM CRI8: 1 CRI9: 1 8 8 Norm. intensity [%] 6 4 2 Norm. intensity [%] 6 4 2 4 45 5 55 6 65 7 75 8 4 45 5 55 6 65 7 75 8 Wavelength [nm] Wavelength [nm] www.tridonic.com 14
4, K x y Centre.3761.374,395,39,385,38,375,37,365,36,355,355,36,365,37,375,38,385,39,395 MacAdam ellipse: 3SDCM CRI8: 1 CRI9: 1 8 8 Norm. intensity [%] 6 4 2 Norm. intensity [%] 6 4 2 4 45 5 55 6 65 7 75 8 4 45 5 55 6 65 7 75 8 Wavelength [nm] Wavelength [nm] www.tridonic.com 15
6.2 Light distribution The optical design of the SLE product line ensures optimum homogeneity for the light distribution. relative intensity [%] 1 8 6 4 2-6 -5-3 -2-1 1-4 2 3 4 5 6 7 8-9 9 1 8 6 4 2 2 4 6 8 1 6.3 Relative luminous flux vs. tp temperature 1,2 1,1 rel. luminous flux 1,,9,8-4 -2 2 4 6 8 1 12 tp [ C] 7. Miscellaneous 7.1 Additional information Additional technical information at www.tridonic.com Technical Data Guarantee conditions at www.tridonic.com Services Life-time declarations are informative and represent no warranty claim. www.tridonic.com 16