Antistatic One-touch Fittings Tubing: Metric Size/Connection Thread: M, Rc, G, NPT, NPTF Series KA RoS One-touch fitting with antistatic prevention. One-touch IN/OUT connection. Possible to use from vacuum ( 0 kpa). Can be used in copper-free application. Flame resistance (Equivalent to UL- standard, material V-0) Surface resistance to 7 Ω Conductive resin is used for body and seals in fittings and. Seal Can be used for a wide range of pressures from low vacuum up to a pressure of 1 MPa. The use of a special profile ensures sealing and reduces resistance when the tube is inserted. Body (Black) O-ring Stud Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent). M, thread Chuck Large retaining force as large retaining force while holding force is increased by the collet. Collet Guide Tube Release button (Black) Light force for removal When the fitting is removed from the, the check and collet are released, thus preventing them from biting into the tube excessively. Principal Parts Material Body Stud Chuck Guide Collet, Release button Seal, O-ring C0, PBT C0 Stainless steel 0 Stainless steel 0, C0, PBT PBT NBR Stainless steel 0, NBR C0 is all electroless nickel plated. PBT parts have conductive ( to 7 Ω) and flame resistant applications. (UL- standard, V-0) Conductive NBR ( to 7 Ω) is used for seals. Tubing Tubing material Tubing O.D. Specifications Fluid Operating pressure range Proof pressure Ambient and fluid temperature Thread Seal (Thread portion) Copper-free Surface resistance Antistatic soft nylon, Antistatic polyurethane ø, ø, ø, ø, ø, ø Air 0kPa to 1MPa MPa 0 to 0 C thread JIS B 020 (Metric coarse thread) Brass parts are all electroless nickel plated. to 7 Ω (Thread portion) Model M-G2 (For M thread) M-G (For M thread) KQG-U (For thread) ow to Order for Thread KQG U01 for thread port size Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-70-Main Office: (0) -200-Outside Local Area: (00) 2-200-www.stevenengineering.com U01 U02 U0 U0 1 1 1 2
Antistatic One-touch Fittings Series KA Male Connector: KA <M, M> O.D. M thread Model ød L A M Soft M x 0. KA-M 7 1 2.1 M x 1 KA-M.. 1. 2. 1 KA-U01.. M x 0. KA0-M. 1 1 2 M x 1 KA0-M. 1 KA0-U01 1. 1.. 1 KA0-U02 1 1.. M x 0. KA0-M. 1 1 M x 1 KA0-M 1 1 KA0-U01 1. 1. 1 KA0-U02 1 1 1.1 1.1 KA0-U0.. 1 1 KA0-U01 2 20. 1 1 KA0-U02 1. 1. 1.0 1.0 KA0-U0 1. 1. 1 KA-U01 2 1 KA-U02 2. 2. KA-U0 2 1 1 1 2 KA-U0 1 2 1 KA-U02 0. 2. 1 KA-U0 1 2. 1..1.1 1 1 2 KA-U0 2. 1. 2 * Reference dimensions after thread installation. <M, M> K M KK D MS LQ MQR T Male Elbow: KAL <M, M> O.D. M thread Model ød1 L1 L2 A M ød2 Soft M x 0. KAL-M 1 1 M x 1 KAL-M.. 1. 1.. 2. 7 1 KAL-U01 1. M x 0. KAL0-M 1. 1.. M x 1 KAL0-M. 1 1 1 1 KAL0-U01 20 20..2.2 1 KAL0-U02 1. 1 M x 0. KAL0-M 1 1.. M x 1 KAL0-M 1. 1 KAL0-U01. 20.. 1 KAL0-U02 1.. 1 KAL0-U0 2 2. 1 1 KAL0-U01 KAL0-U02 1 1.2. 2. 2. 2 1. 1. 1 KAL0-U0 2. 2 1 KAL-U01 2 2. 1. 1. 2 1 KAL-U02 2. 0 2. KAL-U0 0. 2.0 2.0 2 1 2 KAL-U0 0. 1 KAL-U02. KAL-U0 2. 2 2..7.7 1 2 KAL-U0. * Reference dimensions after thread installation. <M, M> Precautions Be sure to read before handling. Refer to front matters and for Safety Instructions and pages 1 to 1 for Fittings and Tubing Precautions. Caution 1. Female thread portion connected with fitting must be grounded, otherwise static electricity will remain in the fittings and tubes. Grounded Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-70-Main Office: (0) -200-Outside Local Area: (00) 2-200-www.stevenengineering.com
Series KA Male Branch Tee: KAT <M, M> O.D. M thread Model ød1 ød2 L1 L2 A M Soft M x 0. KAT-M 1 1 M x 1 KAT-M.. 1. 1.. 2. 1 KAT-U01 1. M x 0. KAT0-M 1... M x 1 KAT0-M. 1 1 1 1 KAT0-U01 20..0.0 1 KAT0-U02 1 1 M x 0. KAT0-M 1 M x 1 KAT0-M 1. 1.. 7 1 KAT0-U01. 20.. 1 KAT0-U02 1 1. 1. 1 KAT0-U0 2 2. 2 1 KAT0-U01. 1 2 1 KAT0-U02 1 1.2 2. 1.2 1.2 1 KAT0-U0 2. 1 KAT-U01 2 2. 0 1 KAT-U02 2. 0 2. 2.0 2.0 KAT-U0 0. 1 2 KAT-U0 0. 1 1 KAT-U02. KAT-U0 2. 2 2..2.2 1 2 KAT-U0. Reference dimensions after thread installation. <M, M> Connection thread Male Run Tee: KAY <M, M> O.D. M thread Model ød1 ød2 L1 L2 A M Soft M x 0. KAY-M 1 2. M x 1 KAY-M.. 1. 1.. 2. 1 KAY-U01 1. M x 0. KAY0-M 1 1. 2... M x 1 KAY0-M. 1 1 1 KAY0-U01 20 1.. 1 KAY0-U02 1. 1 M x 0. KAY0-M 20 1 M x 1 KAY0-M 20. 1. 2.. 7 1 KAY0-U01.. 7. 1 KAY0-U02 1 20 7 1. 1. 1 KAY0-U0 2 2 1 KAY0-U01. 1 1. 1 KAY0-U02 1 1.2 2..7.7 1 KAY0-U0 2. 2. 1 KAY-U01 2. 0 1 KAY-U02 2. 7. 2. 2. 2. KAY-U0 1 2 KAY-U0 0 1 1 KAY-U02. KAY-U0 2. 2 0... 1 2 KAY-U0 1. Reference dimensions after thread installation. <M, M> Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-70-Main Office: (0) -200-Outside Local Area: (00) 2-200-www.stevenengineering.com
Antistatic One-touch Fittings Series KA Branch Y : KAU <M, M> O.D. M thread Model ød L P A M Soft M x 0. KAU-M 2.2 2.2 M x 1 KAU-M... 1.. 1 KAU-U01. 2. M x 0. KAU0-M. 2.2 2.2 M x 1 KAU0-M. 0. 1 1 KAU0-U01.2.2 1 KAU0-U02 1 2 1 M x 0. KAU0-M 2. M x 1 KAU0-M 1 2.2 2.2 1 KAU0-U01.... 1 1 KAU0-U02 1 1. 1. KAU0-U0 0 2 1 1 KAU0-U01 KAU0-U02 1.2 0. 2 1.2..7.7 2 2 KAU0-U0 1.. 1 KAU-U02 1 KAU-U0 7. 1. 2. 2. 1 2 KAU-U0 1 1 1 KAU-U02 1 KAU-U0.. 2 1 2 KAU-U0 2.. Reference dimensions after thread installation. <M, M> ø ø.2 ø ø.2 K M KK D MS LQ MQR T Straight on: KA O.D. (mm) Model ød L M KA-00.. 1.. 2. KA0-00. 2. 1.. KA0-00.. 1.1 1.1 KA0-00 KA-00 KA-00 1.2. 2.. 1.0 2..1 1.0 2..1 1 Different Diameter Straight: KA a b Model ød L M1 M2 KA-0. 2. 1. 1 2.7 KA0-0.. 1.2.2 KA0-0 1.2..7.7 KA0- KA- 2. 1.7 2.2 1.7 2.2 1 a b Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-70-Main Office: (0) -200-Outside Local Area: (00) 2-200-www.stevenengineering.com 7
Series KA on Elbow: KAL Model ød L Q M KAL-00... 1.. 2. KAL0-00. 1. 1.2.2 KAL0-00. 20... KAL0-00 KAL-00 KAL-00 1.2 2. 2.. 7. 1. 2.0.7 1. 2.0.7 on Tee: KAT Model ød L Q M KAT-00... 1.. 2. KAT0-00. 1. 1.. KAT0-00. 20. 1. 1. KAT0-00 KAT-00 KAT-00 1.2 2. 2.. 7..7 2...7 2.. 7 1 2 2 x applicable on Y : KAU Model ød L1 L2 P Q M KAU-00... 1.. 2. KAU0-00. 1..7 1.2.2 KAU0-00. 7 20..7 1. 1. KAU0-00 KAU-00 KAU-00 1.2 2. 1 2.. 0 1.2 1.7 1.1 1.1.7 2...7 2.. 7 1 x applicable Plug-in Reducer: KAR fitting size Model ød L A M (mm 2 ) ød KAR-0.. 1.. 2. KAR0-0.. 1.. KAR0-0. 1 1.. 2.0 KAR0-... KAR0-0 7 2. KAR0-.. 1.1 1.1.0 KAR0-2 20.7 KAR0-1.0 1.2 20 1.0 1.0 KAR0-2. KAR-. 2. 2. fitting size ød Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-70-Main Office: (0) -200-Outside Local Area: (00) 2-200-www.stevenengineering.com