MAKING MODERN LIVING POSSIBLE Eliminator Liquid line filter driers, Type DCL and DML Flare connection Solder connection (copper) REFRIGERATION & AIR CONDITIONING DIVISION Technical leaflet
Contents Page Introduction........................................................................................ Features............................................................................................ Approvals.......................................................................................... Technical data......................................................................................4 Technical data and capacities.......................................................................4 Ordering........................................................................................... Identification....................................................................................... Selection........................................................................................... Selection example.................................................................................. Design and function................................................................................9 Dimensions and weights - Flare connections........................................................9 Dimensions and weights - Solder connections..................................................... Conversions...................................................................................... 2 2 DKRCC.PD.E00.B. / 20H44 Danfoss A/S (AC-DSL / SKT), 09-200
Introduction EVR Eliminator liquid line filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid particles. With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive impurities. There are two types of Eliminator cores. Type DML driers have a core composition of 00% Molecular Sieve, while type DCL contain 0% Molecular Sieve with 20% activated alumina. All Eliminator driers have a solid core with binding material held to an absolute minimum. Core selection is primarily based on the refrigerant oil used in the system. Eliminator type DML, with a solid core of 00% Molecular Sieve, is optimized for use with HFC refrigerants and polyolester (POE) or polyalkyl glycol (PAG) oils. Type DML driers are designed for applications requiring high water adsorption, and can be used with any manufacturer s compressor. Because type DML driers contain no activated alumina, oil additives will not be depleted. Eliminator type DCL, with a solid core of 0% Molecular Sieve and 20% activated alumina, is the drier of choice for systems with HCFC and CFC refrigerants and mineral or alkyl benzene oils. Type DCL driers are particularly suited for systems that operate at high condensing temperatures and require high drying capacity. Features The Core Type DML 00% Å Molecular Sieve core. High drying capacity minimizing the risk of acid formation (hydrolysis). Optimized for HFC refrigerants (R4a, R404A, R40A, etc.) with POE or PAG oils. Compatible with R. Will not deplete oil additives. Type DCL 0% Å Molecular Sieve with 20% activated alumina. Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity. Optimized for CFC and HCFC refrigerants (R, R02, etc.) with mineral or alkyl benzene oils. Compatible with HFC s and refrigerant blends. The Shell UL approved for MWP up to 42 bar ( psig) Available with solder (copper) and flare connections. Compact cubic inches drier ideal for refrigeration and air conditioning units. Corrosion resistant powder-painted finish. Can be used in all environments including marine applications. Allows installation with any orientation provided the arrow is in the flow direction. Available in sizes from to cubic inches. The Filter 2 μm (0.00 in.) filter provides high retention with minimal pressure drop. Thermally stable up to 20 C (20 F) Approvals UL file no. SA 9 PED 9/EC - ap Danfoss A/S (AC-DSL / SKT), 09-200 DKRCC.PD.E00.B. / 20H44
Technical data Surface and volume Acid capacity Temperature range Acid Filter capacity [oz.] DCL 0 0.02 DCL 0 0.0 DCL 0 0.0 DCL 0. DCL 0 0.2 DCL 4 0. DCL 0 0.4 DCL 0. 40 to 0 C ( 40 to 0 F) Solid core surface Solid core volume Filter drier volume (shell volume) Filter drier volume (net. volume) Filter [in 2 ] [in ] [fl. oz.] [fl. oz.] DML/DCL 0 2..2 DML/DCL 0 4.2 DML/DCL 0 20. 2. DML/DCL 4 4 4. DML/DCL 0 9 0 24.. DML/DCL 4 9 42 2. 9. DML/DCL 0 0 4..9 DML/DCL..2 Technical data and capacities DML Drying and liquid capacity - Type DML R4a, R0, R404A, R, R40C, R40A ) Drying capacity is based on following moisture content test standards before and after drying: R4a: From 00 ppm W to ppm W. If drying to 0 ppm W is required, reduce stated capacities by %. R404A, R0: From 020 ppm W to 0 ppm W. R40C: From 020 ppm W to 0 ppm W. R40A: From 00 ppm W to 0 ppm W. R: From 00 ppm W to 0 ppm W in accordance with ARI 0-. 2 ) Given in accordance with ARI 0- for t e = C ( F), t c = 0 C ( F) and Δp = 0.0 bar ( psig). Type DML02/02s DML 02.s DML0/0s DML04s DML02/02s DML 02.s DML0/0s DML04s DML0s DML02/02s DML 02.s DML0/0s DML04/04s DML0/0s DML2s DML 2.s DML/s DML4s DML/s DML/s DMLs DML0/0s DML04/04s DML0/0s DML0/0s DML0s DML09s DML4 DML444s DML4s DML4s DML49s DML04s DML0s DML09s DMLs DML9s R4a Drying capacity [lbs refrigerant] ) Liquid capacity [TR] 2 ) Max. R404A R0 R, R40C R40A F 2 F F 2 F F 2 F 2. 2. 2. 2...... 2. 2. 2. 2. 2. 2. 2. 2. 2. 2. 2..4.4.4.4.4 249. 249. 249. 2. 2..0.0.0.0..... 2. 2. 2. 2. 2..2.2.2.2.2.2.2 9.0 9.0 9.0 9.0 9.0 9.0..... 2.9 2.9 2.9 0. 0..... 2. 2. 2. 2. 2. 44. 44. 44. 44. 44. 20.9 20.9 20.9 20.9 20.9 20.9 2. 2. 2. 2. 2. 40.9 40.9 40.9.2.2..... 2. 2. 2. 2. 2. 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.4 2.4 2.4 2.4 2.4 2.4 4. 4. 4. 4. 4. 2. 2. 2. 0. 0...... 2. 2. 2. 2. 2. 2. 2. 2. 2. 2. 2..4.4.4.4.4 2. 2. 2. 2. 2..4.4.4.4.4 24. 24. 24. 24. 24. 0. 0. 0. 0. 0. 0. 0. 0.9 0.9 0.9 0.9 0.9 0.9..... 2. 2. 2. 2. 2. R4a 2. 4.9.9 2... 9. 2..4.4 2... 2. 2. 2..0 2.. 9.. 2.4 24.9 2.4 2.9 R404A R0.4. 4.9.4...4 2...4 2. 4... 4.. 2.9 2.9 2.9.. 0.....4.. R R40C R40A 2..4.4 2. 2..4 0. 2...0.. 2...9.4... 9. 0.0. 2. 2. 2.4 2. 2. 29. Working Pressure PS [psig] 0 0 0 0 4 0 4 0 4 0 4 4 DKRCC.PD.E00.B. / 20H44 Danfoss A/S (AC-DSL / SKT), 09-200
Technical data and capacities ) Drying capacity is based on following moisture content test standards before and after drying: R4a: From 00 ppm W to ppm W. If drying to 0 ppm W is required, reduce stated capacities by %. R404A, R0: From 020 ppm W to 0 ppm W. R40C: From 020 ppm W to 0 ppm W. R40A: From 00 ppm W to 0 ppm W. R: From 00 ppm W to 0 ppm W in accordance with ARI 0-. R2: From ppm W to ppm W in accordance with ARI 0-. R02: From 020 ppm W to 0 ppm W in accordance with ARI 0-. 2 ) Given in accordance with ARI 0- for t e = C ( F), t c = 0 C ( F) and Δp = 0.0 bar ( psig). DCL Drying and liquid capacity - Type DCL Type DCL02/02s DCL 02.s DCL0/0s DCL02/02s DCL 02.s DCL0/0s DCL02/02s DCL 02.s DCL0/0s DCL04/04s DCL2s DCL 2.s DCL/s DCL4s DCL/s DCL/s DCLs DCL0/0s DCL04/04s DCL0/0s DCL0/0s DCL0s DCL09s DCL4 DCL444s DCL4s DCL4s DCL49s DCL04s DCL0s DCL09s DCLs DCL9s Type DCL02/02s DCL 02.s DCL0/0s DCL02/02s DCL 02.s DCL0/0s DCL02/02s DCL 02.s DCL0/0s DCL04/04s DCL2s DCL 2.s DCL/s DCL4s DCL/s DCL/s DCLs DCL0/0s DCL04/04s DCL0/0s DCL0/0s DCL0s DCL09s DCL4 DCL444s DCL4s DCL4s DCL49s DCL04s DCL0s DCL09s DCLs DCL9s R4a R4a, R0, R404A, R40C, R40A Drying capacity [lbs refrigerant] ) Liquid capacity [TR] 2 ) Max. R404A R0 R40C R40A F 2 F F 2 F F 2 F... 2 2 2 2 2.9 2.9 2.9 2.9 2.9 2.9 2.9 0. 0. 0. 0. 0. 0. 4. 4. 4. 4. 4. 20.2 20.2 20.2 2. 2..2.2.2 9. 9. 9. 9. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4.....2.2.4.4.4 2 2 2........... 9. 9. 9. 9. 9. 9. 2. 2. 2. 2. 2. 0. 0. 0. 4.4 4.4 2. 2. 2..... 44. 44. 44. 44. 44. 44. 44. 2. 2. 2. 2. 2. 0. 0. 0. 2. 2..2.2.2 20.9 20.9 20.9 20.9 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 4. 9.2 9.2 9.2 2. 2. 2. 2. 2. 9. 9. 9. 9. 44. 44. 44. 44. 44. 44. 44. 2. 2. 2. 2. 2. 0. 0. 0. 24.9 24.9 R4a 2. 4.9 2.. 2..4.4 2..4. 2. 2. 2..0 2.. 9.. 2.9 2.9 2.4 24.9 2.4 2.9 R404A R0.4..4.4 2...4 2. 4..... 4.. 2.9 2.9 2.9.. 0.....4.. R40C R40A 2..4 2. 2..4 2...0. 2...9.4.4.4. 9. 0.0. 2. 2. 2.4 2. 2. 29. Working Pressure PS [psi] 0 0 0 0 4 0 4 0 4 0 4 R, R2, R02 Drying capacity [lbs refrigerant] ) Liquid capacity [TR] 2 ) Max. Working R R2 R02 Pressure R R2 R02 PS F 2 F F 2 F F 2 F [psi] 2. 2. 2. 9. 9. 9. 9. 44. 44. 44. 44. 44. 44. 44. 92. 92. 92. 92. 92. 92. 0. 0. 0. 0. 0..2.2.2 24. 24..0.0.0.... 4.9 4.9 4.9 4.9 4.9 4.9 4.9 2. 2. 2. 2. 2..4.4.4 242. 242.... 44. 44. 44..... 4. 4. 4. 4. 4. 4. 4. 0. 0. 0. 0. 0. 0..2.2.2.4.4... 44. 44. 44..... 4. 4. 4. 4. 4. 4. 4. 0. 0. 0. 0. 0. 0..2.2.2.4.4.4.4.4 2 2 2.....2.2.2.2.2.2.2...... 0.0 0.0 0.0 0.0 0.0 0. 0. 0..0.0.0.... 9. 9. 9. 9. 9. 9. 9. 2. 2. 2. 2. 2. 2. 0.2 0.2 0.2 0.2 0.2... 0.0 0.0 2..4 2. 2..4 2. 2..0. 2...9.4.4.4. 9..4 0.0. 2. 2.. 2. 2 29.. 2.. 2. 4.. 2. 4... 2...9 0.0 0.0 0.0 4.9. 0. 4. 4. 4...4 2. 2. 2...0 20.9 9...4..4 2..4 2...4 2. 4..... 4.. 2.9 2.9 2.9.. 0....4.4.0.9 0 0 0 0 4 0 4 0 4 0 4 Danfoss A/S (AC-DSL / SKT), 09-200 DKRCC.PD.E00.B. / 20H44
Ordering Flare Type Conn. Multipack Industrialpack in. mm Code no. Code no. Qty. DCL 02 DCL 02 DCL 0 DCL 0 DCL 02 DCL 0 DCL 02 DCL 0 DCL 04 DCL 2 DCL DCL 4 DCL DCL DCL 0 DCL 04 DCL 0 DCL 0 DCL 4 DCL 44 DCL 4 / / 0 0 / 0 / 0 / 2 2 / 0 / 2 2 / 9 / 0 / 2 2 / 9 / 0 / 2 2 / * Wire mesh in filter drier outlet 02Z000* 02Z0 02Z00* 02Z09 02Z002 02Z00 02Z004 02Z00 02Z00 02Z00 02Z00 02Z009 02Z00 02Z0 02Z002 02Z00 02Z004 02Z0 02Z00 02Z002 02Z00 02Z0 02Z09 02Z002 02Z00 02Z004 02Z00 02Z00 02Z00 02Z00 02Z009 02Z00 02Z0 02Z04 02Z DCL 2 2 Solder (copper) DCL Type Conn. Multipack Industrialpack Conn. Multipack Industrialpack in. Code no. Code no. Qty. mm Code no. Code no. Qty. DCL 02s DCL 02.s DCL 0s DCL 02s DCL 02.s DCL 0s DCL 02s DCL 02.s DCL 0s DCL 04s DCL 2s DCL 2.s DCL s DCL 4s DCL s DCL s DCL s DCL 0s DCL 04s DCL 0s DCL 0s DCL 0s DCL 09s DCL 44s DCL 4s DCL 4s DCL 49s DCL 04s DCL 0s DCL 09s DCL s DCL 9s / / / / * Wire mesh in filter drier outlet 02Z0* 02Z04 02Z0 02Z0 02Z4 02Z09 02Z0 02Z 02Z02 02Z02 02Z02 02Z 02Z029 02Z02 02Z0 02Z00 02Z04 02Z000 02Z00 02Z002 02Z00 02Z004 02Z00 02Z004 02Z00 02Z00 02Z00 02Z024 02Z00 02Z00 02Z0 02Z0 02Z0* 02Z04* 2 02Z0 02Z09 02Z0 02Z02 02Z02 02Z02 02Z0 02Z00 02Z02 02Z04 2 0 0 0 2 0 2 9 0 2 2 2 2 2 2 2 02Z02* 02Z04 02Z0 02Z0 02Z4 02Z020 02Z02 02Z 02Z024 02Z02 02Z02 02Z 02Z00 02Z0 02Z0 02Z00 02Z04 02Z09 02Z09 02Z002 02Z02 02Z004 02Z0200 02Z0 02Z00 02Z00 02Z0202 02Z0 02Z00 02Z0204 02Z0 02Z020 02Z02* 02Z04* 2 02Z0 02Z020 02Z02 02Z00 02Z0 02Z9 02Z02 02Z04 2 DKRCC.PD.E00.B. / 20H44 Danfoss A/S (AC-DSL / SKT), 09-200
Ordering (cont.) Flare Type DML 02 DML 0 DML 0 DML 02 DML 0 DML 02 DML 0 DML 04 DML 0 DML 2 DML DML 4 DML DML DML 0 DML 04 DML 0 DML 0 DML 4 DML 44 DML 4 DML Conn. Multipack Industrialpack in. mm Code no. Code no. Qty. / / 0 0 / 0 / 0 / 2 2 / / 0 / 2 2 / 9 / 0 / 2 2 / 9 / 0 / 2 2 / * Wire mesh in filter drier outlet 02Z0* 02Z0* 02Z090 02Z0 02Z0 02Z09 02Z040 02Z04 02Z0 02Z042 02Z04 02Z044 02Z04 02Z04 02Z0049 02Z000 02Z00 02Z09 02Z00 02Z009 02Z00 02Z0* 02Z0* 02Z090 02Z0 02Z0 02Z09 02Z040 02Z04 02Z0 02Z042 02Z04 02Z044 02Z04 02Z04 02Z049 02Z00 02Z0 02Z9 02Z0 02Z09 02Z0 2 2 Solder (copper) DML Type Conn. Multipack Industrialpack Conn. Multipack Industrialpack in. Code no. Code no. Qty. mm Code no. Code no. Qty. DML 02s DML 02.s DML 0s DML 04s / DML 02s DML 02.s / DML 0s DML 04s DML 0s DML 02s DML 02.s / DML 0s DML 04s DML 0s DML 2s DML 2.s / DML s DML 4s DML s DML s DML s DML 0s DML 04s DML 0s DML 0s DML 0s DML 09s DML 44s DML 4s DML 4s DML 49s DML 04s DML 0s DML 09s DML s DML 9s * Wire mesh in filter drier outlet 02Z04* 02Z049 02Z00 02Z2 02Z0 02Z 02Z04 02Z0 02Z00 02Z0 02Z 02Z0 02Z0 02Z02 02Z0 02Z9 02Z04 02Z0 02Z0 02Z0 02Z09 02Z00 02Z00 02Z009 02Z000 02Z00 02Z002 02Z0 02Z02 02Z0 02Z04 02Z04 02Z00 02Z004 02Z0 02Z0 02Z04* 02Z049 02Z00* Danfoss A/S (AC-DSL / SKT), 09-200 DKRCC.PD.E00.B. / 20H44 2 02Z04 02Z0 02Z 02Z4 02Z0 02Z0 02Z0 02Z09 02Z0 02Z 02Z4 02Z 02Z 2 4 0 2 0 2 0 2 0 2 9 0 2 9 2 2 2 2 2 2 02Z04* 02Z049 02Z0 02Z2 02Z02 02Z 02Z0 02Z099 02Z00 02Z0 02Z 02Z09 02Z00 02Z02 02Z02 02Z9 02Z0 02Z0 02Z0 02Z0 02Z09 02Z09 02Z099 02Z009 02Z000 02Z00 02Z020 02Z0 02Z02 02Z0 02Z020 02Z09 02Z00 02Z020 02Z0 02Z020 02Z04* 02Z049 02Z0* 02Z02 2 02Z0 02Z0 02Z0 02Z09 02Z0 02Z 02Z 2 4
Identification Example for type codes D C L 0 s Type codes Filter drier Solid core D C M Application L Liquid line Size (volume) 0 0 0 0 4 0 Connection (filter connection in / of an inch increments) Connection type 2 2. 4 9 (blank) s 0 / 20% composite core 00% Molecular Sieve core in in in in 0 in 4 in 0 in in in. / mm / in. / mm / in. / 0 mm / 2 in. / 2 mm / in. / mm in. / (9) mm / in. / mm / in. / 2 mm Flare connection Solder connection Selection Type selection is made considering the application ) For CFC systems, DCL filter driers are recommended. In these systems, circumstances may require the use of a filter drier with acid adsorbing properties. 2 ) Use of filter driers containing activated alumina are not recommended in systems with oils containing additives. Refrigerant Oil DCL DML HFC Can be used Recommended HCFC Recommended Can be used CFC Recommended Not recommended ) Mineral or AB Recommended Can be used POE or PAG, pure Can be used Recommended POE or PAG, with additives Not recommended 2 ) Recommended Selection example Select the appropriate type (DML or DCL) based on refrigerant and oil type. Then select the dri er size based on the ad sorp tion and liquid ca pac i ty required. a. Amount of charge: lbs R4a at t L = F To dry lbs R4a at F from 00 to 0 ppm moisture, a DML is necessary. b. Cooling capacity: Q e =. TR To obtain a mass flow corresponding to. TR cooling capacity with a DML filter drier, a / inch connection must be cho sen. Larger connections can be chosen in accordance with the liquid line dimension. c. Result DML or DML s can be used. If the initial moisture content is very small or a planned change of the filter drier is considered, a smaller filter drier size can be chosen. Type DML 02/02s DML 02.s DML 0/0s DML 04s DML 2s DML 2.s DML /s DML 4s DML /s DML /s DML s R4a Drying capacity [lbs refrigerant] ) Liquid capacity [tons] 2 ) Max. R404A R0 R, R40C R40A F 2 F F 2 F F 2 F 2. 2. 2. 2..0.0.0.0.2.2.2.2.2.2.2.... 2.9 2.9 2.9 2.9 2.9 2.9 2.9 0. 0. 0. 0. 0. 0. 0. R4a 2. 4.9.9 2... 2. 2. 2. R404A R0.4. 4.9.4 2. 4... R R40C R40A 2..4.4 2...9.4.. Working Pressure PS [psig] 0 0 DKRCC.PD.E00.B. / 20H44 Danfoss A/S (AC-DSL / SKT), 09-200
Design and function DML / DCL 0 DML / DCL 0, 4 DML / DCL 0 DML / DCL 0,. Inlet 2. Spring. Solid core 4. Polyester mat. Perforated plate. Seal cap, flare connection. Seal cap, solder connection DML / DCL 0, The relatively large diameter of the filter drier means that the liquid flow velocity is suitably low and the pressure drop minimal. Powder formation is eliminated because the solid core grains are bonded and cannot move against each other. Dimensions and weights Flare connections Type A A A 2 L D D 2 Weight DCL/DML 02 in. 0..9 4...9 0.44 lbs DCL/DML 0 in. 0..9 4.4..9 0. lbs Danfoss A/S (AC-DSL / SKT), 09-200 DKRCC.PD.E00.B. / 20H44 9
Dimensions and weights (cont.) Flare connections Type A A A 2 L D D 2 Weight DCL/DML 02 in. 2.9 0.9.99 4.9 2.2 2. 0. lbs DCL/DML 0 in. 2.9 0.9.99.20 2.2 2. 0.92 lbs Type A A A 2 L D D 2 Weight DCL/DML 02 in..9.99.99. 2.2 2. 0. lbs DCL/DML 0 in..9.99.99. 2.2 2. 0.9 lbs DCL/DML 04 in..9.99.99.4 2.2 2..0 lbs DML 0 in..9.99.99.9 2.2 2..4 lbs DCL/DML 2 in. 4. 2. 2..0. 2.99.4 lbs DCL/DML in. 4. 2. 2... 2.99.0 lbs DCL/DML 4 in. 4. 2. 2..9. 2.99.9 lbs DCL/DML in. 4. 2. 2..24. 2.99 0 lbs DCL/DML in. 4. 2. 2.. 2.99 2. lbs Type A A A 2 L D D 2 Weight DCL/DML 0 in..2 - - 9.. 2.99 2.9 lbs DCL/DML 04 in..2 - - 9.. 2.99.04 lbs DCL/DML 0 in..2 - - 0.24. 2.99.2 lbs DCL/DML 0 in..2 - - 0.. 2.99.2 lbs DCL/DML 4 in.. - - 9...0 9 lbs DCL/DML 44 in.. - - 2..0 4.20 lbs DCL/DML 4 in.. - - 0.2..0 4.29 lbs 0 DKRCC.PD.E00.B. / 20H44 Danfoss A/S (AC-DSL / SKT), 09-200
Dimensions and weights (cont.) Solder connections Type A A A 2 B L D D 2 Weight DCL/DML 02s in. 0..9.2...9 0.9 lbs DCL/DML 02.s in. 0..9. 2..9 0.42 lbs DCL/DML 0s in. 0..9. 9..9 0.42 lbs DCL/DML 04s in. 0..9.4 4.2..9 0.44 lbs Type A A A 2 B L D D 2 Weight DCL/DML 02s in. 2.9 0.9.99. 4.2 2.2 2. 0. lbs DCL/DML 02.s in. 2.9 0.9.99. 4. 2.2 2. 0.4 lbs DCL/DML 0s in. 2.9 0.9.99.0 4.4 2.2 2. 0.4 lbs DML 04s in. 2.9 0.9.99. 4. 2.2 2. 0. lbs DML 0s in. 2.9 0.9.99.90 4.4 2.2 2. 0. lbs Type A A A 2 B L D D 2 Weight DCL/DML 02s in..9.99.99 4..24 2.2 2. 0.4 lbs DCL/DML 02.s in..9.99.99 4.9.9 2.2 2. 0. lbs DCL/DML 0s in..9.99.99 4.2.4 2.2 2. 0. lbs DCL/DML 04s in..9.99.99. 2.2 2. 0. lbs DML 0s in..9.99.99 4.92. 2.2 2. 0.90 lbs DCL/DML 2s in. 4. 2. 2. 4.9.9. 2.99.9 lbs DCL/DML 2.s in. 4. 2. 2..04.. 2.99.2 lbs DCL/DML s in. 4. 2. 2..0.. 2.99.2 lbs DCL/DML 4s in. 4. 2. 2...9. 2.99.4 lbs DCL/DML s in. 4. 2. 2..2.. 2.99. lbs DCL/DML s in. 4. 2. 2...9. 2.99.0 lbs DCL/DML s in. 4. 2. 2.... 2.99. lbs Danfoss A/S (AC-DSL / SKT), 09-200 DKRCC.PD.E00.B. / 20H44
Dimensions and weights (cont.) Solder connections Type A A A 2 B L D D 2 Weight DCL/DML 0s in..2 - -.0 2. 2.99 2.4 lbs DCL/DML 04s in..2 - -..9. 2.99 2. lbs DCL/DML 0s in..2 - -.2 9.2. 2.99 2. lbs DCL/DML 0s in..2 - -.0. 2.99 2.9 lbs DCL/DML 0s in..2 - -. 9.. 2.99 2.9 lbs DCL/DML 09s in..2 - -. 9.0. 2.99 2.99 lbs DCL/DML 44s in.. - -.9 9.02..0 4.4 lbs DCL/DML 4s in.. - -. 9.2..0 4.49 lbs DCL/DML 4s in.. - -.9 9.0..0 4. lbs DCL/DML 49s in.. - -.9..0 lbs DCL/DML 04s in..2 - - 9 4.92. 2.99. lbs DCL/DML 0s in..2 - - 4.29 4.. 2.99.2 lbs DCL/DML 09s in..2 - - 9 4.. 2.99.2 lbs DCL/DML s in.. - - 4....0.44 lbs DCL/DML 9s in.. - - 4..9..0.4 lbs Conversions (lbs of refrigerant (Initial PPM of water - Final PPM of water)) Drops of water = 0 See ARI standard 0- for recommended initial and final PPM values for different refrigerants. 2 DKRCC.PD.E00.B. / 20H44 Danfoss A/S (AC-DSL / SKT), 09-200