Test Report No. SH9202593/CHEM Date: Oct. 22, 2009 Page 1 of 5 ROGERS CORPORATION 245 WOODSTOCK RD. WOODSTOCK, CT 06281 The following sample(s) was/were submitted and identified by/on behalf of the client as: Sample Name : HT-6220 SGS Ref No. : 10044736-1 Sample Receiving Date : Oct.19, 2009 Testing Period : Oct.19 22, 2009 Test Requested : (1) In accordance with the RoHS Directive 2002/95/EC, and its amendment directives. (2) To determine the Halogen- Fluorine, Chlorine, Bromine, Iodine Content in the submitted sample. Test Method : (1) With reference to IEC 62321:2008 (1-1) Determination of Cadmium by ICP-OES. (1-2) Determination of Lead by ICP-OES. (1-3) Determination of Mercury by ICP-OES. (1-4) Determination of Hexavalent Chromium by Colorimetric Method. (1-5) Determination of PBBs and PBDEs by GC/MS. (2) With reference to EN 14582: 2007. (2-1) Determination of Fluorine by Ion Chromatograph (IC) method. (2-2) Determination of Chlorine by Ion Chromatograph (IC) method. (2-3) Determination of Bromine by Ion Chromatograph (IC) method. (2-4) Determination of Iodine by Ion Chromatograph (IC) method. Test Results Conclusion : Please refer to next pages : (1) Based on the performed tests on submitted samples, the results comply with/ the RoHS Directive 2002/95/EC and its subsequent amendments. Signed for and on behalf of SGS-CSTC Chemical Laboratory Sandy Hao Lab Manager
Test Report No. SH9202593/CHEM Date: Oct. 22, 2009 Page 2 of 5 Test results by chemical method (Unit: mg/kg) (1) Cadmium, Lead, Mercury, Hexavalent Chromium, PBBs / PBDEs Content Test Item(s): Method RoHS 1 MDL (refer to) Limit Cadmium(Cd) (1-1) ND 2 100 Lead (Pb) (1-2) ND 2 1000 Mercury (Hg) (1-3) ND 2 1000 Hexavalent Chromium (CrVI) by alkaline extraction (1-4) ND 2 1000 Sum of PBBs ND - 1000 Monobromobiphenyl ND 5 - Dibromobiphenyl ND 5 - Tribromobiphenyl ND 5 - Tetrabromobiphenyl ND 5 - Pentabromobiphenyl ND 5 - Hexabromobiphenyl ND 5 - Heptabromobiphenyl ND 5 - Octabromobiphenyl ND 5 - Nonabromobiphenyl ND 5 - Decabromobiphenyl ND 5 - (1-5) Sum of PBDEs ND - 1000 Monobromodiphenyl ether ND 5 - Dibromodiphenyl ether ND 5 - Tribromodiphenyl ether ND 5 - Tetrabromodiphenyl ether ND 5 - Pentabromodiphenyl ether ND 5 - Hexabromodiphenyl ether ND 5 - Heptabromodiphenyl ether ND 5 - Octabromodiphenyl ether ND 5 - Nonabromodiphenyl ether ND 5 - Decabromodiphenyl ether ## ND 5 - (2) Halogen- Fluorine, Chlorine, Bromine, Iodine Content Method Test Item(s): 1 MDL (refer to) Fluorine(F) (2-1) ND 50 Chlorine(Cl) (2-2) ND 50 Bromine(Br) (2-3) ND 50 Iodine(I) (2-4) ND 50
Test Report No. SH9202593/CHEM Date: Oct. 22, 2009 Page 3 of 5 Test Part Description: 1. Black rubber sheet part Note: (1) mg/kg = ppm (2) ND = Not Detected (3) MDL = Method Detection Limit (4) ##=The exemption of DecaBDE in polymeric application according 2005/717/EC was overruled by the European Court of Justice by its decision of 01.04.2008. Subsequently DecaBDE is included in the sum of PBDE after 01.07.2008. (5) - = Not Regulated (6) The maximum permissible limit is quoted from the document 2005/618/EC amending RoHS directive 2002/95/EC Halogen Measurement Flowchart for sample ATTACHMENTS Sample cutting/preparation Sample weighting Combustion in oxygen bomb Dissolved in an absorption solution Tested by Checked by : Daisy Gong : Alex Jiang Analyzing halogen by ion chromatography. Double confirm Fluorine and Iodine by ISE or UVvis, if necessary
Test Report No. SH9202593/CHEM Date: Oct. 22, 2009 Page 4 of 5 1) Name of the person who made measurement: Jeff Zhang/Even Xu/Frank Fang/Elim Lin 2) Name of the person in charge of measurement: Terry Wang/Phoebe Shen 3) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr 6+ and PBBs/PBDEs test method excluded) Sample Preparation Sample Measurement Pb/Cd/Hg PBBs/PBDEs Cr 6+ Acid digestion with microwave/ hotplate Sample solvent extraction Nonmetallic material Metallic material Filtration Concentration/ Dilution of extraction solution Adding extraction solution Positive Spot test Solution ICP-OES/AAS Residue Total digestion Filtration GC/MS Heating to 90~95 for extraction Filtration and ph adjustment Adding 1,5- diphenylcarbazide for color development UV-Vis Boiling water extraction Negative Adding 1,5- diphenylcarbazide for color development A red color indicates the presence of Cr 6+. If necessary, confirm with UV-Vis.
Test Report No. SH9202593/CHEM Date: Oct. 22, 2009 Page 5 of 5 Sample photo: SH9202593/CHEM Testing part SGS authenticate the photo on original report only *** End of Report ***