Yu.V. Grigoriev 1,2, A.V. Novikov-Borodin 1 1 Institute for Nuclear Research RAS, Moscow, Russia 2 Joint Institute for Nuclear Research, Dubna, Russia Power Installations based on Activated Nuclear Reactions of Fission and Synthesis Abstract. The general scheme of power installations based on nuclear reactions of fission and synthesis activated by external sources is analyzed. The external activation makes possible to support nuclear reactions at temperatures and pressures lower than needed for chain reactions, so simplifies considerably practical realization of power installations. The possibility of operation on undercritical masses allows making installations compact and safe at emergency situations. Installations are suitable for transmutation of radioactive nuclides, what solves the problem of utilization of nuclear waste products. It is proposed and considered schemes of power installations based on nuclear reactions of fission and fusion, activated by external sources, different from ADS systems. Variants of activation of nuclear reactions of fission (U-235, 238, Pu-239) and fusion (D, T, Li-6,7, B-10,11) are considered, designs of installations are proposed.
Problems of Nuclear Power Engineering Atomic Power Stations Safety Nuclear accidents: Chernobyl, Fukushima Nuclear terrorism Ecology Radioactive fuel mining, enrichment Hundreds of tons of radioactive wastes Economy High cost of nuclear power fuel and plants Limited amount of fuel Thermonuclear Reactors Not realized Processing and Operating Complexity Extra-high temperatures, pressures Economy High cost of power plants Fast Neutron Reactors Safety Ecology Radioactive fuel mining, enrichment ~ Radioactive wastes Economy Accelerator-Driven Systems Processing and Operating Complexity High-energy & intensity accelerator Ecology Radioactive fuel mining, enrichment Economy Low efficiency
to consume ADS Reactors Proton accelerator p + n 0 Target (heavy metal) Reactor with fissile materials proton: 0.5-1.5 GeV Heat Generator Charged Particle Activation - Low σ of nuclear interactions - Short length of neutron range (0.6 mm for Al) Neutron Activation + High σ of nuclear interactions - Acceleration?
EXTRACTOR REACTOR ACTIVATOR REACTOR EXTRACTOR CONVERTOR TO CONSUME Efficiency of NRA Installations POWER for ACTIVATION FEEDBACK P Loss ADS Reactors proton: 0.5-1.5 GeV Accelerator: ~1.5MW Reactor: 10 MW
ADS Reactors CLEAR-I (China) MYRRHA (Belgium) ADS Reactors proton: 0.5-1.5 GeV Accelerator: ~1.5MW Reactor: 10 MW Need for Activation: n 0 1 MeV!
Neutron Activation Lithium-6: 4.78/6=0.80 MeV/nucleon Boron-10: 2.79/10=0.28 MeV/nucleon Uranium-235: 180/235=0.78 MeV/nucleon Lithium-6: 180/4.78=38 neutrons Boron-10: 2.79/10=65 neutrons? Uranium-235: 180/180=1 neutron
Basic chain reactions Rival reactions: T n 6Li 9Be n Lithium-6: 9.29 MeV α 12C Boron-10: 7.23 MeV K n 1
Basic reactions Proton Lithium-6 Activation p 6Li α 3He 6Li α α p Rival reactions: +0.56 MeV +2.1 MeV
Charged Particle Activation Lithium-6,7; Berillium-9: Rival reactions: Boron-10,11; Berillium-9: Rival reactions:
Nuclear-Thermonuclear Reactor 9 7 5 1 2 3 4 6 8 1 - activation pins with uranium or plutonium, 2 - basic pins with lithium-6 or boron-10 with beryllium-9 or without it, 3 neutron moderators, 4 the coolant, 5 the neutron reflector, 6 the reactor vessel, 7 control rods, 8, 9 coolant inlet and outlet.
Autonomous Energy Sources Activating Neutron isotope sources 1 2 3 4 5 6 Spontaneous fission 251 Cf (T 1/2 =900 years), 249 Cf (T 1/2 =351 years), 250 Cf (T 1/2 =13,08 years), 252 Cf (T 1/2 =2,645 years). 1 g of 252 Cf emits 3 10 12 neutrons per second Alpha-induced (α,n) 210 Po, 226 Ra, 239 Pu, 241 Am (+ 9 Be) Usual neutron flux 10 7-10 9 neutrons per second 1 - lithium-6 or boron-10 with beryllium-9, 2 - neutron moderator, 3 - activating neutron isotope sources, 4,5 - neutron reflector and absorber, 6 - core vessel.
Conclusion The proposed power installations with activation of nuclear reactions are the nuclearthermonuclear reactors and sources, in which fusion reactions are activated by fission ones. NTR installations do not need extra-high temperatures and pressures required for reactors on chain thermonuclear reactions and use much smaller amount of radioactive fuel than existing atomic power stations. It decreases considerably the amount of radioactive wastes in NTR and, for the most part, solves the ecological problems inherent to atomic power engineering. Decreasing an amount of radioactive materials with high neutron multiplication coefficient decreases the possibility of uncontrolled chain reactions, so it increases the operational safety of NTR power stations. Nuclear-thermonuclear reactors can solve many serious problems of the nuclear and thermonuclear power engineering, but for practical realization of proposed installations a whole complex of researches, including theoretical and experimental investigations; detailed calculations; development of construction, etc., needs to be carried out. Thank You for Attention