Bison Pedestals & Accessories Material Testing Test Description Bison Results ASTM D792 ASTM D638 ASTM G155 ASTM G26 ASTM D790 ASTM D256 0 ASTM D5420 50.0 ASTM D2240 ASTM D648 231 ASTM D648 231 ASTM D635 ASTM D 1929 UL 790 TGFU R38623 UL 94 FBC TAS 110-2000 Specific Gravity Tensile Strength, 2.0 in/min Accelerated Weathering / Light Exposure Flexural Modulus, tangent Izod Impact-Notched at 23 C Gardner Impact Shore "D" Hardness Heat Temperature At 66 psi Heat Temperature At 264 psi Fire Rate of Burning Fire Ignition Temperature of Plastics Fire Self Extinguishing Spontaneous Ignition Fire Self Extinguishing Flash Ignition Testing Requirements for Components Any Class A, B or C roof system with Non-Combustible Surfacing Fire Resin Characteristics Fire Resin Characteristics Horizontal Burn 1.06 23/23 C 3800 ( 27) psi (MPa) Complies with ±10% 290000 ( 2001) psi (MPa) ( 38) ft-lb/in (J/m) ( 5.6) in-lb (J) 71 231 F (111 C) 144 F / (63 C) 144 F / (63 C) C-2 800 F 750 F Class A HB Horizontal Burn Pass Pedestals Load: Axial Compression ICC-ES AC300-2010 Uniform Load Maximum Load 1250 lbs FoS:3 Tab Shear Shear Load Shear Load Strength of Tabs 139 lbs average load. The tabs yielded and deformed but did not break or fracture Fire - Rate of Burning ASTM D635 Determine the rate of burn in a horizontal position for the material used to manufacture the Pedestal Result C-2 Material complies with FBC (HVHZ) 2612.2 prescriptive requirements Fire - Determining Ignition Temperature of Plastics ASTM D 1929 Determine the ignition property for the material used to manufacture the Pedestal Material complies with FBC (HVHZ) 2612.2 prescriptive requirements Level.it Pedestals Flash Ignition Temperature (FIT) is 750 F Spontaneous Ignition Temperature (SIT) for the pedestal products is 800 F which meets or exceed IBC 2606.4: Self- Ignition Temperature of 650 F or greater. Level.it Load: Axial Compression ICC-ES AC300-2010 Uniform Load Maximum Load 750 lbs FoS:3 Level.it Tab Shear Shear Load Shear Load Strength of Tabs 157 lbs average load. The tabs yielded and deformed but did not break or fracture Level.it & Stepstone Concrete Pavers Los Angeles Research Report System Los Angeles Building Code Research Report LARR #25754
Versadjust in combination with Bison Wood s & Ipê Wood s with FS-1 Fastening Kit w/bison Brace & Ipê Wood s & Ipê Wood s Wind Uplift Resistance TAS-108 Tests wind characteristics of an air permeable, rigid, discontinuous roof system. Florida building code references ASCE-7 which is also satisfied by this test. Tested Resistance Passed at 137 mph Maximum Air Speed Capacity of Test Seismic ICC-ES AC-156 Seismic Certification Testing Tested and Approved for Seismic Design Categories (SDC) A-F when used with Bison Seismic Installation Guidelines. Limited by maximum tested ground motion parameter SDS =2.0g at z/h=1.0. Load ICC-ES AC300-2010 Uniform Load Maximum total load: 1250 lbs. FoS:3 & Ipê Wood s Load CISCA approved tests for Access Floor systems Concentrated Load for Access Floor Systems Maximum total load: 1250 lbs. FoS:3
Bison Ipê Wood s Ipê Wood Measures relative fire resistance characteristics of roof coverings under a simulated fire originating Ipê Wood Fire - Flame Spread & Smoke Spread for Building Materials ASTM E84-08A (aka NFPA 255, ANSI/UL 723 & UBC 8-1) Standard Test Method for Surface Burning Characteristics of Building Materials 2009 Report (2): Meets Class A for NFPA Flame Spread Rating. Flame Spread Index 55, Meets Class B Smoke Developed Index 500. Ipê Wood Fire ASTM E84 SFA Part A Part A Under-Flame Test of Wildlife Urban Interface Pass. WUI Listing # 8110-2158:0100 Building Test Standards 12-7A-4 Fire Resistive Standards for Decks and other Ancillary Structures Ipê Wood Slip Resistance ASTM C1028-07 Static Coefficient of Friction Dry 0.90, Wet 0.72 Ipê Wood Load ASTM E2322-03 Standard Test Method for New Ipê Radiant Emittance ASTM C1371-04a Thermal Hemispherical Emittance. The ratio of the radiant emittance of heat of a specific object or surface to that of a standard black body. Scale 0-1 with black being 1. Concentrated Load: at 1" = 2868 lbs, Uniform Load: 8262 lbs & 606 lbs.at 0.067" 0.894 IR Emittance. High Emittance. New Ipê Solar Reflectance ASTM E1980-11, ASTM C 1549-09 Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer Average Solar Reflectance = 0.403 Average SRI = 45. Weathered Ipê Radiant Emittance ASTM C1371-04a Thermal Hemispherical Emittance. The ratio of the radiant emittance of heat of a specific object or surface to that of a standard black body. Scale 0-1 with black being 1. Weathered Ipê Solar Reflectance ASTM E1980-11, ASTM C 1549-09 Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer 0.925 IR Emittance. High Emittance. Average Solar Reflectance = 0.321 Average SRI = 36.
Bison s Load ASTM E72-10 Uniform Transverse Load. Load applied on tiles until 0.065 inches deflection and 0.100 inches deflection noted. Load ASTM E2322-03 Standard Test Method for Max Load 26,900 lbs. Concentrated Load: at 1.46" = 3860 lbs, Uniform Load: 7007lbs & 491 lbs.at 0.067" Fire - Flame Spread & Smoke Spread for Building Materials ASTM E84-13a (aka NFPA 255, ANSI/UL 723 & UBC 8-1) Measures relative fire resistance characteristics of roof coverings under a simulated fire originating Standard Test Method for Surface Burning Characteristics of Building Materials 2013 Report (2): Meets Class B for NFPA Flame Spread Rating. Flame Spread Index 30, Smoke Developed Index 450. Slip Resistance ASTM C1028-07 Static Coefficient of Friction Dry 0.85, Wet 0.79
Bison Cumaru Wood s Cumaru Wood Load ASTM E2322-03 Standard Test Method for Concentrated Load: at 1.195" = 3252 lbs, Uniform Load: 7829 lbs & 524 lbs.at 0.067" Cumaru Wood Measures relative fire resistance characteristics of roof coverings under a simulated fire originating Cumaru Wood Slip Resistance ASTM C1028-07 Static Coefficient of Friction Dry 0.85, Wet 0.80
Bison Garapa Wood s Garapa Wood Load ASTM E2322-03 Standard Test Method for Concentrated Load: at 2.13" 4649 lbs, Uniform Load: 6328 lbs & 543 lbs.at 0.067" Garapa Wood Garapa Wood Fire - Flame Spread & Smoke Spread for Building Materials ASTM E84-13a (aka NFPA 255, ANSI/UL 723 & UBC 8-1) Measures relative fire resistance characteristics of roof coverings under a simulated fire originating Standard Test Method for Surface Burning Characteristics of Building Materials 2015 Report (2): Meets Class B for NFPA Flame Spread Rating. Flame Spread Index 35, Smoke Developed Index 450. Garapa Wood Slip Resistance ASTM C1028-07 Static Coefficient of Friction Dry 0.79, Wet 0.74