Two small balls, each of mass m, with perpendicular bisector of the line joining the two balls as the axis of rotation:
|
|
- Giles Richardson
- 5 years ago
- Views:
Transcription
1 PHYSCS LOCUS 17 summation in mi ri becomes an integration. We imagine the body to be subdivided into infinitesimal elements, each of mass dm, as shown in figure Let r be the distance from such an element to the axis of rotation. Then the moment of inertia is obtained from...(7.19 c) where the integral is taken over the whole body. The procedure by which the summation of a discrete distribution is replaced by the integral for a continuous distribution is the same as that discussed for the centre of mass. Moment of inertia of the element is = dm r ². Moment of inertia of the whole body = sum of moments of inertia of all elements =. For bodies of irregular shape the integrals may be difficult to evaluate. For bodies of simple geometrical shape the integrals are relatively easy when the axis of symmetry is chosen as the axis of rotation. (a) A small ball of mass m at a distance r from the axis: (b) Two small balls, each of mass m, with perpendicular bisector of the line joining the two balls as the axis of rotation: = mi ri = + = (c) Three balls, each of mass m, at the vertices of an equilateral triangle of side length l with the line passing perpendicularly through the centroid of the triangle as the axis of rotation: = i = mi ri = + + = = m = m l 4 4 l sec
2 PHYSCS LOCUS 18 (d) An uniform rod of mass m and length l with the line passing through its centre and perpendicular to its length as the axis of rotation: = Using equation 7.19, moment of inertia of the element is dm x m dx x l Therefore, moment of inertia of the rod is l l m m x dx x dx l l l l l m l m l l l l l l m l l m l ml l 8 8 l 8 1 (e) An uniform rod of length l and mass m with the line passing through one of its ends and perpendicular to its length as the axis of rotation: =
3 PHYSCS LOCUS 19 sum of moments of inertia of all elements about the same axis l m dm x x dx l l m l l 0 0 (f) An uniform ring of mass m and radius r with the line passing through its centre and perpendicular to its plane as the axis of rotation: sum of moments of inertia of all the elements of the ring about the chosen axis dm r r dm all elements are equidistant from the axis dm m The above result could also be established in the following way: Consider the point mass m at a distance r from the axis of rotation, as shown in figure 7.4 (a). n this case the moment of inertia of the mass m about the chosen axis is Now, if we redistribute this mass and make a ring of radius r about the same axis, as shown in figure 7.4 (b), the entire mass still remains at the same distance from the axis and hence the moment of inertia is only. Now, if we stretch the ring along the length of the axis and make a hollow cylinder of radius r, as shown in figure 7.4 (c), the entire mass is still at the same distance from the chosen axis and hence the moment of inertia is still only.
4 PHYSCS LOCUS 0 Same approach could be use to find the moments of inertia of uniform rectangular plates using the results for uniform rods, as shown in figure 7.5(a) and 7.5(b). We can say that when the mass of a system is redistributed in such a way that each element shifts parallel to the axis of rotation (so that its distance from the axis remains the same), the moment of inertia of the system remains unaffected by the redistribution. (g) An uniform disc of radius r and mass m with the line passing through its centre and perpendicular to its plane as the axis of rotation: The top view of the disc is shown in figure 7.6 (b). To calculate the moment of inertia of the disc about the chosen axis, it is divided into a large number of elements. Each element being a ring with the same centre as that of the disc. Such an element is shown in figure 7.6 (c). Mass of the element is dm, radius is x and thickness is dx. The moment of inertia of the element is dm x Using for an uniform ring m r x dx x mass of the element = mass per unit area area of the element m x r dx The moment of inertia of the disc, sum of moments of inertia of all elements
5 PHYSCS LOCUS 1 r r m x dx 0 4 m r r 4 (h) A disc of uniform mass density having mass M and radius R with a concentric circular hole of radius r with the line passing through the centre of the disc and perpendicular to the plane of the disc as the axis of rotation: To find the moment of inertia of the given body about its axis of symmetry we follow the same approach as we did in the last case. Divide the body in several elemental rings, calculate the moment of inertia of each ring and then add the moments of inertia of all elemental rings to get the moment of inertia of the whole body. Such an element, having mass dm, is shown in figure 6.7(c), r being its radius and it has a thickness dr, then its moment of inertia, dm r R M R1 r dr r z R M r dr R1 Therefore, moment of inertia of the given body is R 4 4 M M R R1 r dr R R R R R 1 ( ) t could also be calculated using the method
6 PHYSCS LOCUS which is exactly what we have done in centre of mass. (i) A hollow sphere of mass M and radius R with the line coinciding with its diameter as the axis of rotation: To find the moment of inertia of the given hollow sphere, let us divide it into several elemental rings having the same axis as that of the hollow sphere, as shown in figure.8. Let the elemental ring shown in figure is at an angular position from the reference line. f dm be the mass of the ring, then, dm mass per unit area area of the ring 4 M R r Rd M Rcos 4 R Rd d M cos d The moment of inertia of the elemental ring, about the chosen axis is dm r M cos d R cos MR cos d Therefore, the moment of inertia of the given hollow sphere is sum of moments of inertia of all elemental rings MR cos d MR 4 [Solve the integral on your own.]
7 PHYSCS LOCUS We can often simplify the calculation of moments of inertia for various bodies by using general theorems relating the moment of inertia about one axis of the body to that about another axis. Steiner s theorem or parallel axis theorem, relates the moment of inertia about an axis through the centre of mass of a body to that about a second parallel axis. Let cm be the moment of inertia about an axis through the centre of mass of a body and be that about a parallel axis a distance h away. The parallel axis theorem states that mh cm...(7.0) where m is the mass of the body, Consider the situation shown in figure 7.9 (a). A body of mass M is shown with its centre of mass coinciding with the origin of the reference frame. The moment of inertia of an element of mass dm at the point (x, y, z), as shown in figure 7.9(b), about the axis coinciding with the z-axis and hence through the centre of mass of the body is cm square of perpendicular distance from the z-axis dm dm ( x y ) Now, consider another axis parallel to the z-axis and meeting the x-y plane at the point (a, b) as shown in figure 7.9 (b). The moment of inertia of the same element about this axis is dm ( x a ) ( y b) Using change of refrence from method dm( x y ) dm(a b ) a dm x b dm y Therefore, the moment of inertia of the whole body about this axis is Top view of x-y plane. dm( x cm y ) dm(a b ) a dm x b dm d dm( x a dm x b dm y cm cm m d 0 0 dm y dm y cm ; dm m ycm y) and a b m; 0. dm x cm d m xcm 0;
8 PHYSCS LOCUS 4 Some applications of parallel axis theorem are shown in figure 7.0. A thin uniform rod: mh cm ml l m 1 ml ml 1 4 ml A uniform ring: mh cm a uniform disc: mh cm Applications of parallel axis theorem
9 PHYSCS LOCUS 5 The plane figure theorem or perpendicular axis theorem relates the moments of inertia about two perpendicular axes in a plane figure to the moment of inertia about a third axis perpendicular to the figure. f x, y, z, are perpendicular axes for a figure which lies in the x-y plane, the moment of inertia about the z-axis equals the sum of the moments of inertia about the x and y axes. Therefore, we have,...(7.1) Before applying this theorem you must make sure that the body is in x-y plane only and the third axis (z-axis in this case) must pass perpendicularly through the intersection points of x and y axes. The moment of inertia of the chosen element in figure 7.1, about the x-axis is x dm x The moment of inertia of the element about the y-axis is y dm y The moment of inertia of the element about the z-axis is z dm r dm ( x y ) dm x dm y x Therefore, the moment of inertia of the whole planar body about the z-axis is y z z x y x y
10 PHYSCS LOCUS 6 figure 7.: Some applications of perpendicular axis theorem are shown in 0 0 / Finding moment of inertia of a ring about its diameter Finding moment of inertia of a disc about its diameter. 0 1 ma mb 1 1 a m b 1 Finding moment of inertia of a rectangular plate about an axis passing through its axis and perpendicular to its plane. For a square plate, put a = b.
Handout 6: Rotational motion and moment of inertia. Angular velocity and angular acceleration
1 Handout 6: Rotational motion and moment of inertia Angular velocity and angular acceleration In Figure 1, a particle b is rotating about an axis along a circular path with radius r. The radius sweeps
More informationMoments of Inertia (7 pages; 23/3/18)
Moments of Inertia (7 pages; 3/3/8) () Suppose that an object rotates about a fixed axis AB with angular velocity θ. Considering the object to be made up of particles, suppose that particle i (with mass
More informationb) 2/3 MR 2 c) 3/4MR 2 d) 2/5MR 2
Rotational Motion 1) The diameter of a flywheel increases by 1%. What will be percentage increase in moment of inertia about axis of symmetry a) 2% b) 4% c) 1% d) 0.5% 2) Two rings of the same radius and
More informationPhysics. TOPIC : Rotational motion. 1. A shell (at rest) explodes in to smalll fragment. The C.M. of mass of fragment will move with:
TOPIC : Rotational motion Date : Marks : 120 mks Time : ½ hr 1. A shell (at rest) explodes in to smalll fragment. The C.M. of mass of fragment will move with: a) zero velocity b) constantt velocity c)
More informationSub:Strength of Material (22306)
Sub:Strength of Material (22306) UNIT 1. Moment of Inertia 1.1 Concept of Moment of Inertia (Ml). Effect of MI in case of beam and column. 1.2 MI about axes passing through centroid. Parallel and Perpendicular
More information15.3. Moment of inertia. Introduction. Prerequisites. Learning Outcomes
Moment of inertia 15.3 Introduction In this section we show how integration is used to calculate moments of inertia. These are essential for an understanding of the dynamics of rotating bodies such as
More informationPHYS 211 Lecture 21 - Moments of inertia 21-1
PHYS 211 Lecture 21 - Moments of inertia 21-1 Lecture 21 - Moments of inertia Text: similar to Fowles and Cassiday, Chap. 8 As discussed previously, the moment of inertia I f a single mass m executing
More informationNotes on Torque. We ve seen that if we define torque as rfsinθ, and the N 2. i i
Notes on Torque We ve seen that if we define torque as rfsinθ, and the moment of inertia as N, we end up with an equation mr i= 1 that looks just like Newton s Second Law There is a crucial difference,
More informationMOI (SEM. II) EXAMINATION.
Problems Based On Centroid And MOI (SEM. II) EXAMINATION. 2006-07 1- Find the centroid of a uniform wire bent in form of a quadrant of the arc of a circle of radius R. 2- State the parallel axis theorem.
More informationSTATICS. Distributed Forces: Moments of Inertia VECTOR MECHANICS FOR ENGINEERS: Eighth Edition CHAPTER. Ferdinand P. Beer E. Russell Johnston, Jr.
007 The McGraw-Hill Companies, nc. All rights reserved. Eighth E CHAPTER 9 VECTOR MECHANCS FOR ENGNEERS: STATCS Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University
More informationMoment of Inertia and Centroid
Chapter- Moment of nertia and Centroid Page- 1. Moment of nertia and Centroid Theory at a Glance (for ES, GATE, PSU).1 Centre of gravity: The centre of gravity of a body defined as the point through which
More information1.1. Rotational Kinematics Description Of Motion Of A Rotating Body
PHY 19- PHYSICS III 1. Moment Of Inertia 1.1. Rotational Kinematics Description Of Motion Of A Rotating Body 1.1.1. Linear Kinematics Consider the case of linear kinematics; it concerns the description
More informationAPM1612. Tutorial letter 203/1/2018. Mechanics 2. Semester 1. Department of Mathematical Sciences APM1612/203/1/2018
APM6/03//08 Tutorial letter 03//08 Mechanics APM6 Semester Department of Mathematical Sciences IMPORTANT INFORMATION: This tutorial letter contains solutions to assignment 3, Sem. BARCODE Define tomorrow.
More informationTwo Dimensional Rotational Kinematics Challenge Problem Solutions
Two Dimensional Rotational Kinematics Challenge Problem Solutions Problem 1: Moment of Inertia: Uniform Disc A thin uniform disc of mass M and radius R is mounted on an axis passing through the center
More informationTOPIC D: ROTATION EXAMPLES SPRING 2018
TOPIC D: ROTATION EXAMPLES SPRING 018 Q1. A car accelerates uniformly from rest to 80 km hr 1 in 6 s. The wheels have a radius of 30 cm. What is the angular acceleration of the wheels? Q. The University
More informationSecond Moments or Moments of Inertia
Second Moments or Moments of Inertia The second moment of inertia of an element of area such as da in Figure 1 with respect to any axis is defined as the product of the area of the element and the square
More informationMoment of inertia of different bodies
Moment of inertia of different bodies Aim: 1) Study moment of inertia of different bodies Objectives of the experiment 1. Measuring the period of oscillation of a thin transverse rod with weights on a
More informationPLANAR KINETICS OF A RIGID BODY FORCE AND ACCELERATION
PLANAR KINETICS OF A RIGID BODY FORCE AND ACCELERATION I. Moment of Inertia: Since a body has a definite size and shape, an applied nonconcurrent force system may cause the body to both translate and rotate.
More informationChapter Rotational Motion
26 Chapter Rotational Motion 1. Initial angular velocity of a circular disc of mass M is ω 1. Then two small spheres of mass m are attached gently to diametrically opposite points on the edge of the disc.
More informationCP1 REVISION LECTURE 3 INTRODUCTION TO CLASSICAL MECHANICS. Prof. N. Harnew University of Oxford TT 2017
CP1 REVISION LECTURE 3 INTRODUCTION TO CLASSICAL MECHANICS Prof. N. Harnew University of Oxford TT 2017 1 OUTLINE : CP1 REVISION LECTURE 3 : INTRODUCTION TO CLASSICAL MECHANICS 1. Angular velocity and
More informationENGI Multiple Integration Page 8-01
ENGI 345 8. Multiple Integration Page 8-01 8. Multiple Integration This chapter provides only a very brief introduction to the major topic of multiple integration. Uses of multiple integration include
More informationMotion Of An Extended Object. Physics 201, Lecture 17. Translational Motion And Rotational Motion. Motion of Rigid Object: Translation + Rotation
Physics 01, Lecture 17 Today s Topics q Rotation of Rigid Object About A Fixed Axis (Chap. 10.1-10.4) n Motion of Extend Object n Rotational Kinematics: n Angular Velocity n Angular Acceleration q Kinetic
More informationENGI 4430 Multiple Integration Cartesian Double Integrals Page 3-01
ENGI 4430 Multiple Integration Cartesian Double Integrals Page 3-01 3. Multiple Integration This chapter provides only a very brief introduction to the major topic of multiple integration. Uses of multiple
More information3. ROTATIONAL MOTION
3. ROTATONAL OTON. A circular disc of mass 0 kg and radius 0. m is set into rotation about an axis passing through its centre and perpendicular to its plane by applying torque 0 Nm. Calculate the angular
More information14. Rotational Kinematics and Moment of Inertia
14. Rotational Kinematics and Moment of nertia A) Overview n this unit we will introduce rotational motion. n particular, we will introduce the angular kinematic variables that are used to describe the
More informationClass XI Chapter 7- System of Particles and Rotational Motion Physics
Page 178 Question 7.1: Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring, and (iv) cube, each of uniform mass density. Does the centre of mass of a body necessarily lie
More informationRotation Moment of Inertia and Applications
Rotation Moment of Inertia and Applications Lana Sheridan De Anza College Nov 20, 2016 Last time net torque Newton s second law for rotation moments of inertia calculating moments of inertia Overview calculating
More informationSYSTEM OF PARTICLES AND ROTATIONAL MOTION
Chapter Seven SYSTEM OF PARTICLES AND ROTATIONAL MOTION MCQ I 7.1 For which of the following does the centre of mass lie outside the body? (a) A pencil (b) A shotput (c) A dice (d) A bangle 7. Which of
More informationSOLUTION di x = y2 dm. rdv. m = a 2 bdx. = 2 3 rpab2. I x = 1 2 rp L0. b 4 a1 - x2 a 2 b. = 4 15 rpab4. Thus, I x = 2 5 mb2. Ans.
17 4. Determine the moment of inertia of the semiellipsoid with respect to the x axis and express the result in terms of the mass m of the semiellipsoid. The material has a constant density r. y x y a
More informationEF 151 Exam #4 - Spring, 2016 Page 1 Copy 205
EF 151 Exam #4 - Spring, 016 Page 1 Copy 05 Name: Section: Instructions: Sit in assigned seat; failure to sit in assigned seat results in a 0 for the exam. Put name and section on your exam. Put seating
More informationSt. Vincent College PH : General Physics II. Exam 5 4/8/2016
St. Vincent College PH 112-01: General Physics II Exam 5 4/8/2016 The exam consists of 4 questions. The questions may not be worth the same number of points, so read the entire exam before beginning work.
More informationUSHA RAMA COLLEGE OF ENGINEERING & TECHNOLOGY
Set No - 1 I B. Tech II Semester Supplementary Examinations Feb. - 2015 ENGINEERING MECHANICS (Common to ECE, EEE, EIE, Bio-Tech, E Com.E, Agri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists
More informationRotational & Rigid-Body Mechanics. Lectures 3+4
Rotational & Rigid-Body Mechanics Lectures 3+4 Rotational Motion So far: point objects moving through a trajectory. Next: moving actual dimensional objects and rotating them. 2 Circular Motion - Definitions
More informationQ9.1. A. t = 1 s B. t = 2 s C. t = 3 s D. t = 4 s E. t = 5 s Pearson Education, Inc.
Q9.1 The graph shows the angular velocity and angular acceleration versus time for a rotating body. At which of the following times is the rotation speeding up at the greatest rate? A. t = 1 s B. t = 2
More information1301W.600 Lecture 16. November 6, 2017
1301W.600 Lecture 16 November 6, 2017 You are Cordially Invited to the Physics Open House Friday, November 17 th, 2017 4:30-8:00 PM Tate Hall, Room B20 Time to apply for a major? Consider Physics!! Program
More information(a) zero. B 2 l 2. (c) (b)
1. Two identical co-axial circular loops carry equal currents circulating in the same direction: (a) The current in each coil decrease as the coils approach each other. (b) The current in each coil increase
More informationRotation. EMU Physics Department. Ali ÖVGÜN.
Rotation Ali ÖVGÜN EMU Physics Department www.aovgun.com Rotational Motion Angular Position and Radians Angular Velocity Angular Acceleration Rigid Object under Constant Angular Acceleration Angular and
More information2015 ENGINEERING MECHANICS
Set No - 1 I B. Tech I Semester Supplementary Examinations Aug. 2015 ENGINEERING MECHANICS (Common to CE, ME, CSE, PCE, IT, Chem E, Aero E, AME, Min E, PE, Metal E) Time: 3 hours Max. Marks: 70 Question
More informationENGR-1100 Introduction to Engineering Analysis. Lecture 17
ENGR-1100 Introduction to Engineering Analysis Lecture 17 CENTROID OF COMPOSITE AREAS Today s Objective : Students will: a) Understand the concept of centroid. b) Be able to determine the location of the
More informationMoment of inertia. Contents. 1 Introduction and simple cases. January 15, Introduction. 1.2 Examples
Moment of inertia January 15, 016 A systematic account is given of the concept and the properties of the moment of inertia. Contents 1 Introduction and simple cases 1 1.1 Introduction.............. 1 1.
More informationPHY 001 (Physics I) Lecture 7
PHY 001 (Physics I) Instructor: Dr. Mohamed Fouad Salem mohamed.salem@gmail.com Textbook University Physics, 12 th edition, Young and Freedman Course Material Website http://meryesk.wordpress.com/phy001/
More informationLecture 10 - Moment of Inertia
Lecture 10 - oment of Inertia A Puzzle... Question For any object, there are typically many ways to calculate the moment of inertia I = r 2 dm, usually by doing the integration by considering different
More information14.1. Multiple Integration. Iterated Integrals and Area in the Plane. Iterated Integrals. Iterated Integrals. MAC2313 Calculus III - Chapter 14
14 Multiple Integration 14.1 Iterated Integrals and Area in the Plane Objectives Evaluate an iterated integral. Use an iterated integral to find the area of a plane region. Copyright Cengage Learning.
More informationMOTION OF SYSTEM OF PARTICLES AND RIGID BODY CONCEPTS..Centre of mass of a body is a point where the entire mass of the body can be supposed to be concentrated For a system of n-particles, the centre of
More informationUniform Circular Motion:-Circular motion is said to the uniform if the speed of the particle (along the circular path) remains constant.
Circular Motion:- Uniform Circular Motion:-Circular motion is said to the uniform if the speed of the particle (along the circular path) remains constant. Angular Displacement:- Scalar form:-?s = r?θ Vector
More informationRotational Mechanics Part III Dynamics. Pre AP Physics
Rotational Mechanics Part III Dynamics Pre AP Physics We have so far discussed rotational kinematics the description of rotational motion in terms of angle, angular velocity and angular acceleration and
More information8 Rotational motion of solid objects
8 Rotational motion of solid objects Kinematics of rotations PHY166 Fall 005 In this Lecture we call solid objects such extended objects that are rigid (nondeformable) and thus retain their shape. In contrast
More informationTHE DOUBLE INTEGRAL AS THE LIMIT OF RIEMANN SUMS; POLAR COORDINATES
HE DOUBLE INEGRAL AS HE LIMI OF RIEMANN SUMS; POLAR COORDINAES HE DOUBLE INEGRAL AS HE LIMI OF RIEMANN SUMS; POLAR COORDINAES he Double Integral as the Limit of Riemann Sums In the one-variable case we
More informationMoment of Inertia & Newton s Laws for Translation & Rotation
Moment of Inertia & Newton s Laws for Translation & Rotation In this training set, you will apply Newton s 2 nd Law for rotational motion: Στ = Σr i F i = Iα I is the moment of inertia of an object: I
More informationPLANAR KINETIC EQUATIONS OF MOTION (Section 17.2)
PLANAR KINETIC EQUATIONS OF MOTION (Section 17.2) We will limit our study of planar kinetics to rigid bodies that are symmetric with respect to a fixed reference plane. As discussed in Chapter 16, when
More informationChapter 15 Appendix Moment of Inertia of a Spherical Shell
Chapter 1 Appendix Moment of nertia of a Spherical Shell t is common to regard the rotation of a rigid object with spherical symmetry; we live on one such object (not entirely uniform and not entirely
More informationHong Kong Institute of Vocational Education (Tsing Yi) Higher Diploma in Civil Engineering Structural Mechanics. Chapter 2 SECTION PROPERTIES
Section Properties Centroid The centroid of an area is the point about which the area could be balanced if it was supported from that point. The word is derived from the word center, and it can be though
More informationTime : 3 hours 02 - Mathematics - July 2006 Marks : 100 Pg - 1 Instructions : S E CT I O N - A
Time : 3 hours 0 Mathematics July 006 Marks : 00 Pg Instructions :. Answer all questions.. Write your answers according to the instructions given below with the questions. 3. Begin each section on a new
More informationChapter 10. Rotation of a Rigid Object about a Fixed Axis
Chapter 10 Rotation of a Rigid Object about a Fixed Axis Angular Position Axis of rotation is the center of the disc Choose a fixed reference line. Point P is at a fixed distance r from the origin. A small
More informationBending Stress. Sign convention. Centroid of an area
Bending Stress Sign convention The positive shear force and bending moments are as shown in the figure. Centroid of an area Figure 40: Sign convention followed. If the area can be divided into n parts
More informationSecond Year Electromagnetism Summer 2018 Caroline Terquem. Vacation work: Problem set 0. Revisions
Second Year Electromagnetism Summer 2018 Caroline Terquem Vacation work: Problem set 0 Revisions At the start of the second year, you will receive the second part of the Electromagnetism course. This vacation
More informationAREAS, RADIUS OF GYRATION
Chapter 10 MOMENTS of INERTIA for AREAS, RADIUS OF GYRATION Today s Objectives: Students will be able to: a) Define the moments of inertia (MoI) for an area. b) Determine the MoI for an area by integration.
More informationCalculating Moments of Inertia
Calculating Moments of Inertia Lana Sheridan 1 Definitions The moment of inertia, I of an object for a particular axis is the constant that links the applied torque τ about that axis to the angular acceleration
More informationVALLIAMMAI ENGINEERING COLLEGE SRM NAGAR, KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR, KATTANKULATHUR 603203 DEPARTMENT OF MECHANICAL ENGINEERING BRANCH: MECHANICAL YEAR / SEMESTER: I / II UNIT 1 PART- A 1. State Newton's three laws of motion? 2.
More informationLecture 6: Distributed Forces Part 2 Second Moment of Area
Lecture 6: Distributed Forces Part Second Moment of rea The second moment of area is also sometimes called the. This quantit takes the form of The phsical representation of the above integral can be described
More informationAP Physics C: Rotation II. (Torque and Rotational Dynamics, Rolling Motion) Problems
AP Physics C: Rotation II (Torque and Rotational Dynamics, Rolling Motion) Problems 1980M3. A billiard ball has mass M, radius R, and moment of inertia about the center of mass I c = 2 MR²/5 The ball is
More informationME 201 Engineering Mechanics: Statics
ME 0 Engineering Mechanics: Statics Unit 9. Moments of nertia Definition of Moments of nertia for Areas Parallel-Axis Theorem for an Area Radius of Gyration of an Area Moments of nertia for Composite Areas
More informationClassical Mechanics Lecture 15
Classical Mechanics Lecture 5 Today s Concepts: a) Parallel Axis Theorem b) Torque & Angular Acceleration Mechanics Lecture 5, Slide Unit 4 Main Points Mechanics Lecture 4, Slide Unit 4 Main Points Mechanics
More informationRolling, Torque & Angular Momentum
PHYS 101 Previous Exam Problems CHAPTER 11 Rolling, Torque & Angular Momentum Rolling motion Torque Angular momentum Conservation of angular momentum 1. A uniform hoop (ring) is rolling smoothly from the
More informationRotation. PHYS 101 Previous Exam Problems CHAPTER
PHYS 101 Previous Exam Problems CHAPTER 10 Rotation Rotational kinematics Rotational inertia (moment of inertia) Kinetic energy Torque Newton s 2 nd law Work, power & energy conservation 1. Assume that
More informationQuantitative Skills and Advanced Calculus Topics in AP Physics C: Mechanics
in AP Physics C: This chapter focuses on some of the quantitative skills that are important in your AP Physics C: course. These are not all of the skills that you will learn, practice, and apply during
More informationCentroid & Moment of Inertia
UNIT Learning Objectives Centroid & Moment of Inertia After studying this unit, the student will be able to Know what is centre of gravity and centroid Calculate centroid of geometric sections Centre of
More informationRotational Kinematics and Dynamics. UCVTS AIT Physics
Rotational Kinematics and Dynamics UCVTS AIT Physics Angular Position Axis of rotation is the center of the disc Choose a fixed reference line Point P is at a fixed distance r from the origin Angular Position,
More informationMOMENT OF INERTIA. Applications. Parallel-Axis Theorem
MOMENT OF INERTIA Today s Objectives: Students will be able to: 1. Determine the mass moment of inertia of a rigid body or a system of rigid bodies. In-Class Activities: Applications Mass Moment of Inertia
More informationis any such piece, suppose we choose a in this piece and use σ ( xk, yk, zk) . If B
Multivariable Calculus Lecture # Notes In this lecture we look at integration over regions in space, ie triple integrals, using Cartesian coordinates, cylindrical coordinates, and spherical coordinates
More informationCoimisiún na Scrúduithe Stáit State Examinations Commission
00. M3 Coimisiún na Scrúduithe Stáit State Examinations Commission LEAVING CERTIFICATE EXAMINATION, 00 APPLIED MATHEMATICS HIGHER LEVEL FRIDAY, 5 JUNE MORNING, 9.30 to.00 Six questions to be answered.
More informationThe Sphere OPTIONAL - I Vectors and three dimensional Geometry THE SPHERE
36 THE SPHERE You must have played or seen students playing football, basketball or table tennis. Football, basketball, table tennis ball are all examples of geometrical figures which we call "spheres"
More informationPhysicsAndMathsTutor.com
1. A uniform circular disc has mass 4m, centre O and radius 4a. The line POQ is a diameter of the disc. A circular hole of radius a is made in the disc with the centre of the hole at the point R on PQ
More informationME 141. Lecture 8: Moment of Inertia
ME 4 Engineering Mechanics Lecture 8: Moment of nertia Ahmad Shahedi Shakil Lecturer, Dept. of Mechanical Engg, BUET E-mail: sshakil@me.buet.ac.bd, shakil679@gmail.com Website: teacher.buet.ac.bd/sshakil
More informationUNIT 6. BELL WORK: Draw 3 different sized circles, 1 must be at LEAST 15cm across! Cut out each circle. The Circle
UNIT 6 BELL WORK: Draw 3 different sized circles, 1 must be at LEAST 15cm across! Cut out each circle The Circle 1 Questions How are perimeter and area related? How are the areas of polygons and circles
More informationh p://edugen.wileyplus.com/edugen/courses/crs1404/pc/b03/c2hlch...
n this appendix we discuss... 1 of 4 16-Sep-12 19:35 APPENDIX C In this appendix we discuss how to calculate the moment of inertia of an area. 1 The moment of inertia of an area was first introduced in
More informationGame Physics. Game and Media Technology Master Program - Utrecht University. Dr. Nicolas Pronost
Game and Media Technology Master Program - Utrecht University Dr. Nicolas Pronost Rigid body physics Particle system Most simple instance of a physics system Each object (body) is a particle Each particle
More information[8] Bending and Shear Loading of Beams
[8] Bending and Shear Loading of Beams Page 1 of 28 [8] Bending and Shear Loading of Beams [8.1] Bending of Beams (will not be covered in class) [8.2] Bending Strain and Stress [8.3] Shear in Straight
More informationGet Discount Coupons for your Coaching institute and FREE Study Material at Force System
Get Discount Coupons for your Coaching institute and FEE Study Material at www.pickmycoaching.com Mechanics Force System When a member of forces simultaneously acting on the body, it is known as force
More informationChapter 5. Distributed Forces: Centroids and Centers of Gravity
Chapter 5 Distributed Forces: Centroids and Centers of Gravity Application There are many examples in engineering analysis of distributed loads. It is convenient in some cases to represent such loads as
More informationChapter 9 Moment of Inertia
Chapter 9 Moment of Inertia Dr. Khairul Salleh Basaruddin Applied Mechanics Division School of Mechatronic Engineering Universiti Malaysia Perlis (UniMAP) khsalleh@unimap.edu.my PARALLEL-AXIS THEOREM,
More informationROTATORY MOTION. ii) iii) iv) W = v) Power = vi) Torque ( vii) Angular momentum (L) = Iω similar to P = mv 1 Iω. similar to F = ma
OTATOY MOTION Synopsis : CICULA MOTION :. In translatory motion, every particle travels the same distance along parallel paths, which may be straight or curved. Every particle of the body has the same
More informationKINGS COLLEGE OF ENGINEERING ENGINEERING MECHANICS QUESTION BANK UNIT I - PART-A
KINGS COLLEGE OF ENGINEERING ENGINEERING MECHANICS QUESTION BANK Sub. Code: CE1151 Sub. Name: Engg. Mechanics UNIT I - PART-A Sem / Year II / I 1.Distinguish the following system of forces with a suitable
More informationME 101: Engineering Mechanics
ME 0: Engineering Mechanics Rajib Kumar Bhattacharja Department of Civil Engineering ndian nstitute of Technolog Guwahati M Block : Room No 005 : Tel: 8 www.iitg.ernet.in/rkbc Area Moments of nertia Parallel
More informationProperties of plane surfaces I: First moment and centroid of area
Properties of plane surfaces I: First moment and centroid of area Having deal with trusses and frictional forces, we now change gears and go on to discuss some properties of surfaces mathematically. Of
More informationDEFINITION OF MOMENTS OF INERTIA FOR AREAS, RADIUS OF GYRATION OF AN AREA
DEFINITION OF MOMENTS OF INERTIA FOR AREAS, RADIUS OF GYRATION OF AN AREA Today s Objectives: Students will be able to: a) Define the moments of inertia (MoI) for an area. b) Determine the moment of inertia
More informationChapter 19 Angular Momentum
Chapter 19 Angular Momentum Chapter 19 Angular Momentum... 2 19.1 Introduction... 2 19.2 Angular Momentum about a Point for a Particle... 3 19.2.1 Angular Momentum for a Point Particle... 3 19.2.2 Right-Hand-Rule
More informationPhys 106 Practice Problems Common Quiz 1 Spring 2003
Phys 106 Practice Problems Common Quiz 1 Spring 2003 1. For a wheel spinning with constant angular acceleration on an axis through its center, the ratio of the speed of a point on the rim to the speed
More informationChapter 9 Notes. x cm =
Chapter 9 Notes Chapter 8 begins the discussion of rigid bodies, a system of particles with fixed relative positions. Previously we have dealt with translation of a particle: if a rigid body does not rotate
More informationENGINEERING MECHANICS
Set No - 1 I B. Tech II Semester Regular/Supply Examinations July/Aug. - 2015 ENGINEERING MECHANICS (Common to ECE, EEE, EIE, Bio-Tech, E Com.E, Agri. E) Time: 3 hours Max. Marks: 70 Question Paper Consists
More informationTwo-Dimensional Rotational Kinematics
Two-Dimensional Rotational Kinematics Rigid Bodies A rigid body is an extended object in which the distance between any two points in the object is constant in time. Springs or human bodies are non-rigid
More informationLOCUS. Definition: The set of all points (and only those points) which satisfy the given geometrical condition(s) (or properties) is called a locus.
LOCUS Definition: The set of all points (and only those points) which satisfy the given geometrical condition(s) (or properties) is called a locus. Eg. The set of points in a plane which are at a constant
More informationRotation. I. Kinematics - Angular analogs
Rotation I. Kinematics - Angular analogs II. III. IV. Dynamics - Torque and Rotational Inertia Work and Energy Angular Momentum - Bodies and particles V. Elliptical Orbits The student will be able to:
More informationMechanics Topic D (Rotation) - 1 David Apsley
TOPIC D: ROTATION SPRING 2019 1. Angular kinematics 1.1 Angular velocity and angular acceleration 1.2 Constant-angular-acceleration formulae 1.3 Displacement, velocity and acceleration in circular motion
More informationDistributed Forces: Moments of Inertia
Distributed Forces: Moments of nertia Contents ntroduction Moments of nertia of an Area Moments of nertia of an Area b ntegration Polar Moments of nertia Radius of Gration of an Area Sample Problems Parallel
More informationExam One Solutions. Problem 1 (25 points): answers without work shown will not be given any credit.
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics 8.02 Spring 2014 Exam One Solutions Problem 1 (25 points): answers without work shown will not be given any credit. Four point-like objects of
More informationNARAYANA IIT/PMT ACADEMY
NARAYANA IIT ACADEMY ANSWER KEY XI STUD (LJ) IITJEE MAINS MODEL Exam Date :4-1-018 physics Chemistry Mathematics 1. (D) 31. (D) 61. (B). (B) 3. (A) 6. (C) 3. (B) 33. (A) 63. (A) 4. (C) 34. (C) 64. (A)
More information1. What would be the value of F1 to balance the system if F2=20N? 20cm T =? 20kg
1. What would be the value of F1 to balance the system if F2=20N? F2 5cm 20cm F1 (a) 3 N (b) 5 N (c) 4N (d) None of the above 2. The stress in a wire of diameter 2 mm, if a load of 100 gram is applied
More informationQuestion 7.1: Answer. Geometric centre; No
Question 7.1: Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring,, and (iv) cube, each of uniform mass density. Does the centre of mass of a body necessarily lie inside
More information2. a) Explain the equilibrium of i) Concurrent force system, and ii) General force system.
Code No: R21031 R10 SET - 1 II B. Tech I Semester Supplementary Examinations Dec 2013 ENGINEERING MECHANICS (Com to ME, AE, AME, MM) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions
More information