Data Sheet. ASMT-QYBB-Nxxxx Super 0.5W Warm White Power PLCC-4 Surface Mount LED Indicator. Description. Features. Applications
|
|
- Job Wood
- 5 years ago
- Views:
Transcription
1 SMT-QYBB-Nxxxx Super 0.5W Warm White Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5W Warm White Power PL-4 SMT LED is Warm white mid-power PL-4 SMT LEDs using InGaN chip technology. The package can be driven at high current due to its superior package design. The product is able to dissipate the heat more efficiently compared to the Power PL-4 SMT LEDs. These LEDs produce higher light output with better flux performance compared to the Power PL-4 SMT LED. The Super 0.5W Warm White Power PL-4 SMT LEDs are designed for higher reliability, better performance, and operate under a wide range of environmental conditions. The performance characteristics of these new mid-power LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals. To facilitate easy pick and place assembly, the LEDs are packed in EI-compliant tape and reel. Every reel is shipped in single intensity and color bin, to provide close uniformity. Features Industry Standard PL 4 platform (3.2x2.8x1.9mm) High reliability package with enhanced silicone resin encapsulation High brightness with optimum flux performance using InGaN chip technologies vailable in Warm White vailable in 8mm carrier tape & 7 inch reel Low Thermal Resistance 40 /W Wide viewing angle at 120 degree JEDE MSL 2 pplications 1. Interior automotive a. Instrument panel backlighting b. entral console backlighting c. Navigation and audio system backlighting d. Dome/Map lighting e. Push button backlighting f. Puddle lamp g. Glove compartment illumination 2. Exterior automotive a. Number plate illumination 3. Electronic signs and signals a. Decorative lighting 4. Office automation, home appliances, industrial equipment a. Panel/button backlighting b. Display backl-ighting UTION: SMT-QYBB-Nxxxx LEDs are lass 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to vago pplication Note N-1142 for additional details.
2 Package Drawing 2.8 ± ± ± ± ± ± ± ± 0.2 Ø (TYP.) 0.56 (TYP.) 0.97 THODE MRKING 0.7 Note: 1. ll Dimensions in millimeters. 2. Lead Polarity as shown in Figure Terminal Finish: g plating 4. Encapsulation material: Silicone resin Figure 1. Package Drawing Table 1. Device Selection Guide (T J = 25 ) olor Part Number Luminous Flux, Φ V [1] (lm) Min. Flux (lm) Typ. Flux (lm) Max. Flux (lm) Test urrent (m) Warm White SMT-QYBB-NFG0E InGaN Notes: 1. Φ V is the total luminous flux output as measured with an integrating sphere at mono pulse conditions. 2. Tolerance = ±12% Dice Technology Part Numbering System S M T - Q X 1 B B N X 2 X 3 X 4 X 5 Packaging Option olour Bin Selection Max. Flux Bin Selection Min. Flux Bin Selection olor Y - Warm White 2
3 Table 2. bsolute Maximum Ratings (T = 25 ) Parameters D Forward urrent [1] Peak Forward urrent [2] Power Dissipation Reverse Voltage SMT-QYBB-Nxxxx 150 m 300 m 615 mw Junction Temperature 125 Operating Temperature Storage Temperature Notes: 1. Derate Linearly as shown in Figure Duty Factor = 10%, Frequency = 1kHz Not Recommended -40 to to +110 Table 3. Optical haracteristics (T J = 25 ) olor Part Number Dice Technology Typical hromaticity oordinates Viewing ngle 2θ ½ [1] (Degrees) Luminous Efficiency η e (lm/w) x y Typ. Typ. Typ. Warm White SMT-QYBB-Nxxxx InGaN Notes: 1. θ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Total Flux / Luminous Intensity Φ V (lm) / I V (cd) Table 4. Electrical haracteristics (T J = 25 ) Forward Voltage V F I F = 150 m Part Number Typ. Max. Thermal Resistance Rθ J-P ( /W) SMT-QYBB-NxxxE
4 RELTIVE INTENSITY WVELENGTH - nm Figure 2. Relative Intensity Vs. Wavelength FORWRD URRENT - m FORWRD VOLTGE - V Figure 3. Forward urrent Vs. Forward Voltage. RELTIVE LUMINOUS FLUX (NORMLIZED T 150 m) D FORWRD URRENT - m Figure 4. Relative Flux vs. Forward urrent RELTIVE LUMINOUS FLUX (NORMLIZED T 25 ) T J - JUNTION TEMPERTURE - Figure 5. Relative Flux Vs. Temperature URRENT - m RθJ = 90 /W RθJ = 110 /W TEMPERTURE ( ) Figure 6a. Maximum Forward urrent Vs. mbient Temperature. Derated Based on T JMX = 125, Rθ J- =110 /W & 90 /W. URRENT - m Rθ JP = 40 /W TEMPERTURE ( ) Figure 6b. Maximum Forward urrent Vs. Solder Point Temperature. Derated Based on T JMX = 125, Rθ J-P =40 /W. 4
5 URRENT D = t t p p T T I F t p - Time - (s) Figure 7a. Maximum Pulse urrent Vs. mbient Temperature. Derated Based on T = 25, Rθ J- =110 /W. D = URRENT D = t p T D = t p - Time - (s) Figure 7b. Maximum Pulse urrent Vs. mbient Temperature. Derated Based on T = 85, Rθ J-P =110 /W. t p T I F FORWRD VOLTGE SHIFT - V T J - JUNTION TEMPERTURE - Figure 8. Forward Voltage Shift Vs. Temperature. NORMLIZED INTENSITY NGULR DISPLEMENT - DEGREES Figure 9. Radiation Pattern 5
6 10 to 30 SE. D TEMPERTURE /SE. MX. 6 /SE. MX. 3 /SE. MX SE. 100 SE. MX. TIME Note: Diameter "D" should be smaller than 2.2 Figure 10. Recommended Pick and Place Nozzle Size Note: For detail information on reflow soldering of vago surface mount LEDs, do refer to vago pplication Note N 1060 Surface Mounting SMT LED Indicator omponents. Figure 11. Recommended Pb-free Reflow Soldering Profile X x THODE MRKING SOLDER MSK NODE THODE THODE MRKING MINIMUM 55 mm 2 OF THODE PD FOR IMPROVED HET DISSIPTION Figure 12. Recommended Soldering Pad Pattern 6
7 TRILER OMPONENT LEDER 200 mm MIN. FOR Ø180 REEL. 200 mm MIN. FOR Ø330 REEL. 480 mm MIN. FOR Ø180 REEL. 960 mm MIN. FOR Ø330 REEL. USER FEED DIRETION Figure 13. Tape Leader and Trailer Dimensions Ø ± ± ± ± ± ± ± ± 0.1 Ø ± LL DIMENSIONS IN mm. Figure 14. Tape Dimensions USER FEED DIRETION THODE SIDE PRINTED LBEL Figure 15. Reeling Orientation 7
8 Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. s silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Please refer to vago pplication Note N 5288 for detail information. Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2 per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to vago pplication Note N5305 Handling of Moisture Sensitive Surface Mount Devices for details.. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40 /90%RH for 12 months. If the actual shelf life has exceeded 12 months and the HI indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is not recommended to open the MBB prior to assembly (e.g. for IQ). B. ontrol after opening the MBB - The humidity indicator card (HI) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30 / 60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 1 year.. ontrol for unfinished reel - For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH. D. ontrol of assembled boards - If the PB soldered with the LEDs is to be subjected to other high temperature processes, the PB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 1 year. E. Baking is required if: - 60% HI indicator is NOT blue. - The LEDs are exposed to condition of >30 / 60% RH at any time. - The LEDs floor life exceeded 1 year. Recommended baking condition: 60±5 for 20 hours. Device olor (X 1 ) Y Warm White Flux Bin Select (X 2 X 3 ) Individual reel will contain parts from one bin only X 2 Min Flux Bin X 3 Max Flux Bin Flux Bin Limits Bin ID Min. (lm) Max. (lm) B D E F G H J K L J K Tolerance of each bin limit = ± 12% olor Bin Select (X 4 ) Individual reel will contain parts from one sub bin only. X 4 0 Full Distribution H, J and K only B H, J, K, L and M only L and M only D L, M, N and P only E N and P only F N, P, Q and R only G Q and R only Z Special olor Bin 8
9 olor Bin Limits Bin ID Sub Bin ID Limits (hromaticity oordinates) H H3 x y H4 x y H5 x y J J3 x y J4 x y J5 x y K K3 x y K4 x y K5 x y L L3 x y L4 x y L5 x y M M3 x y M4 x y M5 x y N N3 x y N4 x y N5 x y Bin ID Sub Bin ID Limits (hromaticity oordinates) P P3 x y P4 x y P5 x y Q Q3 x y Q4 x y Q5 x y R R3 x y R4 x y R5 x y Tolerance of each bin limit = ±
10 0.45 Y-OORDINTE H4 H5 J4 J5 K3 K4 K5 L3 L4 L5 M3 N5 M5 N4 M4 P3 N3 3150K K P5 Q4 P4 R3 Q3 2800K K Q5 R4 R H3 J3 3650K K K K X-OORDINTE Packaging Option (X 5 ) Option Test urrent Package Type Reel Size E 150m Top Mount 7 Inch V F Bin Limits Bin ID Min. Max. S S S Tolerance of each bin limit = ±0.1V For product information and a complete list of distributors, please go to our web site: vago, vago Technologies, and the logo are trademarks of vago Technologies in the United States and other countries. Data subject to change. opyright vago Technologies. ll rights reserved. V EN - September 28, 2009
Features. Applications
SMT-QYB-Nxxxx Super 0.5W Warm White Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5W Warm White Power PL-4 SMT LED is Warm white mid-power PL-4 SMT LEDs using InGaN chip technology.
More informationFeatures. Applications
SMT-QWB-Nxxxx Super 0.5W ool White Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5W ool White Power PL-4 SMT LED is ool white mid-power PL-4 SMT LEDs using InGaN chip technology.
More informationASMT-QxBD-Axxxx Super 0.5 W Power PLCC-4 Surface Mount LED Indicator. Features. Applications
SMT-QxBD-xxxx Super 0.5 W Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5 W Power PL-4 SMT LED is an extension of Power PL-4 SMT LEDs. The package can be driven at high current
More informationASMT-QxBD-Axxxx Super 0.5 W Power PLCC-4 Surface Mount LED Indicator. Features. Applications
SMT-QxBD-xxxx Super 0.5 W Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5 W Power PL-4 SMT LED is an extension of Power PL-4 SMT LEDs. The package can be driven at high current
More informationFeatures. Applications
SMT-QxBE-Nxxxx Super.5W Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super.5W Power PL-4 SMT LED is first Blue & Green mid-power PL-4 SMT LEDs using InGaN chip technology. The package
More informationData Sheet. ASMT- Mx2x / ASMT- MxEx Moonstone TM 3W Power LED Light Source. Description. Features. Applications. Specifications
SMT- Mx2x / SMT- MxEx Moonstone TM 3W Power LED Light Source Data Sheet Description The Moonstone 3W Power LED Light Source is a high performance energy efficient device which can handle high thermal and
More informationData Sheet. ASMT-QWBG, ASMT-QWBH 0.5 W Cool White Power PLCC4 Surface Mount LED. Description. Features. Applications
ASMT-QWBG, ASMT-QWBH 0.5 W Cool White Power PLCC4 Surface Mount LED Data Sheet Description The Avago Technologies ASMT-QWBx series 0.5W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
More informationData Sheet. ASMT-Mx22 / ASMT-MxE2 Moonstone 3 W High Brightness Power LED Light Source. Description. Features. Specifications.
ASMT-Mx22 / ASMT-MxE2 Moonstone 3 W High Brightness Power LED Light Source Data Sheet Description The Moonstone 3W High Brightness Power LED Light Source is a high performance energy efficient device which
More informationASMT-MT00. Moonstone Tri-Color Power LED Light Source. Data Sheet. Description. Features. Applications. Specifications
Moonstone Tri-Color Power LED Light Source Description The Moonstone Tri-Color Power LED Light Source is a highperformance energy efficient device that can handle high thermal and high driving current.
More informationASMT-Mx22/ASMT-MxE2. Data Sheet. Moonstone 3W High Brightness Power LED Light Source. Features. Overview. Specifications.
Data Sheet ASMT-Mx22/ASMT-MxE2 Moonstone 3W High Brightness Power LED Light Source Overview The Moonstone 3W high brightness power LED light source is a high-performance energy-efficient device that can
More informationASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED. Datasheet
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet Description The Avago Technologies ASMT-UYBx series 0.25W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
More informationData Sheet. ASMT-Mx00. Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
More informationData Sheet. ASMT-Ax3x 3W Power LED Light Source. Features. Description. Applications
ASMT-Ax3x 3W Power LED Light Source Data Sheet Description This 3W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed
More informationASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
More informationASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
More informationData Sheet. ADJD-xMxx. High Power Light Strip, Ring & Round. Description. Features. Applications. Specifications
ADJD-xMxx High Power Light Strip, Ring & Round Data Sheet Description Avago s Light Strip, Ring & Round Power LEDs range of products offers a series of LEDs which provides better lifetime robustness and
More informationFeatures. Applications
ASMB-MTB1-A3A2 PLCC-4 Tricolor Black Surface LED Data Sheet Description This family of SMT LEDs are in PLCC-4 package. A wide viewing angle together with the built in reflector drives up the intensity
More informationASMT-UWBG / ASMT-UWBH / ASMT-UWBJ 0.25W Cool White Power PLCC4 Surface Mount LED Datasheet
ASMT-UWBG / ASMT-UWBH / ASMT-UWBJ 0.25W Cool White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
More informationHSMx-A2-xx-xxxxx Bi-Color HSMx-A3xx-xxxxx Tri-Color
Data Sheet HSMx-A3xx-xxxxx Tri-Color Description This family of SMT LEDs is packaged in the industry standard PLCC-4 package. These SMT LEDs have high reliability performance and are designed to work under
More informationASMT-YTB2-0BB02. Data Sheet. High Brightness Tricolor PLCC6 Black Surface LED. Features. Description. Applications
Data Sheet ASMT-YTB2-0BB02 High Brightness Tricolor PLCC6 Black Surface LED Description The high brightness black top surface tricolor PLCC-6 family of SMT LEDs has a separate heat path for each LED dice,
More informationData Sheet. ASMB-TTB0-0A3A2 High Brightness Tall Black Surface PLCC6 Tricolor LED. Description. Features. Applications
ASMB-TTB-A3A2 High Brightness Tall Black Surface PLCC6 Tricolor LED Data Sheet Description This family of SMT LEDs is packaged in the form of PLCC-6 with a separate heat path for each LED die, enabling
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet High Power LED 0.5W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 120 Typical color temperature: 3500 K. ESD protection. Soldering
More informationEHP-A23/RGB33-P01/TR. Data Sheet. Materials. High Power LED 1W. 1 of 12 Release Date: :11:33.0 Expired Period: Forever
Data Sheet Features Feature of the device: Small package with high efficiency Typical view angle: 120. ESD protection. Soldering methods: SMT Grouping parameter: Brightness, Forward Voltage and wavelength.
More informationReceived. Revised record
CHIN Series Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0001959 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2012.07.06 2 Change Product Labeling 2015.09.25
More informationReceived. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0000991 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2011.03.09 2 Change Format 2011.03.31 3 1. Change Color Binning
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Features Feature of the device: small package with high efficiency Typical color temperature: 3500 K. Typical view angle: 120. Typical light flux output: 33 lm @ 350mA ESD protection. Soldering methods:
More informationEHP-A07/UB01-P01. Technical Data Sheet High Power LED 1W
Technical Data Sheet High Power LED 1W Features feature of the device: small package with high efficiency View angle: 120. high luminous flux output: more than 9lm@350mA. ESD protection. soldering methods:
More informationReceived. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0000991 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2011.03.09 2 Change Format 2011.03.31 3 1. Change Color Binning
More informationEHP-AX08EL/UB01H-P01/B7B8/F3
Data Sheet Features Feature of the device: Small package with high efficiency Typical wavelength: 465nm Typical view angle: 150 Typical light flux output: 17 lm @ 350mA. ESD protection. Soldering methods:
More informationReceived. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0000878 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2010.08.25 2 3 4. 5 1.Change Format 2.Add VF V1 BIN 1.Change
More informationPower Top View LEDs 67-31EUZ-NP56B64DBBDA2638Z3-2T0T-AM
Power Top View LEDs Features Lead (Pb) Free Product - RoHS Compliant P-LCC-3 package. Colored diffused resin. Wide viewing angle 120 o. Inner reflector and white package. Qualification according to AEC-Q101
More informationReceived. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0001303 PAGE : 13 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2010.12.01 2 1.Change format 2.Change IV CCT VF BIN 3.Change
More informationEHP-AX08EL/GT01H-P03/5063/Y/N13
Data Sheet Features Feature of the device: Small package with high efficiency Typical color temperature: 5650 K. Typical viewing angle: 140 Typical light flux output: 160 lm @700mA. ESD protection. Soldering
More informationEAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
More informationPower Top View LEDs 67-11U-NP56B64DBACB2638Z2-2T0T-AM
Power Top View LEDs Features Lead (Pb) Free Product - RoHS Compliant P-LCC-2 package. Colored diffused resin. Wide viewing angle 120 o. Inner reflector and white package. Qualification according to AEC-Q101
More informationEAHP3030WA0 SMD HP. Features. Description. Applications. Revision : 1 LifecyclePhase:
SMD HP Features Top view white LED High luminous intensity output Typical Viewing Angle:120 Pb-free RoHS compliant Description The Everlight Americas package has high efficacy, high CRI, mid power consumption,
More informationEVERLIGHT ELECTRONICS CO., LTD.
Lead (Pb) Free Product - RoHS Compliant Feature P-LCC-2 package. Color diffused resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 180 to 450 mcd at 10mA. Precondition: Bases
More informationData Sheet. ASMT-Jx32 3W Mini Power LED Light Source. Description. Features. Applications
ASMT-J32 3W Mini Power LED Light Source Data Sheet Description The 3W Mini Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving current. The
More informationEL ALFS series. Preliminary ALFS1BD-PA07001L1-AM. Features. Applications. Package:Cool White LEDs on Ceramic substrate
EL ALFS series Preliminary Features Package:Cool White LEDs on Ceramic substrate Typ. PC Amber Wavelength:590~610 nm Typ. Luminous Flux:110 lm @ 700mA Viewing angle:cold White 120 o ESD up to 8KV MSL Level
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features P-LCC-2 package. Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated
More information1. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising. 3. Status indicators : Comsumer & industrial
Features: 1. Emitted Color : Yellow Green Package Dimensions: 2. Lens Appearance : Water Clear. 3. Mono-color type. 4. 3.2x1.6x1.1mm(126) standard package. 5. Suitable for all SMT assembly methods. 6.
More informationSMD Top View LEDs EAPL4014WA1
SMD Top View LEDs Features Top View White LEDs Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection The product itself will remain within RoHS compliant version. Description
More informationSMD Side View LEDs LM2C/L7580S76/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
More informationEVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet Feature RoHS compliant. Chip LED package. Wide viewing angle 130 o. Colorless clear resin. Wavelength: 605nm Brightness: 9 to 18 mcd at 2mA Inner reflector and white package. Useable
More informationHI-POWER / LED MICRO-08
HI-POWER / LED MICRO-08 FEATURES + Smallest form factor with up to 1.5W (500mA) output power + Ultra wide illumination field angle (FWHM 155 degree) + Low thermal resistance:
More informationMain Applications Backlighting Signaling Exterior Automotive Lighting Automotive Interior Lighting
ProLight PJ2N-FFPE-A 0.5W PC Amber Power LED Technical Datasheet Version: 1.1 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications
More informationShwo. 3W Series. Product Specification. Introduction
Product Specification Shwo 3W Series 爍 Shwo [Shuo] is the English translation for the Chinese word meaning Twinkle and is often used as a description of stars or other bright, celestial objects as seen
More informationTechnical Data Sheet Mini Top View LEDs
Features White SMT package. Optical indicator. Wide viewing angle. Soldering methods: IR reflow soldering Available on tape and reel Pb-free The product itself will remain within RoHS compliant version.
More informationTechnical Data Sheet Top View LEDs
Features P-LCC-2 package. Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated
More informationFeatures. Typical Applications G9 Candle Light. ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: DS-0384
ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: 1.1 Features High Color rendering index High flux per LED Good color uniformity Industry best moisture sensitivity level - JEDEC Level 1
More informationEVERLIGHT ELECTRONICS CO., LTD.
eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free.
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering ESD protection Pb-free The product itself will remain within RoHS compliant
More informationSMD Side View LEDs EAPL3810A17
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection. The product itself will remain
More informationHIGH POWER LED TSLG-WF7060-A07
HIGH POWER LED High Power LED Features Feature of the device Small package with high efficiency Color coordinates: x=0.33, y=0.33 according to CIE 1931 Typical color temperature: 5600 K View angle: 120
More informationTechnical Data Sheet Side View LEDs (Height 0.6mm)
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
More informationSMD Side View LEDs LM2C/L7277SG6/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
More informationAutomotive: Dashboards, stop lamps, turn signals. 2. Backlighting: LCDs, Key pads advertising.
Features: 1. Emitted Color : Super Red 2. Lens Appearance : Water Clear Package Dimensions: 3. Mono-color type. 4. 1.x.5x.4mm(42) standard package 5. Suitable for all SMT assembly methods. 6. Compatible
More informationAA2214VRBXS/A-TR-AMT 2.2 x 1.4 mm Surface Mount LED Lamp
2.2 x 1.4 mm Surface Mount LED Lamp DESCRIPTIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use
More informationSPEC NO: DSAJ6327 REV NO: V.1 DATE: JUL/31/2009 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED:
XPower PRELIMINARY SPEC KA-8070-2 SERIES Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES High efficient lightsource. Designed for high current operation. Low
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 1206 Package Chip LED (1.0mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationAPT1608SYCK-AMT. 1.6 x 0.8 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
1.6 x 0.8 mm SMD Chip LED Lamp DESCRIPTIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs
More information爍 (D) Shwo(D) 1W Series
Shwo(D) Introduction The Shwo(D) series is a surface-mount high-power device featuring high brightness combined with a compact size that is suitable for all kinds of lighting applications such as general
More information5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Descriptions. Features. Package Dimensions
5.0mm x 5.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5051XQR412ZXS-C1 Cool White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Suitable for all SMT assembly
More informationParameter Symbol Hi-Eff Red Yellow Green Unit
Features: 1. Emitted Color : and Package Dimensions: 2. Lens Appearance : Water Clear. 3. Bi-color type. 4. 3.2x2.7x1.1mm(121) standard package. 5. Suitable for all SMT assembly methods. 6. Compatible
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W
Technical Data Sheet High Power LED 1W Features Feature of the device: small package with high efficiency View angle: 130. High light flux output: more than 34lm@350mA. ESD protection. Soldering methods:
More informationEverlight EZHVD 1W LED Series
Everlight Introduction The High Voltage (HV) LED is a surface-mount high voltage component featuring compact size, high brightness, and DC input voltage that more closely resembles the V rms of AC mains
More informationSpicePlus mA White: SQW-WHG
SpicePlus2520 500mA White: SQW-WHG Super high brightness surface mount LED automotive exterior applications. 120 viewing angle. Compact package outline (LxW) of 2.5 x 2.0 mm. Ultra low height profile 0.7
More informationSpecification SSC-SZ5M
Specification SSC- RoHS (Rev.02_120103) SSC Customer Drawn Approval Approval 1 SSC- [ Contents ] 1. Description 2. Full code of SZ5-M series 3. Outline dimension 4. Characteristics of SZ5-M series 5. Characteristic
More informationTechnical Data Sheet - Preliminary Top View LEDs
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant version. Descriptions
More informationSpecification KWT803-S
Specification KWT803-S Drawn SSC Approval CUSTOMER Approval Contents 1. Description 2. Absolute Maximum Ratings 3. Electro-Optical Characteristics 4. Characteristic Graph 5. Reliability Test Item and Condition
More informationSMD B EASV1003WA1. Applications Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol.
SMD B Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product
More informationMain Applications CCTV Wireless communication Indoor Lighting Outdoor Lighting
ProLight PK2N-2LJE-SD 2W Infrared 850 Power LED Technical Datasheet Version: 1.6 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Superior
More informationSPEC NO: DSAJ6328 REV NO: V.1 DATE: JUL/31/2009 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED:
XPower PRELIMINARY SPEC KADS-8070-2 SERIES Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Super high flux output and high luminance. Designed for high current
More informationFeatures Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch
ProLight PM2G-1LYE-WSL 1W 370nm + 400nm Power LED Technical Datasheet Version: 1.3 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Typical
More information1. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising.
Features: 1. Emitted Color : Super Yellow Green Package Dimensions: 2. Lens Appearance : Water Clear 3. Mono-color type. 4. 1.6x.8x.6mm(63) standard package 5. Suitable for all SMT assembly methods. 6.
More informationPower Dissipation Pd 120 mw Forward Current I F 30 ma Peak Forward Current *1 I FP 100 ma 佰鴻工業股份有限公司
DATA SHEET DEVICE NUMBER: (For:2mA) SHEET 1 2 3 4 5 6 7 8 CONTENTS DATE 26.1.16 1. 1. 1. 1. 1. 1. 1. 1. Original Released 台北縣板橋市和平路 19 號 3 樓 3F., No. 19, Ho Ping Road, Pan Chiao City, 張 Taipei, Taiwan,
More informationDescription. Applications
3.0x2.5mm SURFACE MOUNT LED LAMP Features High reliability LED package. Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES 3.0mmx2.5mm SMT LED, 1.1mm
More informationSignalSure 150. Mid power solution AUTOMOTIVE. SignalSure 150 is a compact, surface-mount, mid power LED signaling
AUTOMOTIVE SignalSure 150 Mid power solution SignalSure 150 is a compact, surface-mount, mid power LED signaling solution that delivers an elevated standard of light output, flux density, and color uniformity.
More informationIS-1.2 NO.: BT-SMD
5Z3030AW35DBZQN2 Outline(L*W*H): 3.05*3.0*0.7 mm High flux efficiency & offer a middle power Good thermal dissipation & optical uniformity Table of Contents Product Code Method ----------------------------------------2
More informationEL Multi Color CH2525-RGBY0201H-AM. Preliminary. Features. Applications.
EL Multi Color Preliminary Features Package:, Green, Blue and Yellow color LEDs on Ceramic Package Emitted Color: 623nm ; Green 527nm ; Blue 460nm ; Yellow 590nm Typ Luminous Intensity: 627 mcd; Green
More informationMain Applications Bending light Fog lamp Day Running light(drl) Cornering light Working light Warning light
ProLight AJ2N-xA1DF-x 0.5W Power LED Technical Datasheet Version: 1.1 Features Best thermal material solution of the world Best Moisture Sensitivity:JEDEC Level 1 RoHS compliant AEC-Q101 Qualified SAE/ECE/GB
More information1. Automotive : Dashboards, stop lamps, turn signals. 2. Backlighting : LCDs, Key pads advertising. 3. Status indicators : Comsumer & industrial
Features: 1. Emitted Color : Super Red Package Dimensions: 2. Lens Appearance : Water Clear. 3. Mono-color type. 4. 3.2x1.x1.7mm(124) standard package. 5. Suitable for all SMT assembly methods. 6. Compatible
More information3W White SPHWHTA1N3C0
Product Family Data Sheet Rev. 01 2018.01.30 111 High Power LED FX Series 3W White SPHWHTA1N3C0 Features & Benefits Package : Silicone covered White LED package Dimension : 1.4 x 1.8 Chip Configuration
More informationMain Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PJ2N-2FPE-A2 2W PC Amber Power LED Technical Datasheet Version: 1.4 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications
More informationSPECIFICATIONS FOR UPEC SMD TYPE WHITE LED
SPEIFIATIONS FOR UPE SMD TYPE WHITE LED MODEL: Features P-L-2 package Wide viewing angle Inter reflector Available on tape and reel ( 8mm Tape ) Package Dimensions Part NO. hip Material Lens olor Source
More informationSMD MID Power LED 67-21S/KK5C-HXXXXXXXX2833Z6/2T(EMM)
Features PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant ANSI Binning Description The Everlight 67-21S package has high efficacy, high CRI, low
More information14W White SPHWH1A5NA30
Product Family Data Sheet Rev. 01 2017.10.16 111 High Power LED Ceramic Series 14W White SPHWH1A5NA30 Features & Benefits Package : Silicone covered ceramic substrate Dimension : 5.3 mm x 3.3 mm Technology
More informationMain Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PJDV-2FxE-3Rx 2W Power LED Technical Datasheet Version: 1.8 Features Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV High flux per LED Main Applications T8/T5 tube
More informationSuitable for all SMT assembly methods. 6. Compatible with infrared and vapor phase
Features: 1. Emitted Color : and. Package Dimensions: 2. Lens Appearance : Water Clear 3. Bicolor type. 4. 1.6x1.25x.4mm(65) standard package.15 5. Suitable for all SMT assembly methods. 6. Compatible
More informationSEOUL SEMICONDUCTOR CO., LTD.
SEOUL SEMICONDUCTOR ZPOWER LED Series Technical Datasheet for X92050 ZPower series is designed for high current operation and high flux output applications. Furthermore, its thermal management characteristic
More informationSpecification C9WT728
Specification C9WT728 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Description 2. Absolute Maximum Ratings 3. Electro-Optical Characteristics 4. Optical characteristics 5. Reliability Test 6. Color
More informationP8D1 P8D1. Features. Applications. Power UV LED Series is designed for high current operation and high flux output applications.
P8D1 Power UV LED Series is designed for high current operation and high flux output applications. P8D1 Features Super high Flux output and high Luminance Furthermore, its thermal management characteristic
More informationSMD MID Power LED 67-22ST/KK2C-HXXXXXXXXA7A9Z3/2T(PRE)
Features PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant ANSI Binning Description The Everlight 67-22S package has high efficacy, high CRI, low
More informationMain Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PJ2N-1FxE-2SC 1W Power LED Technical Datasheet Version: 1.5 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications T8/T5
More informationPower LED I TECHNICAL DATA
Power LED I TECHNICAL DATA W11290 N11290 B11290 G11290 R11290 C11290 A11290 14829, KasanDong, KeumchunGu, Seoul, Korea TEL : 82232816269 FAX : 8228575430 Rev03 2005/04 1 SPECIFICATIONS Features Super high
More informationSMD B 23-22B/R7G6C-A30/2A
SMD B Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product
More informationSMD MID Power LED 67-21S/KK4C-MXXXXXXXX2532U6/2T
Features PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant ANSI Binning Description The Everlight 67-21S package has high efficacy, high CRI, low
More information1.0(.039)± R0.25(.010) 2.0(.079)± (.020) Cathode Mark. Cathode
Features: 1. Emitted Color : and 2. Lens Appearance : Water Clear 3. Bicolor type. 4. 3.2x1.x2.mm(124) standard package 5. Suitable for all SMT assembly methods. 6. Compatible with infrared and vapor phase
More informationTechnical Data Sheet Top View LEDs
eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free.
More informationPower LED I TECHNICAL DATA
Power LED I TECHNICAL DATA W10190 N10190 D10190 B10190 G10190 R10190 C10190 A10190 Rev09 2005/09 1 SPECIFICATIONS Features Super high flux output and high luminance Designed for high current operation
More information