Numerical Heat and Mass Transfer

Size: px
Start display at page:

Download "Numerical Heat and Mass Transfer"

Transcription

1 Master degree in Mechanical Engineering Numerical Heat and Mass Transfer 02-Transient Conduction Fausto Arpino

2 Outline Introduction Conduction ü Heat conduction equation ü Boundary conditions ü One-Dimensional steady state heat conduction ü Transient conduction ü Dimensionless heat conduction equation ü Use of temperature charts 2

3 Introduction The concept of energy is used in thermodynamic to specify the state of a system. It is a wellknown fact the energy is neither created nor destroyed but only changed from one form to another. The science of thermodynamics deals with the relation between heat and other forms of energy The science of heat transfer is concerned with the analysis of the rate of heat transfer taking place in a system. The heat flow is not directly measurable, but its physical meaning is related to temperature measurement; the heat flow in a system takes place every time a temperature gradient is present. It has long been established by observations that when there is a temperature difference in a system, heat flows from the region of high temperature to that of low temperature. Since heat flow takes place whenever there is a temperature gradient in a system, a knowledge of the temperature distribution in a system is essential in heat transfer studies. 3

4 Conduction Once temperature distribution is known, a quantity of practical interest, the heat flux, which is the amount of heat transfer per unit area per unit time, is readily determined from the law relating the heat flux to temperature gradient. The empirical law of heat conduction is based on experimental observation conducted by Biot, but is generally named after the French mathematical physicist Joseph Fourier who used it in his analytic theory of heat. Heat flux vector q = k T Thermal conductivity(wm -1 K -1 ) There is a wide difference in the range of thermal conductivities of various engineering materials. Between gases and conducting metals, such as copper or silver, the thermal conductivity varies by a factor of about

5 Conduction Temperature ( C) 5

6 Heat Conduction Equation The heat conduction equation can be obtained by applying the energy conservation equation to a small element of matter. ( q x q x+dx )dydz + ( q y q y+dy )dxdz + q z q z+dz ( ) ( )dxdy + u '''dxdydz = ρe i ϑ dxdydz Net rate of heat by conduction Rate if energy generation Rate of increase if internal energy 6

7 Heat Conduction Equation The element under consideration is so small that the heat fluxes at the faces can be related accurately enough by means of the first two terms of a Taylor series expansion: q x+dx = q x + q x x q y+dy = q y + q y y q z+dz = q z + q z z 2 dx +o( dx ) 2 dy +o( dy ) 2 dz +o( dz ) Substituting in the energy balance equation: q x x + q y y + q z z Divergence of the heat flux vector dxdydz + u ''' dxdydz = ( ρe ) ϑ dxdydz 7

8 Heat Conduction Equation Using the Fourier law and the following assumptions: Constant thermal conductivity; Density ρ and specific heat c constant over the time. The one-dimensional case 2 T u ''' + 2 x k = 1 a T ϑ k 2 T + u ''' = ρc T ϑ Rectangular coordinates 1 r r r T r + u ''' k = 1 a T ϑ Cylindrical coordinates 1 r r r 2 T r + u ''' k = 1 a T ϑ Spherical coordinates 8

9 Heat Conduction Equation The heat conduction equation must be solved under appropriate initial and boundary conditions 1. Prescribed temperature boundary condition (First Kind) T = f ( P, ϑ) on the boundary S, ϑ > 0 2. Prescribed heat flux boundary condition (Second Kind) T n = f P, ϑ ( ) on the boundary S, ϑ > 0 3. Convection boundary condition (Third Kind) k T n + ht = f ( P, ϑ) on the boundary S, ϑ > 0 9

10 Conduction Slab with no heat generation In the case of prescribed temperature boundary condition, the heat conduction equation resolution provides: ( ) =T 1 x T T 1 2 T x L The heat flux through the slab is given by: dt dx = T T 1 2 L q = k dt dx Q = ka dt dx = ka ( L T T 1 2) 10

11 Conduction Slab with no heat generation In the case of convection boundary condition, the heat conduction equation resolution provides: h 1 ( T 1 T 1 ) = = k f 1 dt dx x=0 = k 1 dt dx x=0 + dt dt = k 2 = k dx f 2 = x= ( L1 dx +L 2 ) x= ( L1 +L 2 ) + ( ) = h 2 T 2 T 2 = 11

12 Conduction Cylinder in presence of heat generation Assuming a convection boundary condition and remembering the heat conduction equation in cylindrical coordinates Integrating 1 r d dr r dt dr + u ''' k = 0 dt dr r u ''' + 2k = C 1 r C 1 = 0 T = u '''r 2 4k +C 2 Application of the boundary condition: k dt dr re = h T r e ( ) T C 2 = T + u '''r e 2h + u '''r 2 e 4k T ( r ) T ( r e ) = u '''r 2 e 4k 1 r 2 r e 12

13 Conduction Transient one-dimensional problems In the following it will be assumend that the system interacts with an ambient of kwnown temperature The homogeneity of the boundary conditions ensures one-dimensional temperature field. Transient conduction problems Temperature field depends on time only? Temperature field depends on both time and space? DIMENSIONLESS FORM 13

14 Conduction Dimensionless transient heat conduction equation The transient heat conduction equation can be expressed in the dimensionless form by introducing appropriate dimensionless variables. 2 T u ''' + 2 x k = 1 a T ϑ x* = x, ϑ* = ϑ, T* = T T 2 T * x 0 ϑ 0 ΔT 0 x * + u '''x 2 0 = x 2 0 T * 2 kδt 0 aϑ 0 ϑ * The introduced constants are arbitrary and can be chosen as x 0 = L, ϑ 0 = L2 a, ΔT 0 = T i T 14

15 Conduction Dimensionless transient heat conduction equation The dimensionless transient heat conduction equation is: 2 T * u '''L2 + = T * 2 x * kδt 0 ϑ * The dimensionless boundary conditions are: T x ( 0, ϑ ) = 0 T * x * 0, ϑ * ( ) = 0 k T x ( L, ϑ ) = h T L, ϑ ( ) T T * x * 1, ϑ * ( ) = hl k T * 1, ϑ * ( ) 15

16 Conduction Dimensionless transient heat conduction equation In the dimensionless form of the transient heat conduction equation, the followind numbers of particular physical interest are evidenced Biot Number: Bi = hl k = Fourier Number ha ka L = Conductive resistance Surface resistance Fo = ϑ* = aϑ L 2 Bi 0,10 temperature field depends on time only Bi>0,10 temperature field depends on both time and space The Fourier number is a measure of the rate of heat conduction in comparison with the rate of heat storage in a given volume element. Therefore, the larger the Fourier number, the deeper the penetration of the heat into the solid over a given time. 16

17 Temperature charts By expressing the problem in the dimensionless form, the number of parameters affecting the temperature distribution is significantly reduced. Therefore it becomes feasible to solve a problem once and for all and present the results in the form of charts for ready reference. 17

18 Temperature charts 18

Time-Dependent Conduction :

Time-Dependent Conduction : Time-Dependent Conduction : The Lumped Capacitance Method Chapter Five Sections 5.1 thru 5.3 Transient Conduction A heat transfer process for which the temperature varies with time, as well as location

More information

Divergence Theorem and Its Application in Characterizing

Divergence Theorem and Its Application in Characterizing Divergence Theorem and Its Application in Characterizing Fluid Flow Let v be the velocity of flow of a fluid element and ρ(x, y, z, t) be the mass density of fluid at a point (x, y, z) at time t. Thus,

More information

QUESTION ANSWER. . e. Fourier number:

QUESTION ANSWER. . e. Fourier number: QUESTION 1. (0 pts) The Lumped Capacitance Method (a) List and describe the implications of the two major assumptions of the lumped capacitance method. (6 pts) (b) Define the Biot number by equations and

More information

Chapter 5 Time-Dependent Conduction

Chapter 5 Time-Dependent Conduction Chapter 5 Time-Dependent Conduction 5.1 The Lumped Capacitance Method This method assumes spatially uniform solid temperature at any instant during the transient process. It is valid if the temperature

More information

3.3 Unsteady State Heat Conduction

3.3 Unsteady State Heat Conduction 3.3 Unsteady State Heat Conduction For many applications, it is necessary to consider the variation of temperature with time. In this case, the energy equation for classical heat conduction, eq. (3.8),

More information

AE/ME 339. K. M. Isaac. 9/22/2005 Topic 6 FluidFlowEquations_Introduction. Computational Fluid Dynamics (AE/ME 339) MAEEM Dept.

AE/ME 339. K. M. Isaac. 9/22/2005 Topic 6 FluidFlowEquations_Introduction. Computational Fluid Dynamics (AE/ME 339) MAEEM Dept. AE/ME 339 Computational Fluid Dynamics (CFD) 1...in the phrase computational fluid dynamics the word computational is simply an adjective to fluid dynamics.... -John D. Anderson 2 1 Equations of Fluid

More information

Chapter 4: Transient Heat Conduction. Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University

Chapter 4: Transient Heat Conduction. Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University Chapter 4: Transient Heat Conduction Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University Objectives When you finish studying this chapter, you should be able to: Assess when the spatial

More information

Introduction to Heat and Mass Transfer. Week 7

Introduction to Heat and Mass Transfer. Week 7 Introduction to Heat and Mass Transfer Week 7 Example Solution Technique Using either finite difference method or finite volume method, we end up with a set of simultaneous algebraic equations in terms

More information

Conduction Heat Transfer. Fourier Law of Heat Conduction. Thermal Resistance Networks. Resistances in Series. x=l Q x+ Dx. insulated x+ Dx.

Conduction Heat Transfer. Fourier Law of Heat Conduction. Thermal Resistance Networks. Resistances in Series. x=l Q x+ Dx. insulated x+ Dx. Conduction Heat Transfer Reading Problems 17-1 17-6 17-35, 17-57, 17-68, 17-81, 17-88, 17-110 18-1 18-2 18-14, 18-20, 18-34, 18-52, 18-80, 18-104 Fourier Law of Heat Conduction insulated x+ Dx x=l Q x+

More information

Conduction Heat Transfer. Fourier Law of Heat Conduction. x=l Q x+ Dx. insulated x+ Dx. x x. x=0 Q x A

Conduction Heat Transfer. Fourier Law of Heat Conduction. x=l Q x+ Dx. insulated x+ Dx. x x. x=0 Q x A Conduction Heat Transfer Reading Problems 10-1 10-6 10-20, 10-48, 10-59, 10-70, 10-75, 10-92 10-117, 10-123, 10-151, 10-156, 10-162 11-1 11-2 11-14, 11-20, 11-36, 11-41, 11-46, 11-53, 11-104 Fourier Law

More information

Mechanical Engineering. Postal Correspondence Course HEAT TRANSFER. GATE, IES & PSUs

Mechanical Engineering. Postal Correspondence Course HEAT TRANSFER. GATE, IES & PSUs Heat Transfer-ME GATE, IES, PSU 1 SAMPLE STUDY MATERIAL Mechanical Engineering ME Postal Correspondence Course HEAT TRANSFER GATE, IES & PSUs Heat Transfer-ME GATE, IES, PSU 2 C O N T E N T 1. INTRODUCTION

More information

Numerical Heat and Mass Transfer

Numerical Heat and Mass Transfer Master Degree in Mechanical Engineering Numerical Heat and Mass Transfer 03 Finned Surfaces Fausto Arpino f.arpino@unicas.it Outline Introduction Straight fin with constant circular cross section Long

More information

FIND: (a) Sketch temperature distribution, T(x,t), (b) Sketch the heat flux at the outer surface, q L,t as a function of time.

FIND: (a) Sketch temperature distribution, T(x,t), (b) Sketch the heat flux at the outer surface, q L,t as a function of time. PROBLEM 5.1 NOWN: Electrical heater attached to backside of plate while front surface is exposed to convection process (T,h); initially plate is at a uniform temperature of the ambient air and suddenly

More information

q x = k T 1 T 2 Q = k T 1 T / 12

q x = k T 1 T 2 Q = k T 1 T / 12 Conductive oss through a Window Pane q T T 1 Examine the simple one-dimensional conduction problem as heat flow through a windowpane. The window glass thickness,, is 1/8 in. If this is the only window

More information

6. Laminar and turbulent boundary layers

6. Laminar and turbulent boundary layers 6. Laminar and turbulent boundary layers John Richard Thome 8 avril 2008 John Richard Thome (LTCM - SGM - EPFL) Heat transfer - Convection 8 avril 2008 1 / 34 6.1 Some introductory ideas Figure 6.1 A boundary

More information

Thermal Systems. What and How? Physical Mechanisms and Rate Equations Conservation of Energy Requirement Control Volume Surface Energy Balance

Thermal Systems. What and How? Physical Mechanisms and Rate Equations Conservation of Energy Requirement Control Volume Surface Energy Balance Introduction to Heat Transfer What and How? Physical Mechanisms and Rate Equations Conservation of Energy Requirement Control Volume Surface Energy Balance Thermal Resistance Thermal Capacitance Thermal

More information

Heat Conduction in 3D Solids

Heat Conduction in 3D Solids Chapter 1 Heat Conduction in 3D Solids In order to obtain the temperature distribution T(x,y,z,t) in a 3D body as a function of the point P(x,y,z) and of time t, it is necessary to study the problem of

More information

Chapter 1. Vector Analysis

Chapter 1. Vector Analysis Chapter 1. Vector Analysis Hayt; 8/31/2009; 1-1 1.1 Scalars and Vectors Scalar : Vector: A quantity represented by a single real number Distance, time, temperature, voltage, etc Magnitude and direction

More information

ASSUMPTIONS: (1) Homogeneous medium with constant properties, (2) Negligible radiation effects.

ASSUMPTIONS: (1) Homogeneous medium with constant properties, (2) Negligible radiation effects. PROBEM 5.88 KNOWN: Initial temperature of fire clay bric which is cooled by convection. FIND: Center and corner temperatures after 50 minutes of cooling. ASSUMPTIONS: () Homogeneous medium with constant

More information

Specific heat capacity. Convective heat transfer coefficient. Thermal diffusivity. Lc ft, m Characteristic length (r for cylinder or sphere; for slab)

Specific heat capacity. Convective heat transfer coefficient. Thermal diffusivity. Lc ft, m Characteristic length (r for cylinder or sphere; for slab) Important Heat Transfer Parameters CBE 150A Midterm #3 Review Sheet General Parameters: q or or Heat transfer rate Heat flux (per unit area) Cp Specific heat capacity k Thermal conductivity h Convective

More information

Lecture 10 Divergence, Gauss Law in Differential Form

Lecture 10 Divergence, Gauss Law in Differential Form Lecture 10 Divergence, Gauss Law in Differential Form ections: 3.4, 3.5, 3.6 Homework: ee homework file Properties of the Flux Integral: Recap flux is the net normal flow of the vector field F through

More information

Total energy in volume

Total energy in volume General Heat Transfer Equations (Set #3) ChE 1B Fundamental Energy Postulate time rate of change of internal +kinetic energy = rate of heat transfer + surface work transfer (viscous & other deformations)

More information

Heat and Mass Transfer Prof. S.P. Sukhatme Department of Mechanical Engineering Indian Institute of Technology, Bombay

Heat and Mass Transfer Prof. S.P. Sukhatme Department of Mechanical Engineering Indian Institute of Technology, Bombay Heat and Mass Transfer Prof. S.P. Sukhatme Department of Mechanical Engineering Indian Institute of Technology, Bombay Lecture No. 18 Forced Convection-1 Welcome. We now begin our study of forced convection

More information

Heat Transfer in a Slab

Heat Transfer in a Slab Heat Transfer in a Slab Consider a large planar solid whose thickness (y-direction) is L. What is the temperature history of the slab if it is suddenly brought into contact with a fluid at temperature

More information

MECH 375, Heat Transfer Handout #5: Unsteady Conduction

MECH 375, Heat Transfer Handout #5: Unsteady Conduction 1 MECH 375, Heat Transfer Handout #5: Unsteady Conduction Amir Maleki, Fall 2018 2 T H I S PA P E R P R O P O S E D A C A N C E R T R E AT M E N T T H AT U S E S N A N O PA R T I - C L E S W I T H T U

More information

TRANSIENT HEAT CONDUCTION

TRANSIENT HEAT CONDUCTION TRANSIENT HEAT CONDUCTION Many heat conduction problems encountered in engineering applications involve time as in independent variable. This is transient or Unsteady State Heat Conduction. The goal of

More information

Numerical Heat and Mass Transfer

Numerical Heat and Mass Transfer Master Degree in Mechanical Engineering Numerical Heat and Mass Transfer 15-Convective Heat Transfer Fausto Arpino f.arpino@unicas.it Introduction In conduction problems the convection entered the analysis

More information

Chapter 2: Heat Conduction Equation

Chapter 2: Heat Conduction Equation -1 General Relation for Fourier s Law of Heat Conduction - Heat Conduction Equation -3 Boundary Conditions and Initial Conditions -1 General Relation for Fourier s Law of Heat Conduction (1) The rate of

More information

Chapter 3: Transient Heat Conduction

Chapter 3: Transient Heat Conduction 3-1 Lumped System Analysis 3- Nondimensional Heat Conduction Equation 3-3 Transient Heat Conduction in Semi-Infinite Solids 3-4 Periodic Heating Y.C. Shih Spring 009 3-1 Lumped System Analysis (1) In heat

More information

Chapter 2: Heat Conduction. Dr Ali Jawarneh Department of Mechanical Engineering, Hashemite University

Chapter 2: Heat Conduction. Dr Ali Jawarneh Department of Mechanical Engineering, Hashemite University Chapter : Heat Conduction Equation Dr Ali Jawarneh Department of Mechanical Engineering, Hashemite University Objectives When you finish studying this chapter, you should be able to: Understand multidimensionality

More information

J. Szantyr Lecture No. 3 Fluid in equilibrium

J. Szantyr Lecture No. 3 Fluid in equilibrium J. Szantyr Lecture No. 3 Fluid in equilibrium Internal forces mutual interactions of the selected mass elements of the analysed region of fluid, forces having a surface character, forming pairs acting

More information

AME 513. " Lecture 7 Conservation equations

AME 513.  Lecture 7 Conservation equations AME 51 Principles of Combustion Lecture 7 Conservation equations Outline Conservation equations Mass Energy Chemical species Momentum 1 Conservation of mass Cubic control volume with sides dx, dy, dz u,

More information

ENGR Heat Transfer II

ENGR Heat Transfer II ENGR 7901 - Heat Transfer II Convective Heat Transfer 1 Introduction In this portion of the course we will examine convection heat transfer principles. We are now interested in how to predict the value

More information

Chapter 10: Steady Heat Conduction

Chapter 10: Steady Heat Conduction Chapter 0: Steady Heat Conduction In thermodynamics, we considered the amount of heat transfer as a system undergoes a process from one equilibrium state to another hermodynamics gives no indication of

More information

Introduction to Partial Differential Equations

Introduction to Partial Differential Equations Introduction to Partial Differential Equations Philippe B. Laval KSU Current Semester Philippe B. Laval (KSU) 1D Heat Equation: Derivation Current Semester 1 / 19 Introduction The derivation of the heat

More information

Summary of Dimensionless Numbers of Fluid Mechanics and Heat Transfer

Summary of Dimensionless Numbers of Fluid Mechanics and Heat Transfer 1. Nusselt number Summary of Dimensionless Numbers of Fluid Mechanics and Heat Transfer Average Nusselt number: convective heat transfer Nu L = conductive heat transfer = hl where L is the characteristic

More information

Laplace equation in polar coordinates

Laplace equation in polar coordinates Laplace equation in polar coordinates The Laplace equation is given by 2 F 2 + 2 F 2 = 0 We have x = r cos θ, y = r sin θ, and also r 2 = x 2 + y 2, tan θ = y/x We have for the partials with respect to

More information

Introduction to Heat and Mass Transfer. Week 9

Introduction to Heat and Mass Transfer. Week 9 Introduction to Heat and Mass Transfer Week 9 補充! Multidimensional Effects Transient problems with heat transfer in two or three dimensions can be considered using the solutions obtained for one dimensional

More information

Chapter 7: Natural Convection

Chapter 7: Natural Convection 7-1 Introduction 7- The Grashof Number 7-3 Natural Convection over Surfaces 7-4 Natural Convection Inside Enclosures 7-5 Similarity Solution 7-6 Integral Method 7-7 Combined Natural and Forced Convection

More information

Mathematics 205 Solutions for HWK 23. e x2 +y 2 dxdy

Mathematics 205 Solutions for HWK 23. e x2 +y 2 dxdy Mathematics 5 Solutions for HWK Problem 1. 6. p7. Let D be the unit disk: x + y 1. Evaluate the integral e x +y dxdy by making a change of variables to polar coordinates. D Solution. Step 1. The integrand,

More information

Consider a volume Ω enclosing a mass M and bounded by a surface δω. d dt. q n ds. The Work done by the body on the surroundings is

Consider a volume Ω enclosing a mass M and bounded by a surface δω. d dt. q n ds. The Work done by the body on the surroundings is The Energy Balance Consider a volume enclosing a mass M and bounded by a surface δ. δ At a point x, the density is ρ, the local velocity is v, and the local Energy density is U. U v The rate of change

More information

3: Mathematics Review

3: Mathematics Review 3: Mathematics Review B. Rouben McMaster University Course EP 4D03/6D03 Nuclear Reactor Analysis (Reactor Physics) 015 Sept.-Dec. 015 September 1 Review of: Table of Contents Co-ordinate systems (Cartesian,

More information

Introduction to Fluid Dynamics

Introduction to Fluid Dynamics Introduction to Fluid Dynamics Roger K. Smith Skript - auf englisch! Umsonst im Internet http://www.meteo.physik.uni-muenchen.de Wählen: Lehre Manuskripte Download User Name: meteo Password: download Aim

More information

University of Rome Tor Vergata

University of Rome Tor Vergata University of Rome Tor Vergata Faculty of Engineering Department of Industrial Engineering THERMODYNAMIC AND HEAT TRANSFER HEAT TRANSFER dr. G. Bovesecchi gianluigi.bovesecchi@gmail.com 06-7259-727 (7249)

More information

MULTIVARIABLE INTEGRATION

MULTIVARIABLE INTEGRATION MULTIVARIABLE INTEGRATION (PLANE & CYLINDRICAL POLAR COORDINATES) PLANE POLAR COORDINATES Question 1 The finite region on the x-y plane satisfies 1 x + y 4, y 0. Find, in terms of π, the value of I. I

More information

4. Analysis of heat conduction

4. Analysis of heat conduction 4. Analysis of heat conduction John Richard Thome 11 mars 2008 John Richard Thome (LTCM - SGM - EPFL) Heat transfer - Conduction 11 mars 2008 1 / 47 4.1 The well-posed problem Before we go further with

More information

Fundamentals of Fluid Dynamics: Ideal Flow Theory & Basic Aerodynamics

Fundamentals of Fluid Dynamics: Ideal Flow Theory & Basic Aerodynamics Fundamentals of Fluid Dynamics: Ideal Flow Theory & Basic Aerodynamics Introductory Course on Multiphysics Modelling TOMASZ G. ZIELIŃSKI (after: D.J. ACHESON s Elementary Fluid Dynamics ) bluebox.ippt.pan.pl/

More information

Darcy s law in 3-D. K * xx K * yy K * zz

Darcy s law in 3-D. K * xx K * yy K * zz PART 7 Equations of flow Darcy s law in 3-D Specific discarge (vector) is calculated by multiplying te ydraulic conductivity (second-order tensor) by te ydraulic gradient (vector). We obtain a general

More information

Review: Conduction. Breaking News

Review: Conduction. Breaking News CH EN 3453 Heat Transfer Review: Conduction Breaking News No more homework (yay!) Final project reports due today by 8:00 PM Email PDF version to report@chen3453.com Review grading rubric on Project page

More information

ELEC9712 High Voltage Systems. 1.2 Heat transfer from electrical equipment

ELEC9712 High Voltage Systems. 1.2 Heat transfer from electrical equipment ELEC9712 High Voltage Systems 1.2 Heat transfer from electrical equipment The basic equation governing heat transfer in an item of electrical equipment is the following incremental balance equation, with

More information

Session 5 Heat Conduction in Cylindrical and Spherical Coordinates I

Session 5 Heat Conduction in Cylindrical and Spherical Coordinates I Session 5 Heat Conduction in Cylindrical and Spherical Coordinates I 1 Introduction The method of separation of variables is also useful in the determination of solutions to heat conduction problems in

More information

Transient Heat Transfer Experiment. ME 331 Introduction to Heat Transfer. June 1 st, 2017

Transient Heat Transfer Experiment. ME 331 Introduction to Heat Transfer. June 1 st, 2017 Transient Heat Transfer Experiment ME 331 Introduction to Heat Transfer June 1 st, 2017 Abstract The lumped capacitance assumption for transient conduction was tested for three heated spheres; a gold plated

More information

Module 2 : Convection. Lecture 12 : Derivation of conservation of energy

Module 2 : Convection. Lecture 12 : Derivation of conservation of energy Module 2 : Convection Lecture 12 : Derivation of conservation of energy Objectives In this class: Start the derivation of conservation of energy. Utilize earlier derived mass and momentum equations for

More information

Figure 21:The polar and Cartesian coordinate systems.

Figure 21:The polar and Cartesian coordinate systems. Figure 21:The polar and Cartesian coordinate systems. Coordinate systems in R There are three standard coordinate systems which are used to describe points in -dimensional space. These coordinate systems

More information

Calculus III 2004 Summer Practice Final 8/3/2004

Calculus III 2004 Summer Practice Final 8/3/2004 .. Calculus III 4 ummer Practice Final 8/3/4. Compute the following limits if they exist: (a) lim (x,y) (,) e xy x+. cos x (b) lim x. (x,y) (,) x 4 +y 4 (a) ince lim (x,y) (,) exy and lim x + 6 in a (x,y)

More information

Fundamentals of Transport Processes Prof. Kumaran Indian Institute of Science, Bangalore Chemical Engineering

Fundamentals of Transport Processes Prof. Kumaran Indian Institute of Science, Bangalore Chemical Engineering Fundamentals of Transport Processes Prof. Kumaran Indian Institute of Science, Bangalore Chemical Engineering Module No # 05 Lecture No # 25 Mass and Energy Conservation Cartesian Co-ordinates Welcome

More information

Mathematics for Chemistry: Exam Set 1

Mathematics for Chemistry: Exam Set 1 Mathematics for Chemistry: Exam Set 1 June 18, 017 1 mark Questions 1. The minimum value of the rank of any 5 3 matrix is 0 1 3. The trace of an identity n n matrix is equal to 1-1 0 n 3. A square matrix

More information

External Forced Convection :

External Forced Convection : External Forced Convection : Flow over Bluff Objects (Cylinders, Spheres, Packed Beds) and Impinging Jets Chapter 7 Sections 7.4 through 7.8 7.4 The Cylinder in Cross Flow Conditions depend on special

More information

2.20 Fall 2018 Math Review

2.20 Fall 2018 Math Review 2.20 Fall 2018 Math Review September 10, 2018 These notes are to help you through the math used in this class. This is just a refresher, so if you never learned one of these topics you should look more

More information

Mechanical Energy. Kinetic Energy. Gravitational Potential Energy

Mechanical Energy. Kinetic Energy. Gravitational Potential Energy Mechanical Energy Kinetic Energy E k = 1 2 mv2 where E k is energy (kg-m 2 /s 2 ) v is velocity (m/s) Gravitational Potential Energy E g = W = mgz where w is work (kg-m 2 /s 2 ) m is mass (kg) z is elevation

More information

Chapter 2: Basic Governing Equations

Chapter 2: Basic Governing Equations -1 Reynolds Transport Theorem (RTT) - Continuity Equation -3 The Linear Momentum Equation -4 The First Law of Thermodynamics -5 General Equation in Conservative Form -6 General Equation in Non-Conservative

More information

Introduction to Heat and Mass Transfer. Week 8

Introduction to Heat and Mass Transfer. Week 8 Introduction to Heat and Mass Transfer Week 8 Next Topic Transient Conduction» Analytical Method Plane Wall Radial Systems Semi-infinite Solid Multidimensional Effects Analytical Method Lumped system analysis

More information

One dimensional steady state diffusion, with and without source. Effective transfer coefficients

One dimensional steady state diffusion, with and without source. Effective transfer coefficients One dimensional steady state diffusion, with and without source. Effective transfer coefficients 2 mars 207 For steady state situations t = 0) and if convection is not present or negligible the transport

More information

Chapter 2: Steady Heat Conduction

Chapter 2: Steady Heat Conduction 2-1 General Relation for Fourier s Law of Heat Conduction 2-2 Heat Conduction Equation 2-3 Boundary Conditions and Initial Conditions 2-4 Variable Thermal Conductivity 2-5 Steady Heat Conduction in Plane

More information

1.72, Groundwater Hydrology Prof. Charles Harvey Lecture Packet #4: Continuity and Flow Nets

1.72, Groundwater Hydrology Prof. Charles Harvey Lecture Packet #4: Continuity and Flow Nets 1.7, Groundwater Hydrology Prof. Charles Harvey Lecture Packet #4: Continuity and Flow Nets Equation of Continuity Our equations of hydrogeology are a combination of o Conservation of mass o Some empirical

More information

6 Div, grad curl and all that

6 Div, grad curl and all that 6 Div, grad curl and all that 6.1 Fundamental theorems for gradient, divergence, and curl Figure 1: Fundamental theorem of calculus relates df/dx over[a, b] and f(a), f(b). You will recall the fundamental

More information

(b) Find the range of h(x, y) (5) Use the definition of continuity to explain whether or not the function f(x, y) is continuous at (0, 0)

(b) Find the range of h(x, y) (5) Use the definition of continuity to explain whether or not the function f(x, y) is continuous at (0, 0) eview Exam Math 43 Name Id ead each question carefully. Avoid simple mistakes. Put a box around the final answer to a question (use the back of the page if necessary). For full credit you must show your

More information

Problem 1. Use a line integral to find the plane area enclosed by the curve C: r = a cos 3 t i + b sin 3 t j (0 t 2π). Solution: We assume a > b > 0.

Problem 1. Use a line integral to find the plane area enclosed by the curve C: r = a cos 3 t i + b sin 3 t j (0 t 2π). Solution: We assume a > b > 0. MATH 64: FINAL EXAM olutions Problem 1. Use a line integral to find the plane area enclosed by the curve C: r = a cos 3 t i + b sin 3 t j ( t π). olution: We assume a > b >. A = 1 π (xy yx )dt = 3ab π

More information

5.2 Surface Tension Capillary Pressure: The Young-Laplace Equation. Figure 5.1 Origin of surface tension at liquid-vapor interface.

5.2 Surface Tension Capillary Pressure: The Young-Laplace Equation. Figure 5.1 Origin of surface tension at liquid-vapor interface. 5.2.1 Capillary Pressure: The Young-Laplace Equation Vapor Fo Fs Fs Fi Figure 5.1 Origin of surface tension at liquid-vapor interface. Liquid 1 5.2.1 Capillary Pressure: The Young-Laplace Equation Figure

More information

INSTRUCTOR: PM DR MAZLAN ABDUL WAHID

INSTRUCTOR: PM DR MAZLAN ABDUL WAHID SMJ 4463: HEAT TRANSFER INSTRUCTOR: PM ABDUL WAHID http://www.fkm.utm.my/~mazlan TEXT: Introduction to Heat Transfer by Incropera, DeWitt, Bergman, Lavine 5 th Edition, John Wiley and Sons Chapter 9 Natural

More information

Consider a volume Ω enclosing a mass M and bounded by a surface δω. d dt. q n ds. The Work done by the body on the surroundings is.

Consider a volume Ω enclosing a mass M and bounded by a surface δω. d dt. q n ds. The Work done by the body on the surroundings is. The Energy Balance Consider a volume Ω enclosing a mass M and bounded by a surface δω. δω At a point x, the density is ρ, the local velocity is v, and the local Energy density is U. U v The rate of change

More information

Conservation of Mass. Computational Fluid Dynamics. The Equations Governing Fluid Motion

Conservation of Mass. Computational Fluid Dynamics. The Equations Governing Fluid Motion http://www.nd.edu/~gtryggva/cfd-course/ http://www.nd.edu/~gtryggva/cfd-course/ Computational Fluid Dynamics Lecture 4 January 30, 2017 The Equations Governing Fluid Motion Grétar Tryggvason Outline Derivation

More information

Chapter 4 TRANSIENT HEAT CONDUCTION

Chapter 4 TRANSIENT HEAT CONDUCTION Heat and Mass Transfer: Fundamentals & Applications Fourth Edition Yunus A. Cengel, Afshin J. Ghajar McGraw-Hill, 2011 Chapter 4 TRANSIENT HEAT CONDUCTION LUMPED SYSTEM ANALYSIS Interior temperature of

More information

Gauss s Law & Potential

Gauss s Law & Potential Gauss s Law & Potential Lecture 7: Electromagnetic Theory Professor D. K. Ghosh, Physics Department, I.I.T., Bombay Flux of an Electric Field : In this lecture we introduce Gauss s law which happens to

More information

Part 8. Differential Forms. Overview. Contents. 1 Introduction to Differential Forms

Part 8. Differential Forms. Overview. Contents. 1 Introduction to Differential Forms Part 8 Differential Forms Printed version of the lecture Differential Geometry on 25. September 2009 Tommy R. Jensen, Department of Mathematics, KNU 8.1 Overview Contents 1 Introduction to Differential

More information

College of Engineering Summer Session Heat Transfer - ME 372 Dr. Saeed J. Almalowi,

College of Engineering Summer Session Heat Transfer - ME 372 Dr. Saeed J. Almalowi, 2.. Fin s efficiency and effectiveness The fin efficiency is defined as the ratio of the heat transfer to the fin to the heat transfer to an ideal fin. η th = q fin ha fin (T b T ), T f = T, and A fin

More information

Conductors and Dielectrics

Conductors and Dielectrics 5.1 Current and Current Density Conductors and Dielectrics Electric charges in motion constitute a current. The unit of current is the ampere (A), defined as a rate of movement of charge passing a given

More information

MATH 52 FINAL EXAM SOLUTIONS

MATH 52 FINAL EXAM SOLUTIONS MAH 5 FINAL EXAM OLUION. (a) ketch the region R of integration in the following double integral. x xe y5 dy dx R = {(x, y) x, x y }. (b) Express the region R as an x-simple region. R = {(x, y) y, x y }

More information

Disclaimer: This Final Exam Study Guide is meant to help you start studying. It is not necessarily a complete list of everything you need to know.

Disclaimer: This Final Exam Study Guide is meant to help you start studying. It is not necessarily a complete list of everything you need to know. Disclaimer: This is meant to help you start studying. It is not necessarily a complete list of everything you need to know. The MTH 234 final exam mainly consists of standard response questions where students

More information

Notes 3 Review of Vector Calculus

Notes 3 Review of Vector Calculus ECE 3317 Applied Electromagnetic Waves Prof. David R. Jackson Fall 2018 A ˆ Notes 3 Review of Vector Calculus y ya ˆ y x xa V = x y ˆ x Adapted from notes by Prof. Stuart A. Long 1 Overview Here we present

More information

Classification of algebraic surfaces up to fourth degree. Vinogradova Anna

Classification of algebraic surfaces up to fourth degree. Vinogradova Anna Classification of algebraic surfaces up to fourth degree Vinogradova Anna Bases of algebraic surfaces Degree of the algebraic equation Quantity of factors The algebraic surfaces are described by algebraic

More information

Charge and current elements

Charge and current elements Charge and current elements for 1-, 2- and 3-dimensional integration Frits F.M. de Mul Presentations: Electromagnetism: History Electromagnetism: Electr. topics Electromagnetism: Magn. topics Electromagnetism:

More information

the Cartesian coordinate system (which we normally use), in which we characterize points by two coordinates (x, y) and

the Cartesian coordinate system (which we normally use), in which we characterize points by two coordinates (x, y) and 2.5.2 Standard coordinate systems in R 2 and R Similarly as for functions of one variable, integrals of functions of two or three variables may become simpler when changing coordinates in an appropriate

More information

Introduction to Heat and Mass Transfer. Week 5

Introduction to Heat and Mass Transfer. Week 5 Introduction to Heat and Mass Transfer Week 5 Critical Resistance Thermal resistances due to conduction and convection in radial systems behave differently Depending on application, we want to either maximize

More information

Vector Calculus. Dr. D. Sukumar

Vector Calculus. Dr. D. Sukumar Vector Calculus Dr. D. Sukumar Space co-ordinates Change of variable Cartesian co-ordinates < x < Cartesian co-ordinates < x < < y < Cartesian co-ordinates < x < < y < < z < Cylindrical Cylindrical Cylindrical

More information

Chapter 2 HEAT CONDUCTION EQUATION

Chapter 2 HEAT CONDUCTION EQUATION Heat and Mass Transfer: Fundamentals & Applications Fourth Edition Yunus A. Cengel, Afshin J. Ghajar McGraw-Hill, 2011 Chapter 2 HEAT CONDUCTION EQUATION Mehmet Kanoglu University of Gaziantep Copyright

More information

AE/ME 339. Computational Fluid Dynamics (CFD) K. M. Isaac. Momentum equation. Computational Fluid Dynamics (AE/ME 339) MAEEM Dept.

AE/ME 339. Computational Fluid Dynamics (CFD) K. M. Isaac. Momentum equation. Computational Fluid Dynamics (AE/ME 339) MAEEM Dept. AE/ME 339 Computational Fluid Dynamics (CFD) 9//005 Topic7_NS_ F0 1 Momentum equation 9//005 Topic7_NS_ F0 1 Consider the moving fluid element model shown in Figure.b Basis is Newton s nd Law which says

More information

29.3. Integral Vector Theorems. Introduction. Prerequisites. Learning Outcomes

29.3. Integral Vector Theorems. Introduction. Prerequisites. Learning Outcomes Integral ector Theorems 9. Introduction arious theorems exist relating integrals involving vectors. Those involving line, surface and volume integrals are introduced here. They are the multivariable calculus

More information

Unsteady State Heat Conduction in a Bounded Solid How Does a Solid Sphere Cool?

Unsteady State Heat Conduction in a Bounded Solid How Does a Solid Sphere Cool? Unstead State Heat Conduction in a Bounded Solid How Does a Solid Sphere Cool? We examined the cooling a sphere of radius R. Initiall the sphere is at a uniform temperature T 0. It is cooled b convection

More information

1 R-value = 1 h ft2 F. = m2 K btu. W 1 kw = tons of refrigeration. solar = 1370 W/m2 solar temperature

1 R-value = 1 h ft2 F. = m2 K btu. W 1 kw = tons of refrigeration. solar = 1370 W/m2 solar temperature Quick Reference for Heat Transfer Analysis compiled by Jason Valentine and Greg Walker Please contact greg.alker@vanderbilt.edu ith corrections and suggestions copyleft 28: You may copy, distribute, and

More information

Heat processes. Heat exchange

Heat processes. Heat exchange Heat processes Heat exchange Heat energy transported across a surface from higher temperature side to lower temperature side; it is a macroscopic measure of transported energies of molecular motions Temperature

More information

Solution. This is a routine application of the chain rule.

Solution. This is a routine application of the chain rule. EXAM 2 SOLUTIONS 1. If z = e r cos θ, r = st, θ = s 2 + t 2, find the partial derivatives dz ds chain rule. Write your answers entirely in terms of s and t. dz and dt using the Solution. This is a routine

More information

UNIVERSITY OF SOUTH CAROLINA

UNIVERSITY OF SOUTH CAROLINA UNIVERSITY OF SOUTH CAROLINA ECHE 460 CHEMICAL ENGINEERING LABORATORY I Heat Transfer Analysis in Solids Prepared by: M. L. Price, and Professors M. A. Matthews and T. Papathansiou Department of Chemical

More information

OPAC102. The Acoustic Wave Equation

OPAC102. The Acoustic Wave Equation OPAC102 The Acoustic Wave Equation Acoustic waves in fluid Acoustic waves constitute one kind of pressure fluctuation that can exist in a compressible fluid. The restoring forces responsible for propagating

More information

Mathematics for Chemistry: Exam Set 1

Mathematics for Chemistry: Exam Set 1 Mathematics for Chemistry: Exam Set 1 March 19, 017 1 mark Questions 1. The maximum value of the rank of any 5 3 matrix is (a (b3 4 5. The determinant of an identity n n matrix is equal to (a 1 (b -1 0

More information

1. Nusselt number and Biot number are computed in a similar manner (=hd/k). What are the differences between them? When and why are each of them used?

1. Nusselt number and Biot number are computed in a similar manner (=hd/k). What are the differences between them? When and why are each of them used? 1. Nusselt number and Biot number are computed in a similar manner (=hd/k). What are the differences between them? When and why are each of them used?. During unsteady state heat transfer, can the temperature

More information

Come & Join Us at VUSTUDENTS.net

Come & Join Us at VUSTUDENTS.net Come & Join Us at VUSTUDENTS.net For Assignment Solution, GDB, Online Quizzes, Helping Study material, Past Solved Papers, Solved MCQs, Current Papers, E-Books & more. Go to http://www.vustudents.net and

More information

Mathematical Concepts & Notation

Mathematical Concepts & Notation Mathematical Concepts & Notation Appendix A: Notation x, δx: a small change in x t : the partial derivative with respect to t holding the other variables fixed d : the time derivative of a quantity that

More information

Module 2: Governing Equations and Hypersonic Relations

Module 2: Governing Equations and Hypersonic Relations Module 2: Governing Equations and Hypersonic Relations Lecture -2: Mass Conservation Equation 2.1 The Differential Equation for mass conservation: Let consider an infinitely small elemental control volume

More information

Chapter 9: Differential Analysis

Chapter 9: Differential Analysis 9-1 Introduction 9-2 Conservation of Mass 9-3 The Stream Function 9-4 Conservation of Linear Momentum 9-5 Navier Stokes Equation 9-6 Differential Analysis Problems Recall 9-1 Introduction (1) Chap 5: Control

More information