Penn State Center for Acoustics and Vibration (CAV)
|
|
- Ronald Wilkinson
- 5 years ago
- Views:
Transcription
1 Penn State Center for Acoustics and Vibration (CAV) Structural Vibration and Acoustics Group Presented as part of the 2015 CAV Spring workshop Stephen Hambric, Group Leader May 2015 Robert Campbell James Chatterley Stephen Conlon Tyler Dare John Fahnline Sabih Hayek Tony Jun Huang Kevin Koudela Dan Russell Micah Shepherd Alok Sinha
2 Today s topics CAV Panel vibration and stress induced by supersonic jet flow Matt Shaw, PhD student, and Dr. Steve Hambric Acoustic Tweezers Li Peng, PhD student, and Dr. Tony Jun Hwang Turbine blade mistuning and friction damping Dr. Alok Sinha April /12
3 Other Student Projects CAV Student posters: Offshore wind turbine flow-induced vibration and structural integrity Javier Motta-Mena, MS; Dr. Robert L. Campbell, advisor Fluid-structure interaction modeling of blood clot migration and entrapment in the inferior vena cava Key Aycock, PhD, Dr. Rob Campbell, advisor Quiet structure design using embedded acoustic black holes Phil Feurtado, PhD, Dr. Steve Conlon, advisor Just starting out: Accelerated fatigue testing of composites Chet Kupchella, MS; Drs. Hambric and Campbell, advisors Nonlinear flow-induced structural damping Trevor Jerome, PhD. Drs. Hambric and Shepherd, advisors April /12
4 CAV Flow-excited ribbed panel optimization 1 Principal Investigator: Matt Shaw, PhD student, Acoustics Dr. S.A. Hambric and Dr. R.L. Campbell, Advisors Sponsor: April /12
5 CAV April /12
6 Supersonic Nozzle Discharge Flow CAV April /12
7 CFD LES Simulations CAV April /12
8 Simulated Structural Response CAV April /12
9 Simulated vs. Measured Structural Displacement CAV April /12
10 Wavenumber Analysis CAV April /12
11 Wavenumber Analysis Streamwise Excitation CAV April /12
12 Wavenumber Analysis Negative Streamwise Excitation CAV April /12
13 Vibration of a Bladed Rotor : Mistuning and Friction Damping by Alok Sinha Professor of Mechanical Engineering, The Pennsylvania State University, University Park,
14 Importance of Mistuning Forced Vibratory amplitude of one blade can be 2-3 times amplitudes of other blades Mode Localization: Connection with Anderson Localization Analytical Complexities caused by Mistuning Cyclic Symmetry is lost. Sector Analysis is not applicable Variations in Blades Properties: Random Variables Need to determine probability distribution functions of vibratory amplitudes Monte Carlo Simulation Reduced Order Models are required which can accurately analyze a mistuned system without incurring the costs of full order model.
15 Eigenvectors are not unique for repeated eigenvalues Kt ( αp + βpn ) = λ mt ( αp + βpn ) In case of mistuning, repeated eigenvalues split, and there are unique eigenvectors. Nodal Diameter Map Mode Localization Mode# 5 Mode# 19
16 Integrally Bladed Rotors (IBR) or Blisk Aerodynamically Efficient Reduced number of parts Blade to Blade Geometry Variations Very Low Damping Damage in one blade may lead to replacement of the whole IBR
17 A Major Breakthrough in Mistuning Research MMDA (Modified Modal Domain Analysis) proper orthogonal decomposition of Coordinate Measurement Machine (CMM) data on blades geometries sector analyses using ANSYS and UNIGRAPHICS. Validated on an academic rotor at P&W A. Sinha, Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning, ASME Journal of Turbomachinery, Vol. 131, July 2009
18 POD # 0-6 POD # 0-12 POD # 0-9 POD # 0-15 Continued.. 6
19 All POD used in MMDA POD# 0 to 17 7
20 Transonic Rotor Random Permutation/Monte Carlo test
21 Computation of the Optimal Normal Load for a Mistuned and Frictionally Damped Bladed Disk Assembly under Different Types of Excitation Deterministic Sinusoidal Excitation White Noise Narrow Band Random Excitation Sinusoidal Excitation with Random Amplitudes
22 damper force µ f F N stuck slip Blade Blade stuck x c stuck x slip µ f F N Idealized damper Idealized damper Ground Ground Blade-to-Ground damper Blade-to-Blade damper
23 x c x st = slip distance, = response of the tuned system when the friction dampers are fully stuck : R st = E[ xst 2 ] σ st = R st xst = Ast sin ωstt + Bst cosωstt 2 2 Ra st E[ Ast + Bst ], rms x st = 0. 5Ra µ R σ, R µ Ra σ, R a = ( ) st the mean and standard deviation of response variance the mean and standard deviation of mean-square amplitude
24 Friction Damping of Flutter Point 2 f 0 = 0 Point 1
25 CONCLUDING REMARKS MMDA: Accurate Reduced- Order Model for a Mistuned Bladed Rotor A Major Breakthrough in Mistuning Research Statistics of Forced Vibration Amplitudes via Random Permutations Reduced Order Model of a Multi-stage Bladed Rotor with Geometric Mistuning Design of Friction Dampers to Reduce Resonant Vibratory Stresses of Blades Sinusoidal Excitation and Random Excitations. Non-dimensional Slip Load is almost invariant to nature of excitation. Design of Friction Dampers to Mitigate Flutter in a Bladed Rotor
Penn State Center for Acoustics and Vibration (CAV)
Penn State Center for Acoustics and Vibration () Structural Vibration and Acoustics Group Presented as part of the 2017 Spring workshop Stephen Hambric, Group Leader Ben Beck Robert Campbell James Chatterley
More informationPenn State Center for Acoustics and Vibration (CAV)
Penn State Center for Acoustics and Vibration () Structural Vibration and Acoustics Group Presented as part of the 2013 Spring workshop Stephen Hambric, Group Leader Marty Trethewey Stephen Conlon Andrew
More informationPenn State Center for Acoustics and Vibration
Penn State Center for Acoustics and Vibration Structural Vibration and Acoustics Group Presented as part of the 2012 Spring workshop Stephen Hambric, Group Leader Marty Trethewey Stephen Conlon Andrew
More informationPenn State Center for Acoustics and Vibration
Penn State Center for Acoustics and Vibration Structural Vibration and Acoustics Group Presented as part of the 2010 Spring workshop Stephen Hambric, Group Leader Marty Trethewey Stephen Conlon Liming
More informationVibration characteristics analysis of a centrifugal impeller
Vibration characteristics analysis of a centrifugal impeller Di Wang 1, Guihuo Luo 2, Fei Wang 3 Nanjing University of Aeronautics and Astronautics, College of Energy and Power Engineering, Nanjing 210016,
More informationNONLINEAR REDUCED ORDER MODELS AND DAMAGE DETECTION IN SYSTEMS WITH COMPLEX GEOMETRY
NONLINEAR REDUCED ORDER MODELS AND DAMAGE DETECTION IN SYSTEMS WITH COMPLEX GEOMETRY by Chulwoo Jung A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy
More informationAEROELASTICITY IN AXIAL FLOW TURBOMACHINES
von Karman Institute for Fluid Dynamics Lecture Series Programme 1998-99 AEROELASTICITY IN AXIAL FLOW TURBOMACHINES May 3-7, 1999 Rhode-Saint- Genèse Belgium STRUCTURAL DYNAMICS: BASICS OF DISK AND BLADE
More informationEffects of Mistuning on the Forced Response of Bladed Discs with Friction Dampers
Response of Bladed Discs with Friction Dampers E.P. Petrov and D.J. Ewins Mechanical Engineering Department Imperial College London, South Kensington Campus London, SW7 2AZ, United Kingdom y.petrov@imperial.ac.uk,
More informationDesign of the blisk of an aircraft turbojet engine and verification of its resonance free operation
Applied and Computational Mechanics 10 (2016) 5 14 Design of the blisk of an aircraft turbojet engine and verification of its resonance free operation L. Chromek a, a První brněnská strojírna Velká Bíteš,
More informationFORCED RESPONSE COMPUTATION FOR BLADED DISKS INDUSTRIAL PRACTICES AND ADVANCED METHODS
FORCED RESPONSE COMPUTATION FOR BLADED DISKS INDUSTRIAL PRACTICES AND ADVANCED METHODS E. Seinturier * Turbomeca (SAFRAN) Bordes, France Abstract The aero-mechanical optimisation of turbomachinery bladed
More informationBlade Mechanics Seminar: Abstracts
Blade Mechanics Seminar: Abstracts ZHAW Zurich University of Applied Sciences IMES Institute of Mechanical Systems in Winterthur, Switzerland Wednesday, September 1, 2010 Lecture Hall, SM 01.01, Theaterstrasse
More informationStochastic Modeling of Geometric Mistuning and Application to Fleet Response Prediction
Wright State University CORE Scholar Browse all Theses and Dissertations Theses and Dissertations 24 Stochastic Modeling of Geometric Mistuning and Application to Fleet Response Prediction Emily Brooke
More informationFinite Element Modules for Demonstrating Critical Concepts in Engineering Vibration Course
Finite Element Modules for Demonstrating Critical Concepts in Engineering Vibration Course Shengyong Zhang Assistant Professor of Mechanical Engineering College of Engineering and Technology Purdue University
More informationModeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions
JOURNAL OF PROPULSION AND POWER Vol. 22, No. 2, March April 2006 Modeling and Analysis of Mistuned Bladed Disk Vibration: Status and Emerging Directions Matthew P. Castanier University of Michigan, Ann
More informationFATIGUE LIFE PREDICTION OF TURBOMACHINE BLADING
FATIGUE LIFE PREDICTION OF TURBOMACHINE BLADING Sanford Fleeter, Chenn Zhou School of Mechanical Engineering Elias Houstis, John Rice Department of Computer Sciences Purdue University West Lafayette, Indiana
More informationFinite Element Analysis Lecture 1. Dr./ Ahmed Nagib
Finite Element Analysis Lecture 1 Dr./ Ahmed Nagib April 30, 2016 Research and Development Mathematical Model Mathematical Model Mathematical Model Finite Element Analysis The linear equation of motion
More information18 th Blade Mechanics Seminar: Abstracts
18 th Blade Mechanics Seminar: Abstracts ZHAW Zurich University of Applied Sciences IMES Institute of Mechanical Systems in Winterthur, Switzerland Wednesday, September 11 th, 2013 Eulachpassage, TN E0.58,
More information19 th Blade Mechanics Seminar: Abstracts
19 th Blade Mechanics Seminar: Abstracts ZHAW Zurich University of Applied Sciences IMES Institute of Mechanical Systems in Winterthur, Switzerland Thursday, September 11 th, 2014 Eulachpassage, TN E0.58,
More informationPrediction of Axial Compressor Blade Vibration by Modelling Fluid-Structure Interaction
Prediction of Axial Compressor Blade Vibration by Fluid-Structure Interaction by J. D Brandsen Supervisors: Dr S. J. van der Spuy Prof G. Venter Faculty of Engineering at Stellenbosch University Department
More informationStatic and Dynamic Analysis of mm Steel Last Stage Blade for Steam Turbine
Applied and Computational Mechanics 3 (2009) 133 140 Static and Dynamic Analysis of 1 220 mm Steel Last Stage Blade for Steam Turbine T. Míšek a,,z.kubín a aškoda POWER a. s., Tylova 57, 316 00 Plzeň,
More informationExplicit Finite Element Models of Friction Dampers in Forced Response Analysis of Bladed Disks
E. P. Petrov Centre of Vibration Engineering, Mechanical Engineering Department, Imperial College London, South Kensington Campus, London SW7 2AZ, UK e-mail: y.petrov@imperial.ac.uk Explicit Finite Element
More informationTutorial on the Vibroacoustics of Composite Sandwich Panels
Tutorial on the Vibroacoustics of Composite Sandwich Panels Stephen A. Hambric 1 1 Applied Research Lab, Penn State University, USA ABSTRACT Composite sandwich panels are used throughout the aerospace
More informationAbstracts 22 nd Blade Mechanics Seminar
Abstracts 22 nd Blade Mechanics Seminar Tuesday, 12 th September 2017 Eulachpassage, TN E0.58, Technikumstrasse 71, 8401 Winterthur, Switzerland ZHAW Zurich University of Applied Sciences IMES Institute
More informationBlade Group Fatigue Life Calculation under Resonant Stresses
TEM Journal. Volume 6, Issue, Pages 73-80, ISSN 227-8309, DOI: 0.842/TEM6-25, February 207. Blade Group Fatigue Life Calculation under Resonant Stresses Zlatko Petreski, Goce Tasevski Ss. Cyril and Methodius
More informationA Guide to linear dynamic analysis with Damping
A Guide to linear dynamic analysis with Damping This guide starts from the applications of linear dynamic response and its role in FEA simulation. Fundamental concepts and principles will be introduced
More informationPropagation of Uncertainty in Stress Estimation in Turbine Engine Blades
Propagation of Uncertainty in Stress Estimation in Turbine Engine Blades Giorgio Calanni, Vitali Volovoi, and Massimo Ruzzene Georgia Institute of Technology Atlanta, Georgia and Charles Vining Naval Air
More informationSAMCEF For ROTORS. Chapter 1 : Physical Aspects of rotor dynamics. This document is the property of SAMTECH S.A. MEF A, Page 1
SAMCEF For ROTORS Chapter 1 : Physical Aspects of rotor dynamics This document is the property of SAMTECH S.A. MEF 101-01-A, Page 1 Table of Contents rotor dynamics Introduction Rotating parts Gyroscopic
More informationRandom Vibrations & Failure Analysis Sayan Gupta Indian Institute of Technology Madras
Random Vibrations & Failure Analysis Sayan Gupta Indian Institute of Technology Madras Lecture 1: Introduction Course Objectives: The focus of this course is on gaining understanding on how to make an
More informationHISTORY OF EVOLUTION, PROGRESS AND APPLICATION OF SAFE DIAGRAM FOR TUNED AND MISTUNED SYSTEMS. Murari Singh, Ph.D
Proceedings of the Forty-Second Turbomachinery Symposium October 1-3, 213, Houston, Texas HISTORY OF EVOLUTION, PROGRESS AND APPLICATION OF SAFE DIAGRAM FOR TUNED AND MISTUNED SYSTEMS Murari Singh, Ph.D
More informationBroadband Vibration Response Reduction Using FEA and Optimization Techniques
Broadband Vibration Response Reduction Using FEA and Optimization Techniques P.C. Jain Visiting Scholar at Penn State University, University Park, PA 16802 A.D. Belegundu Professor of Mechanical Engineering,
More informationAnalysis of Structural Mistuning Effects on Bladed Disc Vibrations Including Aerodynamic Damping
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 24 Analysis of Structural Mistuning Effects on Bladed Disc Vibrations Including Aerodynamic
More informationDynamic modeling and vibration analysis of mistuned bladed disks
Dynamic modeling and vibration analysis of mistuned bladed disks Gísli Óttarsson To cite this version: Gísli Óttarsson. Dynamic modeling and vibration analysis of mistuned bladed disks. Mechanics [physics.med-ph].
More informationFrequency Failure Investigation on Shrouded Steam Turbine Blade through Dynamic Analysis
Frequency Failure Investigation on Shrouded Steam Turbine Blade through Dynamic Analysis P. Nagababu 1, TSSR Krishna 2, M. Venkata naveen 3 M.Tech Student, Department of Mechanical Engineering, SVEC, Andhra
More informationEffects of Damping and Varying Contact Area at Blade-Disk Joints in Forced Response Analysis of Bladed Disk Assemblies
E. P. Petrov D. J. Ewins Centre of Vibration Engineering, Mechanical Engineering Department, Imperial College London, South Kensington Campus, London SW7 2AZ, UK Effects of Damping and Varying Contact
More informationMode family identification of a blisk by tip timing measurements
Abstract : Mode family identification of a blisk by tip timing measurements Vsevolod Kharyton a, Claude Gibert a, Laurent Blanc a, Fabrice Thouverez a a. Laboratory of Tribology and System Dynamics UMR5513,
More information1663. Dynamic mechanism and parametric analysis of shrouded blades in aircraft engines
1663. Dynamic mechanism and parametric analysis of shrouded blades in aircraft engines Guofang Nan 1, Yuanlu Zhang 2 School of Energy and Power Engineering, University of Shanghai for Science and Technology,
More informationForced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial Turbine
International Journal of Gas Turbine, Propulsion and Power Systems October 217, Volume 9, Number 3 Forced Response Excitation due to Stagger Angle Variation in a Multi-Stage Axial Turbine Thomas Hauptmann
More informationFatigue Life Prediction of Turbomachine Blading
Purdue University Purdue e-pubs Department of Computer Science Technical Reports Department of Computer Science 1999 Fatigue Life Prediction of Turbomachine Blading Sanford Fleeter Chem Zhou Elias N. Houstis
More informationThe written qualifying (preliminary) examination covers the entire major field body of knowledge
Dynamics The field of Dynamics embraces the study of forces and induced motions of rigid and deformable material systems within the limitations of classical (Newtonian) mechanics. The field is intended
More informationAsymptotic Description of Damping Mistuning Effects on the Forced Response of Turbomachinery Bladed Disks
AFRL-AFOSR-UK-TR-22-28 Asymptotic Description of Damping Mistuning Effects on the Forced Response of Turbomachinery Bladed Diss Professor Carlos Martel Universidad Politecnica de Madrid Depto. Fundamentos
More informationA Study of the Unsteady Flow Field and Turbine Vibration Characteristic of the Supersonic Partial Admission Turbine for a Rocket Engine
Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan A Study of the Unsteady Flow Field and Turbine Vibration Characteristic of the Supersonic Partial Admission
More informationFlow-Induced Noise Technical Group
Flow-Induced Noise Technical Group Center for Acoustics and Vibration Spring Workshop May 4, 2010 Presented by: Dean E. Capone, Group Leader 1 Overview The mission of the Flow-Induced Noise Group of the
More informationDynamometry Tutorial IMECE
Dynamometry Tutorial IMECE2013-62800 2013 International Mechanical Engineering Congress and Exposition, San Diego, California Dr. Michael L. Jonson The Pennsylvania State University Applied Research Laboratory
More informationNONLINEAR VIBRATION ANALYSIS OF CRACKED STRUCTURES APPLICATION TO TURBOMACHINERY ROTORS WITH CRACKED BLADES
NONLINEAR VIBRATION ANALYSIS OF CRACKED STRUCTURES APPLICATION TO TURBOMACHINERY ROTORS WITH CRACKED BLADES by Akira Saito A dissertation submitted in partial fulfillment of the requirements for the degree
More informationApproximate A-priori Estimation of the Response Amplification Due to. Geometric and Young's Modulus Mistuning. Saurav Sahoo
Approximate A-priori Estimation of the Response Amplification Due to Geometric and Young's Modulus Mistuning by Saurav Sahoo A Thesis Presented in Partial Fulfillment of the Requirements for the Degree
More informationAbstracts 23 rd Blade Mechanics Seminar
Abstracts 23 rd Blade Mechanics Seminar Tuesday, 11 th September 2018 Eulachpassage, TN E0.58, Technikumstrasse 71, 8401 Winterthur, Switzerland ZHAW Zurich University of Applied Sciences IMES Institute
More informationA NEW METHOD FOR VIBRATION MODE ANALYSIS
Proceedings of IDETC/CIE 25 25 ASME 25 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference Long Beach, California, USA, September 24-28, 25 DETC25-85138
More informationLecture 9: Harmonic Loads (Con t)
Lecture 9: Harmonic Loads (Con t) Reading materials: Sections 3.4, 3.5, 3.6 and 3.7 1. Resonance The dynamic load magnification factor (DLF) The peak dynamic magnification occurs near r=1 for small damping
More informationAssessment of Blade Mistuning Effects via Power Flow Analysis of Tuned Bladed Disks
Assessment of Blade Mistuning Effects via Power Flow Analysis of Tuned Bladed Disks Sanghum Baik, Matthew P. Castanier and Christophe Pierre Department of Mechanical Engineering, The University of Michigan,
More informationChapter 5: Random Vibration. ANSYS Mechanical. Dynamics. 5-1 July ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.
Chapter 5: Random Vibration ANSYS Mechanical Dynamics 5-1 July 2009 Analysis Random Vibration Analysis Topics covered: Definition and purpose Overview of Workbench capabilities Procedure 5-2 July 2009
More informationA STUDY ON THE FRACTURE A SIROCCO FAN IMPELLER
FIFTH INTERNATIONAL CONGRESS ON SOUND AND VIBRATION DECEMBER 15-18, 1997 ADELAIDE, SOUTH AUSTRALIA A STUDY ON THE FRACTURE A SIROCCO FAN IMPELLER OF S.P. Lee, C.O. Ahn, H.S. Rew, S.C. Park, Y.M. Park and
More informationDevelopment and Validation of a Numerical Tool for the Aeromechanical Design of Turbomachinery
Development and Validation of a Numerical Tool for the Aeromechanical Design of Turbomachinery María Angélica Mayorca Licentiate Thesis 2010 Department of Energy Technology School of Industrial Technology
More informationTheoretical Manual Theoretical background to the Strand7 finite element analysis system
Theoretical Manual Theoretical background to the Strand7 finite element analysis system Edition 1 January 2005 Strand7 Release 2.3 2004-2005 Strand7 Pty Limited All rights reserved Contents Preface Chapter
More informationT1 T e c h n i c a l S e c t i o n
1.5 Principles of Noise Reduction A good vibration isolation system is reducing vibration transmission through structures and thus, radiation of these vibration into air, thereby reducing noise. There
More informationAdvanced experimental techniques for turbine blades dynamic characterization
Advanced experimental techniques for turbine blades dynamic characterization Authors: Nicola Mitaritonna (Ge Oil&Gas Testing Laboratory) Stefano Cioncolini (Ge Oil&Gas Testing Laboratory) Francesco Piraccini
More informationPREDICTION AND VALIDATION OF HIGH-PERFORMANCE CENTRIFUGAL COMPRESSOR IMPELLER FORCED RESPONSE
Paper ID: ETC2017-260 Proceedings of 12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics ETC12, April 3-7, 2017; Stockholm, Sweden PREDICTION AND VALIDATION OF HIGH-PERFORMANCE CENTRIFUGAL
More informationDr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum
STRUCTURAL DYNAMICS Dr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum Overview of Structural Dynamics Structure Members, joints, strength, stiffness, ductility Structure
More informationPRACTICE NO. PD-ED-1259 PREFERRED May 1996 RELIABILITY PAGE 1 OF 6 PRACTICES ACOUSTIC NOISE REQUIREMENT
PREFERRED May 1996 RELIABILITY PAGE 1 OF 6 PRACTICES Practice: Impose an acoustic noise requirement on spacecraft hardware design to ensure the structural integrity of the vehicle and its components in
More informationVIBRATION ANALYSIS OF E-GLASS FIBRE RESIN MONO LEAF SPRING USED IN LMV
VIBRATION ANALYSIS OF E-GLASS FIBRE RESIN MONO LEAF SPRING USED IN LMV Mohansing R. Pardeshi 1, Dr. (Prof.) P. K. Sharma 2, Prof. Amit Singh 1 M.tech Research Scholar, 2 Guide & Head, 3 Co-guide & Assistant
More informationFluid structure interaction dynamic analysis of a mixed-flow waterjet pump
IOP Conference Series: Materials Science and Engineering OPEN ACCESS Fluid structure interaction dynamic analysis of a mixed-flow waterjet pump To cite this article: X W Pan et al 2013 IOP Conf. Ser.:
More informationAssessment of Probabilistic Methods for Mistuned Bladed Disk Vibration
46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference 18-21 April 2005, Austin, Texas AIAA 2005-1990 Assessment of Probabilistic Methods for Mistuned Bladed Disk Vibration
More information1427. Response and performance of a nonlinear vibration isolator with high-static-low-dynamic-stiffness under shock excitations
1427. Response and performance of a nonlinear vibration isolator with high-static-low-dynamic-stiffness under shock excitations Yong Wang 1, Shunming Li 2, Jiyong Li 3, Xingxing Jiang 4, Chun Cheng 5 College
More informationFinite element analysis of rotating structures
Finite element analysis of rotating structures Dr. Louis Komzsik Chief Numerical Analyst Siemens PLM Software Why do rotor dynamics with FEM? Very complex structures with millions of degrees of freedom
More informationMEASUREMENT BY THERMOELASTICITY ON PLASTIC FAN BLADE. A. Di Renzo, M. Marsili, M. Moretti, G.L. Rossi
MEASUREMENT BY THERMOELASTICITY ON PLASTIC FAN BLADE A. Di Renzo, M. Marsili, M. Moretti, G.L. Rossi Dipartimento di Ingegneria Industriale Università degli Studi di Perugia Via Duranti, 1 06125 Perugia,
More informationStochastic Dynamics of SDOF Systems (cont.).
Outline of Stochastic Dynamics of SDOF Systems (cont.). Weakly Stationary Response Processes. Equivalent White Noise Approximations. Gaussian Response Processes as Conditional Normal Distributions. Stochastic
More informationRESONANCE VIBRATIONS FORMATION FEATURES OF REGULAR SYSTEMS WITH A BREATHING CRACK
RESONANCE VIBRATIONS FORMATION FEATURES OF REGULAR SYSTEMS WITH A BREATHING CRACK Vadym Kruts, Anatoliy Zinkovskii, and Yevheniia Onyshchenko Department of Vibrations and Vibration Resistance, G.S. Pisarenko
More informationDynamic Characteristics of Blade-Disk-Rotor System with Structural Mistuned Features
Send Orders for Reprints to reprints@benthamscience.ae 18 The Open Mechanical Engineering Journal, 14, 8, 18-14 Open Access Dynamic Characteristics of Blade-Disk-Rotor System with Structural Mistuned Features
More informationTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. 345 E. 47th St., New York, N.Y
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 345 E. 47th St., New York, N.Y. 10017 The Society shall not be responsible for statements or opinions advanced in papers or discussion at meetings of the Society
More informationCalculation of the Forced Response of a Turbine Bladed. Disk with Underplatform Dampers
Calculation of the Forced Response of a Turbine Bladed Disk with Underplatform Dampers BY EMANUELE GROSSI B.S., Politecnico di Torino, Turin, Italy, 214 THESIS Submitted as partial fulfillment of the requirements
More informationFlow-Induced Noise Technical Group
Flow-Induced Noise Technical Group Center for Acoustics and Vibration Spring Workshop April 30, 2014 Presented by: Dean E. Capone, Group Leader 1 Overview The mission of the Flow-Induced Noise Group of
More informationEFFECT ON THE AERODYNAMIC FORCING IN AN AXIAL TURBINE STAGE ON VARYING STATOR BLADE SHAPE
28 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES EFFECT ON THE AERODYNAMIC FORCING IN AN AXIAL TURBINE STAGE ON VARYING STATOR BLADE SHAPE Hassan. S*, Corporella. M**,Robertson. M***, Zhuang.
More informationComposite Structures- Modeling, FEA, Optimization and Diagnostics
Composite Structures- Modeling, FEA, Optimization and Diagnostics Ratan Jha Mechanical and Aeronautical Engineering Clarkson University, Potsdam, NY Composite Laminate Modeling Refined Higher Order Displacement
More informationModal and Static Structural Analysis of Exhaust Collector Box for Compressor test facility
Modal and Static Structural Analysis of Exhaust Collector Box for Compressor test facility Shankar Gouda 1, Praveen M P 2 P G student, Department of Mechanical Engineering, EPCET, Bangalore, Karnataka,
More informationRandom Vibration Analysis for Impellers of Centrifugal Compressors Through the Pseudo- Excitation Method
APCOM & ICM 11-14 th December, 013, ingapore Random Vibration Analysis for Impellers of Centrifugal Compressors Through the Pseudo- Excitation Method *Y.F. Wang 1,,. J. Wang 1,, and L.H. Huang 3 1 Department
More informationTowards Rotordynamic Analysis with COMSOL Multiphysics
Towards Rotordynamic Analysis with COMSOL Multiphysics Martin Karlsson *1, and Jean-Claude Luneno 1 1 ÅF Sound & Vibration *Corresponding author: SE-169 99 Stockholm, martin.r.karlsson@afconsult.com Abstract:
More information1859. Forced transverse vibration analysis of a Rayleigh double-beam system with a Pasternak middle layer subjected to compressive axial load
1859. Forced transverse vibration analysis of a Rayleigh double-beam system with a Pasternak middle layer subjected to compressive axial load Nader Mohammadi 1, Mehrdad Nasirshoaibi 2 Department of Mechanical
More informationA REDUCED ORDER MODEL OF MISTUNING USING A SUBSET OF NOMINAL SYSTEM MODES. M.-T. Yang
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Park Avenue, New Yorks N.Y. 10016-5990 99-GT-288 The Society shall not be responsible for statements or opinions advanced in papers or discussion at meetings
More informationVibration Analysis of a Centrifugal Pump
Vibration Analysis of a Centrifugal Pump A. Naveen Varma 1, K. Bala Bhaskar 1, B. Sai Kumar 1, G.Giridhar 1, Vamsi Raja 2, P. Phani Prasanthi 3 1Research Scholars 1Department of Mechanical Engineering,
More informationFundamental Understanding of Blisk Analytical Response
Wright State University CORE Scholar Browse all Theses and Dissertations Theses and Dissertations 2013 Fundamental Understanding of Blisk Analytical Response Joseph A. Beck Wright State University Follow
More informationDEVELOPMENT OF MICROSLIP FRICTION MODELS AND FORCED RESPONSE PREDICTION METHODS FOR FRICTIONALLY CONSTRAINED TURBINE BLADES
DEVELOPMENT OF MICROSLIP FRICTION MODELS AND FORCED RESPONSE PREDICTION METHODS FOR FRICTIONALLY CONSTRAINED TURBINE BLADES DISSERTATION Presented in Partial Fulfillment of the Requirements for the Degree
More information2028. Life estimation of the beam with normal distribution parameters and subjected to cyclic load
2028. Life estimation of the beam with normal distribution parameters and subjected to cyclic load Changyou Li 1, Xuchu Wang 2, Wei Wang 3, Yimin Zhang 4, Song Guo 5 1, 2, 3, 4 School of Mechanical Engineering
More informationA pragmatic approach to including complex natural modes of vibration in aeroelastic analysis
A pragmatic approach to including complex natural modes of vibration in aeroelastic analysis International Aerospace Symposium of South Africa 14 to 16 September, 215 Stellenbosch, South Africa Louw van
More informationVIBRATORY STRESS ANALYSIS AND FATIGUE LIFE ESTIMATION OF TURBINE BLADE
VIBRATORY STRESS ANALYSIS AND FATIGUE LIFE ESTIMATION OF TURBINE BLADE By NALINAKSH S. VYAS A Thesis Submitted in fulfilment of the requirments of the degree of DOCTOR OF PHILOSOPHY. Z a xi UTE OR r o
More informationEFFECT OF TAPER AND TWISTED BLADE IN STEAM TURBINES
EFFECT OF TAPER AND TWISTED BLADE IN STEAM TURBINES Tulsidas.D 1, M.Shantharaja 2 1 Department of Mechanical Engineering, Acharya Institute of Technology, Bangalore-560107, (India) 2 Department of Mechanical
More informationSimulating Two-Dimensional Stick-Slip Motion of a Rigid Body using a New Friction Model
Proceedings of the 2 nd World Congress on Mechanical, Chemical, and Material Engineering (MCM'16) Budapest, Hungary August 22 23, 2016 Paper No. ICMIE 116 DOI: 10.11159/icmie16.116 Simulating Two-Dimensional
More informationChapter 23: Principles of Passive Vibration Control: Design of absorber
Chapter 23: Principles of Passive Vibration Control: Design of absorber INTRODUCTION The term 'vibration absorber' is used for passive devices attached to the vibrating structure. Such devices are made
More informationCOMPARISON OF MODE SHAPE VECTORS IN OPERATIONAL MODAL ANALYSIS DEALING WITH CLOSELY SPACED MODES.
IOMAC'5 6 th International Operational Modal Analysis Conference 5 May-4 Gijón - Spain COMPARISON OF MODE SHAPE VECTORS IN OPERATIONAL MODAL ANALYSIS DEALING WITH CLOSELY SPACED MODES. Olsen P., and Brincker
More informationIn this lecture you will learn the following
Module 9 : Forced Vibration with Harmonic Excitation; Undamped Systems and resonance; Viscously Damped Systems; Frequency Response Characteristics and Phase Lag; Systems with Base Excitation; Transmissibility
More informationRESONANCE IDENTIFICATION FOR IMPELLERS
RESONANCE IDENTIFICATION FOR IMPELLERS by Murari P. Singh Chief Engineer and Manager of Engineering Technology Bhabesh K. Thakur Senior Structural Analyst William E. Sullivan Senior Structural Analyst
More informationA New Method for Optimizing Friction Damping in Randomly Excited Systems
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 345 E. 4T St., New York, N.Y. 007 89-GT-08 A The Society shall not be responsible for statements or op ions advanced in papers or in dis. cussion at meetings
More information3D Finite Element Modeling and Vibration Analysis of Gas Turbine Structural Elements
3D Finite Element Modeling and Vibration Analysis of Gas Turbine Structural Elements Alexey I. Borovkov Igor A. Artamonov Computational Mechanics Laboratory, St.Petersburg State Polytechnical University,
More informationDr. N.V.Srinivasulu, S.Jaikrishna, A.Navatha
PSD Analysis of an Automobile Dash Panel Dr. N.V.Srinivasulu, S.Jaikrishna, A.Navatha Abstract:-In this paper, PSD analysis of an automobile dash panel is performed in order to reduce the vibrations that
More informationThe Behaviour of Simple Non-Linear Tuned Mass Dampers
ctbuh.org/papers Title: Authors: Subject: Keyword: The Behaviour of Simple Non-Linear Tuned Mass Dampers Barry J. Vickery, University of Western Ontario Jon K. Galsworthy, RWDI Rafik Gerges, HSA & Associates
More informationTOWARD DEVELOPING A PROBABILISTIC METHODOLOGY FOR PREDICTING HIGH-CYCLE FRETTING FATIGUE IN AERO-ENGINES
Proceedings of ASME Turbo Expo 2010 Power for Land, Sea, &Air June 14-18, 2010, Glasgow, Scotland, UK GT2010-23007 TOWARD DEVELOPING A PROBABILISTIC METHODOLOGY FOR PREDICTING HIGH-CYCLE FRETTING FATIGUE
More informationREDUCED ORDER MODELING METHODS FOR TURBOMACHINERY DESIGN
REDUCED ORDER MODELING METHODS FOR TURBOMACHINERY DESIGN A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy By JEFFREY M. BROWN B.S., Georgia Institute
More informationInvestigation on fluid added mass effect in the modal response of a pump-turbine runner
IOP Conference Series: Materials Science and Engineering OPEN ACCESS Investigation on fluid added mass effect in the modal response of a pump-turbine runner To cite this article: L Y He et al 2013 IOP
More informationIdentification of Damping Using Proper Orthogonal Decomposition
Identification of Damping Using Proper Orthogonal Decomposition M Khalil, S Adhikari and A Sarkar Department of Aerospace Engineering, University of Bristol, Bristol, U.K. Email: S.Adhikari@bristol.ac.uk
More information41514 Dynamics of Machinery
41514 Dynamics of Machinery Theory, Experiment, Phenomenology and Industrial Applications Ilmar Ferreira Santos 1. Recapitulation Mathematical Modeling & Steps 2. Example System of Particle 3. Example
More information1439. Numerical simulation of the magnetic field and electromagnetic vibration analysis of the AC permanent-magnet synchronous motor
1439. Numerical simulation of the magnetic field and electromagnetic vibration analysis of the AC permanent-magnet synchronous motor Bai-zhou Li 1, Yu Wang 2, Qi-chang Zhang 3 1, 2, 3 School of Mechanical
More informationNonlinear Dynamic Characteristics of a Simple Blade with Breathing Crack Using Ansys Software
World Journal of Mechanics, 2011, 1, 21-30 doi:10.4236/wjm.2011.12004 Published Online April 2011 (http://www.scirp.org/journal/wjm) Nonlinear Dynamic Characteristics of a Simple Blade with Breathing Crack
More information