Number Title Year Organization Page
|
|
- Damian Whitehead
- 5 years ago
- Views:
Transcription
1 Id Number Title Year Organization Page S1.1 Acoustical Terminology Errata; ASA 111 R(1999) 1994 ASA S1.4 Specification for Sound Level Meters ASA ASA S1.6 Preferred Frequencies, Frequency Levels, and Band Numbers for Acoustical Measurements ASA ASA S1.8 Reference Quantities for Acoustical Levels ASA R(2001) 1989 ASA S1.9 Instruments for the Measurement of Sound Intensity ASA 117 R(2001) 1996 ASA S1.10 Method for the Calibration of Microphones R(2001) 1966 ASA S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog and Digital Filters ASA ASA 0 R(1998) S1.13 Measurement of Sound Pressure Levels in Air ASA R(1999) 1995 ASA S1.14 Recommendations for Specifying and Testing the Susceptibility of Acoustical Instruments to Radiated 1998 ASA 0 Radio-Frequency Electromagnetic Fields, 25 MHz to 1 GHz R(2003) S1.15 PART 1 Measurement Microphones - Part 1: Specifications for Laboratory Standard Microphones R(2001) 1997 ASA S1.16 Method for Measuring the Performance of Noise Discriminating and Noise Canceling Microphones 2000 ASA 0 ANSI S S1.17 PART 1 Microphone Windscreens - Part 1: Measurements and Specification of Insertion Loss in Still or Slighty 2000 ASA 0 Moving Air ANSI S S1.18 Template Method for Ground Impedance ANSI S ASA S1.20 Procedures for Calibration of Underwater Electro- Acoustic Transducers ASA R(2003) 1988 ASA S1.22 Scales and Sizes for Frequency Characteristics and Polar Diagrams in Acoustics ASA 100 R(2002) 1992 ASA S1.24 TR Bubble Detection and Cavitation Monitoring 2002 ASA S1.25 Specification for Personal Noise Dosimeters ASA 98 R(2002) 1991 ASA S1.26 Method for Calculation of the Absorption of Sound by the Atmosphere ASA 113 R(1999) 1995 ASA S1.40 Specification for Acoustical Calibrators ASA R(2001) 1984 ASA S1.42 Design Response of Weighting Networks for Acoustical Measurements 2001 ASA S1.43 Specifications for Integrating-Averaging Sound Level Meters R(2002) 1998 ASA S2.1 Vibration and Shock - Vocabulary 2000 ASA S2.2 Methods for the Calibration of Shock and Vibration Pickups R(2001) 1959 ASA S2.3 Specifications for a High-Impact Shock Machine for Electronic Devices R(2001) 1964 ASA S2.4 Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration 1976 ASA 0 Measurements ASA R(2001) S2.5 Recommendations for Specifying the Performance of Vibration Machines R(2001) 1962 ASA S2.7 Balancing Terminology ASA R(2001) 1982 ASA S2.8 Guide for Describing the Characteristics of Resilient Mountings R(2001) 1972 ASA S2.9 Nomenclature for Specifying Damping Properties of Materials ASA R(2001) 1976 ASA S2.10 Methods for Analysis and Presentation of Shock and Vibration Data R(2001) 1971 ASA S2.11 Selection of Calibrations and Tests for Electrical Transducers Used for Measuring Shock and Vibration 1969 ASA 0 R(1997) S2.13 PART 1 Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and 1996 ASA 0 Evaluation - Part 1: General Guidelines R(2001) S2.14 Methods for Specifying the Performance of Shock Machines R(2001) 1973 ASA S2.15 Specification for the Design, Construction, and Operation of Class HI (High-Impact) Shock-Testing 1972 ASA 0 Machine for Lightweight Equipment R(2001) S2.16 Vibratory Noise Measurements and Acceptance Criteria of Shipboard Equipment R(2001) 1997 ASA S2.17 Techniques of Machinery Vibration Measurement ASA R(2001) 1980 ASA 0
2 19726 S2.19 Mechanical Vibration - Balance Quality Requirements of Rigid Rotors, Part 1: Determination of 1999 ASA 0 Permissible Residual Unbalance, Including Marine Applications S2.20 Estimating Air Blast Characteristics for Single Point Explosions in Air, with a Guide to Evaluation of 1983 ASA 0 Atmospheric Propagation and Effects ASA R(2001) S2.21 Method for Preparation of a Standard Material for Dynamic Mechanical Measurements R(2002) 1998 ASA S2.22 Resonance Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials 1998 ASA 0 R(2002) S2.23 Single Cantilever Beam Method for Measuring the Dynamic Mechanical Properties of Viscoelastic 1998 ASA 0 Materials R(2002) S2.24 Graphical Presentation of the Complex Modulus of Viscoelastic Materials 2001 ASA S2.25 Guide for the Measurement, Reporting, nad Evaluation, of Hull and Superstructure Vibration in Ships 2001 ASA S2.26 Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment 2001 ASA S2.27 Guidelines for the Measurement and Evaluation of Vibration of Ship Propulsion Machinery 2002 ASA S2.31 Methods for the Experimental Determination of Mechanical Mobility Part I: Basic Definitions and 1979 ASA 0 Transducers ASA R(2001) S2.32 Methods for the Experimental Determination of Mechanical Mobility. Part II: Measurements Using 1982 ASA 0 Single-Point Translational Excitation ASA R(2001) S2.34 Guide to the Experimental Determination of Rotational Mobility Properties and the Complete Mobility 1984 ASA 0 Matrix ASA R(2001) S2.38 Field Balancing Equipment - Description and Evaluation ASA R(2001) 1982 ASA S2.40 Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Measuring Vibration 1984 ASA 0 Severity ASA R(2001) S2.41 Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 Rev/s ASA 0 Measurement and Evaluation of Vibration Severity In Situ ASA R(2001) S2.42 Procedures for Balancing Flexible Rotors ASA R(2001) 1982 ASA S2.43 Criteria for Evaluating Flexible Rotor Balance ASA 54 R(2001) 1984 ASA S2.45 Electrodynamic Test Equipment for Generating Vibration - Methods of Describing Equipment 1983 ASA 0 Characteristics ASA R(2001) S2.46 Characteristics to be Specified for Seismic Transducers ASA R(2001) 1989 ASA S2.47 Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects 1990 ASA 0 on Buildings ASA R(2001) S2.48 Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics ASA 1993 ASA R(2001) S2.58 Auxiliary Tables for Vibration Generators - Methods of Describing Equipment Characteristics ASA ASA R(2001) S2.60 Balancing Machines - Enclosures and Other Safety Measures ASA R(2001) 1987 ASA S2.61 Guide to the Mechanical Mounting of Accelerometers ASA R(2001) 1989 ASA S3.1 Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms ASA ASA S3.2 Method for Measuring the Intelligibility of Speech over Communication Systems ASA ASA S3.4 Computation of Loudness of Noise, Procedure for ASA R(1997) 1980 ASA S3.5 Methods for Calculation of the Speech Intelligibility Index R(2002) 1997 ASA S3.6 Specification for Audiometers 1996 ASA S3.7 Method for Coupler Calibration of Earphones ASA R(1999) 1995 ASA S3.13 Mechanical Coupler for Measurement of Bone Vibrators ASA R(2002) 1987 ASA S3.14 Rating Noise with Respect to Speech Interference ASA R(1997) 1977 ASA S3.18 Mechanical Vibration and Shock Evaluation of Human Exposure to Whole-Body Vibration Part 1: General Requirements ISO : ASA 0
3 19759 S3.18 PART 4 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole Body Vibration - Part 4: 2003 ASA 0 Guidelines for the Evaluation of the Effects of Vibration and Rotational Motion on Passenger and Crew Comfort i S3.20 Bioacoustical Terminology ASA R(1999) 1995 ASA S3.21 Methods for Manual Pure-Tone Threshold Audiometry ASA 19 R(1997) 1978 ASA S3.22 Specification of Hearing Aid Characteristics 1996 ASA S3.25 Occluded Ear Simulator ASA R(1999) 1989 ASA S3.29 Guide to the Evaluation of Human Exposure to Vibration in Buildings ASA , Erratum ASA 0 R(2001) S3.32 Mechanical Vibration and Shock Affecting Man - Vocabulary ASA R(1999) 1982 ASA S3.34 Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand 1986 ASA 0 ASA R(1997) S3.35 Methods of Measurement of Performance Characteristics of Hearing Aids Under Simulated In-Situ 1985 ASA 0 Working Conditions ASA 59 R(1997) S3.36 Specifications for Manikin for Simulated In- Situ Airborne Acoustic Measurements ASA 58 R(2001) 1985 ASA S3.37 Preferred Earhook Nozzle Thread for Postauricular Hearing Aids ASA 69 R(2002) 1987 ASA S3.39 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic 1987 ASA 0 Immittance) ASA 71 R(2002) S3.40 Mechanical Vibration and Shock Hand-Arm Vibration Method for the Measurement and Evaluation of 2002 ASA 0 the Vibration Transmissibility of Gloves at the Palm of the Hand ISO 10819: S3.41 Audible Emergency Evacuation Signal ASA 96 R(2001) 1990 ASA S3.42 Testing Hearing Aids with a Broad-Band Noise Signal ASA 103 R(2002) 1992 ASA S3.44 Determination of Occupational Noise Exposure and Estimation of Noise-Induced Hearing Impairment 1996 ASA 0 R(2001) S3.45 Procedures for Testing Basic Vestibular Function 1999 ASA S3.46 Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids R(2002) 1998 ASA S12.1 Guidelines for Preparation of Standard Procedures to Determine the Noise Emission from Sources ASA 1983 ASA 0 49 R(2001) S12.2 Criteria for Evaluating Room Noise ASA ; Erratum R(1999) 1995 ASA S12.3 Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and 1985 ASA 0 Equipment ASA 57 R(2001) S12.4 (Withdrawn)Assessment of High-Energy Impulsive Sounds with Respect to Residential Communities 1986 ASA 0 ASA 63 R(1993) S12.5 Requirements for the Performance and Calibration of References Sound Sources ASA 87 R(1997) 1990 ASA S12.6 Methods for Measuring the Real-Ear Attenuation of Hearing Protectors R(2002) 1997 ASA S12.7 Methods for Measurement of Impulse Noise ASA 62 R(1998) 1986 ASA S12.8 Methods for Determining the Insertion Loss of Outdoor Noise Barriers ASA 73 R(2003) 1998 ASA S12.9 PART 4 Quantities and Procedures for Description and Measurement of Environmental Sound - Part 4: Noise 1996 ASA 0 Assessment and Prediction of Long-Term Community Response REPRINTED OCTOBER 1997 INCLUDING ERRATA R(2001) S12.9 PART 5 Quantities and Procedures for Description and Measurement of Environmental Sound - Part 5: Sound 1998 ASA 0 Level Descriptors for Determination of Compatible Land Use R(2003) S12.9 PT 1 Quantities and Procedures for Description and Measurement of Environmental Sound Part 1; Erratum 1988 ASA 0 ASA 76 R(2003) S12.9 PT 2 Quantities and Procedures for Description and Measurement of Environmental Sound Part 2: 1992 ASA 0 Measurement of Long-Term, Wide-Area Sound ASA 105 R(2003) S12.9 PT 3 Quantities and Procedures for Description and Measurement of Environmental Sound Part 3: Short- Term Measurements with an Observer Present ASA 109 R(2003) 1993 ASA 0
4 19790 S12.9 PT 6 Quantities and Procedures for Description and Measurement of Environmental Sound - Part 6: 2000 ASA 0 Methods for Estimation of Awakenings Associated with Aircraft Noise Events Heard in Homes S12.10 Acoustics - Measurement of airborne noise emitted by information technology and 2002 ASA 0 telecommunications equipment ISO 7779: S12.11 Method for the Measurement of Noise Emitted by Small Air-Moving Devices ASA 72 R(1997) 1987 ASA S12.12 Engineering Method for the Determination of Sound Power Levels of Noise Sources Using Sound 1992 ASA 0 Intensity ASA 104 R(2002) S12.13 (Obsolescent)Evaluating the Effectiveness of Hearing Conservation Programs Draft ASA ASA S12.13 TR Evaluating the Effectiveness of Hearing Conservation Programs through Audiometric Data Base 2002 ASA 0 Analysis S12.14 Methods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed 1992 ASA 0 at Fixed Locations Outdoors ASA 101 R(2002) S12.15 Acoutics - Portable Electric Power Tools, Stationary and Fixed Electric Power Tools, and Gardening 1992 ASA 0 Appliances - Measurement of Sound Emitted ASA 106 R(2002) S12.16 Guidelines for the Specification of Noise of New Machinery ASA 107 R(2002) 1992 ASA S12.17 Impulse Sound Propagation for Environmental Noise Assessment R(2001) 1996 ASA S12.18 Procedures for Outdoor Measurement of Sound Pressure Level ASA R(1999) 1994 ASA S12.19 Measurement of Occupational Noise Exposure R(2001) 1996 ASA S12.23 Method for the Designation of Sound Power Emitted by Machinery and Equipment ASA 83 R(2001) 1989 ASA S12.30 Guidelines for the Use of Sound Power Standards and for the Preparation of Noise Test Codes ASA ASA 0 R(2002) S12.31 (Withdrawn)Precision Methods for the Determination of Sound Power Levels of Broad-Band Noise 1990 ASA 0 Sources in Reverberation Rooms Replaced by S S12.32 (Withdrawn)Precision Methods for the Determination of Sound Power Levels of Discrete-Frequency 1990 ASA 0 and Narrow-Band Noise Sources in Reverberation Rooms Replaced by S S12.33 (Withdrawn)Engineering Methods for the Determination of Sound Power Levels of Noise Sources in a 1990 ASA 0 Special Reverberation Test Room Replaced by S12.52/1 and S12.52/ S12.34 (Withdrawn)Engineering Methods for the Determination of Sound Power Levels of Noise Sources for 1988 ASA 0 Essentially Free-Field Conditions over a Reflecting Plane Replaced by S S12.35 Precision Methods for the Determination of Sound Power Levels of Noise Sources in Anechoic and 1990 ASA 0 Hemi-Anechoic Rooms ASA 90 R(2001) S12.36 (Withdrawn)Survey Methods for the Determination of Sound Power Levels of Noise Sources Replaced 1990 ASA 0 by S S12.40 (Withdrawn)Sound Level Descriptors for Determination of Compatible Land Use ASA ASA S12.42 Microphone-in-Real-Ear and Acoustic Test Fixture Methods for the Measurement of Insertion Loss of 1995 ASA 0 Circumaural Hearing Protection Devices ASA ; Erratum R(1999) S12.43 Methods for Measurement of Sound Emitted by Machinery and Equipment at Workstations and other 1997 ASA 0 Specified Positions R(2002) S12.44 Methods for Calculation of Sound Emitted by Machinery and Equipment at Workstations and other 1997 ASA 0 Specified Positions from Sound Power Level R(2002) S12.50 Acoustics Determination of Sound Power Levels of Noise Sources Guidelines for the use of Basic 2002 ASA 0 Standards ISO 3740: S12.51 Acoustics Determination of Sound Power Levels of Noise Sources using Sound Pressure Precision 2002 ASA 0 Method for Reverberation Rooms Technical Corrigendum S12.53/1 Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, 1999 ASA 0 Movable Sources in Reverberant Fields - Part 1: Comparison Method for Hard-Walled Test Rooms ANSI S12.53/ S12.53/2 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 2: Methods for Special Reverberation Test Roo 1999 ASA 0
5 19818 S12.54 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure ASA 0 Engineering Method in an Essentially Free Field over a Reflecting Plane ANSI S ; ISO 3744: S12.56 Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Survey 1999 ASA 0 Method Using an Enveloping Measurement Surface over a Reflecting Plane ANSI S ; ISO 3746: S12.57 Acoustics Determination of Sound Power Levels of Noise Sources using Sound Pressure Comparison 2002 ASA 0 Method in Situ ISO 3747: S12.60 Acoustical Performance Criteria, Design Requirements, and Guidelines for Schools 2002 ASA S1.1 Acoustical Terminology 2013 ASA S1.4 Electroacoustics Sound Level Meters Part 1: Specifications 2014 ASA S1.11 Specification for Octave-Band and Fractional-Octave-Band Analog and Digital Filters 2004 ASA S1.14 Recommendations for Specifying and Testing the Susceptibility of Acoustical Instruments to Radiated 2013 ASA 0 Radio-Frequency Electromagnetic Fields, 25 MHz to 1 GHz S1.15 PART 1 Measurement Microphones - Part 1: Specifications for Laboratory Standard Microphones 2011 ASA S1.25 Specification for Personal Noise Dosimeters ASA ASA S1.26 Method for Calculation of the Absorption of Sound by the Atmosphere ASA ASA S1.26 Method for Calculation of the Absorption of Sound by the Atmosphere ASA ASA S1.6 Preferred Frequencies, Frequency Levels, and Band Numbers for Acoustical Measurements ASA ASA S1.8 Reference Quantities for Acoustical Levels ASA ASA S1.42 Design Response of Weighting Networks for Acoustical Measurements 2011 ASA S1.1 Acoustical Terminology 2004 ASA S2.2 Methods for the Calibration of Shock and Vibration Pickups 2011 ASA S2.4 Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration 2014 ASA 0 Measurements ASA S2.16 Vibratory Noise Measurements and Acceptance Criteria of Shipboard Equipment 2011 ASA S2.31 Methods for the Experimental Determination of Mechanical Mobility Part I: Basic Definitions and 2014 ASA 0 Transducers ASA S2.32 Methods for the Experimental Determination of Mechanical Mobility. Part II: Measurements Using 2014 ASA 0 Single-Point Translational Excitation ASA S2.34 Guide to the Experimental Determination of Rotational Mobility Properties and the Complete Mobility 2015 ASA 0 Matrix ASA S2.46 Characteristics to be Specified for Seismic Transducers ASA ASA S2.61 Guide to the Mechanical Mounting of Accelerometers ASA ASA S2.21 Method for Preparation of a Standard Material for Dynamic Mechanical Measurements 2012 ASA S2.22 Resonance Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials 2012 ASA S2.23 Single Cantilever Beam Method for Measuring the Dynamic Mechanical Properties of Viscoelastic 2012 ASA 0 Materials S2.24 Graphical Presentation of the Complex Modulus of Viscoelastic Materials 2011 ASA S3.7 Method for Coupler Calibration of Earphones ASA ASA S3.20 Bioacoustical Terminology ASA ASA S3.36 Specifications for Manikin for Simulated In- Situ Airborne Acoustic Measurements ASA ASA S3.41 Audible Emergency Evacuation Signal ASA ASA S3.41 Audible Emergency Evacuation Signal ASA ASA S3.42 Testing Hearing Aids with a Broad-Band Noise Signal ASA 103 R(2002) 2012 ASA S3.44 Determination of Occupational Noise Exposure and Estimation of Noise-Induced Hearing Impairment 2006 ASA S3.46 Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids 2014 ASA 0
6 19854 S3.5 Methods for Calculation of the Speech Intelligibility Index 2012 ASA S3.13 Mechanical Coupler for Measurement of Bone Vibrators ASA ASA S3.39 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic 2012 ASA 0 Immittance) ASA S12.1 Guidelines for Preparation of Standard Procedures to Determine the Noise Emission from Sources ASA 2011 ASA S12.3 Statistical Methods for Determining and Verifying Stated Noise Emission Values of Machinery and 2011 ASA 0 Equipment ASA S12.7 Methods for Measurement of Impulse Noise ASA ASA S12.8 Methods for Determining the Insertion Loss of Outdoor Noise Barriers ASA ASA S12.9 PT 1 Quantities and Procedures for Description and Measurement of Environmental Sound Part 1; Erratum 2013 ASA 0 ASA S12.9 PT 2 Quantities and Procedures for Description and Measurement of Environmental Sound Part 2: 2013 ASA 0 Measurement of Long-Term, Wide-Area Sound ASA S12.9 PT 3 Quantities and Procedures for Description and Measurement of Environmental Sound Part 3: Short ASA 0 Term Measurements with an Observer Present ASA S12.16 Guidelines for the Specification of Noise of New Machinery ASA 107 R(2002) 2013 ASA S12.17 Impulse Sound Propagation for Environmental Noise Assessment 2011 ASA S12.18 Procedures for Outdoor Measurement of Sound Pressure Level ASA ASA S12.19 Measurement of Occupational Noise Exposure 2011 ASA S12.23 Method for the Designation of Sound Power Emitted by Machinery and Equipment ASA ASA S12.12 Engineering Method for the Determination of Sound Power Levels of Noise Sources Using Sound 2012 ASA 0 Intensity ASA S12.14 Methods for the Field Measurement of the Sound Output of Audible Public Warning Devices Installed 2012 ASA 0 at Fixed Locations Outdoors ASA S12.43 Methods for Measurement of Sound Emitted by Machinery and Equipment at Workstations and other 2012 ASA 0 Specified Positions S12.44 Methods for Calculation of Sound Emitted by Machinery and Equipment at Workstations and other Specified Positions from Sound Power Level 2012 ASA 0
LIST OF PUBLISHED STANDARDS
Report : 08-06- Page o : Of 9 LST OF PUBLSHED STDRDS Total Count: 9 umber SS umber nt pproved mendment SBS/TC 076 SS 40-:997/SO 40-:997 coustics - Measurement of sound insulation in buildings and of building
More informationTurbines and turbine sets Measurement of emitted airborne noise Engineering/survey method
INTERNATIONAL STANDARD ISO 10494 Second edition 2018-04 Turbines and turbine sets Measurement of emitted airborne noise Engineering/survey method Turbines et groupes de turbines Mesurage du bruit aérien
More informationClassification of services in Acoustics, Ultrasound and Vibration
Classification of services in Acoustics, Ultrasound and Vibration Last update: December 2017 1 Metrology Area: Acoustics, Ultrasound and Vibration Branch: Sound in Air 1. Measurement microphones 1.1 Pressure
More informationSound Engineering Test and Analysis
Sound Engineering Test and Analysis Product sound and sound quality are key aspects of product perception. How a product sounds plays a critical role in conveying the right message about its functionality,
More informationPart 2: Methods for special reverberation test rooms
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3743-2 Second edition 2018-02 Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11201 Second edition 2010-05-15 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions
More informationEngineering Noise Control
Engineering Noise Control Theory and practice Second edition David A. Bies and Colin H. Hansen Department of Mechanical Engineering University of Adelaide South Australia E & FN SPON An Imprint of Chapman
More information1 Wind Turbine Acoustics. Wind turbines generate sound by both mechanical and aerodynamic
Wind Turbine Acoustics 1 1 Wind Turbine Acoustics Wind turbines generate sound by both mechanical and aerodynamic sources. Sound remains an important criterion used in the siting of wind farms. Sound emission
More informationISO INTERNATIONAL STANDARD. Test code for machine tools Part 5: Determination of the noise emission
INTERNATIONAL STANDARD ISO 230-5 First edition 2000-08-01 Test code for machine tools Part 5: Determination of the noise emission Code d'essai des machines-outils Partie 5: Détermination de l'émission
More informationSound power level measurement in diffuse field for not movable sources or emitting prominent discrete tones
CFA 2018 - Le Havre Sound power level measurement in diffuse field for not movable sources or emitting prominent discrete tones F. Bessaca et P. Cellardb a CETIAT, Domaine Scientifique de la Doua, 25,
More informationISO 3741 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3741 Fourth edition 2010-10-01 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation
More informationTHE ACOUSTIC IMPEDANCE MEASUREMNET SYSTEM USING TWO MICROPHONES
P-7 THE ACOUSTIC IMPEDANCE MEASUREMNET SYSTEM USING TWO MICROPHONES RYU, YUNSEON BRUEL & KJAER SOUND & VIBRATION MEASUREMENT A/S SKODSBORGVEJ 307 NAERUM 2850 DENMARK TEL : +45 77 41 23 87 FAX : +45 77
More informationECMA Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Part 1: Airborne noise measurement
ECMA-275-1 4 th Edition / December 2017 Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Part 1: Airborne noise measurement Reference number ECMA-123:2009
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-10 First edition 2001-05 Power transformers Part 10: Determination of sound levels Transformateurs de puissance Partie 10: Détermination des niveaux de bruit IEC 2001 Copyright
More informationExposure Controls for physical Agents
Exposure Controls for physical Agents Nature of physical agents Physical agents usually involve the transfer of energy from a source to a human receptor The energy can be in various forms: Mechanical:
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 140-6 Second edition 1998-08-15 Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of
More informationFundamentals of noise and Vibration analysis for engineers
Fundamentals of noise and Vibration analysis for engineers M.P.NORTON Department of Mechanical Engineering, University of Western Australia CAMBRIDGE UNIVERSITY PRESS Preface xii Acknowledgements xv Introductory
More informationNoise and Vibration of Electrical Machines
Noise and Vibration of Electrical Machines P. L. TIMÄR A. FAZEKAS J. KISS A. MIKLOS S. J. YANG Edited by P. L. Timär ш Akademiai Kiadö, Budapest 1989 CONTENTS Foreword xiii List of symbols xiv Introduction
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11546-2 First edition 1995-12-15 Acoustics - Determination of Sound insulation performances of enclosures - Part 2: Measurements in sifu (for acceptance and verification purposes)
More informationMethod of Testing of Sound Absorption Properties of Materials Intended for Ultrasonic Noise Protection
ARCHIVES OF ACOUSTICS Vol. 38, No. 2, pp. 191 195 (2013) Copyright c 2013 by PAN IPPT DOI: 10.2478/aoa-2013-0022 Method of Testing of Sound Absorption Properties of Materials Intended for Ultrasonic Noise
More informationISO 5136 INTERNATIONAL STANDARD. Acoustics Determination of sound power radiated into a duct by fans and other air-moving devices In-duct method
INTERNATIONAL STANDARD ISO 5136 Second edition 2003-04-01 Acoustics Determination of sound power radiated into a duct by fans and other air-moving devices In-duct method Acoustique Détermination de la
More informationONBOARD SHIP NOISE ANALYSIS
Guidance Notes on Ship Noise Analysis GUIDANCE NOTES ON ONBOARD SHIP NOISE ANALYSIS FEBRUARY 2018 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 2018 American
More informationEUROPEAN pr ETS TELECOMMUNICATION June 1996 STANDARD
DRAFT EUROPEAN pr ETS 300 753 TELECOMMUNICATION June 1996 STANDARD Source: ETSI-TC-EE Reference: DE/EE-01023 ICS: 33.020 Key words: acoustic, emission, environment, noise Equipment Engineering (EE); Acoustic
More informationAcoustics - Determination of sound power levels of noise sources - Precision methods for anechoic and semi-anechoic rooms
INTERNATIONAL STANDARD IS0 37451977 (El.AMENDMENT SLIP Published 1982-03-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION- MEXAYHAPO~~HM opraiik3a~~fl no CTAH&~PTMJAU~~~ ORGANISATION INTERNATIONALE DE
More informationMeasurement of Acoustic Properties of light weight concrete SL-Deck
DELTA Test Report TEST Reg. no. 100 Measurement of Acoustic Properties of light weight concrete SL-Deck Performed for Abeo A/S Project no.: I100486 Page 1 of 25 30 June 2014 DELTA Venlighedsvej 4 2970
More informationAcoustics Attenuation of sound during propagation outdoors Part 2: General method of calculation
ISO 9613-2 INTERNATIONAL STANDARD First edition 1996-12-15 Acoustics Attenuation of sound during propagation outdoors Part 2: General method of calculation Acoustique Attenuation du son lors de sa propagation
More informationEvaluation of standards for transmission loss tests
Evaluation of standards for transmission loss tests M. Cassidy, R. K Cooper, R. Gault and J. Wang Queen s University Belfast, School of Mechanical and Aerospace Engineering, Ashby Building, Stranmillis
More informationACOUSTICS 1.01 Pantone 144 U & Pantone 5405 U
ACOUSTICS 1.01 CONTENT 1. INTRODUCTION 3 2. WHAT IS SOUND? 4 2.1 Sound 4 2.2 Sound Pressure 5 2.3 The Decibel Scale 5 2.4 Sound Pressure Increase For Muliple Sound Sources 6 2.5 Frequency 7 2.6 Wavelength
More informationISO 354 INTERNATIONAL STANDARD. Acoustics Measurement of sound absorption in a reverberation room
INTERNATIONAL STANDARD ISO 354 Second edition 2003-05-15 Acoustics Measurement of sound absorption in a reverberation room Acoustique Mesurage de l'absorption acoustique en salle réverbérante Reference
More informationSound radiation and transmission. Professor Phil Joseph. Departamento de Engenharia Mecânica
Sound radiation and transmission Professor Phil Joseph Departamento de Engenharia Mecânica SOUND RADIATION BY A PISTON The piston generates plane waves in the tube with particle velocity equal to its own.
More informationQUANTIFYING ACOUSTIC SOURCES THROUGH SOUND POWER MEASUREMENTS
SENSORS FOR RESEARCH & DEVELOPMENT WHITE PAPER #31 QUANTIFYING ACOUSTIC SOURCES THROUGH SOUND POWER MEASUREMENTS Written By Andrew R. Barnard, Ph.D., INCE Bd. Cert. Research Associate, Applied Research
More informationAnswer - SAQ 1. The intensity, I, is given by: Back
Answer - SAQ 1 The intensity, I, is given by: Noise Control. Edited by Shahram Taherzadeh. 2014 The Open University. Published 2014 by John Wiley & Sons Ltd. 142 Answer - SAQ 2 It shows that the human
More informationUncertainties associated with the use of a sound level meter
NPL REPORT DQL-AC 002 Uncertainties associated with the use of a sound level meter Richard Payne April 2004 April 2004 ABSTRACT Uncertainties associated with the use of a sound level meter Richard Payne
More informationIntroduction to Acoustics Exercises
. 361-1-3291 Introduction to Acoustics Exercises 1 Fundamentals of acoustics 1. Show the effect of temperature on acoustic pressure. Hint: use the equation of state and the equation of state at equilibrium.
More informationTest Report. RI Acoustic Lab. Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier. 20 Feb. 07
Test Report RI Acoustic Lab Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier 20 Feb. 07 Title Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier
More informationProduct Data. Brüel & Kjær B. Sound Power Source Type Introduction
Product Data Sound Power Source Type 425 USES: Determination of sound power output of equipment by the Substitution Method Determination, by the Juxtaposition Method, of sound power output of equipment
More informationBasic Principle of Strain Gauge Accelerometer. Description of Strain Gauge Accelerometer
Basic Principle of Strain Gauge Accelerometer When a cantilever beam attached with a mass at its free end is subjected to vibration, vibrational displacement of the mass takes place. Depending on the displacement
More informationAcoustic Quantities. LMS Test.Lab. Rev 12A
Acoustic Quantities LMS Test.Lab Rev 12A Copyright LMS International 2012 Table of Contents Chapter 1 Acoustic quantities... 5 Section 1.1 Sound power (P)... 5 Section 1.2 Sound pressure... 5 Section
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 1.1 DESIGN OF TERMINATING
More informationDETERMINATION OF AIRBORNE SOUND POWER LEVELS EMITTED BY GEAR UNITS
DETERMINATION OF AIRBORNE SOUND POWER LEVELS EMITTED BY GEAR UNITS CONTENTS... PAGE 0 SCOPE... 4 1 REFERENCE... 4. 2. TERMS. DEFINITIONS AND UNITS... 4 3. INSTRUMENTATION... 6 4. TEST REQUIREMENTS... 6
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11904-2 First edition 2004-11-01 Acoustics Determination of sound immission from sound sources placed close to the ear Part 2: Technique using a manikin Acoustique Détermination
More informationINTRODUCTION. Smooth Passage for an Artificial Satellite - Combustion Test Title - Necessity of Next Term Solid Rocket. Designing the Launch Complex
R E S E A R C H INTRODUCTION Smooth Passage for an Artificial Satellite - Combustion Test Title - Necessity of Next Term Solid Rocket In September 2006, the "M-V (Mu (µ)-five)," a rocket developed by the
More informationODEON APPLICATION NOTE Calibration of Impulse Response Measurements
ODEON APPLICATION NOTE Calibration of Impulse Response Measurements Part 2 Free Field Method GK, CLC - May 2015 Scope In this application note we explain how to use the Free-field calibration tool in ODEON
More informationComparison of Noise Test Codes when Applied to air Compressors
VDI-Berichte Nr. 1932, 2006 A 6 83 Comparison of Noise Test Codes when Applied to air Compressors Michael J. Lucas, INCE Bd. Cert., Ingersoll-Rand Company, Davidson/NC INTRODUCTION Beginning January 2004,
More informationStandard Terminology Relating to Environmental Acoustics 1
Designation: C 634 00 An American National Standard Standard Terminology Relating to Environmental Acoustics 1 This standard is issued under the fixed designation C 634; the number immediately following
More informationLaser scanning vibrometry measurements on a light weight building element
Laser scanning vibrometry measurements on a light weight building element N.B. Roozen, M. Rychtáriková, Katholieke Universiteit Leuven, Laboratory for Acoustics and Thermal Physics (ATF), Department of
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 213 http://acousticalsociety.org/ ICA 213 Montreal Montreal, Canada 2-7 June 213 Engineering Acoustics Session 4pEAa: Sound Field Control in the Ear Canal
More informationNoise from Oil & Gas Facilities Acoustics 101 and Best Practices for Noise Control. Rob Stevens, HGC Engineering
Noise from Oil & Gas Facilities Acoustics 101 and Best Practices for Noise Control Rob Stevens, HGC Engineering Noise From Oil & Gas Facilities Acoustics 101 and Best Practices for Noise Control Rob Stevens
More informationVibration Control Prof. Dr. S. P. Harsha Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee
Vibration Control Prof. Dr. S. P. Harsha Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Module - 3 Vibration Isolation Lecture - 1 Vibration Isolation 1 This
More informationFESI DOCUMENT A5 Acoustics in rooms
FESI DOCUMENT A5 Acoustics in rooms FileName: A5 Acoustics in rooms - English version.pdf o o Abstract: The first theory developed was Sabine\'s formula (1902) and it is the basis of the so-called \"classic
More informationDEA 3500: HUMAN FACTORS: THE AMBIENT ENVIRONMENT (Fall 2017)
DEA 3500: HUMAN FACTORS: THE AMBIENT ENVIRONMENT (Fall 2017) NAME: HOMEWORK 3 Due Date: November 21st in class (NOTE: You will need to consult the readings as well as your class notes to complete the homework)
More informationMethod of Measuring Machinery Sound Within an Equipment Space
ANSI/AHRI Standard 575 (Formerly ARI Standard 575) 2008 Standard for Method of Measuring Machinery Sound Within an Equipment Space Price $15.00 (M) $30.00 (NM) Printed in U.S.A. 8Copyright 1994, by Air-Conditioning
More informationAPPENDIX B. Noise Primer
APPENDIX B Noise Primer NOISE PRIMER TABLE OF CONTENTS 1. INTRODUCTION...1 2. BASIC SOUND PRINCIPLES...1 2.1. SOUND AS A WAVE...1 2.2. SOUND PRESSURE LEVEL...2 2.2.1. Decibel Math...4 2.2.2. Descriptive
More informationMeasurement Techniques for Engineers. Motion and Vibration Measurement
Measurement Techniques for Engineers Motion and Vibration Measurement Introduction Quantities that may need to be measured are velocity, acceleration and vibration amplitude Quantities useful in predicting
More informationAcoustic design of lightweight cabin walls for cruise ships
Acoustic design of lightweight cabin walls for cruise ships A. Treviso 1, M. G. Smith 1 1 ISVR Consulting, University of Southampton University Road, SO17 BJ1, Southampton, United Kingdom e-mail: mgs@isvr.soton.ac.uk
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 7.2 LABORATORY MEASUREMENT
More informationEuropean Standard Environmental Engineering (EE); Acoustic noise emitted by telecommunications equipment
EN 300 753 V1.3.1 (2012-01) European Standard Environmental Engineering (EE); Acoustic noise emitted by telecommunications equipment 2 EN 300 753 V1.3.1 (2012-01) Reference REN/EE-00025 Keywords acoustic,
More informationStandard ECMA-108 3rd Edition - December Measurement of High-frequency Noise emitted by Information Technology and Telecommunications Equipment
Standard ECMA-108 3rd Edition - December 1996 Standardizing Information and Communication Systems Measurement of High-frequency Noise emitted by Information Technology and Telecommunications Equipment
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10848-3 First edition 2006-04-01 Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3: Application to light
More informationFundamentals of silencing and their practical application in screw compressor plants
Fundamentals of silencing and their practical application in screw compressor plants Dr.-Ing. Johann Lenz Theory of sound Air or fluid-borne sound is generally considered as weak pressure fluctuations.
More informationDELTA Test Report. DANAK TEST Reg. no Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time
We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 100 Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time Client: Kvadrat Soft Cells A/S Page 1
More informationACOUSTIC PROPERTIES OF INDUSTRIAL MACHINERY. design techniques to minimize gear drive radiated noise
ACOUSTIC PROPERTIES OF INDUSTRIAL MACHINERY design techniques to minimize gear drive radiated noise This white paper is to inform you generally on the topic of noise as related to Philadelphia Gear Corporation
More informationNoise in enclosed spaces. Phil Joseph
Noise in enclosed spaces Phil Joseph MODES OF A CLOSED PIPE A 1 A x = 0 x = L Consider a pipe with a rigid termination at x = 0 and x = L. The particle velocity must be zero at both ends. Acoustic resonances
More informationIEEE PError! Unknown document property name./d10.0, November, Error! Unknown document property name.
IEEE PError! Unknown document property name./d10.0, November, Error! Unknown document property name. IEEE P1652 /D10.0 Draft Standard for Translating Head and Torso Simulator Measurements from Eardrum
More informationAssessment & Specifications for Noise Controls
Project 772600 Rev 1 Cargill North Vancouver Grain Terminal Assessment & Specifications for Noise Controls TABLE OF CONTENTS 1. INTRODUCTION...1 1.1 Background...1 1.2 Site Description...1 2. SOUND LEVEL
More informationSound Rating of Ducted Air Moving and Conditioning Equipment
AHRI Standard 260 (I-P) 2017 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment IMPORTANT SAFETY DISCLAIMER AHRI does not set safety standards and does not certify or guarantee the
More informationCHARACTERISATION OF VIBRATORY, PULSATION AND NOISE SOURCES
CHARACTERISATION OF VIBRATORY, PULSATION AND NOISE SOURCES Goran Pavić INSA Lyon, France CAV April 2017 0/20 scope Objectives: predict the transmission source surroundings allow meaningful specs formulation
More informationON SOUND POWER MEASUREMENT OF THE ENGINE IN ANECHOIC ROOM WITH IMPERFECTIONS
ON SOUND POWER MEASUREMENT OF THE ENGINE IN ANECHOIC ROOM WITH IMPERFECTIONS Mehdi Mehrgou 1, Ola Jönsson 2, and Leping Feng 3 1 AVL List Gmbh., Hans-list-platz 1,8020, Graz, Austria 2 Scania CV AB, Södertälje,
More informationAvailable online at ScienceDirect. Energy Procedia 78 (2015 ) th International Building Physics Conference, IBPC 2015
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 78 (2015 ) 146 151 6th International Building Physics Conference, IBPC 2015 A combined experimental and analytical approach for the
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14257 First edition 2001-10-15 Acoustics Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
More information9. TRANSMISSION OF SOUND THROUGH STRUCTURES
NOISE CONTROL Transmission 9.1 9. TRANSMISSION OF SOUND THROUGH STRUCTURES 9.1 Basic Definitions A typical noise control application involves a combination of absorption of sound and transmission of sound
More informationMeasurement of sound absorption coefficient for Fraster felt SpaceCover
DELTA Test Report TEST Reg. no. 100 Measurement of sound absorption coefficient for Fraster felt SpaceCover Performed for Fraster ApS Project no.: I100645 Page 1 of 9 27 November 2014 DELTA Venlighedsvej
More informationRoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18437-1 First edition 2012-08-15 Mechanical vibration and shock Characterization of the dynamic mechanical properties of visco-elastic materials Part 1: Principles and guidelines
More informationStandard Test Method for Field Measurement of Sound Power Level by the Two- Surface Method 1
Designation: E 1124 97 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr., West Conshohocken, PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Test Method
More informationTime-Series Analysis for Ear-Related and Psychoacoustic Metrics
Time-Series Analysis for Ear-Related and Psychoacoustic Metrics V. Mellert, H. Remmers, R. Weber, B. Schulte-Fortkamp how to analyse p(t) to obtain an earrelated parameter? general remarks on acoustical
More informationLast time: small acoustics
Last time: small acoustics Voice, many instruments, modeled by tubes Traveling waves in both directions yield standing waves Standing waves correspond to resonances Variations from the idealization give
More informationNew techniques in computer aided noise abatement for workplaces next to machinery Wolfgang Probst
New techniques in computer aided noise abatement for workplaces next to machinery Wolfgang Probst DataKustik GmbH, 86926 Greifenberg, E-Mail:wolfgang.probst@datakustik.de Introduction To protect workers
More informationPRODUCT DATA. Sound Intensity Calibrator Type 3541-A. Uses and Features
PRODUCT DATA Sound Intensity Calibrator Type 3541-A Type 3541-A enables calibration of sound intensity measuring instruments by using a coupler designed especially for sound intensity calibrations. Intensity-probe
More informationA simple formula for insertion loss prediction of large acoustical enclosures using statistical energy analysis method
csnak, 014 Int. J. Nav. Archit. Ocean Eng. (014) 6:894~903 http://dx.doi.org/10.478/ijnaoe-013-00 pissn: 09-678, eissn: 09-6790 A simple formula for insertion loss prediction of large acoustical enclosures
More informationinter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering August 2000, Nice, FRANCE
Copyright SFA - InterNoise 2000 1 inter.noise 2000 The 29th International Congress and Exhibition on Noise Control Engineering 27-30 August 2000, Nice, FRANCE I-INCE Classification: 6.0 PREDICTION OF NOISE
More informationFDTD analysis on the sound insulation performance of wall system with narrow gaps
FDTD analysis on the sound insulation performance of wall system with narrow gaps Takumi Asakura a Shinichi Sakamoto b Institute of Industrial Science, The University of Tokyo. Komaba 4-6-, Meguro-ku,
More informationCHAPTER 5 SOUND LEVEL MEASUREMENT ON POWER TRANSFORMERS
CHAPTER 5 SOUND LEVEL MEASUREMENT ON POWER TRANSFORMERS 5.1 Introduction Sound pressure level measurements have been developed to quantify pressure variations in air that a human ear can detect. The perceived
More informationPRACTICE NO. PD-ED-1259 PREFERRED May 1996 RELIABILITY PAGE 1 OF 6 PRACTICES ACOUSTIC NOISE REQUIREMENT
PREFERRED May 1996 RELIABILITY PAGE 1 OF 6 PRACTICES Practice: Impose an acoustic noise requirement on spacecraft hardware design to ensure the structural integrity of the vehicle and its components in
More informationAvailable online at ScienceDirect. Energy Procedia 78 (2015 ) th International Building Physics Conference, IBPC 2015
Available online at www.sciencedirect.com ScienceDirect Energy Procedia 78 (2015 ) 128 133 6th International Building Physics Conference, IBPC 2015 Sound insulation of building elements at low frequency:
More informationDEA 350: HUMAN FACTORS: THE AMBIENT ENVIRONMENT (Spring 2008)
DEA 350: HUMAN FACTORS: THE AMBIENT ENVIRONMENT (Spring 2008) NAME: HOMEWORK II Due Date: 24 th April in class (NOTE: You will need to consult the readings as well as your class notes to complete the homework.
More informationApplication of Binaural Transfer Path Analysis to Sound Quality Tasks
Application of Binaural Transfer Path Analysis to Sound Quality Tasks Dr.-Ing. Klaus Genuit HEAD acoustics GmbH 1. INTRODUCTION The Binaural Transfer Path Analysis was developed in order to predict the
More informationAcoustics-An An Overview. Lecture 1. Vibro-Acoustics. What? Why? How? Lecture 1
Vibro-Acoustics Acoustics-An An Overview 1 Vibro-Acoustics What? Why? How? 2 Linear Non-Linear Force Motion Arbitrary motion Harmonic Motion Mechanical Vibrations Sound (Acoustics) 3 Our heart beat, our
More informationREPORT ON THE DETERMINATION OF SOUND ABSORPTION COEFFICIENTS OF WOVEN IMAGE ECHO PANEL 24MM TESTED WITH NO AIR GAP MEASURED IN A REVERBERATION ROOM.
RMIT University Building 1 Level 1 Room 1 124 La Trobe Street Melbourne VIC 3000 Australia GPO Box 2476V Melbourne VIC 3001 Australia Tel. +61 3 9925 2000 Fax +61 3 9925 2000 www.rmit.edu.au REPORT ON
More informationDELTA Test Report. Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object. Performed for Flex Acoustics
DELTA Test Report TEST Reg. no. 100 Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object Performed for Flex Acoustics Project no.: T202611 Page 1 of 7 21 January 2013 DELTA Venlighedsvej
More informationWhat s that Noise? Duct System Design Guide. Visit $69.00 value!
Design Advisory #8: CAS-DA8-004 What s that Noise? It happens all of us. You re sitting in a public facility such as a restaurant when suddenly the air conditioning kicks on with a vengeance and the roar
More informationLesson 13. Basic Concepts in Architectural Acoustics INTRODUCTION
Lesson 13 Basic Concepts in Architectural Acoustics 13.1 Introduction. 13.2 The nature of sound. 13.3 Properties of sound. 13.4 Propagation of sound. 13.5 Sound power and sound intensity. 13.6 Effect of
More informationSound-Absorbing and Insulating Enclosures for Ultrasonic Range
ARCHIVES OF ACOUSTICS Arch. Acoust., 35, 2, 157 164 (2010) DOI: 10.2478/v10168-010-0014-4 Sound-Absorbing and Insulating Enclosures for Ultrasonic Range Andrzej DOBRUCKI, Bronisław ŻÓŁTOGÓRSKI, Piotr PRUCHNICKI,
More information329. Vibrodiagnostics and Dynamic Behaviour of Machinery in Small Hydroelectric Power Plants*
39. Vibrodiagnostics and Dynamic Behaviour of Machinery in Small Hydroelectric Power Plants* V. Volkovas Kaunas University of Technology, Kęstučio str. 7b, LT-4431 Kaunas, Lithuania E-mail: tsdi@ktu.lt
More informationAppendix D: Acoustic and Explosive Concepts
Appendix D: Acoustic and Explosive Concepts Draft Environmental Impact Statement/Overseas Environmental Impact Statement Hawaii-Southern California Training and Testing TABLE OF CONTENTS APPENDIX D ACOUSTIC
More informationLesson Propagation of sound Sound fields Spherical, cylindrical and perpendicular wave fronts.
Lesson 13 Basic Concepts in Architectural Acoustics 13.1 Introduction. 13.2 The nature of sound. 13.2.1. Sound waves. 13.2.2. Frequency range of sound. 13.2.3. The audible range of sound. 13.3 Properties
More informationProduction Testing of Noise from Business Machines
BO 0130-11 Production Testing of Noise from Business Machines by Roger Upton, B.Sc. Introduction The introduction of various national which follow a published national or This application note describes
More informationPRELIMINARY MODELLING OF A MARINE PROPULSION SYSTEM
PRELIMINARY MODELLING OF A MARINE PROPULSION SYSTEM Andrew Youssef 1 Andrew Guzzomi 2, Jie Pan 3 and Paul Dylejko 4 1-3 School of Mechanical and Chemical Engineering UWA Australia, Perth WA 6009, Australia
More informationEXPERIMENTAL STUDIES OF THE INFLUENCE OF HUMAN STANDING POSITIONS ON THE FEET-TO-HEAD TRANSMISSION OF VIBRATIONS
JOURNAL OF THEORETICAL AND APPLIED MECHANICS 52, 4, pp. 1107-1114, Warsaw 2014 EXPERIMENTAL STUDIES OF THE INFLUENCE OF HUMAN STANDING POSITIONS ON THE FEET-TO-HEAD TRANSMISSION OF VIBRATIONS Marek A.
More informationISO INTERNATIONAL STANDARD. Acoustics Acoustic insulation for pipes, valves and flanges
INTERNATIONAL STANDARD ISO 15665 First edition 2003-08-15 Acoustics Acoustic insulation for pipes, valves and flanges Acoustique Isolation acoustique des tuyaux, clapets et brides Reference number ISO
More information