MECHANICS OF COMPOSITE STRUCTURES

Size: px
Start display at page:

Download "MECHANICS OF COMPOSITE STRUCTURES"

Transcription

1 MECHANICS OF COMPOSITE STRUCTURES LÁSZLÓ P. KOLLÁR Budapest University of Technology and Economics GEORGE S. SPRINGER Stanford University

2 PUBLISHED BY THE PRESS SYNDICATE OF THE UNIVERSITY OF CAMBRIDGE The Pitt Building, Trumpington Street, Cambridge, United Kingdom CAMBRIDGE UNIVERSITY PRESS The Edinburgh Building, Cambridge CB2 2RU, UK 40 West 20th Street, New York, NY , USA 477 Williamstown Road, Port Melbourne, VIC 3207, Australia Ruiz de Alarcón 13, Madrid, Spain Dock House, The Waterfront, Cape Town 8001, South Africa C Cambridge University Press 2003 This book is in copyright. Subject to statutory exception and to the provisions of relevant collective licensing agreements, no reproduction of any part may take place without the written permission of Cambridge University Press. First published 2003 Printed in the United States of America Typefaces Times Ten 10/13.5 pt. and Helvetica Neue Condensed System LATEX2ε [TB] A catalog record for this book is available from the British Library. Library of Congress Cataloging in Publication Data Kollar, L. Peter (Laszlo Peter), 1926 Mechanics of composite structures / László P.Kollár, George S. Springer. p. cm. Includes bibliographical references and index. ISBN Composite materials Mechanical properties. I. Springer, George S. II. Title. TA418.9.C6 K dc ISBN hardback

3 Contents Preface List of Symbols page xi xiii 1 Introduction 1 2 Displacements, Strains, and Stresses Strain Displacement Relations Equilibrium Equations Stress-Strain Relationships Generally Anisotropic Material Monoclinic Material Orthotropic Material Transversely Isotropic Material Isotropic Material Plane Strain Condition Free End Generally Anisotropic Material Free End Monoclinic Material Free End Orthotropic, Transversely Isotropic, or Isotropic Material Built-In Ends Generally Anisotropic Material Built-In Ends Monoclinic Material Built-In Ends Orthotropic, Transversely Isotropic, or Isotropic Material Plane-Stress Condition Hygrothermal Strains and Stresses Plane-Strain Condition Plane-Stress Condition Boundary Conditions Continuity Conditions Stress and Strain Transformations Stress Transformation Strain Transformation Transformation of the Stiffness and Compliance Matrices 53 v

4 vi CONTENTS 2.10 Strain Energy The Ritz Method Summary Note on the Compliance and Stiffness Matrices 56 3 Laminated Composites Laminate Code Stiffness Matrices of Thin Laminates The Significance of the [A], [B], and [D] Stiffness Matrices Stiffness Matrices for Selected Laminates 74 4 Thin Plates Governing Equations Boundary Conditions Strain Energy Deflection of Rectangular Plates Pure Bending and In-Plane Loads Long Plates Simply Supported Plates Symmetrical Layup Plates with Built-In Edges Orthotropic and Symmetrical Layup Buckling of Rectangular Plates Simply Supported Plates Symmetrical Layup Plates with Built-In and Simply Supported Edges Orthotropic and Symmetrical Layup Plates with One Free Edge Orthotropic and Symmetrical Layup Plates with Rotationally Restrained Edges Orthotropic and Symmetrical Layup Long Plates Free Vibration of Rectangular Plates Long Plates Simply Supported Plates Symmetrical Layup Plates with Built-In and Simply Supported Edges Orthotropic and Symmetrical Layup Hygrothermal Effects Change in Thickness Due to Hygrothermal Effects Plates with a Circular or an Elliptical Hole Interlaminar Stresses Sandwich Plates Governing Equations Boundary Conditions Strain Energy Stiffness Matrices of Sandwich Plates Deflection of Rectangular Sandwich Plates Long Plates Simply Supported Sandwich Plates Orthotropic and Symmetrical Layup 182

5 CONTENTS vii 5.3 Buckling of Rectangular Sandwich Plates Long Plates Simply Supported Plates Orthotropic and Symmetrical Layup Face Wrinkling Free Vibration of Rectangular Sandwich Plates Long Plates Simply Supported Plates Orthotropic and Symmetrical Layup Beams Governing Equations Boundary Conditions Stiffness Matrix Compliance Matrix Replacement Stiffnesses Rectangular, Solid Beams Subjected to Axial Load and Bending Displacements Symmetrical Layup Displacements Unsymmetrical Layup Stresses and Strains Thin-Walled, Open-Section Orthotropic or Symmetrical Cross-Section Beams Subjected to Axial Load and Bending Displacements of T-Beams Displacements of L-Beams Displacements of Arbitrary Cross-Section Beams Stresses and Strains Thin-Walled, Closed-Section Orthotropic Beams Subjected to Axial Load and Bending Torsion of Thin-Walled Beams Thin Rectangular Cross Section Open-Section Orthotropic Beams Closed-Section Orthotropic Beams Single Cell Closed-Section Orthotropic Beams Multicell Restrained Warping Open-Section Orthotropic Beams Restrained Warping Closed-Section Orthotropic Beams Thin-Walled Beams with Arbitrary Layup Subjected to Axial Load, Bending, and Torsion Displacements of Open- and Closed-Section Beams Stresses and Strains in Open- and Closed-Section Beams Centroid Restrained Warping Transversely Loaded Thin-Walled Beams Beams with Orthotropic Layup or with Symmetrical Cross Section Beams with Arbitrary Layup Shear Center Stiffened Thin-Walled Beams 288

6 viii CONTENTS 6.9 Buckling of Beams Beams Subjected to Axial Load (Flexural Torsional Buckling) Lateral Torsional Buckling of Orthotropic Beams with Symmetrical Cross Section Local Buckling Free Vibration of Beams (Flexural Torsional Vibration) Doubly Symmetrical Cross Sections Beams with Symmetrical Cross Sections Beams with Unsymmetrical Cross Sections Summary Beams with Shear Deformation Governing Equations Strain Displacement Relationships Force Strain Relationships Equilibrium Equations Summary of Equations Boundary Conditions Stiffnesses and Compliances of Beams Shear Stiffnesses and Compliances of Thin-Walled Open-Section Beams Shear Stiffnesses and Compliances of Thin-Walled Closed-Section Beams Stiffnesses of Sandwich Beams Transversely Loaded Beams Buckling of Beams Axially Loaded Beams with Doubly Symmetrical Cross Sections (Flexural and Torsional Buckling) Axially Loaded Beams with Symmetrical or Unsymmetrical Cross Sections (Flexural Torsional Buckling) Lateral Torsional Buckling of Beams with Symmetrical Cross Section Summary Free Vibration of Beams Beams with Doubly Symmetrical Cross Sections Beams with Symmetrical or Unsymmetrical Cross Sections Summary Effect of Shear Deformation Shells Shells of Revolution with Axisymmetrical Loading Cylindrical Shells Membrane Theory Built-In Ends Temperature Built-In Ends Springback Springback of Cylindrical Shells Doubly Curved Shells 384

7 CONTENTS ix 8.4 Buckling of Shells Buckling of Cylinders Finite Element Analysis Three-Dimensional Element Plate Element Beam Element Sublaminate Step 1. Elements of [J] due to In-Plane Stresses Step 2. Elements of [J] due to Out-of-Plane Normal Stresses Step 3. Elements of [ J] due to Out-of-Plane Shear Stresses Step 4. The Stiffness Matrix Failure Criteria Quadratic Failure Criterion Orthotropic Material Transversely Isotropic Material Isotropic Material Plane-Strain and Plane-Stress Conditions Proportional Loading Stress Ratio Maximum Stress Failure Criterion Maximum Strain Failure Criterion Plate with a Hole or a Notch Plate with a Circular Hole Plate with a Notch Characteristic Length Micromechanics Rule of Mixtures Longitudinal Young Modulus E Transverse Young Modulus E Longitudinal Shear Modulus G Transverse Shear Modulus G Longitudinal Poisson Ratio ν Transverse Poisson Ratio ν Thermal Expansion Coefficients Moisture Expansion Coefficients Thermal Conductivity Moisture Diffusivity Specific Heat Modified Rule of Mixtures Note on the Micromechanics Models 449 Appendix A. Cross-Sectional Properties of Thin-Walled Composite Beams 453 Appendix B. Buckling Loads and Natural Frequencies of Orthotropic Beams with Shear Deformation 461 Appendix C. Typical Material Properties 464 Index 469

8 List of Symbols We have used, wherever possible, notation standard in elasticity, structural analysis, and composite materials. We tried to avoid duplication, although there is some repetition of those symbols that are used only locally. In the following list we have not included those symbols that pertain only to the local discussion. Below, we give a verbal description of each symbol and, when appropriate, the number of the equation in which the symbol is first used. Latin letters A area A iso tensile stiffness of an isotropic laminate (Eq. 3.42) [A], A ij tensile stiffness of a laminate (Eqs. 3.18, 3.19) [a], a ij inverse of the [A] matrix for symmetric laminates (Eq. 3.29) [B], B ij stiffness of a laminate (Eqs. 3.18, 3.19) [C], C ij 3D stiffness matrix in the x 1, x 2, x 3 coordinate system (Eq. 2.22) [C], C ij 3D stiffness matrix in the x, y, z coordinate system (Eq. 2.19) c moisture concentration (Eq ); core thickness (Fig. 5.2) [D], D ij bending stiffness of a laminate (Eqs. 3.18, 3.19) [D], Dij reduced bending stiffness of a laminate (Eq. 4.1) D iso bending stiffness of an isotropic laminate (Eq. 3.42) D, D, D parameters (Table 6.2, page 222, Eq ) [d], d ij inverse of the [D] matrix for symmetrical laminates (Eq. 3.30) d, d t, d b distances for sandwich plates (Fig. 5.2) E 1, E 2, E 3 Young s moduli in the x 1, x 2, x 3 coordinate system (Table 2.5) [E] stiffness matrix in the FE calculation (Eq. 9.4) ÊA tensile stiffness of a beam (Eq. 6.8) ÊI bending stiffness of a beam (Eq. 6.8) ÊI ω warping stiffness of a beam (Eq ) F i, F ij strength parameters in the quadratic failure criterion (Eq. 10.2) xiii

9 xiv LIST OF SYMBOLS f ij constants in the quadratic failure criterion (Eq ) f, f ij frequency (Eq ) f x, f y, f z, body forces per unit volume (Eq. 2.13) G 23, G 13, G 12 shear moduli in the x 1, x 2, x 3 coordinate system (Table 2.5) ĜI t torsional stiffness of a beam (Eq. 6.8) h plate thickness h b, h t distances of the bottom and top surfaces of a plate from the reference plane (Eq. 3.9) i ω polar radius of gyration (Eq ) [J] inverse of the material stiffness matrix [E] (Eq. 9.16) K number of layers in a laminate; number of wall segments; stiffness parameter of a plate (Eq ) k rotational spring constant (Eq ) k equivalent length factor (Eq ) L x, L y dimensions of a plate L length; number of cells in a multicell beam (Eq ) L i, Li f load and failure load (Eq ) l x, lx o half buckling length (Eq ), half buckling length corresponding to the lowest buckling load of a long plate (Eq ) M x, M y, M xy bending and twist moments per unit length acting on a laminate (Eq. 3.9) Mx ht, Mht y, Mht xy hygrothermal moments per unit length (Eq ) M y, M z bending moments acting on a beam (Fig. 6.2) M ω bimoment acting on a beam (Eq ) N x, N y, N xy in-plane forces per unit length acting on a laminate (Eq. 3.9) N x0, N y0, N xy0 in-plane compressive forces per unit length (Eq ) Nx ht, Nht y, Nht xy hygrothermal forces per unit length (Eq ) N x, cr buckling load of a uniaxially loaded plate (Eq ) N axial force acting on a beam (Fig. 6.2) N cr, N B cr buckling load and buckling load due to bending deformation (Eq ) N cry, N crz buckling load in the x z and x y planes, respectively (Eqs , 7.110) N crψ buckling load under torsional buckling (Eqs , 7.110) [P], [P] stiffness matrix of a beam (Eqs. 6.2, 6.250). Without bar refers to the centroid; with bar to an arbitrarily chosen coordinate system p transverse load per unit area; distance between the origin and the tangent of the wall of a beam (Eq ) p x, p y, p z axial and transverse loads (per unit length) acting on a beam (Fig. 6.1); surface forces per unit area (Eq ) [Q], Q ij 2D plane-stress stiffness matrix in the x 1, x 2 coordinate system (Eq )

10 LIST OF SYMBOLS xv [Q], Q ij 2D plane-stress stiffness matrix in the x, y coordinate system (Eq ) Q cr buckling load resulting in lateral buckling (Eq ) q shear flow (Eq ). R stiffness parameter (Eq. 3.46) R stress ratio (Eq ) R x, R y, R xy radii of curvatures of a shell (Eq. 8.1) [R], R ij compliance matrix under plane-strain condition in the x 1, x 2 coordinate system (Eq. 2.79) [R], R ij compliance matrix under plane-strain condition in the x, y coordinate system (Eq. 2.65) [S], S ij 3D compliance matrix in the x 1, x 2, x 3 coordinate system (Eq. 2.23) [S], S ij 3D compliance matrix in the x, y, z coordinate system (Eq. 2.21) Ŝ ij shear stiffness of a beam, i, j = z, y,ω(eqs. 7.13, 7.36) S ij shear stiffness of a plate, i, j = 1, 2 (Eq. 5.15) ŝ ij shear compliance of a beam, i, j = z, y,ω(eq. 7.38) s + 1, s+ 2, s+ 3 tensile strengths (Eq ) s 1, s 2, s 3 compression strengths (Eq ) s 23, s 13, s 12 shear strengths (Eq ) T torque acting on a beam (Fig. 6.2) T ω restrained warping-induced torque (Eq ) T sv Saint-Venant torque (Eq ) [T σ ] 2D stress transformation matrix (Eq ) [ ˆT σ ] 3D stress transformation matrix (Eq ) [T ɛ ] 2D strain transformation matrix (Eq ) [ ˆT ɛ ] 3D strain transformation matrix (Eq ) t torque load acting on a beam (Fig. 6.1) t t, t b thicknesses of the top and bottom facesheets (Eq. 5.26) U strain energy (Eq ) U displacement in the x direction; varies with the x and y coordinates only (Eq. 2.50) u displacement in the x direction u o displacement of the reference surface in the x direction u 1, u 2, u 3 displacements in the x 1, x 2, and x 3 direction V displacement in the y direction; varies with the x and y coordinates only (Eq. 2.51) V f, V m, V v volume of fibers, matrix, and void V x, V y out-of-plane shear forces per unit length (Eq. 3.10) V y, V z transverse shear forces acting on a beam (Fig. 6.2) v displacement in the y direction v o displacement of the reference surface in the y direction v f,v m,v v volume fraction of fibers, matrix, and void

11 xvi LIST OF SYMBOLS W displacement in the z direction; varies with the x and y coordinates only (Eq. 2.52) [W], [W] compliance matrix of a beam (Eq. 6.17). No bar refers to the centroid; bar to an arbitrarily chosen coordinate system w deflection in the z direction w maximum deflection in the z direction (Eq. 4.29) w o deflection of the reference surface in the z direction w B,w S deflections due to bending and shear deformations (Eq. 7.85) y c, z c coordinates of the centroid of a beam (Eqs. 6.54, 6.73) y sc, z sc coordinates of the shear center of a beam (Eq ) z k, z k 1 coordinates of the top and bottom surfaces of the kth ply in a laminate (Eq. 3.20) Greek letters ɛ o,ht x α parameter describing shear deformation (Eq ) α i parameter describing shear deformation, i = w, ψ, N, ω (Eq ) [α],α ij compliance matrix of a laminate (Eq. 3.23) α, β parameters describing buckled shape of a shell (Eq. 8.78) α ij compliances for closed-section beams (Eq ) α i, α ij thermal expansion coefficients (Eqs , 2.158) β, λ parameters in the displacements of a cylinder (Eq. 8.30) [β],β ij compliance matrix of a laminate (Eq. 3.23) β ij compliance of symmetrical cross-section beams (Table 6.2) β ij compliance of closed-section beams (Eq ) β i, β ij moisture expansion coefficients in the x, y, z directions (Eqs , 2.159) β 1 property of the cross section (Eq ) γ y,γ z shear strain in a beam in the x y and x z planes (Eq. 7.2) γ yz, γ xz, γ xy engineering shear strain in the x, y, z coordinate system (Eq. 2.9) γ 23, γ 13, γ 12 engineering shear strain in the x 1, x 2, x 3 coordinate system h change in thickness (Eq ) T temperature change (Eq ) [δ], δ ij compliance matrix of a laminate (Eq. 3.23) δ ij compliance of closed-section beams (Eq ) ɛ x,... average strains in a sublaminate (Eq. 9.14) ɛ x, ɛ y, ɛ z engineering normal strains in the x, y, z coordinate system ɛ 1, ɛ 2, ɛ 3 engineering normal strains in the x 1, x 2, x 3 coordinate system ɛx o,ɛo y,γo xy strains of the reference surface,ɛy o,ht,γxy o,ht hygrothermal strains in a laminate (Eq ) ζ parameter of restraint (Eq ) polar moment of mass (Eq )

12 LIST OF SYMBOLS xvii k ply orientation ϑ rate of twist (Eq. 6.1) ϑ B,ϑ S rate of twist due to bending and shear deformation (Eq. 7.5) κ x,κ y,κ xy curvatures of the reference surface (Eq. 3.8) κx ht,κht y,κht xy hygrothermal curvatures of a laminate (Eq ) λ, λ cr,λ ij load parameter (Eq ); buckling load parameter (Eq ); eigenvalue (Eq ) µ Bi,µ Gi,µ Si parameters in the calculation of natural frequencies (Eqs , 6.400, 7.203) ν ij Poisson s ratio ξ,η,ζ coordinates attached to the wall of a beam (Fig. 6.13) ξ,ξ parameters in the expressions of the buckling loads of plates with rotationally restrained edges (Eq ) π p potential energy (Eq ) ρ x,ρ y,ρ z radius of curvature in the y z, x z, and x y planes (Eq. 2.45) ρ 1,ρ 2,ρ 3 radius of curvature in the x 2 x 3, x 1 x 3, and x 1 x 2 planes (Eq. 2.53) ρ comp,ρ f,ρ m densities of composite, fiber, and matrix ρ mass per unit area or per unit length σ 1, σ 2, σ 3 normal stresses in the x 1, x 2, x 3 coordinate system σ x, σ y, σ z normal stresses in the x, y, z coordinate system σ average stress τ 23, τ 13, τ 12 shear stresses in the x 1, x 2, x 3 coordinate system τ yz, τ xz, τ yx shear stresses in the x, y, z coordinate system χ xz,χ yz rotation of the normal of a plate in the x z and x y planes (Eqs. 3.2 and 5.1) χ y,χ z rotation of the cross section of a beam in the x y and x z planes (Eq. 7.2) ψ angle of rotation of the cross section about the beam axis (twist) (Fig. 6.3) bending stiffness of an unsymmetrical long plate (Eq. 4.52) potential energy of the external loads (Eq ) ω circular frequency (Eq ) ω B,ω S circular frequency of a beam due to bending and shear deformation (Eq ) ω y, ω z circular frequency of a freely vibrating beam in the x z and x y planes, respectively (Eq ) ω ψ circular frequency of a freely vibrating beam under torsional vibration (Eq ) ϱ, ϱ, ϱ, ϱ distances between the new and the old reference surfaces (Eqs. 3.47, 6.105, 6.107, A.3)

13 CHAPTER TWO Displacements, Strains, and Stresses We consider composite materials consisting of continuous or discontinuous fibers embedded in a matrix. Such a composite is heterogeneous, and the properties vary from point to point. On a scale that is large with respect to the fiber diameter, the fiber and matrix properties may be averaged, and the material may be treated as homogeneous. This assumption, commonly employed in macromechanical analyses of composites, is adopted here. Hence, the material is considered to be quasi-homogeneous, which implies that the properties are taken to be the same at every point. These properties are not the same as the properties of either the fiber or the matrix but are a combination of the properties of the constituents. In this chapter, equations are presented for calculating the displacements, stresses, and strains when the structure undergoes only small deformations and the material behaves in a linearly elastic manner. Continuous fiber-reinforced composite materials (and structures made of such materials) often have easily identifiable preferred directions associated with fiber orientations or symmetry planes. It is therefore convenient to employ two coordinate systems: a local coordinate system aligned, at a point, either with the fibers or with axes of symmetry, and a global coordinate system attached to a fixed reference point (Fig. 2.1). In this book the local and global Cartesian coordinate systems are designated respectively by x 1, x 2, x 3 and the x, y, z axes. In the x, y, z directions the displacements at a point Aare denoted by u, v, w, and in the x 1, x 2, x 3 directions by u 1, u 2, u 3 (Fig. 2.2). In the x, y, z coordinate system the normal stresses are denoted by σ x, σ y, and σ z and the shear stresses by τ yz, τ xz, and τ xy (Fig. 2.3). The corresponding normal and shear strains are ɛ x, ɛ y, ɛ z and γ yz, γ xz, γ xy, respectively. In the x 1, x 2, x 3 coordinate system the normal stresses are denoted by σ 1, σ 2, and σ 3 and the shear stresses by τ 23, τ 13, and τ 12 (Fig. 2.3). The corresponding normal and shear strains are ɛ 1, ɛ 2, ɛ 3, and γ 23, γ 13, γ 12, respectively. The symbol γ represents engineering shear strain that is twice the tensorial shear strain, γ ij = 2ɛ ij (i, j = x, y, z or i, j = 1, 2, 3). 3

14 4 DISPLACEMENTS, STRAINS, AND STRESSES zx, 3 x 2 y x x 1 Figure 2.1: The global x, y, z and local x 1, x 2, x 3 coordinate systems. A stress is taken to be positive when it acts on a positive face in the positive direction. According to this definition, all the stresses shown in Figure 2.3 are positive. The preceding stress and strain notations, referred to as engineering notations, are used throughout this book. Other notations, most notably tensorial and contracted notations, can frequently be found in the literature. The stresses and strains in different notations are summarized in Tables 2.1 and Strain Displacement Relations We consider a x long segment that undergoes a change in length, the new length being denoted by x. From Figure 2.4 it is seen that ( u + x = x + u + u ) x x, (2.1) where u and u + u x are the displacements of points A and B, respectively, in x the x direction. Accordingly, the normal strain in the x direction is ɛ x = x x = u x x. (2.2) Similarly, in the y and z directions the normal strains are ɛ y = v (2.3) y ɛ z = w z, (2.4) where v and w are the displacements in the y and z directions, respectively. z A' x 3 A' A u w u 1 A u3 v y u 2 x 1 x Figure 2.2: The x, y, z and x 1, x 2, x 3 coordinate systems and the corresponding displacements. x 2

15 2.1 STRAIN DISPLACEMENT RELATIONS 5 z σ z x 3 τ zx τ zy τ yz σ 3 x σ x τ xz τ xy τ yx σ y y x 1 σ 1 τ 13 τ 31 τ 32 τ 12 τ 23 τ 21 σ 2 x 2 Figure 2.3: The stresses in the global x, y, z and the local x 1, x 2, x 3 coordinate systems. For angular (shear) deformation the tensorial shear strain is the average change in the angle between two mutually perpendicular lines (Fig. 2.5) ɛ xy = α + β. (2.5) 2 For small deformations we have ( v + v x α tan α = x) v = v x x. (2.6) Similarly β = u/ y, and the xy component of the tensorial shear strain is ɛ xy = 1 2 ( u y + v ). (2.7) x In a similar manner we obtain the following expressions for the ɛ yz and ɛ xz components of the tensorial shear strains: ɛ yz = 1 2 ( v z + w ) y ɛ xz = 1 2 ( u z + w ). (2.8) x Table 2.1. Stress notations Normal stress Shear stress x, y, z coordinate system Tensorial stress σ xx σ yy σ zz σ yz σ xz σ xy Engineering stress σ x σ y σ z τ yz τ xz τ xy Contracted notation σ x σ y σ z σ q σ r σ s x 1, x 2, x 3 coordinate system Tensorial stress σ 11 σ 22 σ 33 σ 23 σ 13 σ 12 Engineering stress σ 1 σ 2 σ 3 τ 23 τ 13 τ 12 Contracted notation σ 1 σ 2 σ 3 σ 4 σ 5 σ 6

16 6 DISPLACEMENTS, STRAINS, AND STRESSES Table 2.2. Strain notations (the engineering and contracted notation shear strains are twice the tensorial shear strain) Normal strain Shear strain x, y, z coordinate system Tensorial strain ɛ xx ɛ yy ɛ zz ɛ yz ɛ xz ɛ xy Engineering strain ɛ x ɛ y ɛ z γ yz γ xz γ xy Contracted notation ɛ x ɛ y ɛ z ɛ q ɛ r ɛ s x 1, x 2, x 3 coordinate system Tensorial strain ɛ 11 ɛ 22 ɛ 33 ɛ 23 ɛ 13 ɛ 12 Engineering strain ɛ 1 ɛ 2 ɛ 3 γ 23 γ 13 γ 12 Contracted notation ɛ 1 ɛ 2 ɛ 3 ɛ 4 ɛ 5 ɛ 6 The engineering shear strains are twice the tensorial shear strains: γ yz = 2ɛ yz = v z + w (2.9) y γ xz = 2ɛ xz = u z + w (2.10) x γ xy = 2ɛ xy = u y + v x. (2.11) In the x 1, x 2, x 3 coordinate system the strain displacement relationships are also given by Eqs. (2.2) (2.4) and (2.9) (2.11) with x, y, z replaced by x 1, x 2, x 3, the subscripts x, y, z by 1, 2, 3, and u, v, w by u 1, u 2, u Equilibrium Equations The equilibrium equations at a point O are obtained by considering force and moment balances on a small x y z cubic element located at point O. (The point O is at the center of the element, Fig. 2.6.) We relate the stresses at one face to those at the opposite face by the Taylor series. By using only the first term of the Taylor series, force balance in the x direction gives σ x z y τ zx x y τ yx x z + ( σ x + σ x ) x x z y ( + τ zx + τ ) ( zx z z x y + τ yx + τ ) yx y y x z + f x x y z= 0, (2.12) y x A x u B A B u u + x x Figure 2.4: Displacement of the AB line segment. x

17 2.2 EQUILIBRIUM EQUATIONS 7 y A C x B v β A C α B v v + x x Figure 2.5: Displacement of the ABC segment. x where f x is the body force per unit volume in the x direction. After simplification, this equation becomes σ x x + τ yx y + τ zx z + f x = 0. (2.13) By similar arguments, the equilibrium equations in the y and z directions are τ xy x + σ y y + τ zy z + f y = 0, (2.14) τ xz x + τ yz y + σ z z + f z = 0, (2.15) where f y and f z are the body forces per unit volume in the y and z directions. A moment balance about an axis parallel to x and passing through the center (point O) gives (Fig. 2.7) τ yz x z y 2 τ zy x y z ( 2 + τ yz + τ ) yz y y x z y ( 2 τ zy + τ ) zy z z x y z = 0. (2.16) 2 z z τ xy σ x σz σz + z z τzy τzy + z z τzx τzx + z z τ σ τ xz x xy σ y τ yx O τ xz τ yz τ zx τ zy σ z + τxz x x + σx x x + τxy x x x y Figure 2.6: Stresses on the x y z cubic element. x τ yz τ yz + y y σy y σy + y y τ yx τ yx + y y

18 8 DISPLACEMENTS, STRAINS, AND STRESSES z τ zy τzy + z z z τ yz O τ zy x τ yz y + τ yz y y x y Figure 2.7: Stresses on the x y z cubic element that appear in the moment balance about an axis parallel to x and passing through the center (point O). By omitting higher order terms, which vanish in the limit x 0, y 0, z 0, this equation becomes τ yz = τ zy. (2.17) Similarly, we obtain the following equalities: τ xz = τ zx τ xy = τ yx. (2.18) By virtue of Eqs. (2.17) and (2.18), the three equilibrium equations (Eqs ) contain six unknowns, namely, the three normal stresses (σ x, σ y, σ z ) and the three shear stresses (τ yz, τ xz, τ xy ). In the x 1, x 2, x 3 coordinate system the equilibrium equations are also given by Eqs. (2.13) (2.15) with x, y, z replaced by x 1, x 2, x 3 and the subscripts x, y, z by 1, 2, Stress Strain Relationships In a composite material the fibers may be oriented in an arbitrary manner. Depending on the arrangements of the fibers, the material may behave differently in different directions. According to their behavior, composites may be characterized as generally anisotropic, monoclinic, orthotropic, transversely isotropic, or isotropic. In the following, we present the stress strain relationships for these types of materials under linearly elastic conditions Generally Anisotropic Material When there are no symmetry planes with respect to the alignment of the fibers the material is referred to as generally anisotropic. A fiber-reinforced composite material is, for example, generally anisotropic when the fibers are aligned in three nonorthogonal directions (Fig. 2.8).

19 2.3 STRESS STRAIN RELATIONSHIPS 9 Figure 2.8: Example of a generally anisotropic material. For a generally anisotropic linearly elastic material, in the x, y, z global coordinate system, the stress strain relationships are σ x = C 11 ɛ x + C 12 ɛ y + C 13 ɛ z + C 14 γ yz + C 15 γ xz + C 16 γ xy σ y = C 21 ɛ x + C 22 ɛ y + C 23 ɛ z + C 24 γ yz + C 25 γ xz + C 26 γ xy σ z = C 31 ɛ x + C 32 ɛ y + C 33 ɛ z + C 34 γ yz + C 35 γ xz + C 36 γ xy τ yz = C 41 ɛ x + C 42 ɛ y + C 43 ɛ z + C 44 γ yz + C 45 γ xz + C 46 γ xy τ xz = C 51 ɛ x + C 52 ɛ y + C 53 ɛ z + C 54 γ yz + C 55 γ xz + C 56 γ xy τ xy = C 61 ɛ x + C 62 ɛ y + C 63 ɛ z + C 64 γ yz + C 65 γ xz + C 66 γ xy. (2.19) Equation (2.19) may be written in the form σ x σ y σ z τ yz τ xz τ xy C 11 C 12 C 13 C 14 C 15 C 16 C 21 C 22 C 23 C 24 C 25 C 26 C 31 C 32 C 33 C 34 C 35 C 36 = C 41 C 42 C 43 C 44 C 45 C 46 C 51 C 52 C 53 C 54 C 55 C 56 C 61 C 62 C 63 C 64 C 65 C 66 ɛ x ɛ y ɛ z γ yz γ xz γ xy, (2.20) where C ij are the elements of the stiffness matrix [C ]inthex, y, z coordinate system. Inversion of Eq. (2.20) results in the following strain stress relationships: ɛ x S 11 S 12 S 13 S 14 S 15 S 16 ɛ y S 21 S 22 S 23 S 24 S 25 S 26 ɛ z S 31 S 32 S 33 S 34 S 35 S 36 = γ yz S 41 S 42 S 43 S 44 S 45 S 46 γ xz S 51 S 52 S 53 S 54 S 55 S 56 γ xy S 61 S 62 S 63 S 64 S 65 S 66 σ x σ y σ z τ yz τ xz τ xy, (2.21) where S ij are the elements of the compliance matrix [S ]inthex, y, z coordinate system and are defined in Table 2.3 (page 10). In this table tests are illustrated that, in principle, could provide means of determining the different compliance matrix elements.

20 10 DISPLACEMENTS, STRAINS, AND STRESSES Table 2.3. The elements of the compliance matrix [S] in the x, y, z coordinate system. The elements S ij (without bar) in the x 1, x 2, x 3 coordinate system are obtained by replacing x, y, z by 1, 2, 3 on the right-hand sides of the expressions. Test Elements of the compliance matrix σ x σ x S 11 = ɛ x /σ x S 21 = ɛ y /σ x S 31 = ɛ z /σ x S 41 = γ yz /σ x S 51 = γ xz /σ x S 61 = γ xy /σ x σ σ S 12 = ɛ x /σ y S 42 = γ yz /σ y y y S 22 = ɛ y /σ y S 52 = γ xz /σ y σ z σ z S 32 = ɛ z /σ y S 13 = ɛ x /σ z S 23 = ɛ y /σ z S 33 = ɛ z /σ z S 62 = γ xy /σ y S 43 = γ yz /σ z S 53 = γ xz /σ z S 63 = γ xy /σ z τ yz S 14 = ɛ x /τ yz S 44 = γ yz /τ yz S 24 = ɛ y /τ yz S 34 = ɛ z /τ yx S 54 = γ xz /τ yz S 64 = γ xy /τ yz τ xz S15 = ɛ x /τ xz S 45 = γ yz /τ xz S 25 = ɛ y /τ xz S 35 = ɛ z /τ xz S 55 = γ xz /τ xz S 65 = γ xy /τ xz τ xy S 16 = ɛ x /τ xy S 46 = γ yz /τ xy S 26 = ɛ y /τ xy S 36 = ɛ z /τ xy S 56 = γ xz /τ xy S 66 = γ xy /τ xy In the x 1, x 2, x 3 coordinate system the stress strain relationships are σ 1 C 11 C 12 C 13 C 14 C 15 C 16 ɛ 1 σ 2 C 21 C 22 C 23 C 24 C 25 C 26 ɛ 2 σ 3 C 31 C 32 C 33 C 34 C 35 C 36 ɛ 3 =, (2.22) τ 23 C 41 C 42 C 43 C 44 C 45 C 46 γ 23 τ 13 C 51 C 52 C 53 C 54 C 55 C 56 γ 13 τ 12 C 61 C 62 C 63 C 64 C 65 C 66 γ 12 where C ij are the elements of the stiffness matrix [C] inthex 1, x 2, x 3 coordinate system. By inverting Eq. (2.22) we obtain the following strain stress relationships: ɛ 1 S 11 S 12 S 13 S 14 S 15 S 16 σ 1 ɛ 2 S 21 S 22 S 23 S 24 S 25 S 26 σ 2 ɛ 3 S 31 S 32 S 33 S 34 S 35 S 36 σ 3 =, (2.23) γ 23 S 41 S 42 S 43 S 44 S 45 S 46 τ 23 γ 13 S 51 S 52 S 53 S 54 S 55 S 56 τ 13 γ 12 S 61 S 62 S 63 S 64 S 65 S 66 τ 12 where S ij are the elements of the compliance matrix [S]inthex 1, x 2, x 3 coordinate system.

TABLE OF CONTENTS. Mechanics of Composite Materials, Second Edition Autar K Kaw University of South Florida, Tampa, USA

TABLE OF CONTENTS. Mechanics of Composite Materials, Second Edition Autar K Kaw University of South Florida, Tampa, USA Mechanics of Composite Materials, Second Edition Autar K Kaw University of South Florida, Tampa, USA TABLE OF CONTENTS 1. INTRODUCTION TO COMPOSITE MATERIALS 1.1 Introduction... 1.2 Classification... 1.2.1

More information

NONLINEAR STRUCTURAL DYNAMICS USING FE METHODS

NONLINEAR STRUCTURAL DYNAMICS USING FE METHODS NONLINEAR STRUCTURAL DYNAMICS USING FE METHODS Nonlinear Structural Dynamics Using FE Methods emphasizes fundamental mechanics principles and outlines a modern approach to understanding structural dynamics.

More information

Lecture 8. Stress Strain in Multi-dimension

Lecture 8. Stress Strain in Multi-dimension Lecture 8. Stress Strain in Multi-dimension Module. General Field Equations General Field Equations [] Equilibrium Equations in Elastic bodies xx x y z yx zx f x 0, etc [2] Kinematics xx u x x,etc. [3]

More information

Consider an elastic spring as shown in the Fig.2.4. When the spring is slowly

Consider an elastic spring as shown in the Fig.2.4. When the spring is slowly .3 Strain Energy Consider an elastic spring as shown in the Fig..4. When the spring is slowly pulled, it deflects by a small amount u 1. When the load is removed from the spring, it goes back to the original

More information

Chapter 3. Load and Stress Analysis. Lecture Slides

Chapter 3. Load and Stress Analysis. Lecture Slides Lecture Slides Chapter 3 Load and Stress Analysis 2015 by McGraw Hill Education. This is proprietary material solely for authorized instructor use. Not authorized for sale or distribution in any manner.

More information

ELASTICITY AND FRACTURE MECHANICS. Vijay G. Ukadgaonker

ELASTICITY AND FRACTURE MECHANICS. Vijay G. Ukadgaonker THEORY OF ELASTICITY AND FRACTURE MECHANICS y x Vijay G. Ukadgaonker Theory of Elasticity and Fracture Mechanics VIJAY G. UKADGAONKER Former Professor Indian Institute of Technology Bombay Delhi-110092

More information

Laminated Composite Plates and Shells

Laminated Composite Plates and Shells Jianqiao Ye Laminated Composite Plates and Shells 3D Modelling With 62 Figures Springer Table of Contents 1. Introduction to Composite Materials 1 1.1 Introduction 1 1.2 Classification of Composite Materials

More information

3 2 6 Solve the initial value problem u ( t) 3. a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1

3 2 6 Solve the initial value problem u ( t) 3. a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1 Math Problem a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1 3 6 Solve the initial value problem u ( t) = Au( t) with u (0) =. 3 1 u 1 =, u 1 3 = b- True or false and why 1. if A is

More information

6. Bending CHAPTER OBJECTIVES

6. Bending CHAPTER OBJECTIVES CHAPTER OBJECTIVES Determine stress in members caused by bending Discuss how to establish shear and moment diagrams for a beam or shaft Determine largest shear and moment in a member, and specify where

More information

Bending of Simply Supported Isotropic and Composite Laminate Plates

Bending of Simply Supported Isotropic and Composite Laminate Plates Bending of Simply Supported Isotropic and Composite Laminate Plates Ernesto Gutierrez-Miravete 1 Isotropic Plates Consider simply a supported rectangular plate of isotropic material (length a, width b,

More information

Tuesday, February 11, Chapter 3. Load and Stress Analysis. Dr. Mohammad Suliman Abuhaiba, PE

Tuesday, February 11, Chapter 3. Load and Stress Analysis. Dr. Mohammad Suliman Abuhaiba, PE 1 Chapter 3 Load and Stress Analysis 2 Chapter Outline Equilibrium & Free-Body Diagrams Shear Force and Bending Moments in Beams Singularity Functions Stress Cartesian Stress Components Mohr s Circle for

More information

Computational Analysis for Composites

Computational Analysis for Composites Computational Analysis for Composites Professor Johann Sienz and Dr. Tony Murmu Swansea University July, 011 The topics covered include: OUTLINE Overview of composites and their applications Micromechanics

More information

Module III - Macro-mechanics of Lamina. Lecture 23. Macro-Mechanics of Lamina

Module III - Macro-mechanics of Lamina. Lecture 23. Macro-Mechanics of Lamina Module III - Macro-mechanics of Lamina Lecture 23 Macro-Mechanics of Lamina For better understanding of the macromechanics of lamina, the knowledge of the material properties in essential. Therefore, the

More information

Basic Equations of Elasticity

Basic Equations of Elasticity A Basic Equations of Elasticity A.1 STRESS The state of stress at any point in a loaded bo is defined completely in terms of the nine components of stress: σ xx,σ yy,σ zz,σ xy,σ yx,σ yz,σ zy,σ zx,andσ

More information

INTRODUCTION TO THE PHYSICS OF THE EARTH S INTERIOR

INTRODUCTION TO THE PHYSICS OF THE EARTH S INTERIOR INTRODUCTION TO THE PHYSICS OF THE EARTH S INTERIOR SECOND EDITION JEAN-PAULPOIRIER Institut de Physique du Globe de Paris PUBLISHED BY THE PRESS SYNDICATE OF THE UNIVERSITY OF CAMBRIDGE The Pitt Building,

More information

Example 3.7 Consider the undeformed configuration of a solid as shown in Figure 3.60.

Example 3.7 Consider the undeformed configuration of a solid as shown in Figure 3.60. 162 3. The linear 3-D elasticity mathematical model The 3-D elasticity model is of great importance, since it is our highest order hierarchical model assuming linear elastic behavior. Therefore, it provides

More information

Mechanics of Materials II. Chapter III. A review of the fundamental formulation of stress, strain, and deflection

Mechanics of Materials II. Chapter III. A review of the fundamental formulation of stress, strain, and deflection Mechanics of Materials II Chapter III A review of the fundamental formulation of stress, strain, and deflection Outline Introduction Assumtions and limitations Axial loading Torsion of circular shafts

More information

FINITE ELEMENT ANALYSIS OF COMPOSITE MATERIALS

FINITE ELEMENT ANALYSIS OF COMPOSITE MATERIALS FINITE ELEMENT ANALYSIS OF COMPOSITE MATERIALS Ever J. Barbero Department of Mechanical and Aerospace Engineering West Virginia University USA CRC Press Taylor &.Francis Group Boca Raton London New York

More information

Chapter 3. Load and Stress Analysis

Chapter 3. Load and Stress Analysis Chapter 3 Load and Stress Analysis 2 Shear Force and Bending Moments in Beams Internal shear force V & bending moment M must ensure equilibrium Fig. 3 2 Sign Conventions for Bending and Shear Fig. 3 3

More information

CHAPTER -6- BENDING Part -1-

CHAPTER -6- BENDING Part -1- Ishik University / Sulaimani Civil Engineering Department Mechanics of Materials CE 211 CHAPTER -6- BENDING Part -1-1 CHAPTER -6- Bending Outlines of this chapter: 6.1. Chapter Objectives 6.2. Shear and

More information

UNIVERSITY OF SASKATCHEWAN ME MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich

UNIVERSITY OF SASKATCHEWAN ME MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich UNIVERSITY OF SASKATCHEWAN ME 313.3 MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich A CLOSED BOOK EXAMINATION TIME: 3 HOURS For Marker s Use Only LAST NAME (printed): FIRST

More information

Flexural-Torsional Buckling of General Cold-Formed Steel Columns with Unequal Unbraced Lengths

Flexural-Torsional Buckling of General Cold-Formed Steel Columns with Unequal Unbraced Lengths Proceedings of the Annual Stability Conference Structural Stability Research Council San Antonio, Texas, March 21-24, 2017 Flexural-Torsional Buckling of General Cold-Formed Steel Columns with Unequal

More information

Advanced Structural Analysis EGF Section Properties and Bending

Advanced Structural Analysis EGF Section Properties and Bending Advanced Structural Analysis EGF316 3. Section Properties and Bending 3.1 Loads in beams When we analyse beams, we need to consider various types of loads acting on them, for example, axial forces, shear

More information

202 Index. failure, 26 field equation, 122 force, 1

202 Index. failure, 26 field equation, 122 force, 1 Index acceleration, 12, 161 admissible function, 155 admissible stress, 32 Airy's stress function, 122, 124 d'alembert's principle, 165, 167, 177 amplitude, 171 analogy, 76 anisotropic material, 20 aperiodic

More information

Presented By: EAS 6939 Aerospace Structural Composites

Presented By: EAS 6939 Aerospace Structural Composites A Beam Theory for Laminated Composites and Application to Torsion Problems Dr. BhavaniV. Sankar Presented By: Sameer Luthra EAS 6939 Aerospace Structural Composites 1 Introduction Composite beams have

More information

THEORY OF PLATES AND SHELLS

THEORY OF PLATES AND SHELLS THEORY OF PLATES AND SHELLS S. TIMOSHENKO Professor Emeritus of Engineering Mechanics Stanford University S. WOINOWSKY-KRIEGER Professor of Engineering Mechanics Laval University SECOND EDITION MCGRAW-HILL

More information

Stress, Strain Stress strain relationships for different types of materials Stress strain relationships for a unidirectional/bidirectional lamina

Stress, Strain Stress strain relationships for different types of materials Stress strain relationships for a unidirectional/bidirectional lamina Chapter 2 Macromechanical Analysis of a Lamina Stress, Strain Stress strain relationships for different types of materials Stress strain relationships for a unidirectional/bidirectional lamina Islamic

More information

3D Elasticity Theory

3D Elasticity Theory 3D lasticity Theory Many structural analysis problems are analysed using the theory of elasticity in which Hooke s law is used to enforce proportionality between stress and strain at any deformation level.

More information

Mechanics of Materials Primer

Mechanics of Materials Primer Mechanics of Materials rimer Notation: A = area (net = with holes, bearing = in contact, etc...) b = total width of material at a horizontal section d = diameter of a hole D = symbol for diameter E = modulus

More information

UNIT-I Introduction & Plane Stress and Plane Strain Analysis

UNIT-I Introduction & Plane Stress and Plane Strain Analysis SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY:: PUTTUR (AUTONOMOUS) Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : Advanced Solid Mechanics (18CE1002) Year

More information

A HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS

A HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS A HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS A. Kroker, W. Becker TU Darmstadt, Department of Mechanical Engineering, Chair of Structural Mechanics Hochschulstr. 1, D-64289 Darmstadt, Germany kroker@mechanik.tu-darmstadt.de,

More information

Samantha Ramirez, MSE. Stress. The intensity of the internal force acting on a specific plane (area) passing through a point. F 2

Samantha Ramirez, MSE. Stress. The intensity of the internal force acting on a specific plane (area) passing through a point. F 2 Samantha Ramirez, MSE Stress The intensity of the internal force acting on a specific plane (area) passing through a point. Δ ΔA Δ z Δ 1 2 ΔA Δ x Δ y ΔA is an infinitesimal size area with a uniform force

More information

Table of Contents. Preface...xvii. Part 1. Level

Table of Contents. Preface...xvii. Part 1. Level Preface...xvii Part 1. Level 1... 1 Chapter 1. The Basics of Linear Elastic Behavior... 3 1.1. Cohesion forces... 4 1.2. The notion of stress... 6 1.2.1. Definition... 6 1.2.2. Graphical representation...

More information

Comb resonator design (2)

Comb resonator design (2) Lecture 6: Comb resonator design () -Intro Intro. to Mechanics of Materials School of Electrical l Engineering i and Computer Science, Seoul National University Nano/Micro Systems & Controls Laboratory

More information

MECHANICS OF MATERIALS

MECHANICS OF MATERIALS CHATR Stress MCHANICS OF MATRIALS and Strain Axial Loading Stress & Strain: Axial Loading Suitability of a structure or machine may depend on the deformations in the structure as well as the stresses induced

More information

CHAPTER 5. Beam Theory

CHAPTER 5. Beam Theory CHPTER 5. Beam Theory SangJoon Shin School of Mechanical and erospace Engineering Seoul National University ctive eroelasticity and Rotorcraft Lab. 5. The Euler-Bernoulli assumptions One of its dimensions

More information

CHAPTER THREE SYMMETRIC BENDING OF CIRCLE PLATES

CHAPTER THREE SYMMETRIC BENDING OF CIRCLE PLATES CHAPTER THREE SYMMETRIC BENDING OF CIRCLE PLATES * Governing equations in beam and plate bending ** Solution by superposition 1.1 From Beam Bending to Plate Bending 1.2 Governing Equations For Symmetric

More information

Mechanical Engineering Ph.D. Preliminary Qualifying Examination Solid Mechanics February 25, 2002

Mechanical Engineering Ph.D. Preliminary Qualifying Examination Solid Mechanics February 25, 2002 student personal identification (ID) number on each sheet. Do not write your name on any sheet. #1. A homogeneous, isotropic, linear elastic bar has rectangular cross sectional area A, modulus of elasticity

More information

Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian

Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian ahmadian@iust.ac.ir Dynamic Response of MDOF Systems: Mode-Superposition Method Mode-Superposition Method:

More information

VIBRATION AND DAMPING ANALYSIS OF FIBER REINFORCED COMPOSITE MATERIAL CONICAL SHELLS

VIBRATION AND DAMPING ANALYSIS OF FIBER REINFORCED COMPOSITE MATERIAL CONICAL SHELLS VIBRATION AND DAMPING ANALYSIS OF FIBER REINFORCED COMPOSITE MATERIAL CONICAL SHELLS Mechanical Engineering Department, Indian Institute of Technology, New Delhi 110 016, India (Received 22 January 1992,

More information

CHAPTER 4: BENDING OF BEAMS

CHAPTER 4: BENDING OF BEAMS (74) CHAPTER 4: BENDING OF BEAMS This chapter will be devoted to the analysis of prismatic members subjected to equal and opposite couples M and M' acting in the same longitudinal plane. Such members are

More information

ME Final Exam. PROBLEM NO. 4 Part A (2 points max.) M (x) y. z (neutral axis) beam cross-sec+on. 20 kip ft. 0.2 ft. 10 ft. 0.1 ft.

ME Final Exam. PROBLEM NO. 4 Part A (2 points max.) M (x) y. z (neutral axis) beam cross-sec+on. 20 kip ft. 0.2 ft. 10 ft. 0.1 ft. ME 323 - Final Exam Name December 15, 2015 Instructor (circle) PROEM NO. 4 Part A (2 points max.) Krousgrill 11:30AM-12:20PM Ghosh 2:30-3:20PM Gonzalez 12:30-1:20PM Zhao 4:30-5:20PM M (x) y 20 kip ft 0.2

More information

UNIT- I Thin plate theory, Structural Instability:

UNIT- I Thin plate theory, Structural Instability: UNIT- I Thin plate theory, Structural Instability: Analysis of thin rectangular plates subject to bending, twisting, distributed transverse load, combined bending and in-plane loading Thin plates having

More information

VYSOKÁ ŠKOLA BÁŇSKÁ TECHNICKÁ UNIVERZITA OSTRAVA

VYSOKÁ ŠKOLA BÁŇSKÁ TECHNICKÁ UNIVERZITA OSTRAVA VYSOKÁ ŠKOLA BÁŇSKÁ TECHNICKÁ UNIVERZITA OSTRAVA FAKULTA METALURGIE A MATERIÁLOVÉHO INŽENÝRSTVÍ APPLIED MECHANICS Study Support Leo Václavek Ostrava 2015 Title:Applied Mechanics Code: Author: doc. Ing.

More information

DYNAMIC RESPONSE OF SYNTACTIC FOAM CORE SANDWICH USING A MULTIPLE SCALES BASED ASYMPTOTIC METHOD

DYNAMIC RESPONSE OF SYNTACTIC FOAM CORE SANDWICH USING A MULTIPLE SCALES BASED ASYMPTOTIC METHOD ECCM6-6 TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, -6 June 4 DYNAMIC RESPONSE OF SYNTACTIC FOAM CORE SANDWICH USING A MULTIPLE SCALES BASED ASYMPTOTIC METHOD K. V. Nagendra Gopal a*,

More information

: APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE

: APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIODS 1 Simple stresses

More information

Exercise: concepts from chapter 8

Exercise: concepts from chapter 8 Reading: Fundamentals of Structural Geology, Ch 8 1) The following exercises explore elementary concepts associated with a linear elastic material that is isotropic and homogeneous with respect to elastic

More information

CE 221: MECHANICS OF SOLIDS I CHAPTER 1: STRESS. Dr. Krisada Chaiyasarn Department of Civil Engineering, Faculty of Engineering Thammasat university

CE 221: MECHANICS OF SOLIDS I CHAPTER 1: STRESS. Dr. Krisada Chaiyasarn Department of Civil Engineering, Faculty of Engineering Thammasat university CE 221: MECHANICS OF SOLIDS I CHAPTER 1: STRESS By Dr. Krisada Chaiyasarn Department of Civil Engineering, Faculty of Engineering Thammasat university Agenda Introduction to your lecturer Introduction

More information

SEMM Mechanics PhD Preliminary Exam Spring Consider a two-dimensional rigid motion, whose displacement field is given by

SEMM Mechanics PhD Preliminary Exam Spring Consider a two-dimensional rigid motion, whose displacement field is given by SEMM Mechanics PhD Preliminary Exam Spring 2014 1. Consider a two-dimensional rigid motion, whose displacement field is given by u(x) = [cos(β)x 1 + sin(β)x 2 X 1 ]e 1 + [ sin(β)x 1 + cos(β)x 2 X 2 ]e

More information

Comparison of Ply-wise Stress-Strain results for graphite/epoxy laminated plate subjected to in-plane normal loads using CLT and ANSYS ACP PrepPost

Comparison of Ply-wise Stress-Strain results for graphite/epoxy laminated plate subjected to in-plane normal loads using CLT and ANSYS ACP PrepPost Comparison of Ply-wise Stress-Strain results for graphite/epoxy laminated plate subjected to in-plane normal loads using CLT and ANSYS ACP PrepPost 1 Mihir A. Mehta, 2 Satyen D. Ramani 1 PG Student, Department

More information

Review of Strain Energy Methods and Introduction to Stiffness Matrix Methods of Structural Analysis

Review of Strain Energy Methods and Introduction to Stiffness Matrix Methods of Structural Analysis uke University epartment of Civil and Environmental Engineering CEE 42L. Matrix Structural Analysis Henri P. Gavin Fall, 22 Review of Strain Energy Methods and Introduction to Stiffness Matrix Methods

More information

COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4017 COURSE CATEGORY : A PERIODS/WEEK : 6 PERIODS/ SEMESTER : 108 CREDITS : 5

COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4017 COURSE CATEGORY : A PERIODS/WEEK : 6 PERIODS/ SEMESTER : 108 CREDITS : 5 COURSE TITLE : APPLIED MECHANICS & STRENGTH OF MATERIALS COURSE CODE : 4017 COURSE CATEGORY : A PERIODS/WEEK : 6 PERIODS/ SEMESTER : 108 CREDITS : 5 TIME SCHEDULE MODULE TOPICS PERIODS 1 Simple stresses

More information

Foundations and Applications of Engineering Mechanics

Foundations and Applications of Engineering Mechanics Foundations and Applications of Engineering Mechanics 4843/24, 2nd Floor, Ansari Road, Daryaganj, Delhi - 110002, India Cambridge University Press is part of the University of Cambridge. It furthers the

More information

MECHANICS OF MATERIALS

MECHANICS OF MATERIALS Third E CHAPTER 2 Stress MECHANICS OF MATERIALS Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf Lecture Notes: J. Walt Oler Texas Tech University and Strain Axial Loading Contents Stress & Strain:

More information

3. BEAMS: STRAIN, STRESS, DEFLECTIONS

3. BEAMS: STRAIN, STRESS, DEFLECTIONS 3. BEAMS: STRAIN, STRESS, DEFLECTIONS The beam, or flexural member, is frequently encountered in structures and machines, and its elementary stress analysis constitutes one of the more interesting facets

More information

The Rotating Inhomogeneous Elastic Cylinders of. Variable-Thickness and Density

The Rotating Inhomogeneous Elastic Cylinders of. Variable-Thickness and Density Applied Mathematics & Information Sciences 23 2008, 237 257 An International Journal c 2008 Dixie W Publishing Corporation, U. S. A. The Rotating Inhomogeneous Elastic Cylinders of Variable-Thickness and

More information

ME 582 Advanced Materials Science. Chapter 2 Macromechanical Analysis of a Lamina (Part 2)

ME 582 Advanced Materials Science. Chapter 2 Macromechanical Analysis of a Lamina (Part 2) ME 582 Advanced Materials Science Chapter 2 Macromechanical Analysis of a Lamina (Part 2) Laboratory for Composite Materials Research Department of Mechanical Engineering University of South Alabama, Mobile,

More information

Module-6: Laminated Composites-II. Learning Unit-1: M6.1. M 6.1 Structural Mechanics of Laminates

Module-6: Laminated Composites-II. Learning Unit-1: M6.1. M 6.1 Structural Mechanics of Laminates Module-6: Laminated Composites-II Learning Unit-1: M6.1 M 6.1 Structural Mechanics of Laminates Classical Lamination Theory: Laminate Stiffness Matrix To this point in the development of classical lamination

More information

Symmetric Bending of Beams

Symmetric Bending of Beams Symmetric Bending of Beams beam is any long structural member on which loads act perpendicular to the longitudinal axis. Learning objectives Understand the theory, its limitations and its applications

More information

Mechanical Design in Optical Engineering

Mechanical Design in Optical Engineering Torsion Torsion: Torsion refers to the twisting of a structural member that is loaded by couples (torque) that produce rotation about the member s longitudinal axis. In other words, the member is loaded

More information

Professors Dean and Dalrymple are also authors of the well-known Water Wave Mechanics for Engineers and Scientists.

Professors Dean and Dalrymple are also authors of the well-known Water Wave Mechanics for Engineers and Scientists. COASTAL PROCESSES The world s coastlines, dividing land from sea, are geological environments unique in their composition and the physical processes affecting them. Humans have been building structures

More information

Smart Materials, Adaptive Structures, and Intelligent Mechanical Systems

Smart Materials, Adaptive Structures, and Intelligent Mechanical Systems Smart Materials, Adaptive Structures, and Intelligent Mechanical Systems Bishakh Bhattacharya & Nachiketa Tiwari Indian Institute of Technology Kanpur Lecture 19 Analysis of an Orthotropic Ply References

More information

Torsion of shafts with circular symmetry

Torsion of shafts with circular symmetry orsion of shafts with circular symmetry Introduction Consider a uniform bar which is subject to a torque, eg through the action of two forces F separated by distance d, hence Fd orsion is the resultant

More information

7.3 Design of members subjected to combined forces

7.3 Design of members subjected to combined forces 7.3 Design of members subjected to combined forces 7.3.1 General In the previous chapters of Draft IS: 800 LSM version, we have stipulated the codal provisions for determining the stress distribution in

More information

Unit 13 Review of Simple Beam Theory

Unit 13 Review of Simple Beam Theory MIT - 16.0 Fall, 00 Unit 13 Review of Simple Beam Theory Readings: Review Unified Engineering notes on Beam Theory BMP 3.8, 3.9, 3.10 T & G 10-15 Paul A. Lagace, Ph.D. Professor of Aeronautics & Astronautics

More information

7.6 Stress in symmetrical elastic beam transmitting both shear force and bending moment

7.6 Stress in symmetrical elastic beam transmitting both shear force and bending moment 7.6 Stress in symmetrical elastic beam transmitting both shear force and bending moment à It is more difficult to obtain an exact solution to this problem since the presence of the shear force means that

More information

. D CR Nomenclature D 1

. D CR Nomenclature D 1 . D CR Nomenclature D 1 Appendix D: CR NOMENCLATURE D 2 The notation used by different investigators working in CR formulations has not coalesced, since the topic is in flux. This Appendix identifies the

More information

Composites Design and Analysis. Stress Strain Relationship

Composites Design and Analysis. Stress Strain Relationship Composites Design and Analysis Stress Strain Relationship Composite design and analysis Laminate Theory Manufacturing Methods Materials Composite Materials Design / Analysis Engineer Design Guidelines

More information

[5] Stress and Strain

[5] Stress and Strain [5] Stress and Strain Page 1 of 34 [5] Stress and Strain [5.1] Internal Stress of Solids [5.2] Design of Simple Connections (will not be covered in class) [5.3] Deformation and Strain [5.4] Hooke s Law

More information

in this web service Cambridge University Press

in this web service Cambridge University Press CONTINUUM MECHANICS This is a modern textbook for courses in continuum mechanics. It provides both the theoretical framework and the numerical methods required to model the behavior of continuous materials.

More information

THE BENDING STIFFNESSES OF CORRUGATED BOARD

THE BENDING STIFFNESSES OF CORRUGATED BOARD AMD-Vol. 145/MD-Vol. 36, Mechanics of Cellulosic Materials ASME 1992 THE BENDING STIFFNESSES OF CORRUGATED BOARD S. Luo and J. C. Suhling Department of Mechanical Engineering Auburn University Auburn,

More information

Esben Byskov. Elementary Continuum. Mechanics for Everyone. With Applications to Structural Mechanics. Springer

Esben Byskov. Elementary Continuum. Mechanics for Everyone. With Applications to Structural Mechanics. Springer Esben Byskov Elementary Continuum Mechanics for Everyone With Applications to Structural Mechanics Springer Contents Preface v Contents ix Introduction What Is Continuum Mechanics? "I Need Continuum Mechanics

More information

Autoparametric Resonance in Mechanical Systems. Thijs Ruijgrok Ferdinand Verhulst Radoslav Nabergoj

Autoparametric Resonance in Mechanical Systems. Thijs Ruijgrok Ferdinand Verhulst Radoslav Nabergoj Autoparametric Resonance in Mechanical Systems Aleš Tondl Thijs Ruijgrok Ferdinand Verhulst Radoslav Nabergoj PUBLISHED BY THE PRESS SYNDICATE OF THE UNIVERSITY OF CAMBRIDGE The Pitt Building, Trumpington

More information

Hygrothermal stresses in laminates

Hygrothermal stresses in laminates Hygrothermal stresses in laminates Changing environment conditions (temperature and moisture) have an important effect on the properties which are matrix dominated. Change in temperaturet and moisture

More information

Sub. Code:

Sub. Code: Important Instructions to examiners: ) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. ) The model answer and the answer written by candidate may

More information

QUESTION BANK SEMESTER: III SUBJECT NAME: MECHANICS OF SOLIDS

QUESTION BANK SEMESTER: III SUBJECT NAME: MECHANICS OF SOLIDS QUESTION BANK SEMESTER: III SUBJECT NAME: MECHANICS OF SOLIDS UNIT 1- STRESS AND STRAIN PART A (2 Marks) 1. Define longitudinal strain and lateral strain. 2. State Hooke s law. 3. Define modular ratio,

More information

FINAL EXAMINATION. (CE130-2 Mechanics of Materials)

FINAL EXAMINATION. (CE130-2 Mechanics of Materials) UNIVERSITY OF CLIFORNI, ERKELEY FLL SEMESTER 001 FINL EXMINTION (CE130- Mechanics of Materials) Problem 1: (15 points) pinned -bar structure is shown in Figure 1. There is an external force, W = 5000N,

More information

A short review of continuum mechanics

A short review of continuum mechanics A short review of continuum mechanics Professor Anette M. Karlsson, Department of Mechanical ngineering, UD September, 006 This is a short and arbitrary review of continuum mechanics. Most of this material

More information

EFFECT OF ELLIPTIC OR CIRCULAR HOLES ON THE STRESS DISTRIBUTION IN PLATES

EFFECT OF ELLIPTIC OR CIRCULAR HOLES ON THE STRESS DISTRIBUTION IN PLATES EFFECT OF ELLIPTIC OR CIRCULAR HOLES ON THE STRESS DISTRIBUTION IN PLATES OF WOOD OR PLYWOOD CONSIDERED AS ORTHOTROPIC MATERIALS Information Revied and Reaffirmed March 1956 No. 1510 EFFECT OF ELLIPTIC

More information

PERIYAR CENTENARY POLYTECHNIC COLLEGE PERIYAR NAGAR - VALLAM THANJAVUR. DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK

PERIYAR CENTENARY POLYTECHNIC COLLEGE PERIYAR NAGAR - VALLAM THANJAVUR. DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK PERIYAR CENTENARY POLYTECHNIC COLLEGE PERIYAR NAGAR - VALLAM - 613 403 - THANJAVUR. DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub : Strength of Materials Year / Sem: II / III Sub Code : MEB 310

More information

MECE 3321 MECHANICS OF SOLIDS CHAPTER 1

MECE 3321 MECHANICS OF SOLIDS CHAPTER 1 MECE 3321 MECHANICS O SOLIDS CHAPTER 1 Samantha Ramirez, MSE WHAT IS MECHANICS O MATERIALS? Rigid Bodies Statics Dynamics Mechanics Deformable Bodies Solids/Mech. Of Materials luids 1 WHAT IS MECHANICS

More information

STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS

STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS 1 UNIT I STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS 1. Define: Stress When an external force acts on a body, it undergoes deformation. At the same time the body resists deformation. The

More information

Linear elastic analysis of thin laminated beams with uniform and symmetric cross-section

Linear elastic analysis of thin laminated beams with uniform and symmetric cross-section Applied and Computational Mechanics 2 (2008) 397 408 Linear elastic analysis of thin laminated beams with uniform and symmetric cross-section M. Zajíček a, a Faculty of Applied Sciences, UWB in Pilsen,

More information

Comb Resonator Design (2)

Comb Resonator Design (2) Lecture 6: Comb Resonator Design () -Intro. to Mechanics of Materials Sh School of felectrical ti lengineering i and dcomputer Science, Si Seoul National University Nano/Micro Systems & Controls Laboratory

More information

Nomenclature. Length of the panel between the supports. Width of the panel between the supports/ width of the beam

Nomenclature. Length of the panel between the supports. Width of the panel between the supports/ width of the beam omenclature a b c f h Length of the panel between the supports Width of the panel between the supports/ width of the beam Sandwich beam/ panel core thickness Thickness of the panel face sheet Sandwich

More information

MECHANICS OF MATERIALS

MECHANICS OF MATERIALS Third CHTR Stress MCHNICS OF MTRIS Ferdinand. Beer. Russell Johnston, Jr. John T. DeWolf ecture Notes: J. Walt Oler Texas Tech University and Strain xial oading Contents Stress & Strain: xial oading Normal

More information

16.20 HANDOUT #2 Fall, 2002 Review of General Elasticity

16.20 HANDOUT #2 Fall, 2002 Review of General Elasticity 6.20 HANDOUT #2 Fall, 2002 Review of General Elasticity NOTATION REVIEW (e.g., for strain) Engineering Contracted Engineering Tensor Tensor ε x = ε = ε xx = ε ε y = ε 2 = ε yy = ε 22 ε z = ε 3 = ε zz =

More information

GATE SOLUTIONS E N G I N E E R I N G

GATE SOLUTIONS E N G I N E E R I N G GATE SOLUTIONS C I V I L E N G I N E E R I N G From (1987-018) Office : F-16, (Lower Basement), Katwaria Sarai, New Delhi-110016 Phone : 011-65064 Mobile : 81309090, 9711853908 E-mail: info@iesmasterpublications.com,

More information

Chapter 5 Elastic Strain, Deflection, and Stability 1. Elastic Stress-Strain Relationship

Chapter 5 Elastic Strain, Deflection, and Stability 1. Elastic Stress-Strain Relationship Chapter 5 Elastic Strain, Deflection, and Stability Elastic Stress-Strain Relationship A stress in the x-direction causes a strain in the x-direction by σ x also causes a strain in the y-direction & z-direction

More information

Theory of Elasticity

Theory of Elasticity Theory of Elasticity Aldo Maceri Theory of Elasticity 123 Prof. Dr.-Ing. Aldo Maceri Universitá Roma Tre Departimento di Ingegneria Meccanica e Industriale Via della Vasca Navale, 79 00146 Roma Italy

More information

ME 7502 Lecture 2 Effective Properties of Particulate and Unidirectional Composites

ME 7502 Lecture 2 Effective Properties of Particulate and Unidirectional Composites ME 75 Lecture Effective Properties of Particulate and Unidirectional Composites Concepts from Elasticit Theor Statistical Homogeneit, Representative Volume Element, Composite Material Effective Stress-

More information

Design of Beams (Unit - 8)

Design of Beams (Unit - 8) Design of Beams (Unit - 8) Contents Introduction Beam types Lateral stability of beams Factors affecting lateral stability Behaviour of simple and built - up beams in bending (Without vertical stiffeners)

More information

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each.

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each. GTE 2016 Q. 1 Q. 9 carry one mark each. D : SOLID MECHNICS Q.1 single degree of freedom vibrating system has mass of 5 kg, stiffness of 500 N/m and damping coefficient of 100 N-s/m. To make the system

More information

EE C247B ME C218 Introduction to MEMS Design Spring 2017

EE C247B ME C218 Introduction to MEMS Design Spring 2017 247B/M 28: Introduction to MMS Design Lecture 0m2: Mechanics of Materials CTN 2/6/7 Outline C247B M C28 Introduction to MMS Design Spring 207 Prof. Clark T.- Reading: Senturia, Chpt. 8 Lecture Topics:

More information

Lecture 15 Strain and stress in beams

Lecture 15 Strain and stress in beams Spring, 2019 ME 323 Mechanics of Materials Lecture 15 Strain and stress in beams Reading assignment: 6.1 6.2 News: Instructor: Prof. Marcial Gonzalez Last modified: 1/6/19 9:42:38 PM Beam theory (@ ME

More information

Frequently Asked Questions

Frequently Asked Questions Frequently Asked Questions Why do we have to make the assumption that plane sections plane? How about bars with non-axis symmetric cross section? The formulae derived look very similar to beam and axial

More information

Constitutive Equations

Constitutive Equations Constitutive quations David Roylance Department of Materials Science and ngineering Massachusetts Institute of Technology Cambridge, MA 0239 October 4, 2000 Introduction The modules on kinematics (Module

More information

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each. Q.1 Find the force (in kn) in the member BH of the truss shown.

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each. Q.1 Find the force (in kn) in the member BH of the truss shown. D : SOLID MECHANICS Q. 1 Q. 9 carry one mark each. Q.1 Find the force (in kn) in the member BH of the truss shown. Q.2 Consider the forces of magnitude F acting on the sides of the regular hexagon having

More information

Mechanical Behavior of Composite Tapered Lamina

Mechanical Behavior of Composite Tapered Lamina International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 10, Issue 8 (August 2014), PP.19-27 Mechanical Behavior of Composite Tapered Lamina

More information

Bone Tissue Mechanics

Bone Tissue Mechanics Bone Tissue Mechanics João Folgado Paulo R. Fernandes Instituto Superior Técnico, 2016 PART 1 and 2 Introduction The objective of this course is to study basic concepts on hard tissue mechanics. Hard tissue

More information