Features. Typical Applications. ProLight STAR/O with PG1C-1LxE Technical Datasheet Version: /04

Transcription

1 ProLight STAR/O with PG1C-1LxE Technical Datasheet Version: 1.2 Features High Flux per LED Various colors Good color uniformity More energy efficient than incandescent and most halogen lamps Low Voltage DC operated Instant light (less than 100ns) No UV Superior ESD protection Typical Applications Reading lights (car, bus, aircraft) Portable (flashlight, bicycle) Uplighters/Downlighters Decorative/Entertainment Bollards/Security/Garden Cove/Undershelf/Task Indoor/Outdoor Commercial and Residential Architectural Automotive Ext (Stop-Tail-Turn, CHMSL, Mirror Side Repeat) /04

2 Table of Contents Part Number List Mechanical Dimensions Flux Characteristics of LED Electrical Characteristics of Module Optical Characteristics of Module Absolute Maximum Ratings Photometric Luminous Flux Bin Structure of LE Color Bin Dominant Wavelength Bin Structure Color Spectrum Light Output Characteristics Forward Current Characteristics Ambient Temperature vs. Maximum Forward Current Typical Representative Spatial Radiation Patter Part Number List Part Number Description LED module MCPCB Collimator P/N Holder P/N PG1C-1LxC PG1C-1LxE Star/O 15 Square Type PG1N-NX15 PG1N-SO02 PG1C-1LxG PG1C-1LxE Star/O 25 Square Type PG1N-NX23 PG1N-SO02 PG1C-1LxE PG1C-1LxH PG1C-1LxE Star/O 35 Square Type PG1C-NX36 PG1N-SO01 PG1C-1LxD PG1C-1LxE Star/O 45 Square Type PG1N-NX43 PG1N-SO02 2

3 Mechanical Dimensions and Illuminance Chart Part Number:PG1C-1LxC Notes: 1. Slots in aluminum-core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawing not to scale. 4. All dimensions are in millimeters. *The appearance and specifications of the product may be modified for improvement without notice. 3

4 Mechanical Dimensions and Illuminance Chart Part Number:PG1C-1LxG Notes: 1. Slots in aluminum-core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawing not to scale. 4. All dimensions are in millimeters. *The appearance and specifications of the product may be modified for improvement without notice. 4

5 Mechanical Dimensions and Illuminance Chart Part Number:PG1C-1LxH Notes: 1. Slots in aluminum-core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawing not to scale. 4. All dimensions are in millimeters. *The appearance and specifications of the product may be modified for improvement without notice. 5

6 Mechanical Dimensions and Illuminance Chart Part Number:PG1C-1LxD Notes: 1. Slots in aluminum-core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawing not to scale. 4. All dimensions are in millimeters. *The appearance and specifications of the product may be modified for improvement without notice. 6

7 Flux Characteristics of LED at 350mA, T J = 25 C Radiation Part Number LumiousFlux or Power Color Pattern Module Minimum Typical Lambertian White PG1C-1LWx Warm White PG1C-1LVx Red PG1C-1LRx Amber PG1C-1LAx Green PG1C-1LGx Blue PG1C-1LBx ProLight maintains a tolerance of ± 10% on flux and power measurements. Please do not drive at rated current more than 1 second without proper heat sink. Electrical Characteristics of Module at 350mA, T J = 25 C Forward Voltage V F (V) Color Min. Typ. Max. White Warm White Red Amber Green Blue Thermal Resistance Junction to Board ( C/ W) Optical Characteristics of Module at 350mA, T J = 25 C Dominant Wavelength λd, or Color Temperature CCT PG1C-1LxC PG1C-1LxG PG1C-1LxH PG1C-1LxD Color Min. Typ. Max. VA BA X VA BA X VA BA X VA BA X White 4100 K 5500 K K Warm White 2700 K 3300 K 4100 K Red nm 623 nm 631 nm Amber 587 nm 592 nm 597 nm Green 515 nm 525 nm 535 nm Blue 455 nm 465 nm 475 nm ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements. ProLight maintains a tolerance of ± 5% for CCT measurements. 7

8 Absolute Maximum Ratings Parameter DC Forward Current (ma) Peak Pulsed Forward Current (ma) Average Forward Current (ma) ESD Sensitivity (HBM per MIL-STD-883E Method ) LED Junction Temperature ( C) Aluminum-core PCB Temperature ( C) Storage & Operating Temperature ( C) White/Warm White/ Red/Amber/Green/Blue ±4000V (Class III) to +75 Photometric Luminous Flux Bin Structure Color White Bin Code T2 U1 Minimum Maximum Available Photometric Flux (lm) Photometric Flux (lm) Color Bins All Yx, Xx, Wx, Vx, Ux 1 Warm White T1 T2 U All All Sx, Rx 1 Red Q R S All All Amber Q R S All All Green S2 T1 T All All Blue L M N A, A, 1, ProLight maintains a tolerance of ± 10% on flux and power measurements. The flux bin of the product may be modified for improvement without notice. 1 The rest of color bins are not 100% ready for order currently. Please ask for quote and order possibility. 8

9 y Color Bin White and Warm White Binning Structure Graphical Representation K 3250 K 3050 K 2850 K 2700 K K 5650 K 6300 K VN WN V0 XN W K 5000 K TN UN T0 U K S0 S K R0 R1 Q0 Q1 P0 P1 Warm White N0 N1 M0 M1 Planckian (BBL) K Y0 YA X0 WP XP White x 9

10 Color Bins Y0 YA CCT 8000KCCT 7000K CCT 6000K X0X1CCT WA W05500K V0 CCT 5000K V1 CCT 4500K White Bin Structure Bin Code x y Typ. CCT Typ. CCT Bin Code x y (K) (K) T WN TN WP U X UN XN V XP VN Y W YA Tolerance on each color bin (x, y) is ± 0.01 Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. 10

11 Color Bins Y0 YA CCT 8000KCCT 7000K CCT 6000K X0X1CCT WA W05500K V0 CCT 5000K V1 CCT 4500K Warm White Bin Structure Bin Code x y Typ. CCT Typ. CCT Bin Code x y (K) (K) M Q M Q N R N R P S P S Tolerance on each color bin (x, y) is ± 0.01 Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. 11

12 Dominant Wavelength Bin Structure Color Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) Red Amber Green A Blue A ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements. Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. 12

13 Color Spectrum, T J = 25 C 1. White 1.0 Relative Spectral Power Distribution White Standard Eye Response Cruve Wavelength(nm) 2. Warm White Relative Spectral Power Distribution 1.0 Standard Eye Response Cruve Warm White Wavelength(nm) 3. Blue Green Amber Red Relative Spectral Power Distribution Blue Green Amber Red Wavelength(nm) 13

14 Light Output Characteristics Relative Light Output vs. Junction Temperature at 350mA Relative Light Output (%) White, Warm White Green Blue Junction Temperature, T J ( ) Red Amber Relative Light Output (%) Junction Temperature, T J ( ) 14

15 Forward Current Characteristics, T J = 25 C 1. Forward Voltage vs. Forward Current Average Forward Current (ma) White, Warm White, Green, Blue Forward Voltage (V) Average Forward Current (ma) Red, Amber Forward Voltage (V) 2. Forward Current vs. Normalized Relative Luminous Flux Relative Luminous Flux White, Warm White, Green, Blue Relative Luminous Flux Red, Amber Forward Current (ma) Forward Current (ma) 15

16 Ambient Temperature vs. Maximum Forward Current 1. White, Warm White, Green, Blue (T JMAX = 120 C, T Ambient = 75 C) Forward Current (ma) Rθ J-A = 60 C/W Rθ J-A = 50 C/W Rθ J-A = 40 C/W Rθ J-A = 30 C/W Ambient Temperature ( ) 2. Red, Amber (T JMAX = 120 C, T Ambient = 75 C) Forward Current (ma) Rθ J-A = 60 C/W Rθ J-A = 50 C/W Rθ J-A = 40 C/W Rθ J-A = 30 C/W Ambient Temperature ( ) 16

17 Typical Fig Representative 1. Forward Current vs. Spatial Forward Radiation Pattern Fig 2. Relative Luminous Flux vs. Spot Radiation Pattern Relative Intensity Angular Displacement (Degrees) PG1C-1LxC PG1C-1LxG PG1C-1LxH PG1C-1LxD 17