Technology Corporation

Transcription

1 Technology Corporation ProLight PG1X-1LXS 1W Power LED Technical Datasheet Version: 2.5 Features High flux per LED Very long operating life(up to 1k hours) Various colors Good color uniformity More energy efficient than incandescent and most halogen lamps Low Voltage DC operated Instant light (less than 1ns) No UV Superior ESD protection Typical Applications Reading lights (car, bus, aircraft) Portable (flashlight, bicycle) Uplighters/Downlighters Decorative/Entertainment Bollards/Security/Garden Cove/Undershelf/Task Indoor/Outdoor Commercial and Residential Architectural Automotive Ext (Stop-Tail-Turn, CHMSL, Mirror Side Repeat) LCD backlights 1

2 Mechanical Dimensions Lambertian - Standard Star Lambertian - Low Profile Star Notes: 1. Slots in aluminum-core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Drawing not to scale. 4. All dimensions are in millimeters. 5. All dimendions without tolerances are for reference only. *The appearance and specifications of the product may be modified for improvement without notice. 2

3 Flux Characteristics at 35mA, T J = 25 C Radiation Part Number Lumious Flux Φ V (lm) Color Pattern Standard Star Low Profile Star Minimum Typical Lambertian White PG1A-1LWS PG1N-1LWS Warm White PG1A-1LVS PG1N-1LVS Green PG1A-1LGS PG1N-1LGS Blue PG1A-1LBS PG1N-1LBS Amber PG1A-1LAS PG1N-1LAS Red PG1A-1LRS PG1N-1LRS ProLight maintains a tolerance of ± 1% on flux and power measurements. Please do not drive at rated current more than 1 second without proper heat sink. Electrical Characteristics at 35mA, T J = 25 C Temperature Thermal Coefficient of Resistance Forward Voltage V F (V) Dynamic V F (mv/ C) Junction to Color Min. Typ. Max. Resistance (Ω) ΔV F / ΔT J Board ( C/ W) White Warm White Green Blue Amber Red Optical Characteristics at 35mA, T J = 25 C Temperature Coefficient of Total Dominant Wavelength λ D, Spectral Dominant included Viewing or Color Temperature CCT Half-width Wavelength Angle Angle Radiation (nm) (nm/ C) (degrees) (degrees) Color Pattern Min. Typ. Max. Δλ 1/2 Δλ D / ΔT J θ.9v 2 θ 1/2 Lambertian White 41 K 55 K 1 K Warm White 27 K 33 K 41 K Green 52 nm 53 nm 54 nm Blue 455 nm 465 nm 475 nm Amber nm 59 nm 597 nm Red 61 nm 62 nm 631 nm ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements. ProLight maintains a tolerance of ± 5% for CCT measurements. 3

4 Absolute Maximum Ratings Parameter White/Warm White/ Green/Blue Amber/Red DC Forward Current (ma) Peak Pulsed Forward Current (ma) Average Forward Current (ma) ESD Sensitivity LED Junction Temperature ( C) Aluminum-core PCB Temperature ( C) Storage & Operating Temperature ( C) Soldering Temperature( C) to +15 ±16V HBM 26 for 5 seconds Max to +15 Photometric Luminous Flux Bin Structure Color Bin Code Minimum Photometric Flux (lm) Maximum Photometric Flux (lm) White Warm White Green Q R S T Q R S T Q R S T Blue K L M Amber Q R P 23.5 Red Q 3.6 R ProLight maintains a tolerance of ± 1% on flux and power measurements. 4

5 Color Bin White and Warm White Binning Structure Graphical Representation.48 y K 7 K Y YA 63 K 565 K WM XM WN XN W X WP WQ XP V 5 K VM VN VP 325 K 35 K 285 K 27 K 35 K MM NM 38 K PM QM M1 41 K RM N1 P1 45 K SM Q1 M R1 N Planckian TM P S1 Q MA (BBL) R NA UM TN PA S QA UN T RA SA U TP Warm White UP White x 5

6 Color Bins White Bin Structure Bin Code x y Typ. CCT Typ. CCT Bin Code x y (K) (K) T W TN WN TP WP TM WQ U WM UN X UP XN UM XP V XM VN Y VP YA VM Tolerance on each color bin (x, y) is ±.1 Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. 6

7 Color Bins Warm White Bin Structure Bin Code x y Typ. CCT Typ. CCT Bin Code x y (K) (K) M Q M Q MA QA MM QM N R N R NA RA NM RM P S P S PA SA PM SM Tolerance on each color bin (x, y) is ±.1 Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. 7

8 Dominant Wavelength Bin Structure Color Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) Green Blue A Amber Red ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements. 8

9 Color Spectrum, T J = 25 C 1. White Relative Spectral Power Distribution White Standard Eye Response Cruve Wavelength(nm) 2. Warm White Relative Spectral Power Distribution 1. Standard Eye Response Cruve Wavelength(nm) Warm White 3. Blue Green Amber Red Relative Spectral Power Distribution Blue Green Amber Red Wavelength(nm) 9

10 Light Output Characteristics Relative Light Output vs. Junction Temperature at 35mA Relative Light Output (%) White, Warm White Green Blue Junction Temperature, T J ( ) Relative Light Output (%) Red Amber Junction Temperature, T J ( ) 1

11 Forward Current Characteristics, T J = 25 C 1. Forward Voltage vs. Forward Current Average Forward Current (ma) White, Warm White, Green, Blue Average Forward Current (ma) Red, Amber Forward Voltage (V) Forward Voltage (V) 2. Forward Current vs. Normalized Relative Luminous Flux White, Warm White, Green, Blue Red, Amber Relative Luminous Flux Forward Current (ma) Relative Luminous Flux Forward Current (ma) 11

12 Ambient Temperature vs. Maximum Forward Current 1. White, Warm White, Green, Blue (T JMAX = 135 C) Forward Current (ma) Rθ J-A = 6 C/W Rθ J-A = 5 C/W Rθ J-A = 4 C/W Rθ J-A = 3 C/W Ambient Temperature ( ) 2. Red, Amber (T JMAX = 12 C) 4 Forward Current (ma) Rθ J-A = 6 C/W Rθ J-A = 5 C/W Rθ J-A = 4 C/W Rθ J-A = 3 C/W Ambient Temperature ( ) 12

13 Typical Representative Spatial Radiation Pattern Lambertian Radiation Pattern Relative Intensity (%) Angular Displacement (Degrees) 13

14 Star Tube Packaging Notes: 1. 2 pieces per tube. 2. Drawing not to scale. 3. All dimensions are in millimeters. 4. All dimendions without tolerances are for reference only. **Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing ProLight s LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 3 C and humidity less than 4% RH. 14