SPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-22 DATE July 23, 2013 WISOL. Hong, Seong-Su. User WISOL CO., LTD.

Transcription

1 SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE July 23, 2013 REVISION Preliminary WISOL Kim, Kyung-Sik Hong, Seong-Su Jeon. Hyeon Cheol ISSUED BY APPROVED BY (R&D) APPROVED BY (QC) User ISSUED BY CHECKED BY APPROVED BY WISOL CO., LTD , GAJANG-DONG, OSAN-SI, GYUNGGI-DO, KOREA,

2 A TABLE OF CONTENTS 1. REVISION HISTORY DEFINITION PRECAUTIONS OUTLINE DRAWING & DIMENSIONS MARKING PERFORMANCE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS RELIABILITY ENGINEERING SAMPLE FLOW CHART TEST ITEM & CONDITION REFLOW CONDITION RECOMMENDED PCB DIMENSIONS PACKING DIMENSIONS REELING QUANTITY TAPING STRUCTURE INNER BOX(Reel Packing) STRUCTURE OUTER BOX STRUCTURE TAPE SPECIFICATIONS RoHS DATA Page 2/20 July 23, 2013

3 1. REVISION HISTORY Preliminary July 23, 2013 All Page Make specification Page 3/20 July 23, 2013

4 2. DEFINITION 2-1. PART No. S F H G 4 0 A A No. EXPLANATION 1 2 SAW Filter Design Type 3 Center Frequency :2140.0MHz(2110 ~ 2170) Input:50ohm,Output:50ohm Package size: mm² Design Revision (02 : Molding Type) 2-2. APPLICATION : Band-Pass Filter for CDMA Rx etc () 3. PRECAUTIONS 3-1. This device should not be used in any type of fluid such as water, oil, organic solvent, etc This is a hermetic device. MSL(Moisture Sensitive Level) is the '2a' level Ultrasonic cleaning shall be avoided Isopropyl Alcohol and Ethyl Alcohol can be used for cleaning. Contact us before using other cleaning solvents than above 3-5. This is an electrostatic sensitive device. Please avoid static voltage during operation and storage Sudden change of temperature shall be avoided, deterioration of the characteristics can occur If any malfunction due to designing or manufacturing which is out of specification occurs within one year after the products have been delivered, the maker should exchange the defective products. Page 4/20 July 23, 2013

5 4. OUTLINE DRAWING & DIMENSIONS [Unit: mm] m F X O X No. Function 2, 3, 5 Ground 1 Unbalanced Input 4 Unbalanced Output Page 5/20 July 23, 2013

6 5. MARKING 5-1. m F X X m F X O X - The 1 st 2 nd character 'mf' indicates the model name of SAW Filter. - The 3 rd character 'X' indicates the year and the month of manufacture. Year Month P Q R S T U V W X Y Z a A B C 2015 D E F G H I J K L M N O 2016 P Q R S T U V W X Y Z a This rotates by the 3 years. - The 4 th character 'X' indicates Lot No This symbol indicates input pin 1. - This indicates the producing center : China, 5-3. Marking : Laser Marking Page 6/20 July 23, 2013

7 6. PERFORMANCE 6-1. MAXIMUM RATINGS CHARACTERISTICS RATINGS UNITS DC Permissive Voltage 5 V Maximum Input Power 15 dbm Operating Temperature Range -30 ~ +85 Storage Temperature Range -40 ~ +85 Page 7/20 July 23, 2013

8 6-2. ELECTRICAL CHARACTERISTICS TABLE Ta = -30 ~ +85 Item FREQUENCY RANGE [MHz] UNIT Min. SPECIFICATION Typ. (25 ) Max. Insertion Loss 2110 ~ 2170 db Inband Ripple 2110 ~ 2170 db Input VSWR 2110 ~ Output VSWR 2110 ~ DC ~ 1920 db ~ 1980 db Absolute Attenuation 2230 ~ 2300 db ~ 3000 db ~ 6000 db Termination Impedance Input: Unbalanced 50 ohm Output: Unbalanced 50 ohm TEST FIXTURE [X Ray Top View] Page 8/20 July 23, 2013

9 [db] [db] Surface Acoustic Wave Filter GRAPH 0 NearBand Frequency (GHz) 0 WideBand Frequency (GHz) Page 9/20 July 23, 2013

10 7. RELIABILITY 7-1. ENGINEERING SAMPLE FLOW CHART Initial Characteristics Electrical Parametric Preconditioning (JESD22-A113F) Temp. Drift (n=5) Thermal Shock (n=23) Board Adhesion (n=11) Low Temp. Storage (n=23) PCT (n=23) Bending Test (n=11) High Temp. Storage (n=23) Vib ration (n=23) ESD Test (n=11) Humidity Test (n=23) Drop (n=23) ESD Limit Test (n=11) Final Electrical Data (n=74) Final Electrical Data (n=92) Final Electrical Data (n=44) Page 10/20 July 23, 2013

11 7-2. TEST ITEM & CONDITION CATEGORY TEST ITEM TEST CONDITION REMARK Preconditioning hr Baking %RH 120hr Reflow Test(3times) JESD22A113F Temp. Drift description Environment Test High Temp. Storage Low Temp. Storage High Temp. High Humidity Storage hr JESD22-A103C hr JESD22-A %RH 240hr JESD22-A106B Thermal Shock -40 /30min +85 /30min, 100cycle JESD22-A106A High Temp. Operating Vibration Test (Random) %RH 96hr JESD22-A102C 20 Hz ~2000 Hz,0.053G²/Hz or 8g's RMS,15min/plane IEC Fdb Drop Test 152 cm 12times Steel floor JIG(110g~150g) IEC Mechanical Test Board Adhesion 0.5 mm /sec 1point push IEC Ue3 Bending Test 0.5 mm /sec 3times -PCB : FR4, PCB SIZE : 100*40 mm IEC Ue3 Physical Test Solder Heat Resistance static marginal test ±250V,C=100pF,R=1.5 kω,1times C=100pF,R=1.5 kω,1times(demand of customer) IEC Ue3 JESD22-A114F Page 11/20 July 23, 2013

12 8. REFLOW CONDITION 9. RECOMMENDED PCB DIMENSIONS Page 12/20 July 23, 2013

13 10. CAUTION Moisture Sensitivity Device Caution (MSL LEVEL=2a) 1. Calculated shelf life in sealed bag : 12 month at 40 and 90% relative Humidity(RH) 2. Peak package body temperature : After bag is opened, devices that will be subjected to reflow solder or other high temperature process must be (a) Mounted within : 672 hours of factory conditions 30 /60% RH, or (b) Stored per J-STD Device require bake, before mounting, if : (a) Humidity Indicator Card reads 60% when read at 23±5 (b) 3(a) or 3(b) are not met 5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure Note : Level and body temperature defined by IPC/JEDEC J-STD-020 Aluminum Pack (310mmΧ370mm) HIC(Humidity Indication Card) 10 to 60% RH Page 13/20 July 23, 2013

14 11. PACKING DIMENSIONS - Carrier Tape [Unit: mm] A B D0 D1 E F P0 P1 P2 t1 t2 W Ø 1.50 Ø Reel [Unit: mm] A B C D E F G H t1 t2 W Ø Ø 81.0 Ø The product shall be packed properly not to damaged during transportation and storage. Page 14/20 July 23, 2013

15 m F X O X m F X O X Surface Acoustic Wave Filter REELING QUANTITY 10 inch reel : 10,000 pcs/reel TAPING STRUCTURE The tape shall be wound around the reel in direction shown below BAR CODE LABEL 1 MODEL NAME BARCODE 2 SFH836AQ101 3 RLYC / qafyu Model Name Reel number Quantity / Marking Page 15/20 July 23, 2013

16 Leader part and vacant position specifications INNER BOX(Reel Packing) STRUCTURE Material: Polycarbonate Material: Polyethylene + Aluminium Size: mm 2 Material: Paper Size: (D)260 (W)37 (H)265mm 3 Page 16/20 July 23, 2013

17 11-5. OUTER BOX STRUCTURE Material : Paper TYPE SIZE(mm) a b c Inner Box # A boxes SIDE 1 SIDE 2 - SIDE is the same as front side. Page 17/20 July 23, 2013

18 12. TAPE SPECIFICATIONS Tensile Strength of Carrier Tape: 4.4N/mm width Top Cover Tape Adhesion (See the below figure) - pull of angle: 0~15 degree - speed: 300mm/min. - force: 20~70g Page 18/20 July 23, 2013

19 13. RoHS DATA Page 19/20 July 23, 2013

20 Page 20/20 July 23, 2013