DESAIN EKSPERIMEN BLOCKING FACTORS. Semester Genap 2017/2018 Jurusan Teknik Industri Universitas Brawijaya
|
|
- Joy Lee
- 5 years ago
- Views:
Transcription
1 DESAIN EKSPERIMEN BLOCKING FACTORS Semester Genap Jurusan Teknik Industri Universitas Brawijaya
2 Outline The Randomized Complete Block Design The Latin Square Design The Graeco-Latin Square Design Balanced Incomplete Block Design 2/33 28/02/18
3 The Randomized Complete Block Design In some experiment, the variability may arise from factors that we are not interested in. A nuisance factor is a factor that probably has some effect on the response, but it s of no interest to the experimenter however, the variability it transmits to the response needs to be minimized These nuisance factor could be unknown and uncontrolled à use randomization 328/02/18
4 The Randomized Complete Block Design If the nuisance factor are known but uncontrollable à use the analysis of covariance. If the nuisance factor are known but controllable à use the blocking technique Typical nuisance factors include batches of raw material, operators, pieces of test equipment, time (shifts, days, etc.), different experimental units 428/02/18
5 The Randomized Complete Block Design Many industrial experiments involve blocking (or should) Failure to block is a common flaw in designing an experiment (consequences?) 528/02/18
6 The Randomized Complete Block Design-example We wish determine whether or not four different tips produce different readings on a hardness testing machine. One factor to be consider à tip type Completely Randomized Design could be used with one potential problem à the testing block could be different The experiment error could include both the random and coupon errors. 628/02/18
7 The Randomized Complete Block Design-example To reduce the error from testing coupon, randomize complete block design(rcbd) is used 728/02/18
8 The Randomized Complete Block Design-example Each coupon is called a block ; that is, it s a more homogenous experimental unit on which to test the tips complete indicates each testing coupon (BLOCK) contains all treatments Variability between blocks can be large, variability within a block should be relatively small In general, a block is a specific level of the nuisance factor 828/02/18
9 The Randomized Complete Block Design-example A complete replicate of the basic experiment is conducted in each block A block represents a restriction on randomization All runs within a block are randomized Once again, we are interested in testing the equality of treatment means, but now we have to remove the variability associated with the nuisance factor (the blocks) 928/02/18
10 The Randomized Complete Block Design Extension from ANOVA Suppose that there are a treatments (factor levels) and b blocks 10 28/02/18
11 The Randomized Complete Block Design Extension from ANOVA Suppose that there are a treatments (factor levels) and b blocks y H i = 1,2,..., a = µ + τ + β + ε j = 1,2,..., b ij i j ij : µ = µ = L = µ where µ = (1/ b) ( µ + τ + β ) = µ + τ a i j= 1 i j i b 11 28/02/18
12 A statistical model (effects model) for the RCBD is y i= 1, 2,..., a = µ + τ + β + ε j = 1, 2,..., b ij i j ij The relevant (fixed effects) hypotheses are H The Randomized Complete Block Design Extension from ANOVA : µ = µ = L = µ where µ = (1/ b) ( µ + τ + β ) = µ + τ a i j= 1 i j i H : at least one µ µ 1 i j b 12 28/02/18
13 The Randomized Complete Block Design Extension from ANOVA Or H H 0 1 : τ = τ =! = τ 1 2 : at least oneτ 0 i a = /02/18
14 The Randomized Complete Block Design Extension from ANOVA Partitioning the total variability a b a b 2 yij y.. = yi. y.. + y. j y.. i= 1 j= 1 i= 1 j= 1 ( ) [( ) ( ) + ( y y y + y )] ij i.. j.. a b 2 2 (...) i (. j..) i= 1 j= 1 = b y y + a y y a b + ( y y y + y ) i= 1 j= 1 ij i.. j.. SS = SS + SS + SS T Treatments Blocks E /02/18
15 The Randomized Complete Block The degrees of freedom for the sums of squares in SS = SS + SS + SS T Treatments Blocks E are as follows: Design Extension from ANOVA ab 1= a 1+ b 1 + ( a 1)( b 1) Therefore, ratios of sums of squares to their degrees of freedom result in mean squares and the ratio of the mean square for treatments to the error mean square is an F statistic that can be used to test the hypothesis of equal treatment means 15 28/02/18
16 The Randomized Complete Block Design Extension from ANOVA Mean squares E E E ( MS ) treatment ( MS ) Block 2 ( MS ) = σ E 2 = σ 2 = σ + + a b a i= 1 a i= 1 β b 1 τ 2 j 2 i a /02/18
17 The Randomized Complete Block F-test with (a-1), (a-1)(b-1) degree of freedom F = 0 Design Extension from ANOVA MS MS Treatments Reject the null hypothesis if F 0 >F α,a-1,(a-1)(b-1) E 17 28/02/18
18 The Randomized Complete Block ANOVA Table Design Extension from ANOVA 28/02/18
19 The Randomized Complete Block Design Extension from ANOVA Manual computing: 19
20 The Randomized Complete Block Design Extension from ANOVA Meaning of F0=MSBlocks/MSE? The randomization in RBCD is applied only to treatment within blocks The Block represents a restriction on randomization Two kinds of controversial theories 20
21 The Randomized Complete Block Design Extension from ANOVA Meaning of F0=MSBlocks/MSE? General practice, the block factor has a large effect and the noise reduction obtained by blocking was probably helpful in improving the precision of the comparison of treatment means if the ration is large 21
22 The Randomized Complete Block Design Example 22
23 The Randomized Complete Block Design Example To conduct this experiment as a RCBD, assign all 4 pressures to each of the 6 batches of resin Each batch of resin is called a block ; that is, it s a more homogenous experimental unit on which to test the extrusion pressures 23 28/02/18
24 Vascular-Graft.MTW The Randomized Complete Block Design Example Minitab StatàANOVAàTwo-way Two-way ANOVA: Yield versus Pressure, Batch Source DF SS MS F P Pressure Batch Error Total S = R-Sq = 77.12% R-Sq(adj) = 64.92% 24
25 Vascular-Graft.MTW The Randomized Complete Block Design Example Minitab 25
26 The Randomized Complete Block Design Example Residual Analysis Basic residual plots indicate that normality, constant variance assumptions are satisfied No obvious problems with randomization No patterns in the residuals vs. block Can also plot residuals versus the pressure (residuals by factor) These plots provide more information about the constant variance assumption, possible outliers 26 28/02/18
27 Vascular-Graft.MTW The Randomized Complete Block Design Example Minitab 27
28 Vascular-Graft.MTW The Randomized Complete Block Design Example No Blocking StatàANOVAàOne-way One-way ANOVA: Yield versus Pressure Source DF SS MS F P Pressure Error Total S = R-Sq = 37.10% R-Sq(adj) = 27.66% 28
29 Vascular-Graft.MTW The Randomized Complete Block Design Example No Blocking-Residual 29
30 The Randomized Complete Block Design Other Aspects The RCBD utilizes an additive model no interaction between treatments and blocks i= 1, 2,..., a yij = µ + τi + β j + εij j = 1, 2,..., b Treatments and/or blocks as random effects Missing values What are the consequences of not blocking if we should have? 28/02/18 30
31 The Randomized Complete Block Design Other Aspects Sample sizing in the RCBD? The OC curve approach can be used to determine the number of blocks to run..see page 133 y i= 1, 2,..., a = µ + τ + β + ε j = 1, 2,..., b ij i j ij 28/02/18 31
32 The Latin Square Design These designs are used to simultaneously control (or eliminate) two sources of nuisance variability Those two sources of nuisance factors have exactly same levels of factor to be considered A significant assumption is that the three factors (treatments, nuisance factors) do not interact If this assumption is violated, the Latin square design will not produce valid results Latin squares are not used as much as the RCBD in industrial experimentation 32 28/02/18
33 The Latin Square Design The Latin square design systematically allows blocking in two directions In general, a Latin square for p factors is a square containing p rows and p columns. Each cell contain one and only one of p letters that represent the treatments /02/18
34 A Latin Square Design The Rocket Propellant This is a 5 5 Latin square design 34
35 Statistical Analysis of the Latin Square Design The statistical (effects) model is i= 1, 2,..., p yijk = µ + αi + τ j + βk + εijk j = 1, 2,..., p k = 1, 2,..., p The statistical analysis (ANOVA) is much like the analysis for the RCBD /02/18
36 Statistical Analysis of the Latin Square Design 36
37 Statistical Analysis of the Latin Square Design 37
38 The Standard Latin Square Design A square with first row and column in alphabetical order /02/18
39 Other Topics Missing values in blocked designs RCBD Latin square Estimated by y ijk = p( y ' i.. + ( p y '. j. + y 1)( p '.. k ) 2y 1) ' /02/18
40 Other Topics Replication of Latin Squares To increase the error degrees of freedom Three methods 1. Use the same batches and operators in each replicate 2. Use the same batches but different operators in each replicate 3. Use different batches and different operator 40 28/02/18
41 Other Topics Replication of Latin Squares ANOVA in Case /02/18
42 Other Topics Replication of Latin Squares ANOVA n Case /02/18
43 Other Topics Replication of Latin Squares ANOVA n Case /02/18
44 Other Topics Crossover design p treatments to be tested in p time periods using np experiment units. Ex : 20 subjects to be assigned to two periods First half of the subjects are assigned to period 1 (in random) and the other half are assigned to period 2. Take turn after experiments are done /02/18
45 Crossover design ANOVA Other Topics 45 28/02/18
46 Graeco-Latin Square For a pxp Latin square, one can superimpose a second pxp Latin square that treatments are denoted by Greek letters /02/18
47 Graeco-Latin Square If the two squares have the property that each Greek letter appears once and only once with each Latin letter, the two Latin squares are to be orthogonal and this design is named as Graeco-Latin Square. It can control three sources of extraneous variability /02/18
48 ANOVA Graeco-Latin Square 48 28/02/18
49 Graeco-Latin Square --Example In the rocket propellant problem, batch of material, operators, and test assemblies are important. If 5 of them are considered, a Graeco-Latn square can be used /02/18
50 Graeco-Latin Square --Example 50 28/02/18
51 Graeco-Latin Square --Example 51 28/02/18
Chapter 4: Randomized Blocks and Latin Squares
Chapter 4: Randomized Blocks and Latin Squares 1 Design of Engineering Experiments The Blocking Principle Blocking and nuisance factors The randomized complete block design or the RCBD Extension of the
More informationRandomized Blocks, Latin Squares, and Related Designs. Dr. Mohammad Abuhaiba 1
Randomized Blocks, Latin Squares, and Related Designs Dr. Mohammad Abuhaiba 1 HomeWork Assignment Due Sunday 2/5/2010 Solve the following problems at the end of chapter 4: 4-1 4-7 4-12 4-14 4-16 Dr. Mohammad
More informationDESAIN EKSPERIMEN Analysis of Variances (ANOVA) Semester Genap 2017/2018 Jurusan Teknik Industri Universitas Brawijaya
DESAIN EKSPERIMEN Analysis of Variances (ANOVA) Semester Jurusan Teknik Industri Universitas Brawijaya Outline Introduction The Analysis of Variance Models for the Data Post-ANOVA Comparison of Means Sample
More informationChapter 4 Experiments with Blocking Factors
Chapter 4 Experiments with Blocking Factors 許湘伶 Design and Analysis of Experiments (Douglas C. Montgomery) hsuhl (NUK) DAE Chap. 4 1 / 54 The Randomized Complete Block Design (RCBD; 隨機化完全集區設計 ) 1 Variability
More informationFactorial designs. Experiments
Chapter 5: Factorial designs Petter Mostad mostad@chalmers.se Experiments Actively making changes and observing the result, to find causal relationships. Many types of experimental plans Measuring response
More informationLecture 7: Latin Square and Related Design
Lecture 7: Latin Square and Related Design Montgomery: Section 4.2-4.3 Page 1 Automobile Emission Experiment Four cars and four drivers are employed in a study for possible differences between four gasoline
More informationAssignment 6 Answer Keys
ssignment 6 nswer Keys Problem 1 (a) The treatment sum of squares can be calculated by SS Treatment = b a ȳi 2 Nȳ 2 i=1 = 5 (5.40 2 + 5.80 2 + 10 2 + 9.80 2 ) 20 7.75 2 = 92.95 Then the F statistic for
More informationContents. TAMS38 - Lecture 6 Factorial design, Latin Square Design. Lecturer: Zhenxia Liu. Factorial design 3. Complete three factor design 4
Contents Factorial design TAMS38 - Lecture 6 Factorial design, Latin Square Design Lecturer: Zhenxia Liu Department of Mathematics - Mathematical Statistics 28 November, 2017 Complete three factor design
More informationCOMPLETELY RANDOM DESIGN (CRD) -Design can be used when experimental units are essentially homogeneous.
COMPLETELY RANDOM DESIGN (CRD) Description of the Design -Simplest design to use. -Design can be used when experimental units are essentially homogeneous. -Because of the homogeneity requirement, it may
More informationUnit 6: Orthogonal Designs Theory, Randomized Complete Block Designs, and Latin Squares
Unit 6: Orthogonal Designs Theory, Randomized Complete Block Designs, and Latin Squares STA 643: Advanced Experimental Design Derek S. Young 1 Learning Objectives Understand the basics of orthogonal designs
More informationResidual Analysis for two-way ANOVA The twoway model with K replicates, including interaction,
Residual Analysis for two-way ANOVA The twoway model with K replicates, including interaction, is Y ijk = µ ij + ɛ ijk = µ + α i + β j + γ ij + ɛ ijk with i = 1,..., I, j = 1,..., J, k = 1,..., K. In carrying
More informationMultiple comparisons - subsequent inferences for two-way ANOVA
1 Multiple comparisons - subsequent inferences for two-way ANOVA the kinds of inferences to be made after the F tests of a two-way ANOVA depend on the results if none of the F tests lead to rejection of
More informationRCB - Example. STA305 week 10 1
RCB - Example An accounting firm wants to select training program for its auditors who conduct statistical sampling as part of their job. Three training methods are under consideration: home study, presentations
More informationVladimir Spokoiny Design of Experiments in Science and Industry
W eierstraß-institut für Angew andte Analysis und Stochastik Vladimir Spokoiny Design of Experiments in Science and Industry www.ndt.net/index.php?id=8310 Mohrenstr. 39, 10117 Berlin spokoiny@wias-berlin.de
More informationLec 1: An Introduction to ANOVA
Ying Li Stockholm University October 31, 2011 Three end-aisle displays Which is the best? Design of the Experiment Identify the stores of the similar size and type. The displays are randomly assigned to
More informationChapter 4 Randomized Blocks, Latin Squares, and Related Designs Solutions
Solutions from Montgomery, D. C. (008) Design and Analysis of Experiments, Wiley, NY Chapter 4 Randomized Blocks, Latin Squares, and Related Designs Solutions 4.. The ANOVA from a randomized complete block
More informationAllow the investigation of the effects of a number of variables on some response
Lecture 12 Topic 9: Factorial treatment structures (Part I) Factorial experiments Allow the investigation of the effects of a number of variables on some response in a highly efficient manner, and in a
More informationLec 5: Factorial Experiment
November 21, 2011 Example Study of the battery life vs the factors temperatures and types of material. A: Types of material, 3 levels. B: Temperatures, 3 levels. Example Study of the battery life vs the
More informationSociology 6Z03 Review II
Sociology 6Z03 Review II John Fox McMaster University Fall 2016 John Fox (McMaster University) Sociology 6Z03 Review II Fall 2016 1 / 35 Outline: Review II Probability Part I Sampling Distributions Probability
More informationTopic 6. Two-way designs: Randomized Complete Block Design [ST&D Chapter 9 sections 9.1 to 9.7 (except 9.6) and section 15.8]
Topic 6. Two-way designs: Randomized Complete Block Design [ST&D Chapter 9 sections 9.1 to 9.7 (except 9.6) and section 15.8] The completely randomized design Treatments are randomly assigned to e.u. such
More informationChapter 5 Introduction to Factorial Designs Solutions
Solutions from Montgomery, D. C. (1) Design and Analysis of Experiments, Wiley, NY Chapter 5 Introduction to Factorial Designs Solutions 5.1. The following output was obtained from a computer program that
More informationUnit 12: Analysis of Single Factor Experiments
Unit 12: Analysis of Single Factor Experiments Statistics 571: Statistical Methods Ramón V. León 7/16/2004 Unit 12 - Stat 571 - Ramón V. León 1 Introduction Chapter 8: How to compare two treatments. Chapter
More informationOrthogonal contrasts for a 2x2 factorial design Example p130
Week 9: Orthogonal comparisons for a 2x2 factorial design. The general two-factor factorial arrangement. Interaction and additivity. ANOVA summary table, tests, CIs. Planned/post-hoc comparisons for the
More informationDesign & Analysis of Experiments 7E 2009 Montgomery
1 What If There Are More Than Two Factor Levels? The t-test does not directly apply ppy There are lots of practical situations where there are either more than two levels of interest, or there are several
More information3. Factorial Experiments (Ch.5. Factorial Experiments)
3. Factorial Experiments (Ch.5. Factorial Experiments) Hae-Jin Choi School of Mechanical Engineering, Chung-Ang University DOE and Optimization 1 Introduction to Factorials Most experiments for process
More informationLecture 7: Latin Squares and Related Designs
Lecture 7: Latin Squares and Related Designs Montgomery: Section 4.2 and 4.3 1 Lecture 7 Page 1 Automobile Emission Experiment Four cars and four drivers are employed in a study of four gasoline additives(a,b,c,
More information44.2. Two-Way Analysis of Variance. Introduction. Prerequisites. Learning Outcomes
Two-Way Analysis of Variance 44 Introduction In the one-way analysis of variance (Section 441) we consider the effect of one factor on the values taken by a variable Very often, in engineering investigations,
More informationTopic 9: Factorial treatment structures. Introduction. Terminology. Example of a 2x2 factorial
Topic 9: Factorial treatment structures Introduction A common objective in research is to investigate the effect of each of a number of variables, or factors, on some response variable. In earlier times,
More informationW&M CSCI 688: Design of Experiments Homework 2. Megan Rose Bryant
W&M CSCI 688: Design of Experiments Homework 2 Megan Rose Bryant September 25, 201 3.5 The tensile strength of Portland cement is being studied. Four different mixing techniques can be used economically.
More informationThe One-Way Repeated-Measures ANOVA. (For Within-Subjects Designs)
The One-Way Repeated-Measures ANOVA (For Within-Subjects Designs) Logic of the Repeated-Measures ANOVA The repeated-measures ANOVA extends the analysis of variance to research situations using repeated-measures
More informationAnalysis of Covariance. The following example illustrates a case where the covariate is affected by the treatments.
Analysis of Covariance In some experiments, the experimental units (subjects) are nonhomogeneous or there is variation in the experimental conditions that are not due to the treatments. For example, a
More informationSTAT Final Practice Problems
STAT 48 -- Final Practice Problems.Out of 5 women who had uterine cancer, 0 claimed to have used estrogens. Out of 30 women without uterine cancer 5 claimed to have used estrogens. Exposure Outcome (Cancer)
More informationSTAT22200 Spring 2014 Chapter 13B
STAT22200 Spring 2014 Chapter 13B Yibi Huang May 27, 2014 13.3.1 Crossover Designs 13.3.4 Replicated Latin Square Designs 13.4 Graeco-Latin Squares Chapter 13B - 1 13.3.1 Crossover Design (A Special Latin-Square
More informationTwo-Way Analysis of Variance - no interaction
1 Two-Way Analysis of Variance - no interaction Example: Tests were conducted to assess the effects of two factors, engine type, and propellant type, on propellant burn rate in fired missiles. Three engine
More informationCh 2: Simple Linear Regression
Ch 2: Simple Linear Regression 1. Simple Linear Regression Model A simple regression model with a single regressor x is y = β 0 + β 1 x + ɛ, where we assume that the error ɛ is independent random component
More information2.830J / 6.780J / ESD.63J Control of Manufacturing Processes (SMA 6303) Spring 2008
MIT OpenCourseWare http://ocw.mit.edu 2.830J / 6.780J / ESD.63J Control of Processes (SMA 6303) Spring 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.
More informationChapter 12. Analysis of variance
Serik Sagitov, Chalmers and GU, January 9, 016 Chapter 1. Analysis of variance Chapter 11: I = samples independent samples paired samples Chapter 1: I 3 samples of equal size J one-way layout two-way layout
More information1 Use of indicator random variables. (Chapter 8)
1 Use of indicator random variables. (Chapter 8) let I(A) = 1 if the event A occurs, and I(A) = 0 otherwise. I(A) is referred to as the indicator of the event A. The notation I A is often used. 1 2 Fitting
More information21.0 Two-Factor Designs
21.0 Two-Factor Designs Answer Questions 1 RCBD Concrete Example Two-Way ANOVA Popcorn Example 21.4 RCBD 2 The Randomized Complete Block Design is also known as the two-way ANOVA without interaction. A
More informationOne-way ANOVA. Experimental Design. One-way ANOVA
Method to compare more than two samples simultaneously without inflating Type I Error rate (α) Simplicity Few assumptions Adequate for highly complex hypothesis testing 09/30/12 1 Outline of this class
More informationDr. Shalabh Department of Mathematics and Statistics Indian Institute of Technology Kanpur
nalysis of Variance and Design of Experiment-I MODULE V LECTURE - 9 FCTORIL EXPERIMENTS Dr. Shalabh Department of Mathematics and Statistics Indian Institute of Technology Kanpur Sums of squares Suppose
More informationStat 6640 Solution to Midterm #2
Stat 6640 Solution to Midterm #2 1. A study was conducted to examine how three statistical software packages used in a statistical course affect the statistical competence a student achieves. At the end
More informationChapter 5 Introduction to Factorial Designs
Chapter 5 Introduction to Factorial Designs 5. Basic Definitions and Principles Stud the effects of two or more factors. Factorial designs Crossed: factors are arranged in a factorial design Main effect:
More informationIncomplete Block Designs
Incomplete Block Designs Recall: in randomized complete block design, each of a treatments was used once within each of b blocks. In some situations, it will not be possible to use each of a treatments
More informationDr. Shalabh Department of Mathematics and Statistics Indian Institute of Technology Kanpur
Analysis of Variance and Design of Experiment-I MODULE IX LECTURE - 38 EXERCISES Dr. Shalabh Department of Mathematics and Statistics Indian Institute of Technology Kanpur Example (Completely randomized
More informationSleep data, two drugs Ch13.xls
Model Based Statistics in Biology. Part IV. The General Linear Mixed Model.. Chapter 13.3 Fixed*Random Effects (Paired t-test) ReCap. Part I (Chapters 1,2,3,4), Part II (Ch 5, 6, 7) ReCap Part III (Ch
More informationOne-Way Analysis of Variance (ANOVA)
1 One-Way Analysis of Variance (ANOVA) One-Way Analysis of Variance (ANOVA) is a method for comparing the means of a populations. This kind of problem arises in two different settings 1. When a independent
More informationDesign of Engineering Experiments Chapter 5 Introduction to Factorials
Design of Engineering Experiments Chapter 5 Introduction to Factorials Text reference, Chapter 5 page 170 General principles of factorial experiments The two-factor factorial with fixed effects The ANOVA
More informationOne-Way Analysis of Variance. With regression, we related two quantitative, typically continuous variables.
One-Way Analysis of Variance With regression, we related two quantitative, typically continuous variables. Often we wish to relate a quantitative response variable with a qualitative (or simply discrete)
More information22s:152 Applied Linear Regression. Take random samples from each of m populations.
22s:152 Applied Linear Regression Chapter 8: ANOVA NOTE: We will meet in the lab on Monday October 10. One-way ANOVA Focuses on testing for differences among group means. Take random samples from each
More informationFigure 9.1: A Latin square of order 4, used to construct four types of design
152 Chapter 9 More about Latin Squares 9.1 Uses of Latin squares Let S be an n n Latin square. Figure 9.1 shows a possible square S when n = 4, using the symbols 1, 2, 3, 4 for the letters. Such a Latin
More informationAnalysis of Variance. ภาว น ศ ร ประภาน ก ล คณะเศรษฐศาสตร มหาว ทยาล ยธรรมศาสตร
Analysis of Variance ภาว น ศ ร ประภาน ก ล คณะเศรษฐศาสตร มหาว ทยาล ยธรรมศาสตร pawin@econ.tu.ac.th Outline Introduction One Factor Analysis of Variance Two Factor Analysis of Variance ANCOVA MANOVA Introduction
More informationTopic 7: Incomplete, double-blocked designs: Latin Squares [ST&D sections ]
Topic 7: Incomplete, double-blocked designs: Latin Squares [ST&D sections 9.10 9.15] 7.1. Introduction The Randomized Complete Block Design is commonly used to improve the ability of an experiment to detect
More informationDesign and Analysis of Experiments Prof. Jhareswar Maiti Department of Industrial and Systems Engineering Indian Institute of Technology, Kharagpur
Design and Analysis of Experiments Prof. Jhareswar Maiti Department of Industrial and Systems Engineering Indian Institute of Technology, Kharagpur Lecture 26 Randomized Complete Block Design (RCBD): Estimation
More information22s:152 Applied Linear Regression. There are a couple commonly used models for a one-way ANOVA with m groups. Chapter 8: ANOVA
22s:152 Applied Linear Regression Chapter 8: ANOVA NOTE: We will meet in the lab on Monday October 10. One-way ANOVA Focuses on testing for differences among group means. Take random samples from each
More informationOHSU OGI Class ECE-580-DOE :Design of Experiments Steve Brainerd
Why We Use Analysis of Variance to Compare Group Means and How it Works The question of how to compare the population means of more than two groups is an important one to researchers. Let us suppose that
More informationPower & Sample Size Calculation
Chapter 7 Power & Sample Size Calculation Yibi Huang Chapter 7 Section 10.3 Power & Sample Size Calculation for CRDs Power & Sample Size for Factorial Designs Chapter 7-1 Power & Sample Size Calculation
More informationThe legacy of Sir Ronald A. Fisher. Fisher s three fundamental principles: local control, replication, and randomization.
1 Chapter 1: Research Design Principles The legacy of Sir Ronald A. Fisher. Fisher s three fundamental principles: local control, replication, and randomization. 2 Chapter 2: Completely Randomized Design
More informationLecture 6: Single-classification multivariate ANOVA (k-group( MANOVA)
Lecture 6: Single-classification multivariate ANOVA (k-group( MANOVA) Rationale and MANOVA test statistics underlying principles MANOVA assumptions Univariate ANOVA Planned and unplanned Multivariate ANOVA
More information1. Least squares with more than one predictor
Statistics 1 Lecture ( November ) c David Pollard Page 1 Read M&M Chapter (skip part on logistic regression, pages 730 731). Read M&M pages 1, for ANOVA tables. Multiple regression. 1. Least squares with
More informationIn a one-way ANOVA, the total sums of squares among observations is partitioned into two components: Sums of squares represent:
Activity #10: AxS ANOVA (Repeated subjects design) Resources: optimism.sav So far in MATH 300 and 301, we have studied the following hypothesis testing procedures: 1) Binomial test, sign-test, Fisher s
More information3. (a) (8 points) There is more than one way to correctly express the null hypothesis in matrix form. One way to state the null hypothesis is
Stat 501 Solutions and Comments on Exam 1 Spring 005-4 0-4 1. (a) (5 points) Y ~ N, -1-4 34 (b) (5 points) X (X,X ) = (5,8) ~ N ( 11.5, 0.9375 ) 3 1 (c) (10 points, for each part) (i), (ii), and (v) are
More informationConfidence Interval for the mean response
Week 3: Prediction and Confidence Intervals at specified x. Testing lack of fit with replicates at some x's. Inference for the correlation. Introduction to regression with several explanatory variables.
More informationChapter 4 Randomized Blocks, Latin Squares, and Related Designs Solutions
Solutions from Montgomery, D. C. (008) Design and Analysis of Exeriments, Wiley, NY Chater 4 Randomized Blocks, Latin Squares, and Related Designs Solutions 4.. The ANOVA from a randomized comlete block
More informationQUEEN MARY, UNIVERSITY OF LONDON
QUEEN MARY, UNIVERSITY OF LONDON MTH634 Statistical Modelling II Solutions to Exercise Sheet 4 Octobe07. We can write (y i. y.. ) (yi. y i.y.. +y.. ) yi. y.. S T. ( Ti T i G n Ti G n y i. +y.. ) G n T
More informationDesign & Analysis of Experiments 7E 2009 Montgomery
Chapter 5 1 Introduction to Factorial Design Study the effects of 2 or more factors All possible combinations of factor levels are investigated For example, if there are a levels of factor A and b levels
More informationSummary of Chapter 7 (Sections ) and Chapter 8 (Section 8.1)
Summary of Chapter 7 (Sections 7.2-7.5) and Chapter 8 (Section 8.1) Chapter 7. Tests of Statistical Hypotheses 7.2. Tests about One Mean (1) Test about One Mean Case 1: σ is known. Assume that X N(µ, σ
More informationSchool of Mathematical Sciences. Question 1
School of Mathematical Sciences MTH5120 Statistical Modelling I Practical 8 and Assignment 7 Solutions Question 1 Figure 1: The residual plots do not contradict the model assumptions of normality, constant
More informationIX. Complete Block Designs (CBD s)
IX. Complete Block Designs (CBD s) A.Background Noise Factors nuisance factors whose values can be controlled within the context of the experiment but not outside the context of the experiment Covariates
More informationThese are multifactor experiments that have
Design of Engineering Experiments Nested Designs Text reference, Chapter 14, Pg. 525 These are multifactor experiments that have some important industrial applications Nested and split-plot designs frequently
More informationMore about Single Factor Experiments
More about Single Factor Experiments 1 2 3 0 / 23 1 2 3 1 / 23 Parameter estimation Effect Model (1): Y ij = µ + A i + ɛ ij, Ji A i = 0 Estimation: µ + A i = y i. ˆµ = y..  i = y i. y.. Effect Modell
More informationPLSC PRACTICE TEST ONE
PLSC 724 - PRACTICE TEST ONE 1. Discuss briefly the relationship between the shape of the normal curve and the variance. 2. What is the relationship between a statistic and a parameter? 3. How is the α
More informationLINEAR REGRESSION ANALYSIS. MODULE XVI Lecture Exercises
LINEAR REGRESSION ANALYSIS MODULE XVI Lecture - 44 Exercises Dr. Shalabh Department of Mathematics and Statistics Indian Institute of Technology Kanpur Exercise 1 The following data has been obtained on
More informationI i=1 1 I(J 1) j=1 (Y ij Ȳi ) 2. j=1 (Y j Ȳ )2 ] = 2n( is the two-sample t-test statistic.
Serik Sagitov, Chalmers and GU, February, 08 Solutions chapter Matlab commands: x = data matrix boxplot(x) anova(x) anova(x) Problem.3 Consider one-way ANOVA test statistic For I = and = n, put F = MS
More information28. SIMPLE LINEAR REGRESSION III
28. SIMPLE LINEAR REGRESSION III Fitted Values and Residuals To each observed x i, there corresponds a y-value on the fitted line, y = βˆ + βˆ x. The are called fitted values. ŷ i They are the values of
More informationUnit 8: A Mixed Two-Factor Design
Minitab Notes for STAT 6305 Dept. of Statistics CSU East Bay Unit 8: A Mixed Two-Factor Design 8.1. The Data We use data quoted in Brownlee: Statistical Theory and Methodology in Science and Engineering,
More informationCHAPTER 4 Analysis of Variance. One-way ANOVA Two-way ANOVA i) Two way ANOVA without replication ii) Two way ANOVA with replication
CHAPTER 4 Analysis of Variance One-way ANOVA Two-way ANOVA i) Two way ANOVA without replication ii) Two way ANOVA with replication 1 Introduction In this chapter, expand the idea of hypothesis tests. We
More informationAnalysis of Variance: Part 1
Analysis of Variance: Part 1 Oneway ANOVA When there are more than two means Each time two means are compared the probability (Type I error) =α. When there are more than two means Each time two means are
More informationChapter 13 Experiments with Random Factors Solutions
Solutions from Montgomery, D. C. (01) Design and Analysis of Experiments, Wiley, NY Chapter 13 Experiments with Random Factors Solutions 13.. An article by Hoof and Berman ( Statistical Analysis of Power
More information(1) The explanatory or predictor variables may be qualitative. (We ll focus on examples where this is the case.)
Introduction to Analysis of Variance Analysis of variance models are similar to regression models, in that we re interested in learning about the relationship between a dependent variable (a response)
More informationBlocks are formed by grouping EUs in what way? How are experimental units randomized to treatments?
VI. Incomplete Block Designs A. Introduction What is the purpose of block designs? Blocks are formed by grouping EUs in what way? How are experimental units randomized to treatments? 550 What if we have
More informationChap The McGraw-Hill Companies, Inc. All rights reserved.
11 pter11 Chap Analysis of Variance Overview of ANOVA Multiple Comparisons Tests for Homogeneity of Variances Two-Factor ANOVA Without Replication General Linear Model Experimental Design: An Overview
More informationNote: The problem numbering below may not reflect actual numbering in DGE.
Stat664 Year 1999 DGE Note: The problem numbering below may not reflect actual numbering in DGE. 1. For a balanced one-way random effect model, (a) write down the model and assumptions; (b) write down
More informationStat 502 Design and Analysis of Experiments General Linear Model
1 Stat 502 Design and Analysis of Experiments General Linear Model Fritz Scholz Department of Statistics, University of Washington December 6, 2013 2 General Linear Hypothesis We assume the data vector
More informationIntroduction to the Design and Analysis of Experiments
Introduction to the Design and Analysis of Experiments Geoffrey M. Clarke, MA,Dip.stats.,c.stat. Honorary Reader in Applied Statistics, University of Kent at Canterbury and Consultant to the Applied Statistics
More informationINFERENCE FOR REGRESSION
CHAPTER 3 INFERENCE FOR REGRESSION OVERVIEW In Chapter 5 of the textbook, we first encountered regression. The assumptions that describe the regression model we use in this chapter are the following. We
More informationAnalysis of Variance
Analysis of Variance Blood coagulation time T avg A 62 60 63 59 61 B 63 67 71 64 65 66 66 C 68 66 71 67 68 68 68 D 56 62 60 61 63 64 63 59 61 64 Blood coagulation time A B C D Combined 56 57 58 59 60 61
More informationAdvanced Experimental Design
Advanced Experimental Design Topic 8 Chapter : Repeated Measures Analysis of Variance Overview Basic idea, different forms of repeated measures Partialling out between subjects effects Simple repeated
More informationCONTENTS PREFACE XI ABOUT THE AUTHOR XIII. CHAPTER 1 Research Strategies and the Control of Nuisance Variables 1
CONTENTS PREFACE XI ABOUT THE AUTHOR XIII CHAPTER 1 Research Strategies and the Control of Nuisance Variables 1 1.1 Introduction 1 1.2 Formulation of Plans for the Collection and Analysis of Data 2 1.3
More information(ii) Scan your answer sheets INTO ONE FILE only, and submit it in the drop-box.
FINAL EXAM ** Two different ways to submit your answer sheet (i) Use MS-Word and place it in a drop-box. (ii) Scan your answer sheets INTO ONE FILE only, and submit it in the drop-box. Deadline: December
More informationContents. TAMS38 - Lecture 8 2 k p fractional factorial design. Lecturer: Zhenxia Liu. Example 0 - continued 4. Example 0 - Glazing ceramic 3
Contents TAMS38 - Lecture 8 2 k p fractional factorial design Lecturer: Zhenxia Liu Department of Mathematics - Mathematical Statistics Example 0 2 k factorial design with blocking Example 1 2 k p fractional
More informationWhat is Experimental Design?
One Factor ANOVA What is Experimental Design? A designed experiment is a test in which purposeful changes are made to the input variables (x) so that we may observe and identify the reasons for change
More informationStat/F&W Ecol/Hort 572 Review Points Ané, Spring 2010
1 Linear models Y = Xβ + ɛ with ɛ N (0, σ 2 e) or Y N (Xβ, σ 2 e) where the model matrix X contains the information on predictors and β includes all coefficients (intercept, slope(s) etc.). 1. Number of
More informationLecture 15 Topic 11: Unbalanced Designs (missing data)
Lecture 15 Topic 11: Unbalanced Designs (missing data) In the real world, things fall apart: plants are destroyed/trampled/eaten animals get sick volunteers quit assistants are sloppy accidents happen
More informationIntroduction to Analysis of Variance (ANOVA) Part 2
Introduction to Analysis of Variance (ANOVA) Part 2 Single factor Serpulid recruitment and biofilms Effect of biofilm type on number of recruiting serpulid worms in Port Phillip Bay Response variable:
More informationY it = µ + τ i + ε it ; ε it ~ N(0, σ 2 ) (1)
DOE (Linear Model) Strategy for checking experimental model assumptions Part 1 When we discuss experiments whose data are described or analyzed by the one-way analysis of variance ANOVA model, we note
More informationWeek 3 & 4 Randomized Blocks, Latin Squares, and Related Designs
Week 3 & 4Randomized Blocks, Latin Squares, and Related Designs p 1/81 Week 3 & 4 Randomized Blocks, Latin Squares, and Related Designs Joslin Goh Simon Fraser University Week 3 & 4Randomized Blocks, Latin
More informationAnalysis of variance
Analysis of variance 1 Method If the null hypothesis is true, then the populations are the same: they are normal, and they have the same mean and the same variance. We will estimate the numerical value
More informationAn Old Research Question
ANOVA An Old Research Question The impact of TV on high-school grade Watch or not watch Two groups The impact of TV hours on high-school grade Exactly how much TV watching would make difference Multiple
More informationFACTORIAL DESIGNS and NESTED DESIGNS
Experimental Design and Statistical Methods Workshop FACTORIAL DESIGNS and NESTED DESIGNS Jesús Piedrafita Arilla jesus.piedrafita@uab.cat Departament de Ciència Animal i dels Aliments Items Factorial
More information