Measuring the time constant for an RC-Circuit

Size: px
Start display at page:

Download "Measuring the time constant for an RC-Circuit"

Transcription

1 Physics 8.02T 1 Fall 2001 Measuring the time constant for an RC-Circuit Introduction: Capacitors Capacitors are circuit elements that store electric charge Q according to Q = CV where V is the voltage across the capacitor andc is the constant of proportionality called the capacitance. The unit of capacitance is the farad, [F] = [C]/[V]; 1 farad = (1 coulomb)/(1 volt). Capacitors come in many shapes and sizes but the basic idea is that a capacitor consists of two conductors separated by a spacing, which may be filled with an insulating material (dielectric). One conductor has charge +Q and the other conductor has charge Q. The conductor with positive charge is at a higher voltage then the conductor with negative charge. Most capacitors are in the picofarad [pf], F, to the millifarad range [mf], 10 3 F =1000µF. Capacitors can do many things in both ac circuits and dc circuits. Capacitors store energy Capacitors when coupled with resistors can delay voltage changes Capacitors can be used to filter unwanted frequency signals Capacitors are needed to make resonant circuits Capacitors and resistors can be combined to make frequency dependent and independent voltage dividers In these experiments you will measure the time constants associated with a discharging and charging capacitor in series with different resistors.

2 Physics 8.02T 2 Fall 2001 Computer Setup: Connect the 750 Interface to your computer, turn on the Interface, and then turn your computer on. Data Studio File: Download the Data Studio file RC Circuits.ds from the Current Assignment webpage and save it on your desktop. If there is already a file by this name on your desktop, save over it, as it may not be set up properly. Open it by double clicking on it. Your file has a Signal Generator Display, and two Graph Displays which are already set up to display Current versus Time and Voltage versus Time. Signal Generator: 1. In the Signal Generator dialog we have chosen Postive Square Wave Function. 2. The Amplitude has been adjusted to 4.0 V, the Frequency to 0.4 Hz, and the sampling rate to 1000 Hz 3. We chose the output data that you will record by clicking the plus button (+) beside Measurements and Sample Rate on the Signal Generator dialog and clicking the appropriate Measure Output Voltage and Measure Output Current buttons. Voltage Sensor Setup 1. Connect the Voltage Sensor directly into the Analog Channel B on the 750 Interface.

3 Physics 8.02T 3 Fall Click the Setup button. On the Sensor menu, drag the Voltage Sensor icon and place it on the Analog Channel B. Current Sensor Setup 1. Connect the Current Sensor directly into the Analog Channel A on the 750 Interface. 2. Click the Setup button. On the Sensor menu, drag the Current Sensor icon and place it on the Analog Channel A. Graph: Here s how to set up the two graphs if you ever need to (it should already be set up for you here). Drag the Voltage, ChB icon in the Data Window and drag it into the Graph icon. This will create a Voltage (ChB) vs. Time graph. Grab the Current, ChA icon in the Data Window and drag it into the Graph icon. This will create a Current (ChA) vs. Time graph. AC/DC Electronics Lab circuit board 1. Connect the banana plug patch cords from the OUTPUT ports of the 750 Interface to the banana jacks on the AC/DC Electronics Lab circuit board. 2. In order to measure the current that flows in the circuit, you must connect the Current Sensor in series with the 100 ohm resistor (brown, black, brown) and the 330 microfarad capacitor. Put alligator clips on the Current Sensor banana jacks and connect it in series with the other circuit elements forming a closed circuit using the 750 Interface as the voltage source. 3. In order to measure the voltage across the capacitor, you must connect the Voltage Sensor in parallel with the capacitor. Put alligator clips on the Voltage Sensor banana plugs and connect the sensor in parallel with the capacitor.

4 Physics 8.02T 4 Fall 2001 Sampling Options: Click on drag down menu labeled Experiment on the top tool bar. In the Experiment menu, click on the Set Sampling Option to open the Sampling Options dialog. Check that the Delay Choice is on None. Check that the Automatic Stop choice is Time with 5.0 seconds in the window. If these are not set in this manner, set them to these choices. Data Recording: Press Start to begin taking data. Once the data has been recorded, scale it to fit the graph screen by clicking on the first icon on the left at the top of the Graph Window, which is the scale to fit icon Data Analysis: Measuring the time constant. There are several ways to measure the time constant for the RC circuit. Method 1: The current in the charging circuit with initial value I 0 at t = 0 decreases exponentially in time, I(t) = I 0 e t R C. This function is often written as I(t) = I 0 e t τ where τ = RC is called the time constant. You can determine the time constantτ graphically by measuring the current I(t 1 ) at a fixed time and then finding the time t 1 + τ such that the current has the value t 1 I(t 1 + τ ) = I(t 1 )e 1 = 0.368I(t 1 ).

5 Physics 8.02T 5 Fall 2001 Drag the Current, ChA icon from the Data Window and drop it on the Graph icon in the Display window. This creates a new current vs. time graph. Enlarge the Graph window. Click on the Zoom Select (fourth from the left) icon in the Graph icon bar. Form a box around a region where there is exponential decay for the current. Click on Smart Tool (sixth from the left). Record the value of the current and the time for any point (at some time t ) on the exponential decaying function. Multiply the current value by e 1 1 = Use the Smart Tool to find the new time t 1 + τ such that the current is down by a factor of e 1 = Determine the time constant and record your value Questions 1. Estimate the accuracy with which you can determine this point. 2. What is the error in your calculation for the time constant? 3. How does your measured value compare to the theoretical value for your circuit? 4. Explain why there may be a discrepancy between your experimental result and the theoretical value? Method 2: A second approach is to take the natural log of the current, using the two facts that ln(e t τ ) = t τ and ln(ab) = ln a + lnb, which yield ln(i(t)) = ln(i 0 e t τ ) = ln(i 0 ) + ln(e t τ ) = ln(i 0 ) t τ. Thus, the function ln(i(t)) is a linear function of time. The y-intercept of this graph is ln(i 0 ) and its slope = 1 τ. Thus the time constant can be found from the slope according to τ = 1 slope. Click the Calculator button on the bar menu. In the Calculator window click New. The variable x should be highlighted in the Definition window. Click on the Scientific button and scroll down and click on ln(x). Scroll down on the Variables menu and click on Data Measurement. In the Please Choose a Data Source Window, scroll and click on Current, ChA and click OK. Then click the Accept button in the calculator window. A calculator icon with your equation should appear in the Data window. Drag that calculator icon to the Graph icon in the Display window. A fairly complicated graph will appear due to statistical fluctuations in the data. Use the Zoom Select to isolate data where the function is linear. You should see fluctuations in the data due to approximations associated with the sampling rate. You can use Zoom Select to choose the region where there are the smallest fluctuations. Use the mouse to highlight a region of data. Once you isolated this region, click on the Fit button, scroll down and click to linear fit. Record the value of the slope and the y-intercept. Use your value of the slope to calculate the time constant.

6 Physics 8.02T 6 Fall 2001 Questions: 1.What can you say about the reliability of this method? 2. How did the slope change as you changed the region of selected data? Different Time Constants: 1. Measue the time constant for two 100 ohm resistors in parallel. 2. Measure the time constant for two 100 ohm resistors in series. Now go to WebAssign and enter your three experimental values for the time constants in the space provided.

Experiment P43: RC Circuit (Power Amplifier, Voltage Sensor)

Experiment P43: RC Circuit (Power Amplifier, Voltage Sensor) PASCO scientific Vol. 2 Physics Lab Manual: P43-1 Experiment P43: (Power Amplifier, Voltage Sensor) Concept Time SW Interface Macintosh file Windows file circuits 30 m 700 P43 P43_RCCI.SWS EQUIPMENT NEEDED

More information

Name Class Date. RC Circuit Lab

Name Class Date. RC Circuit Lab RC Circuit Lab Objectives: Students will be able to Use the ScienceWorkshop interface to investigate the relationship between the voltage remaining across a capacitor and the time taken for the discharge

More information

Old Dominion University Physics 112N/227N/232N Lab Manual, 13 th Edition

Old Dominion University Physics 112N/227N/232N Lab Manual, 13 th Edition RC Circuits Experiment PH06_Todd OBJECTIVE To investigate how the voltage across a capacitor varies as it charges. To find the capacitive time constant. EQUIPMENT NEEDED Computer: Personal Computer with

More information

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics 8.02 Spring 2003 Experiment 17: RLC Circuit (modified 4/15/2003) OBJECTIVES

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics 8.02 Spring 2003 Experiment 17: RLC Circuit (modified 4/15/2003) OBJECTIVES MASSACHUSETTS INSTITUTE OF TECHNOLOGY Department of Physics 8. Spring 3 Experiment 7: R Circuit (modified 4/5/3) OBJECTIVES. To observe electrical oscillations, measure their frequencies, and verify energy

More information

University of TN Chattanooga Physics 1040L 8/18/2012 PHYSICS 1040L LAB LAB 4: R.C. TIME CONSTANT LAB

University of TN Chattanooga Physics 1040L 8/18/2012 PHYSICS 1040L LAB LAB 4: R.C. TIME CONSTANT LAB PHYSICS 1040L LAB LAB 4: R.C. TIME CONSTANT LAB OBJECT: To study the discharging of a capacitor and determine the time constant for a simple circuit. APPARATUS: Capacitor (about 24 μf), two resistors (about

More information

Lab 10: DC RC circuits

Lab 10: DC RC circuits Name: Lab 10: DC RC circuits Group Members: Date: TA s Name: Objectives: 1. To understand current and voltage characteristics of a DC RC circuit 2. To understand the effect of the RC time constant Apparatus:

More information

Name: Lab Partner: Section:

Name: Lab Partner: Section: Chapter 6 Capacitors and RC Circuits Name: Lab Partner: Section: 6.1 Purpose The purpose of this experiment is to investigate the physics of capacitors in circuits. The charging and discharging of a capacitor

More information

RC Circuits. Equipment: Capstone with 850 interface, RLC circuit board, 2 voltage sensors (no alligator clips), 3 leads V C = 1

RC Circuits. Equipment: Capstone with 850 interface, RLC circuit board, 2 voltage sensors (no alligator clips), 3 leads V C = 1 R ircuits Equipment: apstone with 850 interface, RL circuit board, 2 voltage sensors (no alligator clips), 3 leads 1 Introduction The 3 basic linear circuits elements are the resistor, the capacitor, and

More information

( ) ( ) = q o. T 12 = τ ln 2. RC Circuits. 1 e t τ. q t

( ) ( ) = q o. T 12 = τ ln 2. RC Circuits. 1 e t τ. q t Objectives: To explore the charging and discharging cycles of RC circuits with differing amounts of resistance and/or capacitance.. Reading: Resnick, Halliday & Walker, 8th Ed. Section. 27-9 Apparatus:

More information

Chapter 13. Capacitors

Chapter 13. Capacitors Chapter 13 Capacitors Objectives Describe the basic structure and characteristics of a capacitor Discuss various types of capacitors Analyze series capacitors Analyze parallel capacitors Analyze capacitive

More information

PHY222 - Lab 7 RC Circuits: Charge Changing in Time Observing the way capacitors in RC circuits charge and discharge.

PHY222 - Lab 7 RC Circuits: Charge Changing in Time Observing the way capacitors in RC circuits charge and discharge. PHY222 Lab 7 RC Circuits: Charge Changing in Time Observing the way capacitors in RC circuits charge and discharge. Print Your Name Print Your Partners' Names You will return this handout to the instructor

More information

RC Circuit Lab - Discovery PSI Physics Capacitors and Resistors

RC Circuit Lab - Discovery PSI Physics Capacitors and Resistors 1 RC Circuit Lab - Discovery PSI Physics Capacitors and Resistors Name Date Period Purpose The purpose of this lab will be to determine how capacitors behave in R-C circuits. The manner in which capacitors

More information

RC Circuit (Power amplifier, Voltage Sensor)

RC Circuit (Power amplifier, Voltage Sensor) Object: RC Circuit (Power amplifier, Voltage Sensor) To investigate how the voltage across a capacitor varies as it charges and to find its capacitive time constant. Apparatus: Science Workshop, Power

More information

Lab 1 Uniform Motion - Graphing and Analyzing Motion

Lab 1 Uniform Motion - Graphing and Analyzing Motion Lab 1 Uniform Motion - Graphing and Analyzing Motion Objectives: < To observe the distance-time relation for motion at constant velocity. < To make a straight line fit to the distance-time data. < To interpret

More information

Lab 5 RC Circuits. What You Need To Know: Physics 212 Lab

Lab 5 RC Circuits. What You Need To Know: Physics 212 Lab Lab 5 R ircuits What You Need To Know: The Physics In the previous two labs you ve dealt strictly with resistors. In today s lab you ll be using a new circuit element called a capacitor. A capacitor consists

More information

Lab 5 RC Circuits. What You Need To Know: Physics 212 Lab

Lab 5 RC Circuits. What You Need To Know: Physics 212 Lab Lab 5 R ircuits What You Need To Know: The Physics In the previous two labs you ve dealt strictly with resistors. In today s lab you ll be using a new circuit element called a capacitor. A capacitor consists

More information

LAB 3: Capacitors & RC Circuits

LAB 3: Capacitors & RC Circuits LAB 3: Capacitors & C Circuits Name: Circuits Experiment Board Wire leads Capacitors, esistors EQUIPMENT NEEDED: Two D-cell Batteries Multimeter Logger Pro Software, ULI Purpose The purpose of this lab

More information

Practical 1 RC Circuits

Practical 1 RC Circuits Objectives Practical 1 Circuits 1) Observe and qualitatively describe the charging and discharging (decay) of the voltage on a capacitor. 2) Graphically determine the time constant for the decay, τ =.

More information

Experiment 4. RC Circuits. Observe and qualitatively describe the charging and discharging (decay) of the voltage on a capacitor.

Experiment 4. RC Circuits. Observe and qualitatively describe the charging and discharging (decay) of the voltage on a capacitor. Experiment 4 RC Circuits 4.1 Objectives Observe and qualitatively describe the charging and discharging (decay) of the voltage on a capacitor. Graphically determine the time constant τ for the decay. 4.2

More information

Capacitor investigations

Capacitor investigations Sensors: Loggers: Voltage Any EASYSENSE Capacitor investigations Logging time: EasyLog (20 s) Teacher s notes 01 Time constant for a capacitor - resistor circuit Theory The charging and discharging of

More information

Lab 4 RC Circuits. Name. Partner s Name. I. Introduction/Theory

Lab 4 RC Circuits. Name. Partner s Name. I. Introduction/Theory Lab 4 RC Circuits Name Partner s Name I. Introduction/Theory Consider a circuit such as that in Figure 1, in which a potential difference is applied to the series combination of a resistor and a capacitor.

More information

Computer simulation of radioactive decay

Computer simulation of radioactive decay Computer simulation of radioactive decay y now you should have worked your way through the introduction to Maple, as well as the introduction to data analysis using Excel Now we will explore radioactive

More information

Experiment Guide for RC Circuits

Experiment Guide for RC Circuits Guide-P1 Experiment Guide for RC Circuits I. Introduction 1. Capacitors A capacitor is a passive electronic component that stores energy in the form of an electrostatic field. The unit of capacitance is

More information

Simple circuits - 3 hr

Simple circuits - 3 hr Simple circuits - 3 hr Resistances in circuits Analogy of water flow and electric current An electrical circuit consists of a closed loop with a number of different elements through which electric current

More information

Electronics Capacitors

Electronics Capacitors Electronics Capacitors Wilfrid Laurier University October 9, 2015 Capacitor an electronic device which consists of two conductive plates separated by an insulator Capacitor an electronic device which consists

More information

The Basic Capacitor. Dielectric. Conductors

The Basic Capacitor. Dielectric. Conductors Chapter 9 The Basic Capacitor Capacitors are one of the fundamental passive components. In its most basic form, it is composed of two conductive plates separated by an insulating dielectric. The ability

More information

Lab 4 CAPACITORS & RC CIRCUITS

Lab 4 CAPACITORS & RC CIRCUITS 67 Name Date Partners Lab 4 CAPACITORS & RC CIRCUITS OBJECTIVES OVERVIEW To define capacitance and to learn to measure it with a digital multimeter. To explore how the capacitance of conducting parallel

More information

Experiment 8: Capacitance and the Oscilloscope

Experiment 8: Capacitance and the Oscilloscope Experiment 8: Capacitance and the Oscilloscope Nate Saffold nas2173@columbia.edu Office Hour: Mondays, 5:30PM-6:30PM @ Pupin 1216 INTRO TO EXPERIMENTAL PHYS-LAB 1493/1494/2699 Outline Capacitance: Capacitor

More information

PHYSICS 171 UNIVERSITY PHYSICS LAB II. Experiment 6. Transient Response of An RC Circuit

PHYSICS 171 UNIVERSITY PHYSICS LAB II. Experiment 6. Transient Response of An RC Circuit PHYSICS 171 UNIVERSITY PHYSICS LAB II Experiment 6 Transient Response of An RC Circuit Equipment: Supplies: Function Generator, Dual Trace Oscilloscope.002 Microfarad, 0.1 Microfarad capacitors; 1 Kilohm,

More information

Electric Field PHYS 296

Electric Field PHYS 296 Electric Field PHYS 296 Your name Lab section PRE-LAB QUIZZES 1. What will we investigate in this lab? 2. In a uniform electric field between two parallel plates, a potential probe records the electric

More information

SOTM LAB: P16 OHM S LAW I. TEACHER NOTES & GUIDELINES TITLE OF LAB: Ohm s Law DEVELOPERS OF LAB:

SOTM LAB: P16 OHM S LAW I. TEACHER NOTES & GUIDELINES TITLE OF LAB: Ohm s Law DEVELOPERS OF LAB: SOTM LAB: P16 OHM S LAW I. TEACHER NOTES & GUIDELINES TITLE OF LAB: Ohm s Law DEVELOPERS OF LAB: John Lane, JD853@maristb.marist.edu Taylor Pancoast, JD573@maristb.marist.edu OVERVIEW OF LAB DESCRIPTION

More information

first name (print) last name (print) brock id (ab17cd) (lab date)

first name (print) last name (print) brock id (ab17cd) (lab date) (ta initials) first name (print) last name (print) brock id (ab17cd) (lab date) Experiment 1 Capacitance In this Experiment you will learn the relationship between the voltage and charge stored on a capacitor;

More information

Lab 5 - Capacitors and RC Circuits

Lab 5 - Capacitors and RC Circuits Lab 5 Capacitors and RC Circuits L51 Name Date Partners Lab 5 Capacitors and RC Circuits OBJECTIVES To define capacitance and to learn to measure it with a digital multimeter. To explore how the capacitance

More information

7/06 Electric Fields and Energy

7/06 Electric Fields and Energy Part ASome standard electric field and potential configurations About this lab: Electric fields are created by electric charges and exert force on charges. Electric potential gives an alternative description.

More information

LAB 2 - ONE DIMENSIONAL MOTION

LAB 2 - ONE DIMENSIONAL MOTION Name Date Partners L02-1 LAB 2 - ONE DIMENSIONAL MOTION OBJECTIVES Slow and steady wins the race. Aesop s fable: The Hare and the Tortoise To learn how to use a motion detector and gain more familiarity

More information

B THE CAPACITOR. Theory

B THE CAPACITOR. Theory 8. THE CAPACITOR You will study several aspects of a capacitor, how the voltage across it changes with time as it is being charged and discharged and how it stores energy. The most well known device for

More information

Direct Current (DC) Circuits

Direct Current (DC) Circuits Direct Current (DC) Circuits NOTE: There are short answer analysis questions in the Participation section the informal lab report. emember to include these answers in your lab notebook as they will be

More information

ENERGY AND TIME CONSTANTS IN RC CIRCUITS By: Iwana Loveu Student No Lab Section: 0003 Date: February 8, 2004

ENERGY AND TIME CONSTANTS IN RC CIRCUITS By: Iwana Loveu Student No Lab Section: 0003 Date: February 8, 2004 ENERGY AND TIME CONSTANTS IN RC CIRCUITS By: Iwana Loveu Student No. 416 614 5543 Lab Section: 0003 Date: February 8, 2004 Abstract: Two charged conductors consisting of equal and opposite charges forms

More information

Some Important Electrical Units

Some Important Electrical Units Some Important Electrical Units Quantity Unit Symbol Current Charge Voltage Resistance Power Ampere Coulomb Volt Ohm Watt A C V W W These derived units are based on fundamental units from the meterkilogram-second

More information

Capacitor in the AC circuit with Cobra3

Capacitor in the AC circuit with Cobra3 Capacitor in the AC circuit with Cobra3 LEP Related Topics Capacitance, Kirchhoff s laws, Maxwell s equations, AC impedance, Phase displacement Principle A capacitor is connected in a circuit with a variable-frequency

More information

Capacitors. The charge Q on a capacitor s plate is proportional to the potential difference V across the Q = C V (1)

Capacitors. The charge Q on a capacitor s plate is proportional to the potential difference V across the Q = C V (1) apacitors THEORY The charge Q on a capacitor s plate is proportional to the potential difference V across the capacitor. We express this with Q = V (1) where is a proportionality constant known as the

More information

EXPERIMENT 5A RC Circuits

EXPERIMENT 5A RC Circuits EXPERIMENT 5A Circuits Objectives 1) Observe and qualitatively describe the charging and discharging (decay) of the voltage on a capacitor. 2) Graphically determine the time constant for the decay, τ =.

More information

Capacitors GOAL. EQUIPMENT. CapacitorDecay.cmbl 1. Building a Capacitor

Capacitors GOAL. EQUIPMENT. CapacitorDecay.cmbl 1. Building a Capacitor PHYSICS EXPERIMENTS 133 Capacitor 1 Capacitors GOAL. To measure capacitance with a digital multimeter. To make a simple capacitor. To determine and/or apply the rules for finding the equivalent capacitance

More information

The RC Time Constant

The RC Time Constant The RC Time Constant Objectives When a direct-current source of emf is suddenly placed in series with a capacitor and a resistor, there is current in the circuit for whatever time it takes to fully charge

More information

CAPACITANCE. Capacitor. Because of the effect of capacitance, an electrical circuit can store energy, even after being de-energized.

CAPACITANCE. Capacitor. Because of the effect of capacitance, an electrical circuit can store energy, even after being de-energized. D ircuits APAITANE APAITANE Because of the effect of capacitance, an electrical circuit can store energy, even after being de-energized. EO 1.5 EO 1.6 EO 1.7 EO 1.8 EO 1.9 DESRIBE the construction of a

More information

Capacitance Measurement

Capacitance Measurement Overview The goal of this two-week laboratory is to develop a procedure to accurately measure a capacitance. In the first lab session, you will explore methods to measure capacitance, and their uncertainties.

More information

Lab 5 CAPACITORS & RC CIRCUITS

Lab 5 CAPACITORS & RC CIRCUITS L051 Name Date Partners Lab 5 CAPACITORS & RC CIRCUITS OBJECTIVES OVERVIEW To define capacitance and to learn to measure it with a digital multimeter. To explore how the capacitance of conducting parallel

More information

Lab 3 Momentum Change and Impulse

Lab 3 Momentum Change and Impulse Lab 3 Momentum Change and Impulse Objectives: < To measure the change in momentum of a cart in a collision and the impulse acting on it during the collision and to compare these values as a test of the

More information

Capacitors are devices which can store electric charge. They have many applications in electronic circuits. They include:

Capacitors are devices which can store electric charge. They have many applications in electronic circuits. They include: CAPACITORS Capacitors are devices which can store electric charge They have many applications in electronic circuits They include: forming timing elements, waveform shaping, limiting current in AC circuits

More information

Chapt ha e pt r e r 9 Capacitors

Chapt ha e pt r e r 9 Capacitors Chapter 9 Capacitors Basics of a Capacitor In its simplest form, a capacitor is an electrical device constructed of two parallel plates separated by an insulating material called the dielectric In the

More information

Figure 1: Capacitor circuit

Figure 1: Capacitor circuit Capacitors INTRODUCTION The basic function of a capacitor 1 is to store charge and thereby electrical energy. This energy can be retrieved at a later time for a variety of uses. Often, multiple capacitors

More information

Capacitance. A capacitor consists of two conductors that are close but not touching. A capacitor has the ability to store electric charge.

Capacitance. A capacitor consists of two conductors that are close but not touching. A capacitor has the ability to store electric charge. Capacitance A capacitor consists of two conductors that are close but not touching. A capacitor has the ability to store electric charge. a) Parallel-plate capacitor connected to battery. (b) is a circuit

More information

Experiment FT1: Measurement of Dielectric Constant

Experiment FT1: Measurement of Dielectric Constant Experiment FT1: Measurement of Dielectric Constant Name: ID: 1. Objective: (i) To measure the dielectric constant of paper and plastic film. (ii) To examine the energy storage capacity of a practical capacitor.

More information

PHYSICS 122 Lab EXPERIMENT NO. 6 AC CIRCUITS

PHYSICS 122 Lab EXPERIMENT NO. 6 AC CIRCUITS PHYSICS 122 Lab EXPERIMENT NO. 6 AC CIRCUITS The first purpose of this laboratory is to observe voltages as a function of time in an RC circuit and compare it to its expected time behavior. In the second

More information

Newton's 2 nd Law. . Your end results should only be interms of m

Newton's 2 nd Law. . Your end results should only be interms of m Newton's nd Law Introduction: In today's lab you will demonstrate the validity of Newton's Laws in predicting the motion of a simple mechanical system. The system that you will investigate consists of

More information

Tutorial 23 Back Analysis of Material Properties

Tutorial 23 Back Analysis of Material Properties Tutorial 23 Back Analysis of Material Properties slope with known failure surface sensitivity analysis probabilistic analysis back analysis of material strength Introduction Model This tutorial will demonstrate

More information

Measuring Planck s Constant By Martin Hackworth

Measuring Planck s Constant By Martin Hackworth Measuring Planck s Constant By Martin Hackworth Historical Perspective and Physics Theory Max Planck (1858-1947) was born in Kiel Germany and attended schools in Munich and Berlin. Planck was an early

More information

Capacitor Construction

Capacitor Construction Capacitor Construction Topics covered in this presentation: Capacitor Construction 1 of 13 Introduction to Capacitors A capacitor is a device that is able to store charge and acts like a temporary, rechargeable

More information

A Determination of Planck s Constant with LED s written by Mark Langella

A Determination of Planck s Constant with LED s written by Mark Langella A Determination of Planck s Constant with LED s written by Mark Langella The purpose of this experiment is to measure Planck s constant, a fundamental physical constant in nature, by studying the energy

More information

July 11, Capacitor CBL 23. Name Date: Partners: CAPACITORS. TI-83 calculator with unit-tounit. Resistor (about 100 kω) Wavetek multimeter

July 11, Capacitor CBL 23. Name Date: Partners: CAPACITORS. TI-83 calculator with unit-tounit. Resistor (about 100 kω) Wavetek multimeter July 11, 2008 - CBL 23 Name Date: Partners: CAPACITORS Materials: CBL unit TI-83 calculator with unit-tounit link cable Resistor (about 100 kω) Connecting wires Wavetek multimeter TI voltage probe Assorted

More information

Driven Harmonic Oscillator

Driven Harmonic Oscillator Driven Harmonic Oscillator Physics 6B Lab Experiment 1 APPARATUS Computer and interface Mechanical vibrator and spring holder Stands, etc. to hold vibrator Motion sensor C-209 spring Weight holder and

More information

EXPERIMENT 07 TO STUDY DC RC CIRCUIT AND TRANSIENT PHENOMENA

EXPERIMENT 07 TO STUDY DC RC CIRCUIT AND TRANSIENT PHENOMENA EXPERIMENT 07 TO STUDY DC RC CIRCUIT AND TRANSIENT PHENOMENA DISCUSSION The capacitor is a element which stores electric energy by charging the charge on it. Bear in mind that the charge on a capacitor

More information

Lab 5 - Capacitors and RC Circuits

Lab 5 - Capacitors and RC Circuits Lab 5 Capacitors and RC Circuits L51 Name Date Partners Lab 5 Capacitors and RC Circuits OBJECTIVES To define capacitance and to learn to measure it with a digital multimeter. To explore how the capacitance

More information

Chapter 6. Answers to examination-style questions. Answers Marks Examiner s tips

Chapter 6. Answers to examination-style questions. Answers Marks Examiner s tips (a) Taking natural logs on both sides of V = V o e t/c gives ln V = ln V o + ln (e t/cr ) As ln (e t/cr ) = t CR then ln V = ln V o t CR = a bt hence a = ln V o and b = CR (b) (i) t/s 20 240 270 300 mean.427.233.033

More information

RLC Circuits. 1 Introduction. 1.1 Undriven Systems. 1.2 Driven Systems

RLC Circuits. 1 Introduction. 1.1 Undriven Systems. 1.2 Driven Systems RLC Circuits Equipment: Capstone, 850 interface, RLC circuit board, 4 leads (91 cm), 3 voltage sensors, Fluke mulitmeter, and BNC connector on one end and banana plugs on the other Reading: Review AC circuits

More information

Lab 08 Capacitors 2. Figure 2 Series RC circuit with SPDT switch to charge and discharge capacitor.

Lab 08 Capacitors 2. Figure 2 Series RC circuit with SPDT switch to charge and discharge capacitor. Lab 08: Capacitors Last edited March 5, 2018 Learning Objectives: 1. Understand the short-term and long-term behavior of circuits containing capacitors. 2. Understand the mathematical relationship between

More information

Physics 15b PSI Week 2: Capacitance

Physics 15b PSI Week 2: Capacitance Physics 15b PSI Week 2: Capacitance Chapter 1 of Purcell introduces charge and its relationship to electric field fields, with the concept of the electrical potential added in Chapter 2. Chapter 3 introduces

More information

Experiment ES Estimating a Second

Experiment ES Estimating a Second Introduction: About Estimating Experiment ES Estimating a Second Before measuring and calculating comes estimation; a chance to exercise ingenuity. Often it's a matter of organizing your rough knowledge

More information

Exercise 1: Capacitors

Exercise 1: Capacitors Capacitance AC 1 Fundamentals Exercise 1: Capacitors EXERCISE OBJECTIVE When you have completed this exercise, you will be able to describe the effect a capacitor has on dc and ac circuits by using measured

More information

What happens when things change. Transient current and voltage relationships in a simple resistive circuit.

What happens when things change. Transient current and voltage relationships in a simple resistive circuit. Module 4 AC Theory What happens when things change. What you'll learn in Module 4. 4.1 Resistors in DC Circuits Transient events in DC circuits. The difference between Ideal and Practical circuits Transient

More information

Dr. Julie J. Nazareth

Dr. Julie J. Nazareth Name: Dr. Julie J. Nazareth Lab Partner(s): Physics: 133L Date lab performed: Section: Capacitors Parts A & B: Measurement of capacitance single, series, and parallel combinations Table 1: Voltage and

More information

A capacitor is a device that stores electric charge (memory devices). A capacitor is a device that stores energy E = Q2 2C = CV 2

A capacitor is a device that stores electric charge (memory devices). A capacitor is a device that stores energy E = Q2 2C = CV 2 Capacitance: Lecture 2: Resistors and Capacitors Capacitance (C) is defined as the ratio of charge (Q) to voltage (V) on an object: C = Q/V = Coulombs/Volt = Farad Capacitance of an object depends on geometry

More information

Work and Energy. This sum can be determined graphically as the area under the plot of force vs. distance. 1

Work and Energy. This sum can be determined graphically as the area under the plot of force vs. distance. 1 Work and Energy Experiment 18 Work is a measure of energy transfer. In the absence of friction, when positive work is done on an object, there will be an increase in its kinetic or potential energy. In

More information

Physics Spring 2006 Experiment 4. Centripetal Force. For a mass M in uniform circular motion with tangential speed v at radius R, the required

Physics Spring 2006 Experiment 4. Centripetal Force. For a mass M in uniform circular motion with tangential speed v at radius R, the required Centripetal Force I. Introduction. In this experiment you will study the centripetal force required for a mass in uniform circular motion. You will determine the centripetal forces required for different

More information

Developing a Scientific Theory

Developing a Scientific Theory Name Date Developing a Scientific Theory Equipment Needed Qty Equipment Needed Qty Photogate/Pulley System (ME-6838) 1 String (SE-8050) 1 Mass and Hanger Set (ME-8967) 1 Universal Table Clamp (ME-9376B)

More information

The Capacitor. +q -q

The Capacitor. +q -q The Capacitor I. INTRODUCTION A simple capacitor consists of two parallel plates separated by air or other insulation, and is useful for storing a charge. If a potential difference is placed across the

More information

Exercise 1: RC Time Constants

Exercise 1: RC Time Constants Exercise 1: RC EXERCISE OBJECTIVE When you have completed this exercise, you will be able to determine the time constant of an RC circuit by using calculated and measured values. You will verify your results

More information

ECE 220 Laboratory 4 Volt Meter, Comparators, and Timer

ECE 220 Laboratory 4 Volt Meter, Comparators, and Timer ECE 220 Laboratory 4 Volt Meter, Comparators, and Timer Michael W. Marcellin Please follow all rules, procedures and report requirements as described at the beginning of the document entitled ECE 220 Laboratory

More information

Coulomb s law with Cobra3

Coulomb s law with Cobra3 Coulomb s law with Cobra3 LEP Related Topics Electric field, electric field strenght, electric flux, electrostatic induction, electric constant, surface charge density, dielectric displacement, electrostatic

More information

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department. Experiment 03: Work and Energy

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department. Experiment 03: Work and Energy MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department Physics 8.01 Fall Term 2010 Experiment 03: Work and Energy Purpose of the Experiment: In this experiment you allow a cart to roll down an inclined

More information

Properties of Capacitors and its DC Behavior

Properties of Capacitors and its DC Behavior LABORATORY Experiment 2 Properties of Capacitors and its DC Behavior 1. Objectives To investigate the /V characteristics of capacitor. To calculate the equivalent capacitance of capacitors connected in

More information

EE1305/EE1105 Intro to Electrical and Computer Engineering Lecture Week 6

EE1305/EE1105 Intro to Electrical and Computer Engineering Lecture Week 6 EE1305/EE1105 Intro to Electrical and Computer Engineering Lecture Week 6 Homework Passive Components Capacitors RC Filters fc Calculations Bode Plots Module III Homework- due 2/20 (Najera), due 2/23 (Quinones)

More information

CHAPTER 6. Inductance, Capacitance, and Mutual Inductance

CHAPTER 6. Inductance, Capacitance, and Mutual Inductance CHAPTER 6 Inductance, Capacitance, and Mutual Inductance 6.1 The Inductor Inductance is symbolized by the letter L, is measured in henrys (H), and is represented graphically as a coiled wire. The inductor

More information

ENGR 2405 Chapter 6. Capacitors And Inductors

ENGR 2405 Chapter 6. Capacitors And Inductors ENGR 2405 Chapter 6 Capacitors And Inductors Overview This chapter will introduce two new linear circuit elements: The capacitor The inductor Unlike resistors, these elements do not dissipate energy They

More information

Switch. R 5 V Capacitor. ower upply. Voltmete. Goals. Introduction

Switch. R 5 V Capacitor. ower upply. Voltmete. Goals. Introduction Switch Lab 6. Circuits ower upply Goals + + R 5 V Capacitor V To appreciate the capacitor as a charge storage device. To measure the voltage across a capacitor as it discharges through a resistor, and

More information

Determining the Conductivity of Standard Solutions

Determining the Conductivity of Standard Solutions Determining the Conductivity of Standard Solutions by Anna Cole and Shannon Clement Louisiana Curriculum Framework Content Strand: Science as Inquiry, Physical Science Grade Level 11-12 Objectives: 1.

More information

Coulomb s constant k = 9x10 9 N m 2 /C 2

Coulomb s constant k = 9x10 9 N m 2 /C 2 1 Part 2: Electric Potential 2.1: Potential (Voltage) & Potential Energy q 2 Potential Energy of Point Charges Symbol U mks units [Joules = J] q 1 r Two point charges share an electric potential energy

More information

Switch. R 5 V Capacitor. ower upply. Voltmete. Goals. Introduction

Switch. R 5 V Capacitor. ower upply. Voltmete. Goals. Introduction Switch Lab 6. Circuits ower upply Goals + + R 5 V Capacitor V To appreciate the capacitor as a charge storage device. To measure the voltage across a capacitor as it discharges through a resistor, and

More information

CAPACITORS / ENERGY STORED BY CAPACITORS / CHARGING AND DISCHARGING

CAPACITORS / ENERGY STORED BY CAPACITORS / CHARGING AND DISCHARGING PHYSICS A2 UNIT 4 SECTION 3: CAPACITANCE CAPACITORS / ENERGY STORED BY CAPACITORS / CHARGING AND DISCHARGING # Question CAPACITORS 1 What is current? Current is the rate of flow of charge in a circuit

More information

Activity P11: Collision Impulse and Momentum (Force Sensor, Motion Sensor)

Activity P11: Collision Impulse and Momentum (Force Sensor, Motion Sensor) Name Class Date Activity P11: Collision Impulse and Momentum (Force Sensor, Motion Sensor) Concept DataStudio ScienceWorkshop (Mac) ScienceWorkshop (Win) Newton s Laws P11 Impulse.DS P14 Collision P14_COLL.SWS

More information

General Physics II Lab EM2 Capacitance and Electrostatic Energy

General Physics II Lab EM2 Capacitance and Electrostatic Energy Purpose General Physics II Lab General Physics II Lab EM2 Capacitance and Electrostatic Energy In this experiment, you will examine the relationship between charge, voltage and capacitance of a parallel

More information

Lab 1: Numerical Solution of Laplace s Equation

Lab 1: Numerical Solution of Laplace s Equation Lab 1: Numerical Solution of Laplace s Equation ELEC 3105 last modified August 27, 2012 1 Before You Start This lab and all relevant files can be found at the course website. You will need to obtain an

More information

Standard Operating Procedure. edaq Potentionstat. Miramar College Potentiostat. -Report by Marianne Samonte, Dec 2009

Standard Operating Procedure. edaq Potentionstat. Miramar College Potentiostat. -Report by Marianne Samonte, Dec 2009 Standard Operating Procedure edaq Potentionstat Miramar College Potentiostat -Report by Marianne Samonte, Dec 2009 I. Instrument Description of Potentiostat and ecorder The components of the edaq ecorder

More information

Capacitance and Dielectrics

Capacitance and Dielectrics Slide 1 / 39 Capacitance and Dielectrics 2011 by Bryan Pflueger Capacitors Slide 2 / 39 A capacitor is any two conductors seperated by an insulator, such as air or another material. Each conductor has

More information

Laboratory 7: Charging and Discharging a Capacitor Prelab

Laboratory 7: Charging and Discharging a Capacitor Prelab Phys 132L Fall 2018 Laboratory 7: Charging and Discharging a Capacitor Prelab Consider a capacitor with capacitance C connected in series to a resistor with resistance R as shown in Fig. 1. Theory predicts

More information

Electrostatic Charge Distribution (Charge Sensor)

Electrostatic Charge Distribution (Charge Sensor) 65 Electrostatic Charge Distribution (Charge Sensor) E&M: Electrostatic charge distribution Equipment List DataStudio file: 65 Charge Distribution.ds Qty Items Part Numbers 1 PASCO Interface (for one sensor)

More information

Measuring ph with Smart Cuvettes

Measuring ph with Smart Cuvettes 1 Measuring ph with Smart Cuvettes Hardware Setup for ph Measurements ph is measured in Absorbance mode. Configure your spectroscopy components for Absorbance measurements. Sample Absorbance setups for

More information

Laboratory Worksheet Experiment NE04 - RC Circuit Department of Physics The University of Hong Kong. Name: Student ID: Date:

Laboratory Worksheet Experiment NE04 - RC Circuit Department of Physics The University of Hong Kong. Name: Student ID: Date: PHYS1050 / PHYS1250 Laboratory Worksheet Experiment Department of Physics The University of Hong Kong Ref. (Staff Use) Name: Student ID: Date: Draw a schematic diagram of the charging RC circuit with ammeter

More information

Electric Fields and Equipotentials

Electric Fields and Equipotentials OBJECTIVE Electric Fields and Equipotentials To study and describe the two-dimensional electric field. To map the location of the equipotential surfaces around charged electrodes. To study the relationship

More information

Activity P27: Speed of Sound in Air (Sound Sensor)

Activity P27: Speed of Sound in Air (Sound Sensor) Activity P27: Speed of Sound in Air (Sound Sensor) Concept Speed of sound DataStudio P27 Speed of Sound 1.DS Equipment Needed Qty Other Qty Sound Sensor (CI-6506B) 1 Tape, duct 1 roll Base and Support

More information