ASMT-MT00. Moonstone Tri-Color Power LED Light Source. Data Sheet. Description. Features. Applications. Specifications
|
|
- Alfred Atkinson
- 4 years ago
- Views:
Transcription
1 Moonstone Tri-Color Power LED Light Source Description The Moonstone Tri-Color Power LED Light Source is a highperformance energy efficient device that can handle high thermal and high driving current. The exposed pad design enables excellent heat transfer from the package to the motherboard. The low-profile package design is suitable for a wide variety of applications especially where height is a constraint. The package is compatible with reflow soldering process. This provides more freedom and flexibility to the light source designer. Applications Contour lighting Cove lighting Architectural lighting Garden lighting Decorative lighting Commercial lighting Mood lighting Features Available in Tri-color. Energy efficient. Exposed pad for excellent heat transfer. Suitable for reflow soldering process. High current operation. Long operation life. Wide viewing angle. Silicone encapsulation. Non-ESD sensitive (threshold > 16 KV). MSL 5a products. Specifications 3.5V (max) at 350 ma for InGaN 2.3V (max) at 350 ma for AlInGaP 120 viewing angle - 1 -
2 Figure 1 Package Drawing 3.30 R Metal Slug ( Heat Sink) G+ G R R+ B B NOTE 1. All dimensions in millimeters. 2. Tolerance is ±0.1 mm unless otherwise specified. 3. Metal slug is connected to the anode of Red. Device Selection Guide (T J = 25 C) Part Number Color Luminous Flux, Φ V (Im) a, b Min. Typ. Max. Test Current (ma) Dice Technology ASMT-MT00 Red AlInGaP Green InGaN Blue InGaN a. Luminous flux, Φ V, is the total flux output as measured with an integrating sphere at 25-ms mono pulse condition. b. Flux tolerance is ±10%
3 Absolute Maximum Ratings Parameter AllnGaP InGaN Unit DC Forward Current a ma Peak Pulsing Current b ma Power Dissipation mw LED Junction Temperature C Operating Metal Slug Temperature Range at 350 ma 40 to to +105 C Storage Temperature Range 40 to to +120 C Soldering Temperature See Figure 11. a. Derate linearly based on Figure 8 for InGaN and Figure 9 for AllnGaP. b. Pulse condition duty factor = 10%, frequency = 1 khz. Optical Characteristics at 350 ma (T J = 25 C) Part Number Color Peak Wavelength, λ P (nm) Dominant Wavelength, λ d (nm) a Viewing Angle, 2θ ½ ( ) b Luminous Efficiency (lm/w) Typ. Typ. Typ. Typ. ASMT-MT00 Red Green Bue a. The dominant wavelength, λ d, is derived from the CIE Chromaticity Diagram and represents the color of the lamp. b. θ ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. Electrical Characteristics at 350 ma (T J = 25 C) Device Type Forward Voltage, V F (V) at I F = 350 ma Reverse Voltage, V R (V) a Thermal Resistance, Rθ J-MS ( C/W) b Min. Typ. Max. Typ. AllnGaP Not Recommended 23 InGaN a. Not designed for reverse bias operation. b. Rθ J-MS is thermal resistance from LED junction to metal slug. All 3 colors are lighted simultaneously during measurement
4 Figure 2 Relative Intensity vs. Wavelength RELATIVE INTENSITY GREEN BLUE RED WAVELENGTH - nm Figure 3 Relative Luminous Flux vs. Mono Pulse Current RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 ma) InGaN AllnGaP DC FORWARD CURRENT - ma Figure 4 Forward Current vs. Forward Voltage Figure 5 Radiation Pattern FORWARD CURRENT - ma AlInGaP InGaN FORWARD VOLTAGE - V NORMALIZED INTENSITY ANGULAR DISPLACEMENT - DEGREES Figure 6 Forward Voltage Shift vs. Junction Temperature Figure 7 Relative Light Output vs. Junction Temperature FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25 C) RED BLUE GREEN JUNCTION TEMPERATURE,T J - C RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25 C) BLUE GREEN RED JUNCTION TEMPERATURE,TJ - C - 4 -
5 Figure 8 Maximum Forward Current vs. Ambient Temperature for InGaN (Derated based on T JMAX = 125 C, Rθ J-A = 30 C/W, 40 C/W, and 50 C/W) MAX ALLOWABLE DC CURRENT - ma R J-A = 30 C/W R J-A = 40 C/W R J-A = 50 C/W AMBIENT TEMPERATURE, T A - C Figure 9 Maximum Forward Current vs. Ambient Temperature for AlInGaP (Derated based on T JMAX = 125 C, Rθ J-A = 30 C/W, 40 C/W, and 50 C/W) MAX ALLOWABLE DC CURRENT - ma R J-A = 30 C/W R J-A = 40 C/W R J-A = 50 C/W AMBIENT TEMPERATURE, T A - C Figure 10 Maximum Forward Current vs. Metal Slug Temperature (Derated based on T JMAX = 125 C, Rθ J-MS = 20 C/W for InGaN and Rθ J-MS = 23 C/W for AlInGaP) MAX ALLOWABLE DC CURRENT - ma R J-MS = 20 C/W R J-MS = 23 C/W METAL SLUG TEMPERATURE, T MS - C - 5 -
6 Figure 11 Recommended Reflow Soldering SEC. Figure 12 Recommended Soldering Land Pattern TEMPERATURE 217 C 200 C 150 C C 3 C/SEC. MAX. 3 C/SEC. MAX. -6 C/SEC. MAX SEC. 100 SEC. MAX. TIME (Acc. to J-STD-020C) NOTE For detail information on reflow soldering of surface mount LEDs, refer to Application Note AN1060, Surface Mounting SMT LED Indicator Components Part Numbering System A S M T M T x1 x2 x3 x4 Code Description Option x 1 Minimum Flux Bin 0 Full distribution x 2 Number of Flux Bins Starting from x 1 0 Full distribution x 3 Color Bin Selection 0 Red Full distribution Green Bins A, B, C, or D Blue Bins A, B, C, or D x 4 Packaging Option 1 Tape and Reel - 6 -
7 Bin Information Flux Bin Selection (x 1, x 2 ) Individual reel contains the part from 1 bin only. Minimum Flux Bin x 1 Red Green Blue 0 Full Distribution A H L E x 2 Number of Flux Bins Starting from Selected x 1 Red Green Blue 0 Full Distribution A B D Color Bin Selection (x 3 ) Individual reel contains the part from 1 bin only. Color Bin Combination x 3 Red Green Blue 0 Full Distribution A, B, C, and D A, B, C, and D Packaging Option (x 4 ) Selection Option 1 Tape and Reel Flux Bin Limit Luminous Flux (lm) at I F = 350 ma Bin ID Min. Max. A B C D E F G H J K L M Tolerance for each bin limits is ±10%. Color Bin Limit Color Bin ID Min. Max. Red Full Distribution Green A B C D Blue A B C D Tolerance: ±1 nm. Example: ASMT-MT x 1 = 0 Full Distribution x 2 = 0 Full Distribution x 3 = 0 Red (Full Distribution), Green (A, B, C, and D), Blue (A, B, C, and D) x 4 = 1 Tape and Reel Option - 7 -
8 Figure 13 CIE 1931 Chromaticity Diagram A B C D 0.70 Green 0.60 Y-COORDINATE Red 0.20 Blue D C 0.10 B A X-COORDINATE - 8 -
9 Tape and Reel Option 1 Figure 14 Carrier Tape Dimensions A W Bo F E B B P A 2.5 SECTION A Ko Ao SECTION B Dim Value A ± 0.10 B ± 0.10 K ± 0.1 E 1.75 ± 0.10 F ± 0.10 W 24.0 ± 0.10 P 16.0 ± 0.10 Quantity/Reel 250 units Note: All dimensions are in millimeters. Figure 15 Carrier Tape Leader and Trailer Dimensions END START MINIMUM OF 160 mm OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS MINIMUM OF 390 mm OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE
10 Figure 16 Reel Dimensions R º ± ± ± 0.50 R10.50 ± ± º Note: All dimensions are in millimeters
11 Handling Precautions The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, do not press on the silicone or poke a sharp object onto the silicone. This might damage the product and cause premature failure. During assembly or handling, the unit should be held on the body only. Refer to Application Note AN5288 for detailed information. Moisture Sensitivity This product is qualified as Moisture Sensitive Level 5a per JEDEC J-STD-020. Precautions when handling this moisture sensitive product are important to ensure the reliability of the product. Refer to Application Note AN5305, Handling of Moisture Sensitive Surface Mount Devices for details. Control for unfinished reel: Any unused LEDs need to be stored in sealed MBB with desiccant or desiccator at <5% RH. Control of assembled boards: If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB needs to be stored in sealed MBB with desiccant or desiccator at <5% RH to ensure no LEDs have exceeded their floor life of 24 hours. Baking is required if: HIC 10% indicator is not blue and 5% indicator is pink. The LEDs are exposed to condition of >30 C/60% RH at any time. The LEDs floor life exceeded 24 hours. Recommended baking condition: 60 ± 5 C for 20 hrs. Storage before use: Unopened moisture barrier bag (MBB) can be stored at <40 C/90% RH for 12 months. If the actual shelf life has exceeded 12 months and the humidity indicator card (HIC) indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. It is not recommended to open the (MBB) prior to assembly (e.g., for IQC). Control after opening the MBB: The humidity indicator card (HIC) shall be read immediately upon opening of MBB. The LEDs must be kept at <30 C/60% RH at all times, and all high temperature related processes including soldering, curing, or rework need to be completed within 24 hours
12 For product information and a complete list of distributors, please go to our web site: the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of in the United States, certain other countries and/or the EU. Copyright All Rights Reserved. The term "" refers to Limited and/or its subsidiaries. For more information, please visit reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by is believed to be accurate and reliable. However, does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. AV EN April 12, 2017
Data Sheet. ASMT-Mx22 / ASMT-MxE2 Moonstone 3 W High Brightness Power LED Light Source. Description. Features. Specifications.
ASMT-Mx22 / ASMT-MxE2 Moonstone 3 W High Brightness Power LED Light Source Data Sheet Description The Moonstone 3W High Brightness Power LED Light Source is a high performance energy efficient device which
ASMT-Mx22/ASMT-MxE2. Data Sheet. Moonstone 3W High Brightness Power LED Light Source. Features. Overview. Specifications.
Data Sheet ASMT-Mx22/ASMT-MxE2 Moonstone 3W High Brightness Power LED Light Source Overview The Moonstone 3W high brightness power LED light source is a high-performance energy-efficient device that can
Data Sheet. ASMT-Mx00. Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
Data Sheet. ASMT- Mx2x / ASMT- MxEx Moonstone TM 3W Power LED Light Source. Description. Features. Applications. Specifications
SMT- Mx2x / SMT- MxEx Moonstone TM 3W Power LED Light Source Data Sheet Description The Moonstone 3W Power LED Light Source is a high performance energy efficient device which can handle high thermal and
Data Sheet. ASMT-QWBG, ASMT-QWBH 0.5 W Cool White Power PLCC4 Surface Mount LED. Description. Features. Applications
ASMT-QWBG, ASMT-QWBH 0.5 W Cool White Power PLCC4 Surface Mount LED Data Sheet Description The Avago Technologies ASMT-QWBx series 0.5W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
Data Sheet. ASMT-Ax3x 3W Power LED Light Source. Features. Description. Applications
ASMT-Ax3x 3W Power LED Light Source Data Sheet Description This 3W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed
Data Sheet. ADJD-xMxx. High Power Light Strip, Ring & Round. Description. Features. Applications. Specifications
ADJD-xMxx High Power Light Strip, Ring & Round Data Sheet Description Avago s Light Strip, Ring & Round Power LEDs range of products offers a series of LEDs which provides better lifetime robustness and
Features. Applications
SMT-QYB-Nxxxx Super 0.5W Warm White Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5W Warm White Power PL-4 SMT LED is Warm white mid-power PL-4 SMT LEDs using InGaN chip technology.
Data Sheet. ASMT-QYBB-Nxxxx Super 0.5W Warm White Power PLCC-4 Surface Mount LED Indicator. Description. Features. Applications
SMT-QYBB-Nxxxx Super 0.5W Warm White Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5W Warm White Power PL-4 SMT LED is Warm white mid-power PL-4 SMT LEDs using InGaN chip technology.
ASMT-YTB2-0BB02. Data Sheet. High Brightness Tricolor PLCC6 Black Surface LED. Features. Description. Applications
Data Sheet ASMT-YTB2-0BB02 High Brightness Tricolor PLCC6 Black Surface LED Description The high brightness black top surface tricolor PLCC-6 family of SMT LEDs has a separate heat path for each LED dice,
ASMT-QxBD-Axxxx Super 0.5 W Power PLCC-4 Surface Mount LED Indicator. Features. Applications
SMT-QxBD-xxxx Super 0.5 W Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5 W Power PL-4 SMT LED is an extension of Power PL-4 SMT LEDs. The package can be driven at high current
Features. Applications
ASMB-MTB1-A3A2 PLCC-4 Tricolor Black Surface LED Data Sheet Description This family of SMT LEDs are in PLCC-4 package. A wide viewing angle together with the built in reflector drives up the intensity
HSMx-A2-xx-xxxxx Bi-Color HSMx-A3xx-xxxxx Tri-Color
Data Sheet HSMx-A3xx-xxxxx Tri-Color Description This family of SMT LEDs is packaged in the industry standard PLCC-4 package. These SMT LEDs have high reliability performance and are designed to work under
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED. Datasheet
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet Description The Avago Technologies ASMT-UYBx series 0.25W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
Features. Applications
SMT-QWB-Nxxxx Super 0.5W ool White Power PL-4 Surface Mount LED Indicator Data Sheet Description The Super 0.5W ool White Power PL-4 SMT LED is ool white mid-power PL-4 SMT LEDs using InGaN chip technology.
Data Sheet. ASMB-TTB0-0A3A2 High Brightness Tall Black Surface PLCC6 Tricolor LED. Description. Features. Applications
ASMB-TTB-A3A2 High Brightness Tall Black Surface PLCC6 Tricolor LED Data Sheet Description This family of SMT LEDs is packaged in the form of PLCC-6 with a separate heat path for each LED die, enabling
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
Data Sheet. ASMT-Jx32 3W Mini Power LED Light Source. Description. Features. Applications
ASMT-J32 3W Mini Power LED Light Source Data Sheet Description The 3W Mini Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving current. The
Data Sheet. ASMT-Jx1x 1 W Mini Power LED Light Source. Description. Features. Applications
ASMT-J1 1 W Mini Power LED Light Source Data Sheet Description This 1 W Mini Power LED Light Source is a high performance energ-efficient device that can handle high thermal and high driving current. Option
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Features Feature of the device: small package with high efficiency Typical color temperature: 3500 K. Typical view angle: 120. Typical light flux output: 33 lm @ 350mA ESD protection. Soldering methods:
ASMT-UWBG / ASMT-UWBH / ASMT-UWBJ 0.25W Cool White Power PLCC4 Surface Mount LED Datasheet
ASMT-UWBG / ASMT-UWBH / ASMT-UWBJ 0.25W Cool White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
Main Applications CCTV Wireless communication Indoor Lighting Outdoor Lighting
ProLight PK2N-2LJE-SD 2W Infrared 850 Power LED Technical Datasheet Version: 1.6 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Superior
Received. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0000991 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2011.03.09 2 Change Format 2011.03.31 3 1. Change Color Binning
Main Applications Backlighting Signaling Exterior Automotive Lighting Automotive Interior Lighting
ProLight PJ2N-FFPE-A 0.5W PC Amber Power LED Technical Datasheet Version: 1.1 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications
EAHP3030WA0 SMD HP. Features. Description. Applications. Revision : 1 LifecyclePhase:
SMD HP Features Top view white LED High luminous intensity output Typical Viewing Angle:120 Pb-free RoHS compliant Description The Everlight Americas package has high efficacy, high CRI, mid power consumption,
Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting
ProLight PK2E-5LPE-M 5W PC Magenta Power LED Technical Datasheet Version: 1.0 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture
Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PJ2N-2FPE-A2 2W PC Amber Power LED Technical Datasheet Version: 1.4 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications
Received. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0000991 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2011.03.09 2 Change Format 2011.03.31 3 1. Change Color Binning
SMD Side View LEDs LM2C/L7580S76/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
Cree XLamp XP-E2 Torch LEDs
Cree XLamp XP-E2 Torch LEDs Product family data sheet CLD-DS101 Rev 2H Product Description The XLamp XP-E2 Torch LED provides lumen output similar to the XLamp XP-G LED but in the smaller optical source
LITE-ON TECHNOLOGY CORPORATION
Features * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible.
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet High Power LED 0.5W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 120 Typical color temperature: 3500 K. ESD protection. Soldering
EHP-A23/RGB33-P01/TR. Data Sheet. Materials. High Power LED 1W. 1 of 12 Release Date: :11:33.0 Expired Period: Forever
Data Sheet Features Feature of the device: Small package with high efficiency Typical view angle: 120. ESD protection. Soldering methods: SMT Grouping parameter: Brightness, Forward Voltage and wavelength.
Everlight EZHVD 1W LED Series
Everlight Introduction The High Voltage (HV) LED is a surface-mount high voltage component featuring compact size, high brightness, and DC input voltage that more closely resembles the V rms of AC mains
EHP-AX08EL/GT01H-P03/5063/Y/N13
Data Sheet Features Feature of the device: Small package with high efficiency Typical color temperature: 5650 K. Typical viewing angle: 140 Typical light flux output: 160 lm @700mA. ESD protection. Soldering
Main Applications The perfect light color for the Bakery counter T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PS2P-TFPE-GP 0.2W Power LED Technical Datasheet Version: 1.2 Features High Color rendering index Good color uniformity Industry s first lighting-class LED Low Voltage DC operated Instant light
Received. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0000878 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2010.08.25 2 3 4. 5 1.Change Format 2.Add VF V1 BIN 1.Change
Received. Revised record
CHIN Series Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0001959 PAGE : 12 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2012.07.06 2 Change Product Labeling 2015.09.25
PLW2835EKA Series. Product Datasheet. Floor Light
PLW2835EKA Series Product Datasheet Bulb Wall Light Floor Light Tube Light General Lighting Introduction The PLW2835EKA series offer ultra-high luminous efficacy combined with the flexibility in design
PLW2835ACC Series. Product Datasheet. Bulb Wall Light Floor Lamp Tube Lighting
V.8/17 PLW2835ACC Series Product Datasheet Bulb Wall Light Floor Lamp Tube Lighting General Lighting Introduction The PLW2835ACC series offer ultra-high luminous efficacy combined with the flexibility
EHP-AX08EL/UB01H-P01/B7B8/F3
Data Sheet Features Feature of the device: Small package with high efficiency Typical wavelength: 465nm Typical view angle: 150 Typical light flux output: 17 lm @ 350mA. ESD protection. Soldering methods:
Features. Typical Applications G9 Candle Light. ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: DS-0384
ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: 1.1 Features High Color rendering index High flux per LED Good color uniformity Industry best moisture sensitivity level - JEDEC Level 1
SMD Side View LEDs LM2C/L7277SG6/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
Product family data sheet
Cree XLamp MC-E LED Product family data sheet CLD-DS16 Rev 11A MC-E White MC-E Color MC-E Dynamic White www.cree.com/xlamp Product Description The XLamp MC-E LED is a family of lighting-class, multi-chip
HI-POWER / LED MICRO-08
HI-POWER / LED MICRO-08 FEATURES + Smallest form factor with up to 1.5W (500mA) output power + Ultra wide illumination field angle (FWHM 155 degree) + Low thermal resistance:
QEB651 Surface Mount Infrared AlGaAs LED
QEB651 Surface Mount Infrared AlGaAs LED Features Wavelength 850nm High output Emission angle 30 o Surface mount miniature package Fast switching RoHS Compliant Package Dimensions Description The QEB651
Main Applications Entertainment Lighting Commercial Lighting
ProLight PK2N-3LNE-R8 3W High CRI Power LED Technical Datasheet Version: 1.2 Features High Color rendering index 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of
Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PJ2N-1FxE-2SC 1W Power LED Technical Datasheet Version: 1.5 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications T8/T5
Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 0B Product Description The XLamp XP-L LED is the highest performing discrete in Cree s High-Density (HD) class of LEDs, delivering the next generation
EHP-A07/UB01-P01. Technical Data Sheet High Power LED 1W
Technical Data Sheet High Power LED 1W Features feature of the device: small package with high efficiency View angle: 120. high luminous flux output: more than 9lm@350mA. ESD protection. soldering methods:
爍 (D) Shwo(D) 1W Series
Shwo(D) Introduction The Shwo(D) series is a surface-mount high-power device featuring high brightness combined with a compact size that is suitable for all kinds of lighting applications such as general
SMD Side View LEDs EAPL3810A17
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection. The product itself will remain
LedEngin, Inc. High Luminous Efficacy White Power LedFlex Emitter LZ4-00CW15. Key Features. Typical Applications. Description
High Luminous Efficacy White Power LedFlex Emitter LZ4-00CW15 Key Features High Luminous Efficacy 15W White LED Unique package design with ceramic substrate, integrated glass lens and Flex PCB New industry
Received. Revised record
Received MASS PRODUCTION PRELIMINARY CUSTOMER DESIGN DEVICE NO. : DHE-0001303 PAGE : 13 Revised record REV. DESCRIPTION RELEASE DATE 1 New spec 2010.12.01 2 1.Change format 2.Change IV CCT VF BIN 3.Change
SignalSure 150. Mid power solution AUTOMOTIVE. SignalSure 150 is a compact, surface-mount, mid power LED signaling
AUTOMOTIVE SignalSure 150 Mid power solution SignalSure 150 is a compact, surface-mount, mid power LED signaling solution that delivers an elevated standard of light output, flux density, and color uniformity.
SMD Top View LEDs EAPL4014WA1
SMD Top View LEDs Features Top View White LEDs Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection The product itself will remain within RoHS compliant version. Description
Main Applications Bending light Fog lamp Day Running light(drl) Cornering light Working light Warning light
ProLight AJ2N-xA1DF-x 0.5W Power LED Technical Datasheet Version: 1.1 Features Best thermal material solution of the world Best Moisture Sensitivity:JEDEC Level 1 RoHS compliant AEC-Q101 Qualified SAE/ECE/GB
Main Applications Entertainment Lighting Commercial Lighting
ProLight PK2N-3LWE-Bxx 3W White Power LED Technical Datasheet Version: 1.5 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture Sensitivity:JEDEC
No. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL: Lextar.com PC56H01 V4. Product Specification
Lextar.com Product Specification Approval Sheet Product Specification Product Part Number White SMD LED Issue Date 2013/11/01 Feature White SMD LED (L x W x H) of 5.6 x 3.0 x 0.77 mm ASNI binning Dice
Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch
ProLight PM2G-1LYE-WSL 1W 370nm + 400nm Power LED Technical Datasheet Version: 1.3 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Typical
PC33H01 V1. Product Specification. ANSI Ellipse Binning. Lextar.com
Lextar.com PC33H01 V1 Product Specification ANSI Ellipse Binning Approval Sheet PC33H01 V1 Product Specification (ANSI Ellipse binning) Product Part Number White SMD LED PC33H01 V1 Issue Date 2015/09/01
Product family data sheet
Cree XLamp XR-C LEDs Product family data sheet CLD-DS1 Rev 11B Product Description FEATURES Table of contents www.cree.com/xlamp The XLamp XR-C LED gives lighting designers the flexibility and performance
ProLight PK2N-3LLE-SD 3W UV Power LED Technical Datasheet Version: 1.8. We Provide the Light to the world 2016/10 DS-0009
ProLight PK2N-3LLE-SD 3W UV Power LED Technical Datasheet Version: 1.8 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture Sensitivity:JEDEC
ProLight PF2N-2FWE-04B High Power LED Technical Datasheet Version: 1.6. We Provide the Light to the world
ProLight PF2N-2FWE-04B High Power LED Technical Datasheet Version: 1.6 Features Small &compact size with high flux density Typical luminous flux:110lm @ 500mA Typical color temperature:6600k @ 500mA Optical
EAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PJDV-2FxE-3Rx 2W Power LED Technical Datasheet Version: 1.8 Features Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV High flux per LED Main Applications T8/T5 tube
Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PS2N-FFxE PS2N-FFxE-R8 0.5W Power LED Technical Datasheet Version: 2.0 Features Good color uniformity Industry s first lighting-class LED Low Voltage DC operated Instant light (less than 100ns)
EVERLIGHT ELECTRONICS CO., LTD.
Features Top View White LEDs Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering ESD protection Pb-free The product itself will remain within RoHS compliant
Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 1B Product Description The XLamp XP-L LED is the highest performing discrete in Cree s High-Density (HD) class of LEDs, delivering the next generation
Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting
ProLight PK2N-4LxE-SD 4W Power LED Technical Datasheet Version: 1.4 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture Sensitivity:JEDEC
Cree XLamp XP-C LEDs Data Sheet
Cree XLamp XP-C LEDs Data Sheet The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-C LED continues
SPEC NO: DSAJ6328 REV NO: V.1 DATE: JUL/31/2009 PAGE: 1 OF 9 APPROVED: WYNEC CHECKED:
XPower PRELIMINARY SPEC KADS-8070-2 SERIES Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Super high flux output and high luminance. Designed for high current
Cree XLamp ML-C LEDs. CLD-DS46 Rev 4I. Product family data sheet
Product family data sheet CLD-DS46 Rev 4I Cree XLamp ML-C LEDs Product Description The Cree XLamp ML-C LED brings lighting-class reliability and performance to 1/3-watt LEDs. The XLamp ML-C LED expands
Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PW2N-1FxE-N2SCR8 1W Power LED Technical Datasheet Version: 1.6 Features High Color rendering index Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns)
Cree XLamp XR-E LED PRODUCT FAMILY DATA SHEET FEATURES PRODUCT DESCRIPTION TABLE OF CONTENTS CLD DS-05 REV11
Cree XLamp XR-E LED PRODUCT FAMILY DATA SHEET CLD DS-5 REV11 PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented
SPEC NO: DSAJ6327 REV NO: V.1 DATE: JUL/31/2009 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED:
XPower PRELIMINARY SPEC KA-8070-2 SERIES Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES High efficient lightsource. Designed for high current operation. Low
PLW5630AGC Series. Product Datasheet. Decorative Light
PLW5630AGC Series Product Datasheet Bulb Down Light Decorative Light Tube Light Track Light Panel Light Introduction Plessey s ultra-high luminous PLW5630AGC SMT LEDs are designed for optical indicators,
Shwo. 3W Series. Product Specification. Introduction
Product Specification Shwo 3W Series 爍 Shwo [Shuo] is the English translation for the Chinese word meaning Twinkle and is often used as a description of stars or other bright, celestial objects as seen
Cree XLamp XQ-A LEDs. Table of Contents. CLD-DS135 Rev 1C. Product family data sheet
Cree XLamp XQ-A LEDs Product family data sheet CLD-DS135 Rev 1C Product Description The XLamp XQ-A LED brings a mid power, cost effective option to the proven, compact ceramic XQ package, enabling lighting
Cree XLamp XP-C LEDs. Table of Contents. CLD-DS19 Rev 12B. Product family data sheet
Cree XLamp XP-C LEDs Product family data sheet CLD-DS19 Rev 12B Product Description The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package
Cree XLamp XT-E HVW LEDs
Product family data sheet CLD-DS43 REV 7 Cree XLamp XT-E HVW LEDs Product Description The Cree XLamp XT-E High Voltage White LED provides the lightingclass performance and reliability of Cree XLamp LEDs
PLW3030EMB Series. Product Datasheet. Flood Light
PLW3030EMB Series Product Datasheet Street Light Flood Light High Bay Introduction Plessey EMC heat-resistant PLW3030EMB SMT LEDs are designed for linear tubes, spot lights, bulb replacements and other
MC-E White MC-E Color MC-E Dynamic White
Product family data sheet CLD-DS6 Rev L Cree XLamp MC-E LED MC-E White MC-E Color MC-E Dynamic White Product Description The XLamp MC-E LED is a family of lighting-class, multi-chip LEDs that provides
Product family data sheet
Product family data sheet CLD-DS56 Rev 0 Cree XLamp XP-E2 LEDs Product Description The XLamp XP-E2 LED builds on the unprecedented performance of the original XP-E by increasing lumen output up to 20%
Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural
ProLight PS2P-TFxE PS2P-TFxE-R8 0.2W Power LED Technical Datasheet Version: 1.0 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications
EL ALFS series. Preliminary ALFS1BD-PA07001L1-AM. Features. Applications. Package:Cool White LEDs on Ceramic substrate
EL ALFS series Preliminary Features Package:Cool White LEDs on Ceramic substrate Typ. PC Amber Wavelength:590~610 nm Typ. Luminous Flux:110 lm @ 700mA Viewing angle:cold White 120 o ESD up to 8KV MSL Level
Cree XLamp XP-L LEDs. Table of Contents. CLD-DS97 Rev 3C. Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 3C XP-L High Density LED XP-L High Intensity LED Product Description FEATURES Table of Contents www.cree.com/xlamp XLamp XP-L LEDs are available
Cree XLamp XR-C LEDs. CLD-DS10 Rev 12H. Product family data sheet
Cree XLamp XR-C LEDs Product family data sheet CLD-DS1 Rev 12H Product Description The XLamp XR-C LED gives lighting designers the flexibility and performance to create the next generation of LED lighting
AA2214VRBXS/A-TR-AMT 2.2 x 1.4 mm Surface Mount LED Lamp
2.2 x 1.4 mm Surface Mount LED Lamp DESCRIPTIONS The source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use
Cree XLamp XP-G2 LEDs
Cree XLamp XP-G2 LEDs Product family data sheet CLD-DS51 Rev 11C Product Description The XLamp XP-G2 LED builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20%
Cree XLamp XB-H LEDs. Table of Contents. CLD-DS90 Rev 1J. Product family data sheet
Product family data sheet CLD-DS90 Rev 1J Cree XLamp XB-H LEDs Product Description The XLamp XB-H LED delivers a breakthrough combination of lumen output and efficacy in a small package. Delivering more
Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting
ProLight PK2N-3LxE-SD 3W Power LED Technical Datasheet Version: 1.7 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture Sensitivity:JEDEC
Product family data sheet
Cree XLamp XR-C LEDs Product family data sheet CLD-DS1 Rev 12 Product Description FEATURES Table of contents www.cree.com/xlamp The XLamp XR-C LED gives lighting designers the flexibility and performance
Product Description. Table of Contents. CLD-DS30 Rev 11. Product family data sheet
Cree XLamp ML-E LEDs Product family data sheet CLD-DS3 Rev 11 Product Description The Cree XLamp ML-E LED brings lighting-class reliability and performance to ½-watt LEDs. The XLamp ML-E LED expands Cree
EVERLIGHT ELECTRONICS CO., LTD.
Features P-LCC-2 package. Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated
No. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL: Lextar.com PT30A02 V0. Product Specification
Lextar.com Approval Sheet Product White SMD LED Part Number Issue Date 2014/09/09 Feature White SMD LED (L x W x H) of 3.0 x 1.4 x 1.2 mm Dice Technology : InGaN Qualified according to JEDEC moisture sensitivity
SMD MID Power LED 67-22ST/KK2C-HXXXXXXXXA7A9Z3/2T(PRE)
Features PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant ANSI Binning Description The Everlight 67-22S package has high efficacy, high CRI, low
Cree J Series 2835 Value LEDs
Cree J Series 2835 Value LEDs Product family data sheet CLJ-DS22 Rev 0A Product Description J Series LEDs extend Cree s industry leading portfolio of lighting class LEDs to a broader set of applications.
SMD MID Power LED 67-22ST/KK3C-HXXXXXXXX5670Z8/2T
Features PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant ANSI Binning Description The Everlight 67-22S package has high efficacy, high CRI, low