Lecture 5 - Carrier generation and recombination (cont.) September 12, 2001
|
|
- Sherman Black
- 6 years ago
- Views:
Transcription
1 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-1 Contents: Lecture 5 - Carrier generation and recombination (cont.) September 12, G&R rates outside thermal equilibrium 2. Surface generation and recombination Reading assignment: del Alamo, Ch. 3, 3.4, 3.6
2 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-2 Key questions What happens to the balance between generation and generation when carrier concentrations are perturbed from thermal equilibrium values? How is this balance upset for each G&R mechanism? What are the key dependencies of this imbalance in G&R rates? How can surface G&R be characterized?
3 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture G&R rates outside equilibrium In thermal equilibrium: n = n o p = p o G oi G o = R oi = R o Outside thermal equilibrium (with carrier concentrations disturbed from thermal equilibrium values): n n o G i p p o R i G R n o n=no G o = R o G = R E v E v p o p=p o thermal equilibrium outside thermal equilibrium
4 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-4 If G R, carrier concentrations change in time. Useful to define net recombination rate, U: U = R G Reflects imbalance between internal G&R mechanisms: if R>G U>0, net recombination prevails if R<G U<0, net generation prevails If there are several mechanisms acting simultaneously, define: U i = R i G i and U =ΣU i What happens to the G&R rates of the various mechanisms outside thermal equilibrium?
5 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-5 a) Band-to-band optical G&R n o n>no G o,rad = R o,rad p o E v E v G rad = G o,rad R rad > R o,rad p>p o thermal equilibrium with excess carriers optical generation rate unchanged since number of available bonds unchanged: G rad = g rad = r rad n o p o optical recombination rate affected if electron and hole concentrations have changed: define net recombination rate: R rad = r rad np U rad = R rad G rad = r rad (np n o p o ) if np > n o p o, U rad > 0, net recombination prevails if np < n o p o, U rad < 0, net generation prevails note: wehaveassumedthatg rad and r rad are unchanged from equilibrium
6 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-6 b) Auger G&R Involving hot electrons: n o n>no G o,eeh = R o,eeh p o E v E v G eeh > G o,eeh R eeh > R o,eeh p>p o thermal equilibrium with excess carrier G eeh = g eeh n R eeh = r eeh n 2 p If relationship between g eeh and r eeh unchanged from TE: U eeh = R eeh G eeh = r eeh n(np n o p o ) Involving hot holes, similarly: Total Auger: U ehh = r ehh p(np n o p o ) U Auger =(r eeh n + r ehh p)(np n o p o )
7 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-7 c) Trap-assisted thermal G&R n o n>n o E t E v r o,ec =r o,ee r o,ec >r o,ee r o,hc =r o,he E t E v r o,hc >r o,he p o p>p o thermal equilibrium with excess carriers Out of equilibrium, if rate constants are not affected: r ec = c e n(n t n t ) r ee = e e n t = c e n i n t r hc = c h pn t r he = e h (N t n t )=c h n i (N t n t ) Recombination: capture of one electron + one hole net recombination rate = net electron capture rate = net hole capture rate U tr = r ec r ee = r hc r he From this, derive n t, and finally get U tr : U tr = np n o p o τ ho (n + n i )+τ eo (p + n i )
8 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-8 d) All processes combined U = U rad + U Auger + U tr
9 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-9 Special case: Low-level Injection Define excess carrier concentrations: n = n o + n p = p o + p LLI: Equilibrium minority carrier concentration overwhelmed but majority carrier concentration negligibly disturbed thermal equilibrium low-level injection high-level injection po ni n o log n' p' -forn-type: p o n p n o -forp-type: n o n p p o
10 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-10 In LLI: np n o p o = n o p o + n o p + p o n + n p n o p o (n o + p o )n All expressions of U follow the form: U i n τ i τ i is carrier lifetime of process i, a constant characteristic of each G&R process: τ rad = 1 r rad (n o + p o ) τ Auger 1 (r eeh n o + r ehh p o )(n o + p o ) τ tr τ hon o + τ eo p o n o + p o Under LLI, net recombination rate depends linearly on excess carrier concentration through a constant that is characteristic of material and temperature.
11 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-11 If all G&R processes are independent, combined process: with U n τ 1 τ =Σ1 τ i The G&R process with the smallest lifetime dominates. Physical meaning of carrier lifetime: U is rate of net recombination rate in unit volume in response to excess carrier concentration n (linear in n ) 1 U is mean time between recombination events in unit volume τ = n U is mean time between recombination event per excess carrier, or average time excess carrier will survive before recombining constant characteristic of material
12 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-12 For n-type material, n o p o : τ rad = 1 r rad n o τ Auger = 1 r eeh n 2 o τ tr = τ ho 1 N t log τ τ Auger τ rad τ tr n ō 2 n ō 1 log n o
13 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-13 Trap recombination (n-type material): Lifetime does not depend on n o [trap occupation probability rather insensitive to n o ] E t E F E v rhc is bottleneck Lifetime depends on trap concentration as τ N 1 t
14 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-14 Measurements of carrier lifetime in Si at 300 K 1E-1 1E-1 1E-2 1E-2 1E-3 1E-4 n-si T=300 K 1E-3 1E-4 p-si T=300 K carrier lifetime (s) 1E-5 1E-6 carrier lifetime (s) 1E-5 1E-6 1E-7 1E-7 1E-8 1/τ=7.8x10-13 N D +1.8x10-31 N D 2 1E-8 1/τ=3.5x10-13 N A +9.5x10-32 N A 2 1E-9 1E-9 1E-10 1E+13 1E+14 1E+15 1E+16 1E+17 1E+18 1E+19 1E+20 1E+21 donor concentration (cm-3) 1E-10 1E+13 1E+14 1E+15 1E+16 1E+17 1E+18 1E+19 1E+20 1E+21 acceptor concentration (cm-3) For low doping levels, N A,D < cm 3, τ tr dominates: τ depends on material quality and process wide data scatter N t correlated with N A,D τ N 1 A,D For high doping levels, N A,D > cm 3, τ Auger dominates: intrinsic recombination: tight data distribution τ N 2 A,D
15 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture Surface generation and recombination Surface: severe disruption of periodic crystal lots of traps (G&R centers) lots of traps semiconductor bulk Under LLI: U s Sn (s) S surface recombination velocity (cm/s) note units: U s (cm 2 s 1 )=S(cm s 1 ) n (cm 3 ) S is perpendicular component of velocity with which excess carriers dive into the surface to recombine.
16 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-16 Key conclusions Excess np product is driving force for net generation/recombination. Under low-level injection: with τ carrier lifetime. U n τ Carrier lifetime: mean time that an average excess carrier survives before recombining. In Si around 300K, τ N 1 for low N (trap-assisted recombination), τ N 2 for high N (Auger recombination). Order of magnitude of key parameters for Si at 300K: τ 1 ns 1 ms, depending on doping
17 6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 5-17 Self study Carrier extraction, generation lifetime
Lecture 4 - Carrier generation and recombination. February 12, 2007
6.720J/3.43J - Integrated Microelectronic Devices - Spring 2007 Lecture 4-1 Contents: Lecture 4 - Carrier generation and recombination 1. G&R mechanisms February 12, 2007 2. Thermal equilibrium: principle
More informationLecture 15 - The pn Junction Diode (I) I-V Characteristics. November 1, 2005
6.012 - Microelectronic Devices and Circuits - Fall 2005 Lecture 15-1 Lecture 15 - The pn Junction Diode (I) I-V Characteristics November 1, 2005 Contents: 1. pn junction under bias 2. I-V characteristics
More informationLecture 2 - Carrier Statistics in Equilibrium. September 5, 2002
6.720J/3.43J Integrated Microelectronic Devices Fall 2002 Lecture 21 Lecture 2 Carrier Statistics in Equilibrium Contents: September 5, 2002 1. Conduction and valence bands, bandgap, holes 2. Intrinsic
More informationLecture 10 - Carrier Flow (cont.) February 28, 2007
6.720J/3.43J Integrated Microelectronic Devices - Spring 2007 Lecture 10-1 Lecture 10 - Carrier Flow (cont.) February 28, 2007 Contents: 1. Minority-carrier type situations Reading assignment: del Alamo,
More informationLecture 9 - Carrier Drift and Diffusion (cont.), Carrier Flow. September 24, 2001
6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 9-1 Lecture 9 - Carrier Drift and Diffusion (cont.), Carrier Flow September 24, 2001 Contents: 1. Quasi-Fermi levels 2. Continuity
More informationLecture 35 - Bipolar Junction Transistor (cont.) November 27, Current-voltage characteristics of ideal BJT (cont.)
6.720J/3.43J - Integrated Microelectronic Devices - Fall 2002 Lecture 35-1 Lecture 35 - Bipolar Junction Transistor (cont.) November 27, 2002 Contents: 1. Current-voltage characteristics of ideal BJT (cont.)
More informationUniform excitation: applied field and optical generation. Non-uniform doping/excitation: diffusion, continuity
6.012 - Electronic Devices and Circuits Lecture 2 - Uniform Excitation; Non-uniform conditions Announcements Review Carrier concentrations in TE given the doping level What happens above and below room
More informationLecture 20 - p-n Junction (cont.) October 21, Non-ideal and second-order effects
6.70J/3.43J - Integrated Microelectronic Devices - Fall 00 Lecture 0-1 Lecture 0 - p-n Junction (cont.) October 1, 00 Contents: 1. Non-ideal and second-order effects Reading assignment: del Alamo, Ch.
More informationLecture 8 - Carrier Drift and Diffusion (cont.), Carrier Flow. February 21, 2007
6.720J/3.43J - Integrated Microelectronic Devices - Spring 2007 Lecture 8-1 Lecture 8 - Carrier Drift and Diffusion (cont.), Carrier Flow February 21, 2007 Contents: 1. Quasi-Fermi levels 2. Continuity
More informationLecture 2 - Carrier Statistics in Equilibrium. February 8, 2007
6.720J/3.43J Integrated Microelectronic Devices Spring 2007 Lecture 21 Lecture 2 Carrier Statistics in Equilibrium Contents: February 8, 2007 1. Conduction and valence bands, bandgap, holes 2. Intrinsic
More informationESE 372 / Spring 2013 / Lecture 5 Metal Oxide Semiconductor Field Effect Transistor
Metal Oxide Semiconductor Field Effect Transistor V G V G 1 Metal Oxide Semiconductor Field Effect Transistor We will need to understand how this current flows through Si What is electric current? 2 Back
More informationPN Junction
P Junction 2017-05-04 Definition Power Electronics = semiconductor switches are used Analogue amplifier = high power loss 250 200 u x 150 100 u Udc i 50 0 0 50 100 150 200 250 300 350 400 i,u dc i,u u
More informationLecture 13 - Carrier Flow (cont.), Metal-Semiconductor Junction. October 2, 2002
6.72J/3.43J - Integrated Microelectronic Devices - Fall 22 Lecture 13-1 Contents: Lecture 13 - Carrier Flow (cont.), Metal-Semiconductor Junction October 2, 22 1. Transport in space-charge and high-resistivity
More informationSemiconductor Physics. Lecture 3
Semiconductor Physics Lecture 3 Intrinsic carrier density Intrinsic carrier density Law of mass action Valid also if we add an impurity which either donates extra electrons or holes the number of carriers
More informationECE 606 Homework Week 7 Mark Lundstrom Purdue University (revised 2/25/13) e E i! E T
ECE 606 Homework Week 7 Mark Lundstrom Purdue University (revised 2/25/13) 1) Consider an n- type semiconductor for which the only states in the bandgap are donor levels (i.e. ( E T = E D ). Begin with
More informationLecture 15: Optoelectronic devices: Introduction
Lecture 15: Optoelectronic devices: Introduction Contents 1 Optical absorption 1 1.1 Absorption coefficient....................... 2 2 Optical recombination 5 3 Recombination and carrier lifetime 6 3.1
More informationSession 5: Solid State Physics. Charge Mobility Drift Diffusion Recombination-Generation
Session 5: Solid State Physics Charge Mobility Drift Diffusion Recombination-Generation 1 Outline A B C D E F G H I J 2 Mobile Charge Carriers in Semiconductors Three primary types of carrier action occur
More informationCarrier Recombination
Notes for ECE-606: Spring 013 Carrier Recombination Professor Mark Lundstrom Electrical and Computer Engineering Purdue University, West Lafayette, IN USA lundstro@purdue.edu /19/13 1 carrier recombination-generation
More informationLecture 1. OUTLINE Basic Semiconductor Physics. Reading: Chapter 2.1. Semiconductors Intrinsic (undoped) silicon Doping Carrier concentrations
Lecture 1 OUTLINE Basic Semiconductor Physics Semiconductors Intrinsic (undoped) silicon Doping Carrier concentrations Reading: Chapter 2.1 EE105 Fall 2007 Lecture 1, Slide 1 What is a Semiconductor? Low
More informationRecombination: Depletion. Auger, and Tunnelling
Recombination: Depletion Region, Bulk, Radiative, Auger, and Tunnelling Ch 140 Lecture Notes #13 Prepared by David Gleason We assume: Review of Depletion Region Recombination Flat Quantum Fermi Levels
More informationLecture 17 - p-n Junction. October 11, Ideal p-n junction in equilibrium 2. Ideal p-n junction out of equilibrium
6.72J/3.43J - Integrated Microelectronic Devices - Fall 22 Lecture 17-1 Lecture 17 - p-n Junction October 11, 22 Contents: 1. Ideal p-n junction in equilibrium 2. Ideal p-n junction out of equilibrium
More informationLecture 7 - Carrier Drift and Diffusion (cont.) February 20, Non-uniformly doped semiconductor in thermal equilibrium
6.720J/3.43J - Integrated Microelectronic Devices - Spring 2007 Lecture 7-1 Lecture 7 - Carrier Drift and Diffusion (cont.) February 20, 2007 Contents: 1. Non-uniformly doped semiconductor in thermal equilibrium
More informationQuiz #1 Practice Problem Set
Name: Student Number: ELEC 3908 Physical Electronics Quiz #1 Practice Problem Set? Minutes January 22, 2016 - No aids except a non-programmable calculator - All questions must be answered - All questions
More informationL5: Surface Recombination, Continuity Equation & Extended Topics tanford University
L5: Surface Recombination, Continuity Equation & Extended Topics EE 216 : Aneesh Nainani 1 Announcements Project Select topic by Jan 29 (Tuesday) 9 topics, maximum 4 students per topic Quiz Thursday (Jan
More informationLecture 8 - Carrier Drift and Diffusion (cont.) September 21, 2001
6.720J/3.43J - Integrated Microelectronic Devices - Fall 2001 Lecture 8-1 Lecture 8 - Carrier Drift and Diffusion (cont.) September 21, 2001 Contents: 1. Non-uniformly doped semiconductor in thermal equilibrium
More informationLecture 16 - The pn Junction Diode (II) Equivalent Circuit Model. April 8, 2003
6.012 - Microelectronic Devices and Circuits - Spring 2003 Lecture 16-1 Lecture 16 - The pn Junction Diode (II) Equivalent Circuit Model April 8, 2003 Contents: 1. I-V characteristics (cont.) 2. Small-signal
More informationCarriers Concentration in Semiconductors - V. Prof.P. Ravindran, Department of Physics, Central University of Tamil Nadu, India
Carriers Concentration in Semiconductors - V 1 Prof.P. Ravindran, Department of Physics, Central University of Tamil Nadu, India http://folk.uio.no/ravi/semi2013 Motion and Recombination of Electrons and
More informationLecture 2. Semiconductor Physics. Sunday 4/10/2015 Semiconductor Physics 1-1
Lecture 2 Semiconductor Physics Sunday 4/10/2015 Semiconductor Physics 1-1 Outline Intrinsic bond model: electrons and holes Charge carrier generation and recombination Intrinsic semiconductor Doping:
More information3.1 Introduction to Semiconductors. Y. Baghzouz ECE Department UNLV
3.1 Introduction to Semiconductors Y. Baghzouz ECE Department UNLV Introduction In this lecture, we will cover the basic aspects of semiconductor materials, and the physical mechanisms which are at the
More informationECE 340 Lecture 6 : Intrinsic and Extrinsic Material I Class Outline:
ECE 340 Lecture 6 : Intrinsic and Extrinsic Material I Class Outline: Effective Mass Intrinsic Material Extrinsic Material Things you should know when you leave Key Questions What is the physical meaning
More informationRecitation 2: Equilibrium Electron and Hole Concentration from Doping
Recitation : Equilibrium Electron and Hole Concentration from Doping Here is a list of new things we learned yesterday: 1. Electrons and Holes. Generation and Recombination 3. Thermal Equilibrium 4. Law
More informationCh. 2: Energy Bands And Charge Carriers In Semiconductors
Ch. 2: Energy Bands And Charge Carriers In Semiconductors Discrete energy levels arise from balance of attraction force between electrons and nucleus and repulsion force between electrons each electron
More informationLecture 19 - p-n Junction (cont.) October 18, Ideal p-n junction out of equilibrium (cont.) 2. pn junction diode: parasitics, dynamics
6.720J/3.43J - Integrated Microelectronic Devices - Fall 2002 Lecture 19-1 Lecture 19 - p-n Junction (cont.) October 18, 2002 Contents: 1. Ideal p-n junction out of equilibrium (cont.) 2. pn junction diode:
More informationLuminescence Process
Luminescence Process The absorption and the emission are related to each other and they are described by two terms which are complex conjugate of each other in the interaction Hamiltonian (H er ). In an
More informationLecture 1 - Electrons, Photons and Phonons. September 4, 2002
6.720J/3.43J - Integrated Microelectronic Devices - Fall 2002 Lecture 1-1 Lecture 1 - Electrons, Photons and Phonons Contents: September 4, 2002 1. Electronic structure of semiconductors 2. Electron statistics
More informationMTLE-6120: Advanced Electronic Properties of Materials. Intrinsic and extrinsic semiconductors. Reading: Kasap:
MTLE-6120: Advanced Electronic Properties of Materials 1 Intrinsic and extrinsic semiconductors Reading: Kasap: 5.1-5.6 Band structure and conduction 2 Metals: partially filled band(s) i.e. bands cross
More informationOctob er 10, Quiz #1
Fall 2002 6.720J/3.43J Integrated Microelectronic Devices Prof. J. A. del Alamo Octob er 10, 2002 - Quiz #1 Name: General guidelines (please read carefully b efore starting): Make sure to write your name
More informationSemiconductor Physics
Semiconductor Physics Motivation Is it possible that there might be current flowing in a conductor (or a semiconductor) even when there is no potential difference supplied across its ends? Look at the
More informationSpring Semester 2012 Final Exam
Spring Semester 2012 Final Exam Note: Show your work, underline results, and always show units. Official exam time: 2.0 hours; an extension of at least 1.0 hour will be granted to anyone. Materials parameters
More informationSemiconductor device structures are traditionally divided into homojunction devices
0. Introduction: Semiconductor device structures are traditionally divided into homojunction devices (devices consisting of only one type of semiconductor material) and heterojunction devices (consisting
More informationn N D n p = n i p N A
Summary of electron and hole concentration in semiconductors Intrinsic semiconductor: E G n kt i = pi = N e 2 0 Donor-doped semiconductor: n N D where N D is the concentration of donor impurity Acceptor-doped
More informationECE 340 Lecture 27 : Junction Capacitance Class Outline:
ECE 340 Lecture 27 : Junction Capacitance Class Outline: Breakdown Review Junction Capacitance Things you should know when you leave M.J. Gilbert ECE 340 Lecture 27 10/24/11 Key Questions What types of
More informationEE 346: Semiconductor Devices. 02/08/2017 Tewodros A. Zewde 1
EE 346: Semiconductor Devices 02/08/2017 Tewodros A. Zewde 1 DOPANT ATOMS AND ENERGY LEVELS Without help the total number of carriers (electrons and holes) is limited to 2ni. For most materials, this is
More informationLecture 3b. Bonding Model and Dopants. Reading: (Cont d) Notes and Anderson 2 sections
Lecture 3b Bonding Model and Dopants Reading: (Cont d) Notes and Anderson 2 sections 2.3-2.7 The need for more control over carrier concentration Without help the total number of carriers (electrons and
More informationThis is the 15th lecture of this course in which we begin a new topic, Excess Carriers. This topic will be covered in two lectures.
Solid State Devices Dr. S. Karmalkar Department of Electronics and Communication Engineering Indian Institute of Technology, Madras Lecture - 15 Excess Carriers This is the 15th lecture of this course
More informationUNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences. EECS 130 Professor Ali Javey Fall 2006
UNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences EECS 130 Professor Ali Javey Fall 2006 Midterm I Name: Closed book. One sheet of notes is allowed.
More informationChapter 7. The pn Junction
Chapter 7 The pn Junction Chapter 7 PN Junction PN junction can be fabricated by implanting or diffusing donors into a P-type substrate such that a layer of semiconductor is converted into N type. Converting
More informationECE 442. Spring, Lecture -2
ECE 442 Power Semiconductor Devices and Integrated circuits Spring, 2006 University of Illinois at Chicago Lecture -2 Semiconductor physics band structures and charge carriers 1. What are the types of
More informationEE 3329 Electronic Devices Syllabus ( Extended Play )
EE 3329 - Electronic Devices Syllabus EE 3329 Electronic Devices Syllabus ( Extended Play ) The University of Texas at El Paso The following concepts can be part of the syllabus for the Electronic Devices
More informationLecture 2. Introduction to semiconductors Structures and characteristics in semiconductors
Lecture 2 Introduction to semiconductors Structures and characteristics in semiconductors Semiconductor p-n junction Metal Oxide Silicon structure Semiconductor contact Literature Glen F. Knoll, Radiation
More informationLecture 2. Introduction to semiconductors Structures and characteristics in semiconductors
Lecture 2 Introduction to semiconductors Structures and characteristics in semiconductors Semiconductor p-n junction Metal Oxide Silicon structure Semiconductor contact Literature Glen F. Knoll, Radiation
More informationReview of Semiconductor Fundamentals
ECE 541/ME 541 Microelectronic Fabrication Techniques Review of Semiconductor Fundamentals Zheng Yang (ERF 3017, email: yangzhen@uic.edu) Page 1 Semiconductor A semiconductor is an almost insulating material,
More informationKey Questions. ECE 340 Lecture 6 : Intrinsic and Extrinsic Material I 9/10/12. Class Outline: Effective Mass Intrinsic Material
9/1/1 ECE 34 Lecture 6 : Intrinsic and Extrinsic Material I Class Outline: Things you should know when you leave Key Questions What is the physical meaning of the effective mass What does a negative effective
More information3 Minority carrier profiles (the hyperbolic functions) Consider a
Microelectronic Devices and Circuits October 9, 013 - Homework #3 Due Nov 9, 013 1 Te pn junction Consider an abrupt Si pn + junction tat as 10 15 acceptors cm -3 on te p-side and 10 19 donors on te n-side.
More informationElectronic Circuits for Mechatronics ELCT 609 Lecture 2: PN Junctions (1)
Electronic Circuits for Mechatronics ELCT 609 Lecture 2: PN Junctions (1) Assistant Professor Office: C3.315 E-mail: eman.azab@guc.edu.eg 1 Electronic (Semiconductor) Devices P-N Junctions (Diodes): Physical
More informationFundamentals of Semiconductor Physics
Fall 2007 Fundamentals of Semiconductor Physics 万 歆 Zhejiang Institute of Modern Physics xinwan@zimp.zju.edu.cn http://zimp.zju.edu.cn/~xinwan/ Transistor technology evokes new physics The objective of
More informationLecture 7: Extrinsic semiconductors - Fermi level
Lecture 7: Extrinsic semiconductors - Fermi level Contents 1 Dopant materials 1 2 E F in extrinsic semiconductors 5 3 Temperature dependence of carrier concentration 6 3.1 Low temperature regime (T < T
More informationcollisions of electrons. In semiconductor, in certain temperature ranges the conductivity increases rapidly by increasing temperature
1.9. Temperature Dependence of Semiconductor Conductivity Such dependence is one most important in semiconductor. In metals, Conductivity decreases by increasing temperature due to greater frequency of
More informationLecture 7 - PN Junction and MOS Electrostatics (IV) Electrostatics of Metal-Oxide-Semiconductor Structure. September 29, 2005
6.12 - Microelectronic Devices and Circuits - Fall 25 Lecture 7-1 Lecture 7 - PN Junction and MOS Electrostatics (IV) Electrostatics of Metal-Oide-Semiconductor Structure September 29, 25 Contents: 1.
More informationEECS130 Integrated Circuit Devices
EECS130 Integrated Circuit Devices Professor Ali Javey 8/30/2007 Semiconductor Fundamentals Lecture 2 Read: Chapters 1 and 2 Last Lecture: Energy Band Diagram Conduction band E c E g Band gap E v Valence
More informationLecture 4 - PN Junction and MOS Electrostatics (I) Semiconductor Electrostatics in Thermal Equilibrium September 20, 2005
6.012 - Microelectronic Devices and Circuits - Fall 2005 Lecture 4-1 Contents: Lecture 4 - PN Junction and MOS Electrostatics (I) Semiconductor Electrostatics in Thermal Equilibrium September 20, 2005
More informationSemiconductor Devices and Circuits Fall Midterm Exam. Instructor: Dr. Dietmar Knipp, Professor of Electrical Engineering. Name: Mat. -Nr.
Semiconductor Devices and Circuits Fall 2003 Midterm Exam Instructor: Dr. Dietmar Knipp, Professor of Electrical Engineering Name: Mat. -Nr.: Guidelines: Duration of the Midterm: 1 hour The exam is a closed
More informationDiodes. anode. cathode. cut-off. Can be approximated by a piecewise-linear-like characteristic. Lecture 9-1
Diodes mplest nonlinear circuit element Basic operation sets the foundation for Bipolar Junction Transistors (BJTs) Also present in Field Effect Transistors (FETs) Ideal diode characteristic anode cathode
More informationCarriers Concentration and Current in Semiconductors
Carriers Concentration and Current in Semiconductors Carrier Transport Two driving forces for carrier transport: electric field and spatial variation of the carrier concentration. Both driving forces lead
More informationLecture 16 The pn Junction Diode (III)
Lecture 16 The pn Junction iode (III) Outline I V Characteristics (Review) Small signal equivalent circuit model Carrier charge storage iffusion capacitance Reading Assignment: Howe and Sodini; Chapter
More informationpn JUNCTION THE SHOCKLEY MODEL
The pn Junction: The Shockley Model ( S. O. Kasap, 1990-001) 1 pn JUNCTION THE SHOCKLEY MODEL Safa Kasap Department of Electrical Engineering University of Saskatchewan Canada Although the hole and its
More informationIn this block the two transport mechanisms will be discussed: diffusion and drift.
ET3034TUx - 2.3.3 Transport of charge carriers What are the charge carrier transport principles? In this block the two transport mechanisms will be discussed: diffusion and drift. We will discuss that
More informationLecture 18 - The Bipolar Junction Transistor (II) Regimes of Operation. November 10, 2005
6.012 - Microelectronic Devices and ircuits - Fall 2005 Lecture 18-1 Lecture 18 - The ipolar Junction Transistor (II) ontents: 1. Regimes of operation. Regimes of Operation November 10, 2005 2. Large-signal
More informationElectronic Devices and Circuits Lecture 5 - p-n Junction Injection and Flow - Outline
6.012 - Electronic Devices and Circuits Lecture 5 - p-n Junction Injection and Flow - Outline Review Depletion approimation for an abrupt p-n junction Depletion charge storage and depletion capacitance
More informationECE 340 Lecture 21 : P-N Junction II Class Outline:
ECE 340 Lecture 21 : P-N Junction II Class Outline: Contact Potential Equilibrium Fermi Levels Things you should know when you leave Key Questions What is the contact potential? Where does the transition
More informationAtoms? All matters on earth made of atoms (made up of elements or combination of elements).
Chapter 1 Atoms? All matters on earth made of atoms (made up of elements or combination of elements). Atomic Structure Atom is the smallest particle of an element that can exist in a stable or independent
More informationEE 6313 Homework Assignments
EE 6313 Homework Assignments 1. Homework I: Chapter 1: 1.2, 1.5, 1.7, 1.10, 1.12 [Lattice constant only] (Due Sept. 1, 2009). 2. Homework II: Chapter 1, 2: 1.17, 2.1 (a, c) (k = π/a at zone edge), 2.3
More informationModeling Recombination in Solar Cells
Macalester Journal of Physics and Astronomy Volume 6 Issue 1 Spring 2018 Article 2 Modeling Recombination in Solar Cells Paul Chery Macalester College, pchery@macalester.edu Abstract Solar cells are a
More informationChapter 12: Semiconductors
Chapter 12: Semiconductors Bardeen & Shottky January 30, 2017 Contents 1 Band Structure 4 2 Charge Carrier Density in Intrinsic Semiconductors. 6 3 Doping of Semiconductors 12 4 Carrier Densities in Doped
More informationLecture 8 PN Junction and MOS Electrostatics (V) Electrostatics of Metal Oxide Semiconductor Structure (cont.) October 4, 2005
6.12 Microelectronic Devices and Circuits Fall 25 Lecture 8 1 Lecture 8 PN Junction and MOS Electrostatics (V) Electrostatics of Metal Oide Semiconductor Structure (cont.) Contents: October 4, 25 1. Overview
More informationET3034TUx Utilization of band gap energy
ET3034TUx - 3.3.1 - Utilization of band gap energy In the last two weeks we have discussed the working principle of a solar cell and the external parameters that define the performance of a solar cell.
More informationThe German University in Cairo. Faculty of Information Engineering & Technology Semiconductors (Elct 503) Electronics Department Fall 2014
The German University in Cairo th Electronics 5 Semester Faculty of Information Engineering & Technology Semiconductors (Elct 503) Electronics Department Fall 2014 Problem Set 3 1- a) Find the resistivity
More informationEE105 Fall 2015 Microelectronic Devices and Circuits: Semiconductor Fabrication and PN Junctions
EE105 Fall 2015 Microelectronic Devices and Circuits: Semiconductor Fabrication and PN Junctions Prof. Ming C. Wu wu@eecs.berkeley.edu 511 Sutardja Dai Hall (SDH) 1 pn Junction p-type semiconductor in
More informationSemiconductor Physics fall 2012 problems
Semiconductor Physics fall 2012 problems 1. An n-type sample of silicon has a uniform density N D = 10 16 atoms cm -3 of arsenic, and a p-type silicon sample has N A = 10 15 atoms cm -3 of boron. For each
More information6.012 Electronic Devices and Circuits
Page 1 of 1 YOUR NAME Department of Electrical Engineering and Computer Science Massachusetts Institute of Technology 6.12 Electronic Devices and Circuits Exam No. 1 Wednesday, October 7, 29 7:3 to 9:3
More informationLecture 3: Semiconductors and recombination. Prof Ken Durose, University of Liverpool
Lecture 3: Semiconductors and recombination Prof Ken Durose, University of Liverpool Outline semiconductors and 1. Band gap representations 2. Types of semiconductors -Adamantine semiconductors (Hume -Rothery
More informationPHOTOVOLTAICS Fundamentals
PHOTOVOLTAICS Fundamentals PV FUNDAMENTALS Semiconductor basics pn junction Solar cell operation Design of silicon solar cell SEMICONDUCTOR BASICS Allowed energy bands Valence and conduction band Fermi
More informationChapter 1 Overview of Semiconductor Materials and Physics
Chapter 1 Overview of Semiconductor Materials and Physics Professor Paul K. Chu Conductivity / Resistivity of Insulators, Semiconductors, and Conductors Semiconductor Elements Period II III IV V VI 2 B
More informationSemiconductor physics I. The Crystal Structure of Solids
Lecture 3 Semiconductor physics I The Crystal Structure of Solids 1 Semiconductor materials Types of solids Space lattices Atomic Bonding Imperfection and doping in SOLIDS 2 Semiconductor Semiconductors
More informationFinal Examination EE 130 December 16, 1997 Time allotted: 180 minutes
Final Examination EE 130 December 16, 1997 Time allotted: 180 minutes Problem 1: Semiconductor Fundamentals [30 points] A uniformly doped silicon sample of length 100µm and cross-sectional area 100µm 2
More informationKATIHAL FİZİĞİ MNT-510
KATIHAL FİZİĞİ MNT-510 YARIİLETKENLER Kaynaklar: Katıhal Fiziği, Prof. Dr. Mustafa Dikici, Seçkin Yayıncılık Katıhal Fiziği, Şakir Aydoğan, Nobel Yayıncılık, Physics for Computer Science Students: With
More informationConsider a uniformly doped PN junction, in which one region of the semiconductor is uniformly doped with acceptor atoms and the adjacent region is
CHAPTER 7 The PN Junction Consider a uniformly doped PN junction, in which one region of the semiconductor is uniformly doped with acceptor atoms and the adjacent region is uniformly doped with donor atoms.
More informationLecture 2 Electrons and Holes in Semiconductors
EE 471: Transport Phenomena in Solid State Devices Spring 2018 Lecture 2 Electrons and Holes in Semiconductors Bryan Ackland Department of Electrical and Computer Engineering Stevens Institute of Technology
More informationElectron Energy, E E = 0. Free electron. 3s Band 2p Band Overlapping energy bands. 3p 3s 2p 2s. 2s Band. Electrons. 1s ATOM SOLID.
Electron Energy, E Free electron Vacuum level 3p 3s 2p 2s 2s Band 3s Band 2p Band Overlapping energy bands Electrons E = 0 1s ATOM 1s SOLID In a metal the various energy bands overlap to give a single
More informationSolid State Physics SEMICONDUCTORS - IV. Lecture 25. A.H. Harker. Physics and Astronomy UCL
Solid State Physics SEMICONDUCTORS - IV Lecture 25 A.H. Harker Physics and Astronomy UCL 9.9 Carrier diffusion and recombination Suppose we have a p-type semiconductor, i.e. n h >> n e. (1) Create a local
More informationECE 340 Lecture 39 : MOS Capacitor II
ECE 340 Lecture 39 : MOS Capacitor II Class Outline: Effects of Real Surfaces Threshold Voltage MOS Capacitance-Voltage Analysis Things you should know when you leave Key Questions What are the effects
More informationThe 5 basic equations of semiconductor device physics: We will in general be faced with finding 5 quantities:
6.012 - Electronic Devices and Circuits Solving the 5 basic equations - 2/12/08 Version The 5 basic equations of semiconductor device physics: We will in general be faced with finding 5 quantities: n(x,t),
More informationA. OTHER JUNCTIONS B. SEMICONDUCTOR HETEROJUNCTIONS -- MOLECULES AT INTERFACES: ORGANIC PHOTOVOLTAIC BULK HETEROJUNCTION DYE-SENSITIZED SOLAR CELL
A. OTHER JUNCTIONS B. SEMICONDUCTOR HETEROJUNCTIONS -- MOLECULES AT INTERFACES: ORGANIC PHOTOVOLTAIC BULK HETEROJUNCTION DYE-SENSITIZED SOLAR CELL February 9 and 14, 2012 The University of Toledo, Department
More informationLecture 18 - The Bipolar Junction Transistor (II) Regimes of Operation April 19, 2001
6.012 - Microelectronic Devices and ircuits - Spring 2001 Lecture 18-1 Lecture 18 - The ipolar Junction Transistor (II) Regimes of Operation April 19, 2001 ontents: 1. Regimes of operation. 2. Large-signal
More information16EC401 BASIC ELECTRONIC DEVICES UNIT I PN JUNCTION DIODE. Energy Band Diagram of Conductor, Insulator and Semiconductor:
16EC401 BASIC ELECTRONIC DEVICES UNIT I PN JUNCTION DIODE Energy bands in Intrinsic and Extrinsic silicon: Energy Band Diagram of Conductor, Insulator and Semiconductor: 1 2 Carrier transport: Any motion
More informationSession 6: Solid State Physics. Diode
Session 6: Solid State Physics Diode 1 Outline A B C D E F G H I J 2 Definitions / Assumptions Homojunction: the junction is between two regions of the same material Heterojunction: the junction is between
More informationEE 346: Semiconductor Devices
EE 346: Semiconductor Devices Lecture - 6 02/06/2017 Tewodros A. Zewde 1 DENSTY OF STATES FUNCTON Since current is due to the flow of charge, an important step in the process is to determine the number
More informationElectrical Characteristics of MOS Devices
Electrical Characteristics of MOS Devices The MOS Capacitor Voltage components Accumulation, Depletion, Inversion Modes Effect of channel bias and substrate bias Effect of gate oide charges Threshold-voltage
More informationChalcogenide semiconductor research and applications. Tutorial 2: Thin film characterization. Rafael Jaramillo Massachusetts Institute of Technology
Chalcogenide semiconductor research and applications Tutorial 2: Thin film characterization Rafael Jaramillo Massachusetts Institute of Technology Section 1: Measuring composition August 20, 2017 Jaramillo
More informationL03: pn Junctions, Diodes
8/30/2012 Page 1 of 5 Reference:C:\Users\Bernhard Boser\Documents\Files\Lib\MathCAD\Default\defaults.mcd L03: pn Junctions, Diodes Intrinsic Si Q: What are n, p? Q: Is the Si charged? Q: How could we make
More information