Radial Aluminium Electrolytic Capacitors
|
|
|
- Quentin O’Neal’
- 6 years ago
- Views:
Transcription
1 Radial Aluminium Electrolytic Capacitors Low ESR / Z, 105 C Low ESR / Z, Endurance 2.500h to h at 105 C Rated voltage range: 6,3V to 100V, Nominal capacitance range: 0,47µF to µF Size range: Ø 5,5 x 12,0mm to Ø 18,0 x 36,5mm RoHS compliant Special types on request Specifications Temperature range - 55 C to +105 C Rated voltage range 6,3V to 100V Capacitance tolerance ±20% Leakage current I ra Dissipation factor (tan δ) Low temperature - characteristics Z max-factor Endurance Shelf life Surge voltage test Characteristics (at 20 C, 100Hz) I ra=0,002 C R V R + 3µA, (I ra [µa], C R: Rated capacitance [µf], V R: Rated voltage [V]) (at 20 C, 5 minutes) Rated voltage (V R) 6,3V 10V 16V 25V 35V 50V 63V 100V tan δ max 0,19 0,19 0,16 0,14 0,12 0,08 0,07 0,07 (at 20 C, 100Hz) When nominal capacitance exceeds 1.000µF, add 0,02 to the valve above for each 1.000µF increase Rated voltage (V R) 6,3V 10V 16V 25V 35V 50V 63V 100V Z(-40 C)/(20 C) (100Hz) The following specifications shall be satisfied when the are restored to 20 C after the rated voltage is applied for hours to hours at 105 C. Capacitance change C/C0 ±20% D.F. (tan δ) tan δ +200% of the initial specification value Leakage current (I ra) I ra the initial specified value The following specifications shall be satisfied when the are restored to 20 C after exposing them for hours at 105 C without voltage applied. Capacitance change C/C0 ±20% D.F. (tan δ) tan δ +200% of the initial specification value Leakage current (I ra) I ra +200% of the initial specification value The shall be subjected to cycles each consisting of charging with the specified surge voltage for 30±5 seconds through a protective resistor (R=0,1/C R) and opencircuiting for 330 seconds at 105 C. The following specifications shall be satisfied when the are restored to 20 C. Rated voltage (V R) 6,3V 10V 16V 25V 35V 50V 63V 100V Surge voltage (V S) 7,2V 11,5V 18,4V 28,8V 40,3V 57,5V 72,5V 115V Appearance No significant damage Capacitance change C/C0 ±10% D.F. (tan δ) tan δ the initial specified value Leakage current (I ra) I ra the initial specified value FROLYT Kondensatoren und Bauelemente GmbH ISO 9001 VDA 6.1 Tel.: Fax: Website: info@frolyt.de Home adress: Dammstraße 46 D Freiberg/Saxony
2 Aluminium-electrolytic with special low ESR / Z, Small dimensions, Insulated, Polarized, Pulse proof, Endurance at least 2.500h to h at +105 C Generic specification: DIN EN Sectional specification: DIN EN without quality assessment Operating temperature range: - 55 C to +105 C Climatic category: 55/105/56 The identification of polarity is carried out by the stamp image. Taping specifications on request Capacitance range: ±20% Surge voltage V S: V S = 1,15. V R Leakage current I ra: measured at V R at +20 C I ra 0,006 C R V R + 3µA (typical after 1 min.) I ra 0,002 C R V R + 3µA (after 5 min.) C R: Rated capacitance (µf) V R: Rated voltage (V) ( ) Ø5,5 and Ø6,8 = L-0,5; Ø18,0 = L±1 (x) other wire length on request Dimensions (mm) D 5,5 6,8 8,7 10,0 12,5 16,5 18,0 d 1 wire Ø 0,6 0,6 0,6 0,6 0,8 (*) 0,8 0,8 e ±0,5 2,5 2,5 5,0 5,0 5,0 7,5 7,5 Endurance at least Ambient temperature Ø 8,7 mm Ø 10,0 mm Ø 12,5 mm Ø 16,5 mm Ø 18,0 mm +40 C h h h h h +85 C h h h h h +105 C 2.500h 3.000h 5.000h 8.000h h (*) 0,6 mm on request Dimensions Overview D x L Capacitance Rated voltage V R [V] C R [µf] 6, Lötbereich ,47 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 1,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 1,5 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 2,2 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 3,3 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 4,7 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 10 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 15 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 22 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 8,7 x 12,7 33 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 10,0 x 12,7 47 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 10,0 x 16,5 68 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 10,0 x 21, ,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 12,5 x 21, ,5 x 12,0 5,5 x 12,0 6,8 x 12,5 6,8 x 12,5 8,7 x 12,7 10,0 x 12,7 10,0 x 16,5 12,5 x 25, ,8 x 12,5 6,8 x 12,5 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 21,0 16,5 x 26, ,7 x 12,7 8,7 x 12,7 8,7 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 16,5 x 26, ,7 x 12,7 8,7 x 12,7 10,0 x 12,7 2 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 30, ,0 x 12,7 10,0 x 12,7 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 16,5 x 22,0 16,5 x 26,0 18,0 x 30,
3 Dimensions Overview D x L Capacitance Rated voltage V R [V] C R [µf] 6, ,0 x 16,5 10,0 x 16,5 10,0 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 26,0 16,5 x 30,0 18,0 x 36, ,0 x 21,0 10,0 x 21,0 12,5 x 25,0 16,5 x 26,0 16,5 x 26,0 16,5 x 30,0 18,0 x 30, ,5 x 21,0 12,5 x 21,0 12,5 x 25,0 16,5 x 26,0 16,5 x 30,0 16,5 x 36,5 18,0 x 36, ,5 x 25,0 12,5 x 25,0 16,5 x 26,0 16,5 x 30,0 16,5 x 36,5 18,0 x 36, ,5 x 22,0 16,5 x 26,0 16,5 x 30,0 16,5 x 36,5 18,0 x 36, ,5 x 26,0 16,5 x 30,0 16,5 x 36,5 18,0 x 36, ,5 x 36,5 16,5 x 36,5 18,0 x 30, ,0 x 30,0 18,0 x 36, ,0 x 36,5 Rated Rated Size tan δ Z [Ω] 100kHz I~ [ma]* cap. voltage D x L [mm] 100Hz +20 C +20 C -10 C -40 C 100kHz C R [µf] V R [V] +105 C 4,7 6,3 5,5 x 12,0 0,19 2,900 8,70 34, ,8 6,3 5,5 x 12,0 0,19 2,700 8,10 32, ,3 5,5 x 12,0 0,19 2,500 7,50 30, ,3 5,5 x 12,0 0,19 2,300 6,90 27, ,3 5,5 x 12,0 0,19 2,100 6,30 25, ,3 5,5 x 12,0 0,19 1,900 5,70 22, ,3 5,5 x 12,0 0,19 1,700 5,10 20, ,3 5,5 x 12,0 0,19 1,500 4,50 18, ,3 5,5 x 12,0 0,19 1,300 3,90 16, ,3 5,5 x 12,0 0,19 0,900 2,70 11, ,3 6,8 x 12,5 0,19 0,600 1,80 6, ,3 8,7 x 12,7 0,19 0,450 1,35 4, ,3 8,7 x 12,7 0,19 0,350 1,05 4, ,3 10,0 x 12,7 0,19 0,250 0,78 3, ,3 10,0 x 16,5 0,19 0,190 0,57 2, ,3 10,0 x 21,0 0,19 0,140 0,42 1, ,3 12,5 x 21,0 0,21 0,095 0,28 1, ,3 12,5 x 25,0 0,23 0,070 0,21 0, ,3 16,5 x 22,0 0,25 0,060 0,18 0, ,3 16,5 x 26,0 0,29 0,048 0,14 0, ,3 16,5 x 36,5 0,43 0,040 0,13 0, ,3 18,0 x 30,0 0,45 0,034 0,10 0, ,3 18,0 x 36,5 0,50 0,032 0,08 0, ,3 10 5,5 x 12,0 0,19 2,900 8,70 34, ,7 10 5,5 x 12,0 0,19 2,500 7,50 30, ,8 10 5,5 x 12,0 0,19 2,250 6,75 27, ,5 x 12,0 0,19 2,000 6,00 24, ,5 x 12,0 0,19 1,800 5,40 21, ,5 x 12,0 0,19 1,300 3,90 14, ,5 x 12,0 0,19 1,300 3,90 16, ,5 x 12,0 0,19 1,300 3,90 16, ,5 x 12,0 0,19 1,300 3,90 16, ,5 x 12,0 0,19 1,300 3,90 16, ,5 x 12,0 0,19 0,900 2,70 11, ,8 x 12,5 0,19 0,600 1,80 6, ,7 x 12,7 0,19 0,350 1,05 4, ,7 x 12,7 0,19 0,350 1,05 4, ,0 x 12,7 0,19 0,250 0,78 3, ,0 x 16,5 0,19 0,190 0,57 2, ,0 x 21,0 0,19 0,140 0,42 1, ,5 x 21,0 0,21 0,095 0,28 1, ,5 x 25,0 0,23 0,070 0,21 0, ,5 x 26,0 0,25 0,060 0,18 0, ,5 x 30,0 0,29 0,048 0,14 0, ,5 x 36,5 0,33 0,043 0,13 0, ,0 x 36,5 0,38 0,032 0,10 0, Ordering example: 47µF 100V ±20%, 10,0 x 16,5mm, cut 4,5mm
4 Rated Rated Size cap. voltage D x L [mm] C R [µf] V R [V] tan δ 100Hz +20 C Z [Ω] 100kHz I~ [ma]* 100kHz +105 C +20 C -10 C -40 C 2,2 16 5,5 x 12,0 0,16 2,900 8,70 34, ,3 16 5,5 x 12,0 0,16 2,500 7,50 30, ,7 16 5,5 x 12,0 0,16 2,250 6,75 27, ,8 16 5,5 x 12,0 0,16 2,000 6,00 24, ,5 x 12,0 0,16 1,500 4,50 16, ,5 x 12,0 0,16 1,400 4,20 16, ,5 x 12,0 0,16 1,300 3,90 16, ,5 x 12,0 0,16 1,300 3,90 16, ,5 x 12,0 0,16 1,300 3,90 16, ,5 x 12,0 0,16 0,900 2,70 11, ,8 x 12,5 0,16 0,600 1,80 7, ,8 x 12,5 0,16 0,470 1,40 5, ,7 x 12,7 0,16 0,350 1,05 4, ,7 x 12,7 0,16 0,350 1,05 4, ,0 x 12,7 0,16 0,250 0,75 2, ,0 x 16,5 0,16 0,190 0,58 2, ,0 x 21,0 0,16 0,140 0,42 1, ,5 x 25,0 0,16 0,095 0,29 1, ,5 x 25,0 0,18 0,070 0,21 0, ,5 x 26,0 0,20 0,060 0,18 0, ,5 x 30,0 0,20 0,048 0,14 0, ,5 x 36,5 0,22 0,040 0,12 0, ,0 x 30,0 0,24 0,035 0,11 0, ,5 25 5,5 x 12,0 0,14 3,150 9,45 37, ,2 25 5,5 x 12,0 0,14 2,750 8,25 33, ,3 25 5,5 x 12,0 0,14 2,250 6,75 27, ,7 25 5,5 x 12,0 0,14 2,000 6,00 20, ,8 25 5,5 x 12,0 0,14 1,750 5,25 18, ,5 x 12,0 0,14 1,500 4,50 16, ,5 x 12,0 0,14 1,500 4,50 16, ,5 x 12,0 0,14 1,500 4,50 16, ,5 x 12,0 0,14 1,300 3,90 16, ,5 x 12,0 0,14 1,300 3,90 16, ,5 x 12,0 0,14 0,900 2,70 11, ,8 x 12,5 0,14 0,600 1,80 7, ,8 x 12,5 0,14 0,440 1,38 5, ,7 x 12,7 0,14 0,330 0,99 4, ,0 x 12,7 0,14 0,250 0,75 2, ,0 x 16,5 0,14 0,190 0,57 2, ,0 x 21,0 0,14 0,130 0,40 1, ,5 x 21,0 0,14 0,085 0,26 0, ,5 x 26,0 0,14 0,075 0,22 0, ,5 x 26,0 0,14 0,060 0,18 0, ,5 x 30,0 0,14 0,048 0,14 0, ,5 x 36,5 0,16 0,037 0,11 0, ,0 x 36,5 0,18 0,035 0,10 0, Ordering example: 47µF 100V ±20%, 10,0 x 16,5mm, cut 4,5mm
5 Rated Rated Size tan δ Z [Ω] 100kHz I~ [ma]* cap. voltage D x L [mm] 100Hz +20 C +20 C -10 C -40 C 100kHz C R [µf] V R [V] +105 C 1,0 35 5,5 x 12,0 0,12 3,500 10,50 35, ,5 35 5,5 x 12,0 0,12 3,050 9,15 30, ,2 35 5,5 x 12,0 0,12 2,600 7,80 26, ,3 35 5,5 x 12,0 0,12 2,250 6,75 22, ,7 35 5,5 x 12,0 0,12 2,000 6,00 20, ,8 35 5,5 x 12,0 0,12 1,720 5,16 17, ,5 x 12,0 0,12 1,500 4,50 16, ,5 x 12,0 0,12 1,380 4,20 16, ,5 x 12,0 0,12 1,300 3,90 16, ,5 x 12,0 0,12 1,300 3,90 16, ,8 x 12,5 0,12 0,750 2,20 8, ,8 x 12,5 0,12 0,510 1,55 6, ,7 x 12,7 0,12 0,330 0,99 4, ,7 x 12,7 0,12 0,290 0,87 3, ,0 x 12,7 0,12 0,250 0,75 2, ,0 x 16,5 0,12 0,200 0,60 2, ,0 x 21,0 0,12 0,140 0,42 1, ,5 x 21,0 0,12 0,100 0,31 1, ,5 x 25,0 0,12 0,070 0,21 0, ,5 x 26,0 0,12 0,060 0,18 0, ,5 x 30,0 0,12 0,048 0,14 0, ,5 x 36,5 0,14 0,038 0,11 0, ,0 x 36,5 0,14 0,037 0,11 0, , ,5 x 12,0 0,08 4,500 9,00 30, ,0 50 5,5 x 12,0 0,08 3,500 9,00 30, ,5 50 5,5 x 12,0 0,08 3,000 9,00 30, ,2 50 5,5 x 12,0 0,08 2,500 7,50 25, ,3 50 5,5 x 12,0 0,08 2,500 7,50 25, ,7 50 5,5 x 12,0 0,08 2,500 7,50 25, ,8 50 5,5 x 12,0 0,08 2,500 7,50 25, ,5 x 12,0 0,08 2,500 7,50 25, ,5 x 12,0 0,08 2,300 6,75 22, ,5 x 12,0 0,08 2,000 6,00 20, ,8 x 12,5 0,08 1,000 3,00 10, ,8 x 12,5 0,08 1,000 3,00 10, ,8 x 12,5 0,08 0,750 2,25 7, ,7 x 12,7 0,08 0,500 1,50 5, ,0 x 12,7 0,08 0,350 1,10 4, ,0 x 16,5 0,08 0,250 0,75 2, ,0 x 21,0 0,08 0,190 0,57 2, ,5 x 21,0 0,08 0,130 0,39 1, ,5 x 22,0 0,08 0,090 0,32 1, ,5 x 26,0 0,08 0,080 0,24 0, ,5 x 30,0 0,10 0,070 0,21 0, ,5 x 36,5 0,10 0,060 0,18 0, ,0 x 36,5 0,12 0,044 0,13 0, Ordering example: 47µF 100V ±20%, 10,0 x 16,5mm, cut 4,5mm
6 Rated Rated Size cap. voltage D x L [mm] C R [µf] V R [V] tan δ 100Hz +20 C Z [Ω] 100kHz I~ [ma]* 100kHz +105 C +20 C -10 C -40 C 0, ,5 x 12,0 0,07 4,500 9,00 30, ,0 63 5,5 x 12,0 0,07 3,500 9,00 30, ,5 63 5,5 x 12,0 0,07 3,000 9,00 30, ,2 63 5,5 x 12,0 0,07 2,500 7,50 25, ,3 63 5,5 x 12,0 0,07 2,500 7,50 25, ,7 63 5,5 x 12,0 0,07 2,500 7,50 25, ,8 63 5,5 x 12,0 0,07 2,500 7,50 25, ,5 x 12,0 0,07 2,500 7,50 25, ,5 x 12,0 0,07 1,900 5,50 20, ,8 x 12,5 0,07 1,200 3,60 15, ,8 x 12,5 0,07 1,200 3,60 15, ,7 x 12,7 0,07 0,560 1,68 6, ,7 x 12,7 0,07 0,560 1,68 6, ,0 x 12,7 0,07 0,560 1,68 6, ,0 x 16,5 0,07 0,400 1,25 4, ,0 x 21,0 0,07 0,270 0,80 3, ,5 x 21,0 0,07 0,160 0,48 2, ,5 x 25,0 0,07 0,140 0,42 1, ,5 x 26,0 0,07 0,095 0,30 1, ,5 x 30,0 0,07 0,060 0,18 0, ,0 x 30,0 0,08 0,050 0,15 0, ,0 x 36,5 0,08 0,036 0,11 0, , ,5 x 12,0 0,07 6,000 18,00 60, , ,5 x 12,0 0,07 6,000 18,00 60, , ,5 x 12,0 0,07 5,000 15,50 50, , ,5 x 12,0 0,07 4,500 13,50 45, , ,5 x 12,0 0,07 4,500 13,50 45, , ,5 x 12,0 0,07 4,500 13,50 45, , ,8 x 12,5 0,07 2,500 7,50 25, ,8 x 12,5 0,07 1,200 3,60 22, ,8 x 12,5 0,07 1,000 3,00 19, ,7 x 12,7 0,07 0,800 2,80 15, ,0 x 12,7 0,07 0,700 2,50 13, ,0 x 16,5 0,07 0,500 1,75 12, ,0 x 21,0 0,07 0,430 1,50 10, ,5 x 21,0 0,07 0,350 1,25 8, ,5 x 25,0 0,07 0,230 0,80 5, ,5 x 26,0 0,07 0,110 0,40 2, ,5 x 26,0 0,07 0,110 0,40 2, ,5 x 30,0 0,07 0,080 0,28 2, ,0 x 30,0 0,07 0,065 0,23 1, ,0 x 36,5 0,07 0,047 0,17 1, Ordering example: 47µF 100V ±20%, 10,0 x 16,5mm, cut 4,5mm
7 Rated ripple current: Temperature multipliers from 105 C Ambient temperature 105 C 85 C 65 C 45 C Multipliers 1 1,7 2,2 2,7 Rated ripple current: Frequency multipliers from 100kHz Rated voltage Frequency V R [V] 100kHz 10kHz 1kHz 100Hz 6,3; 10 Ø 8,7 1,00 0,96 0,86 0,70 Ø 10,0 1,00 0,98 0,95 0,85 16; 25; 35 Ø 5,5 ( 10µF) 1,00 0,91 0,68 0,35 Ø 6,8 (> 10µF to < 100µF) 1,00 0,95 0,80 0,50 Ø 6,8 ( 100µF) 1,00 0,97 0,88 0,69 50 Ø 5,5 1,00 0,96 0,85 0,60 63 Ø 5,5 ( 3,3µF) 1,00 0,91 0,68 0,35 Ø 5,5 1,00 0,96 0,85 0, Ø 5,5 1,00 0,90 0,60 0,30 Ø 6,8 to 12,5 1,00 0,93 0,75 0,40 Ø 16,5 1,00 0,95 0,85 0,45 All information provided in printed form needs for her legal obligation for the purposes of 463 and 480 II Civil Code of the explicit written confirmation. Hence, the given data imply exclusively a product description and are not to be understood as assured qualities
handbook, 050/052 4 columns smaller
4/5 PED-ST FEATURES Polarized aluminium electrolytic capacitors, non-solid Large types, cylindrical aluminium case, insulated with a blue sleeve Also available in bolt version (PED-STB) Pressure relief
Aluminum Capacitors Radial Miniature, High Voltage
152 RMH Aluminum Capacitors Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( x L in mm) 10 x 12 to 18 x 35 Rated capacitance range, C R 1.0 to 220 µf Tolerance on C R
Aluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
Leakage current 2 P 1 U 5 E P 0.5. Configuration. φ D. (mm) 6.3 ED 8 10 PD 12.5 to 18
Low Impedance, High Reliability High reliability withstanding 0 hour load life at +5 C (3000/ hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values
DATA SHEET. 048 RML Aluminum electrolytic capacitors Radial Miniature Long-Life. BCcomponents
DATA SHEET Supersedes data of January 998 File under, BC0 000 Jan 8 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with pressure relief,
Aluminum Capacitors Radial Very Low Impedance
6 RVI Aluminum Capacitors FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with RoHS COMPLIANT pressure relief, insulated with a blue vinyl
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing handbook, 2 columns SMD-version, rectangular case, insulated Miniaturized, high CV per unit volume, low height Flexible terminals,
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance
Aluminum Electrolytic Capacitors Radial, Enhanced High Temperature, Low Impedance 40 RTM lower Z longer life 25 C 50 C 50 RMI 46 RTI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance 36 RVI miniaturize FEATURES Very long useful life: 4000 h to 0 000 h at 05 C, high stability, high reliability Very low impedance and low
Aluminum Electrolytic Capacitors Radial Miniature Long Life
Aluminum Electrolytic Capacitors Radial Miniature Long Life 6 RLL lower CV-values RMH high voltage longer life 6 RVI miniaturized 0 RMI lower miniaturized 8 RUS Fig. QUICK REFERENCE DATA DESCRIPTION VALUE
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B.
Aluminum Electrolytic Capacitors Axial High Temperature High Voltage for E.L.B. 04-043 ASH standard 04/043 AHH-ELB 550 V/4 h Fig. 85 C 04/043 AMH-ELB 550 V/4 h FEATURES Useful life: 0 000 h at 05 C Stable
Aluminum Capacitors Axial Miniature, Long-Life
8 AML 0 ASM Fig. Component outlines smaller dimensions 8 AML Aluminum Capacitors longer life 8 AHT 0 ATC FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical
Aluminum Electrolytic Capacitors Axial Standard
00/0 AS Aluminum Electrolytic Capacitors Axial Standard 04/04 ASH high voltage 00/0 AS smaller dimensions 0 ASM Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 0 to
KF Series. -40 to to 100 VDC 0.47 to F
Low Impedance Features Used in communication equipments, switching power supply, industrial measuring instruments, etc. Load life 000~000 Hrs at Safety vent construction design. For detail specifications,
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical
Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
Aluminum Capacitors SMD (Chip) Long Life Vertical
Not for New Designs - Alternative Device: 53 CRV 53 CLV 40 CLH FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction
Aluminum Capacitors Power Long Life Snap-In
0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated
Aluminum Electrolytic Capacitors Radial Semi-Professional
Aluminum Electrolytic Capacitors Radial Semi-Professional 03 RLC low leakage current 8 RUS higher CV- values miniaturized 038 RSU ig. longer life RLL QUICK REERENCE DATA DESCRIPTION VALUE Nominal case
Aluminum Capacitors SMD (Chip) Long Life Vertical
Aluminum Capacitors SMD (Chip) Long Life Vertical FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing SMD-version with base plate, vertical construction requiring minimum
RFB Series (High R.C., Long Life) MERITEK
FEATURES Low impedance and long life withstanding 10000 hours load life. Suitable for electronic ballast, adaptor and switching power. SPECIFICATIONS Item Operating Temp Range Rated Working Voltage Capacitance
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
Aluminum Capacitors SMD (Chip) Standard. Table 1
085 CS Aluminum Capacitors Fig.1 Component outlines longer 085 CS 139 CLL life QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8.8 x 3.7 x 3.9 and 11.9 x 3.7 x 3.9 Rated capacitance
Aluminum Capacitors SMD (Chip), High Temperature
Not Recommended for New Designs, Use 50 CR Aluminum Capacitors SMD (Chip), High Temperature 50 CL 53 CRV Lead (Pb)-free 40 CLH 5 C high temperature 53 CLV Fig. low 50 CL QUICK REFERENCE DATA DESCRIPTION
Highlights. 25, 35, 50, 63, 80 Vdc. RoHS Compliant A (± 0.2) L ( ± 0.3) D (± 0.5) Capacitor Markings Voltage Code
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Rated for 15 C, type HZA combines the advantages of aluminum electrolytic and aluminum polymer technology. These hybrid
Aluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance High Vibration Capability FEATURES Useful life: up to 2000 h at 50 C High reliability Low ESR Polarized aluminum electrolytic
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Aluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
Aluminum Capacitors Power Standard Miniature Snap-In
Aluminum Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request 0/0 PLL-SI VALUE
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance
Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES Long useful life: up to 5000 h at 105 C Very low ESR and highest ripple current SMD-version with base plate, lead (Pb) free reflow
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In
Aluminum Electrolytic Capacitors Power Standard Miniature Snap-In Fig. QUICK REFERENCE DATA DESCRIPTION / PUM-SI smaller dimensions 0/0 PSM-SI long life 0 C Note () A 0 V range is available on request
K04 TYPE -40 C +85 C 20000H
K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.
25, 35, 50, 63 Vdc. RoHS Compliant. Size Code ± 0.5 ± 0.3. F to
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Using a ruggedized construction, type HZC_V withstands a 30 G vibration test. As the main countermeasure to vibration, the
APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
Aluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors FEATURES Load life: 2000 h at 105 C Extra low impedance, high ripple current Polarized SMD aluminum electrolytic capacitors, non solid electrolyte Material categorization: for definitions
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature, Low Impedance, High Vibration Capability FEATURES Extended useful life: up to 6000 h at 25 C Polarized aluminum electrolytic capacitors, non-solid
50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
Aluminum Electrolytic Capacitors Power Long Life Snap-In
Aluminum Electrolytic Capacitors Power Long Life Snap-In PUL-SI smaller dimensions 0/0 PLL-SI Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability
Aluminum Electrolytic Capacitors SMD (Chip), Very Low Z, High Vibration Capability FEATURES Extended useful life: up to 0 000 h at 05 C Polarized aluminum electrolytic capacitors, non-solid electrolyte,
Double Layer Capacitors
96 DLC Double Layer Capacitors Form A Fig. Component outline Form B FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Resin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
CB Series Tantalum Capacitor
Features: Lead-Free Specially designed of general purpose Highly reliable resin dipped type Excellent frequency and temperature characteristics Non-flammable epoxy resin Technical Specifications: Item
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount
Funkentstör-Kondensatoren der Klasse X2
STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
Aluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
Product Specification HYCAP HIGH TEMP, EXTREME SHOCK &VIBRATION. Family >>> HCD HC2D HC3D Max mass 18g 15g 15.5g
CPCITOR HYCP HIGH TEMP, &VIBRTION DTE 3/14/16 1.0 SCOPE This document contains specific electrical, mechanical, and environmental requirements and specifications for double- sealed, axial- leaded hybrid
Electrolytic Capacitor Product Specification. Scope P.1 Performance P.1 Marking P.4 Catalog Numbering P.4 Dimensions and Appearance P.
CA SERIES Page No Contents Scope P.1 Performance P.1 Marking P.4 Catalog Numbering P.4 Dimensions and Appearance P.5 Parts Lists P.6~8 CA SERIES 1 I.Scope This standard defines characteristics and dimensions
Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors
Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness
Metallized Polyester PCMT 369 film capacitors
MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5 mm (reduced pitch ; 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) Capacitance tolerance Rated voltage V Rdc Climatic
Aluminum Capacitors Radial Low Leakage Current
Aluminum apacitors Radial Low Leakage urrent 3 RL 3 RL standard leakage current ig. 36 RSP QUK REERENE DATA DESRPTON VALUE Nominal case sizes (Ø D x L in mm) 5 x and 8.2 x Rated capacitance range, R 2.2
Interference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product Specification Product specification
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
Product Specification January 12, 2016 V.6 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free
Metallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 26, 2015 V.12 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
Summary of Specifications
Y5U Ceramic Radial Lead High CV 25 C Maximum Temperature Actual Size The series are radial lead ceramic capacitors from UCC/NCC. These capacitors have a very low and impedance which makes these capacitors
Product Specification
Product Specification NUMBER TDD2 HYBRID CAPACITOR ISSUE 01 REVISION E ECC-13-029 DATE 10-1-13 1.0 Scope This document contains specific electrical, mechanical, and environmental requirements and specifications
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
CB Series Tantalum Capacitor
Features: Lead-Free Specially designed of general purpose Highly reliable resin dipped type Excellent frequency and temperature characteristics Non-flammable epoxy resin Technical Specifications: Item
Automotive & Industrial Systems Company, Panasonic Co., Ltd.
208 ZS Automotive & Industrial Systems Company, Panasonic Co., Ltd. 8 9 Conductive Polymer ybrid Aluminum Electrolytic Capacitor EEZSE56P 25V560μF Φx6.5 ZS-2 EEZSV47P 35V470μF Φx6.5 ZS-3 EEZS22P 50V220μF
Energy Storage Double Layer Capacitors
96 DLC Energy Storage Double Layer Capacitors FEATURES Polarized capacitor with high charge density, alternative product to rechargeable backup batteries Dielectric: electric double layer Radial leads,
FEATURES STANDARD CONFIGURATION
Metallized Polypropylene 5MP1 SERIES Metallized Polypropylene Metallized Polypropylene and Military Styles CFR13 and CFR14."Hi-Rel" replacement for electrolytics for a broad range of commercial and military
AREP Series Aluminum Solid Electrolytic Capacitors Aluminum Solid Electrolytic Capacitors
Features -Super low ESR, high ripple current capability -Rated voltage:6.3~35vdc -Endurance:5,000 hours at 105ºC -Suitable for DC-DC converters, voltage regulators and decoupling applications -RoHS Compliant
FEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
Standard EIA Color Code Table
Standard EIA Color Code Table BAND: ±%, ±%, AND ±% st Band nd Band rd Band th Band Color st Band (st figure) nd Band (nd figure) rd Band (multiplier) th Band (tolerance) Black Brown Red Orange Yellow Green
Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type
Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,
FEATURES. Note 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 C
Wet Tantalum Capacitors Silver Case TANTALEX Capacitors Hermetically-Sealed FEURES Terminations: axial, standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Model is the commercial
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, Y5V
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 47 µf RoHS compliant & Halogen Free Product Specification Product specification
DATA SHEET. SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R. 4 V TO 50 V 100 pf to 100 µf
Product Specification March 31, 2014 V.17 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 100 µf RoHS compliant & Halogen free Product
Aluminum Capacitors C, Miniature, Radial Lead
FEATURES Original SMPS output capacitors Minimal ESR change High ripple current capability Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION Nominal case size Ø D x L in mm VALUE 0.394" x 0.472"
UPDATE. Summary of Specifications
UPDAE oroidal Design Screw Mount Lowest hermal Resistance Optimum Cooling Capability New Lower Profile s New eat Sink Mounting Kit RoS Compliant he series available in low profile sizes offers high capacitance
100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
Hermetically Sealed, Axial-Lead to CECC Specifications
Hermetically Sealed, Axial-Lead CTS1, CTS13, 749DX FEATURES Terminations: Tin/lead (SnPb), 100 % tin (RoHS compliant) Hermetically sealed metal case with plastic film insulation Extended capacitance range
DC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
Pilkor components Metallized Polypropylene Film Capacitors PCPW 225 ( Switching Application ) APPLICATIONS
QUICK REFERENCE DATA Capacitance range Capacitance tolerance Rated voltage (V Rdc ) Non recurrent surge voltage (Vpk) Max. repetitive peak voltage (Vpkr) Max. non-repetitive peak current (Ipkr) Dissipation
CAPACITORS, FIXED, TUBULAR, POROUS TANTALUM CATHODE AND ANODE, GELLED ELECTROLYTE, HERMETICALLY SEALED BASED ON TYPE ST79
Pages 1 to 15 CAPACITORS, FIXED, TUBULAR, POROUS TANTALUM CATHODE AND ANODE, GELLED ELECTROLYTE, HERMETICALLY SEALED BASED ON TYPE ST79 Issue 1 November 2007 Document Custodian: European Space Agency -
Applications. Rated Voltage (VDC) 100 = = = = = = = = = = = = 63
Surface Mount Aluminum Electrolytic Capacitors EDH, +105 C Overview Applications The KEMET EDH aluminum electrolytic surface mount capacitors are designed for high density printed circuit boards. Typical
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 33 nf RoHS compliant & Halogen Free Product Specification August 05, 2011 V.8 Product specification
DC Film Capacitors MKT Radial Lacquered Type
DC Film Capacitors MKT Radial Lacquered Type FEATURES Available taped and loose in box Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking and
SL Series 85 SMD Ecap
Features: Designed for surface mounting on high density PC board Supplied with carrier taping for automatic mounting machine Guarantees 2,000 hours at 85 C Specifications Item Operating Temperature Range
Snubber MMKP 386 AC and pulse double metallized film capacitor
Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP
Aluminum Capacitors + 85 C, Miniature, General Purpose
500D Aluminum Capacitors FEATURES Increased CV efficiency New 0.709" [18.0 mm] diameter case size Fig.1 Component outline QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size 0.248" x 0.512" [6.3 x
ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET
TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING
WCAP-AS5H Aluminum Electrolytic Capacitors
A Dimensions: [mm] B Recommended hole pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 0.25V; 120Hz C 10 µf ± 20% Rated voltage U R 16 V (DC) max. Leakage
/ NTSSeries NTFSeries Temperature cycle : 1000 cycles
/ NTSSeries NTFSeries Temperature cycle : 00 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle
ALUMINUM ELECTROLYTIC CAPACITORS Capacitor Life
1 of 8 5/12/2008 10:23 PM Home About Us Products Contact Us Info Other Links Aluminum Part # Search ALUMINUM ELECTROLYTIC CAPACITORS Capacitor Life Table of Contents Capacitor Life The life of aluminum
EMI Suppression PCRC 420 film capacitors (RC unit)
MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R 100 V TO 630 V 0.47 pf to 470 nf RoHS compliant & Halogen Free Product Specification Product specification 2 SCOPE This specification
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 12, 17 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
TYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D
Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics
Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved
Solid-Electrolyte TANTALEX Capacitors, Hermetically Sealed, Axial-Lead, CECC Approved PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (types CTS13) -55 C to +125 C (types CTS1, 749DX)
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
Product Specification DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free Product specification
Applications. Rated Voltage (VDC) 016 = = = = 50
Surface Mount Aluminum Electrolytic Capacitors EDT, +125 C Overview Applications The KEMET EDT aluminum electrolytic surface mount capacitors are designed for applications requiring high operating temperatures
Applications. Rated Voltage (VDC) 035 = = = = 100 6R3 = = = = 25
Surface Mount Aluminum Electrolytic Capacitors EDE Series, +105ºC Overview Applications KEMET s EDE Series of aluminum electrolytic surface mount capacitors are designed for high density printed circuit
Epoxy-coated Solid Electrolytic Tantalum Capacitors (LEAD FREE) TCR Series (LEAD FREE)
1. Scope This specification applies to. 2. Product identification T C R S 1 (1) (2) (3) (4) (5) (6) (7) Part no. Designation: (1) series: TCR represent series number of epoxy-coated solid electrolytic